denoise.md §15: why Best became one network, how it compares with the
mixture and Medium on real photographs and the chart, the candidates that
fell short, the file names, the saved-edit numbering, and the timings on
the 3050 -- 0.51-0.54 s whole-frame, 0.95 s in tiles, against 2.60 s for
the mixture in tiles. The manual lists Bilinear, Fast and Best, says an
edit made with Medium opens with Best, and gives the new time; Medium's
close-up goes.
The manual's AI denoise section names the four methods and their measured
times, and shows the lamp and railing of the ISO 8000 frame at 1:1 by each
in place of the film and the before/after pair. The scene clicks each
method and waits for that network's result: the repair now logs its own
"learned denoise:" line first, so the wait matches the result's.
On for every raw, at the top of the Adjust panel, kept once computed,
and eased off with Strength rather than Keep grain. The timing line is
left as it was; the new model's measured figure replaces it when that
branch lands. The animation still shows the Keep grain slider and
wants recording again.
A section after Looking closer: what it is for, the switch and its wait,
Keep grain, which cameras it takes and where its noise figures come from.
The scene opens the Brooklyn Bridge at ISO 8000 from the face-free demo
set at 1:1, switches it on, waits for the result to land and keeps some
grain, with a still before and after. It waits on the app's own log line
rather than a fixed time: the network takes seconds on a GPU and more on
the CPU, which is where the recording X server leaves it (13 s).
The panorama scene now ends in the grid, on the composite in its wide
cell beside the twelve frames it was made from, with the thumbnail the
merge made: the picture is taken straight after the merge, before any
rescan could have found the file. The manual's library section says how
a panorama's cell is sized and packed, and its panorama section that the
composite is in the grid the moment it is written. panorama.md §9 records
the race that kept it out, the catalogue-then-register path that
replaced it, how the thumbnail is developed, and the layout's classes.
A 22 927 × 8966 Lightroom panorama of a glacier, opened in develop:
the wheel in from fit to the peaks, a slow pan along the ridge at that
zoom, back out, then 1:1 with a double-click and fit with another. The
scene borrows the file from outside the demo library, copies it into a
panorama folder, restarts so the scan finds it, and deletes it and the
sidecar the app writes beside it before restarting again; it is
registered last so no other scene sees it.
The film is fine ice and rock in every frame and was 22 MB at the
usual 960 px and ten frames a second, so a scene can now name its own
GIF size (GIF_SIZE, read by record.sh through `scenes.py gif`); this
one is 640 px at eight, 8.7 MB.
D19 changed how every raw photograph renders, so every picture was
stale; all forty are recorded again from this tree. Beside the ones
already in the page there is now one for Tone Mapping: an alpine frame
whose clouds sit near white, its White Point raised to bring them back
and lowered for a brighter picture, its Contrast raised, then Before.
The panorama film unticks the first frame and ticks it back, so the
Frames list and the re-solve show; it no longer films minutes of
"Reading the frames", cutting from the first seconds of the job to the
alignment. The manual's presets menu opens beside the rail, not beside
the photograph.
ARCH §5.3 still described only a tile cache nobody built; it now says
what 0.19.0 tiles and what it does not: a linear DNG past PROXY_EDGE
opens on a reduced copy, a finer render samples a full-resolution
window, and the export is cut into halo-grown tiles. display-and-
extension.md's FR-DSP-2 row said absent, outstanding.md said the halo
had nothing to read it and that such a file fell to the embedded
preview.
rawler now builds from third_party, which ARCH's stack table and §3.2,
the root Cargo.toml's comment ("two upstream crates ... for Android")
and third_party/README.md's bump procedure did not know; the README
also names each vendored crate's licence. panorama.md and the manual
say a composite this wide develops and exports.
panorama.md still had a frame that did not fit end the job, and FR-MRG-5
still said the merge stops; since 621a6b83 the frame is named on its
row and unticked, and the rest are solved again from the pairs already
matched. §15 records the split of align into match_pairs and solve and
why re-aligning a subset from scratch moved every RANSAC seed, and the
rule e98b1def gave a blown sample, which §8's "nothing about being a
RAW is lost" now mentions. The manual says where the boxes are and
what an unplaceable frame does to Merge.
The presets menu and sheet listed every preset under flat section
headings, seventy rows to scroll past. They now list folders, closed
until opened, with how many presets each holds; opening one shows what
is inside it, folders and presets indented beneath.
A category is spelled in the name: "Portraits/Warm skin" is Warm skin
in a Portraits folder under Yours. The file format does not change, so
an older build lists the whole path as the name; renaming a preset is
how it moves, and saving or renaming into a folder opens the way to it.
A Lightroom import names what it reads after the folders below the one
chosen, and a "/" in a displayed name becomes "∕" so it files nothing.
The shipped film sections become Film › Colour, Cinema and Black and
white.
The tree is built and flattened in Rust (PresetTree), each row carrying
its depth, and which folders are open is remembered for the session.
A PopupWindow keeps the size it was shown at, so a folder opened in the
menu pushed its contents under "Save or manage…"; the menu is shown
again after each toggle to take its new height. That is a function on
the rail because Slint 1.17 generates Rust that does not compile for a
popup's close() reached from inside the popup. The sheet's list takes a
preferred height of up to 400px, since a Flickable reports next to
nothing and an opened folder showed three rows.
The manual describes the folders and naming. Its pictures show the menu
with Film › Colour open, and a black-and-white stock applied from Film
› Black and white; the scenes aim popup rows from the rail's entry, and
pick the menu's "Film" over the develop column's film chooser.
The Light group gains `Tone Mapping`, and a film stock now takes its
place at the end of the chain rather than sitting after exposure (D19).
Say what the two sliders do and why every adjustment above them works on
the scene, highlights beyond white included. The pictures still show the
old rendering and are re-recorded separately.
Presets were a "Presets…" button in develop's top bar that opened a
sheet over the photograph, so applying one was two clicks with the
picture covered. They are now an entry pinned to the bottom of the tool
rail, apart from the tools because a preset arms nothing, and it opens a
menu beside the rail: the same sectioned rows the sheet lists, one click
to apply to the open photograph. The menu's last row, "Save or manage…",
opens the sheet, which keeps saving, renaming, reverting and importing,
since those take a name or a path.
The menu is a PopupWindow for the film list's reasons, with the list in
a clipped box of its own; the Flickable alone let its last row draw over
the manage row. Choosing from it zeroes preset-apply-count before
applying, since the grid may have left its selection count there.
The manual says where presets are now and gains a picture of the open
menu. The scenes reach the sheet through the menu and aim the manage
row from the rail's entry, as the film list's rows are aimed, because
the automation reports a popup's elements in the popup's coordinates.
The manual described film in a mask layer (6b99f67) with no picture of
it, and the paragraph named the control `Print exposure` where the
panel says `Print Exposure`.
A new scene, film_local, sets Kodak Ektar 100 on an upright alpine
frame — a negative, so it is printed and has a print exposure — then
adds a linear gradient, turns it by its rotate handle to fall from the
top, moves it onto the sky, shows the mask as its edge so the print
stays visible, and raises the layer's Print Exposure to burn the sky
in. Done Masking, then Before held. It puts the masks back to Tint
before undoing, as the other scenes expect.
The picture follows the film list's, under the paragraph it
illustrates. The bundled manual is regenerated to match.
fc54523 (0.18.1) stopped running a layer as a second chain after every
global operation and made its settings offsets applied at each
operation's own place, and nothing outside the code said so. The
manual still read as though a mask's slider were a setting of its own,
frame-budget.md described the masks as "a separate chain per layer",
and no document said how a layer is blended at all.
architecture.md §5.2 now says it: the offset, the blend by the layer's
weighted difference from the global result, what a photograph with no
layers composes to, and the film as the one operation whose settings
are averaged instead (6b99f67). FR-DEV-3 records the change as resolved
beside its local-adjustments bullet, frame-budget.md's note on what it
does not measure describes the cost as it now is, and the manual gives
the arithmetic in one sentence: -20 in a mask over -30 is -50 there.
The bundled manual is regenerated to match.
The manual said the lists on a tablet scroll by flick alone, and
outstanding.md §4a that Android had no scrollbars by design. Both now
describe the cue from #69: a thin line while the view moves, gone once
it stops, that a flick starting on it passes through; and §4a notes
DR_SCROLL_CUE for looking at it on a desktop, and that it is not yet
checked on the tablet. The bundled manual is regenerated to match.
A layer offered the film's sliders and they moved nothing: its copy of
the node was never given the stock, so it stayed inactive. Film now
works in a layer the way the other adjustments do, as offsets to the
photograph's settings, but blended as settings rather than as results,
since a film is a rendering and cross-fading two developments is not
what a region on a pushed film looks like.
- dr-film bakes no slider. Exposure is a gain in the shader; push
interpolates the stock's measured processes, one curve row each; the
print is split at the paper's log exposure, so print exposure is an
addition between two lookups and exact at any setting. The enlarger
stays balanced at the photograph's exposure.
- film_sim reads all four settings as uniforms, format one-hot over a
grain count per format, so every uniform is linear in what it does.
- Operation::blends_settings lets the composer average each overlapping
layer's uniforms with the global ones by mask weight, the global
setting taking whatever weight the layers leave, and run the fragment
once. Three layers at full weight give the mean of their settings.
- The stock picker is hidden on a layer. Only the photograph's exposure
re-solves the print balance; push, print exposure and format need no
rebake at all now.
Blue sky, Deep blue sky, Polariser, and Blue sky with golden land, in a
Skies section after Essentials. Each darkens the colour mixer's azure and
blue bands and adds chroma to them — what a polarising filter does to a
clear sky — and brings the highlights down with it, so a white cloud does
not read as a cut-out against the deeper blue. The stronger ones nudge
azure towards blue and add dehaze.
They are looks and work only on the hues a sky occupies, so an overcast
frame is left nearly alone: there is no blue for them to deepen, and
tinting grey cloud blue would be worse than doing nothing. Tuned by eye on
the demo library's alpine and Manhattan frames, with an overcast Étretat
frame as the control.
Every scene is recorded again on the 0.17.0 build, because the header
(Export to Exports), the sidebar (Albums) and the develop column had
all moved. The launch pictures showed the typed folder field, and the
export settings "Export to"; the presets picture predated the sections.
New scenes: presets_film scrolls the sheet down through the shipped
sections and applies Ilford HP5 Plus, a look that changes the film and
nothing else; albums exports four New York frames to an album, selects
it to show the originals behind its files, and opens a new album's
sheet before deleting what it made. record.sh now points the profile's
old export folder at DR_HOME/Exports, which the app turns into the
album "Exports" on first open - the one way to have an album without
the portal's dialogue, which Xvfb cannot show. The launch scene signs
out of a remembered folder instead of typing one, so it shows
"Open folder" beside the folder used last.
Not recorded: the server browser's New folder, which needs a Nextcloud
server, and the download screen, which a folder library never reaches
(the original is a local read, over before the first poll). The manual
says so where it describes each. film_reach and duplicates passed;
inference was pinned to the CPU.
FR-EXP-10 is the album: a named export destination beneath the
collections, whose folder holds only the exported files while the
catalog links each back to its original; how albums sync, why a device
folder does not, and why the tables are made on first use rather than
by a migration. FR-EXP-6 now says the destination is an album, never
inside the library, and that folders are chosen by pointing — the
portal or Windows dialogue, SAF's tree picker, the server browser —
each able to make a folder.
The manual's launch and export sections say the same in the words on
screen. Its pictures still show the 0.16.0 launch screen and export
settings; they are re-recorded with the rig, not edited by hand.
The presets sheet now lists the shipped collection beside the
photographer's own, a copy under a shipped name overrides it, and
shipped and imported presets are looks that leave a photograph's own
corrections alone. The manual says so where it introduces the sheet,
and FR-DEV-6 states the rule. The sheet's screenshot (media/presets.png)
predates the sections and needs re-recording.
The manual described the review (7c9a4ee) without a picture, because the
demo library holds no duplicates. The new duplicates scene makes two:
it copies two New York frames into a bck folder beside their own,
restarts the app so the scan finds them, waits for the sidebar row the
sweep's dating brings (54aee50), opens the review from it, presses
Check and takes the page. It deletes the copies and restarts on the
library as it was; record.sh's snapshot restore would remove them too.
It is registered last, so no other scene sees the copies.
The picture shows both groups proved the same file, the camera-named
copy outside bck marked Stays, and "Move 2 copies to trash" ready.
Every scene was recorded again on a release build of this commit with
the automation feature. Master changed what nearly every picture shows
after they were taken: scrollbars on the develop column, the grid, the
sidebar and Settings; a "?" beside Settings in develop's top bar, with
its controls regrouped; the Film row opening its list as a popup.
The film scene pressed the list's rows through the develop column, which
no longer holds them: the list is a popup, and the automation hook
reports its contents relative to it. The scene now opens it with
film_list_open, turns the wheel down it and back so the popup and its
scrollbar are seen scrolling, and clicks Velvia at its popup position
plus the popup's origin. The caption says so. film_reach passed in the
same run: the last stock was reached by the wheel, a drag, the scrollbar
and the keys.
Looked at as contact sheets of each GIF's middle and last frames and
each PNG. launch, launch-folder, library-nesting.png and
library-collection-menu came out byte-identical after optipng and are
unchanged. develop-zoom's deepest frames are smooth on Xvfb as before;
its caption does not claim blocks. Settings shows version 0.15.0,
the build's own, until the release commit bumps it.
The manual described what the pictures show and missed what this round
changed around them:
- Rating and flagging gave stars only. The keys (0-5, P, X, U), Flag on
the selection bar, judging in develop without moving on, and the flag
and stars on the roll's cells had no sentence.
- Nothing said the desktop draws scrollbars on the grid, the sidebar,
the develop column and Settings, or how the grid's bar is used.
- Nothing said how to open Help: the header's Help or F1, and in
develop the "?" beside Settings (d9f2596, 380cfda), with its See it
links and its Manual button.
- Stepping along the roll now goes on past what the roll has loaded
(a030bfd); Settings gained the duplicate originals line and the
Manual row.
index.html is regenerated from the README.
The open stock list showed ten rows, None to Kodak Kodachrome 64, and
the other eighteen - all seven black-and-white stocks among them - could
not be reached. The data was whole; the list could not be scrolled.
Reproduced on the manual rig (Xvfb, xdotool, the automation hook):
- a drag on the list scrolled the develop column, never the list;
- a wheel run over the list scrolled the column past it, whenever the
column had scrolled under that pointer in the last 800 ms - which is
how the list is reached, by wheeling the column down to it. After a
pause and a pointer move the wheel did reach the list;
- no key did anything.
The cause is Slint's routing, not the list. Since 2d878c2 the list was a
Flickable inside the develop column's Flickable, and Slint offers every
pointer event to the outermost Flickable first
(input_event_filter_before_children, i-slint-core 1.17.1 flickable.rs).
The column holds a press back (DelayForwarding) and intercepts the first
move past 8 px on the axis it can scroll, so the list never saw a drag.
For the wheel it intercepts while its own last wheel event is under
800 ms old and within 2 px, and always for a touchpad gesture that opens
with TouchPhase::Started - so on a touchpad the list could get no wheel
at all.
The list is now a PopupWindow under the Film row. A popup is its own
item tree: while it is open, events go to it and to nothing beneath it,
so the list scrolls by wheel, drag and flick however the panel is nested
and whatever the column did last. The alternative, standing the column
down while the pointer is over the list (the sliders' hover trick), fixes
the drag but not the wheel - `interactive: false` does not gate wheel
interception - so it would have left the bug for touchpad users.
The reason 2d878c2 bounded the list still holds: it is at most 320 px
and never lengthens the column, and now it covers the sliders instead of
pushing them down. The column cannot be scrolled while it is open, which
suits a one-click question; it closes on choosing, on Escape or Back, or
on a press outside it.
Keys, with the list open: Up and Down move along it from the chosen
stock and scroll it into view, Enter chooses, Escape or Back closes it
unchanged. A popup is its own focus tree, so the keys are taken when it
opens and Slint returns focus to the develop view's scope when it closes.
The Film row gains a button role, so a screen reader and the automation
hook can name it.
FR-CAT-11a records what #67 built: groups of the same file listed on
demand, proved the same before anything moves, merged onto one survivor
and the rest trashed a group at a time. The manual's new section under
The library says how to reach the page, how the copy that stays is
chosen, what the check reads and what merges.
Every scene was recorded again on a build of this branch rebased onto the
keyboard work and TD-1, since nearly every scene depends on files those
changed: the develop top bar now carries a star strip and Pick/Reject, the
roll shows flags and stars, and the grid's selection bar gains Label and
Flag. `--changed` could not be trusted to find them, because the rebase
made each picture's commit newer than the sources it was recorded from.
The develop-zoom caption said the wheel goes on "until the pixels are
blocks". On Xvfb the deepest frames come out smooth even though the app
draws past 1:1 nearest-neighbour on a real display (confirmed by eye on
the desktop), and a GIF shrunk to 960 wide could not show 3-pixel blocks
anyway. The caption now says what the clip shows; the prose above it,
which describes what the app does, stays.
Four scenes, recorded and looked at frame by frame:
- library-labels: 6, 7, 8 and 9 over four New York frames, 7 again to
take one off, then the Green chip narrowing the grid and back.
- compose-perspective: two towers shot from below, stood upright with
Vertical at about +58, then held against Before.
- crop-orphan: a stroke in the top-left corner, a crop that leaves it
outside, the notice with Undo crop and Keep crop, and Undo crop.
- local-intersect: a linear gradient over the lower half, then
Intersect and two strokes that survive only where it is.
develop-zoom already ends on hard-edged pixels (previous commit). The
text added is a sentence or two under the existing headings, so the
other branch's structure and anchors are left alone.
The sheet could now offer "See it", but no gesture said where to look.
Every GESTURE tag whose move the manual describes names that section:
the white-balance picker, zoom and pan, masks, undo and snapshots,
export, colour labels and ratings, selection, collections, the People
page, thumbnail size. Fifty of the fifty-one; the one left, putting a
single control back to its default, has no section and is too small to
earn one.
Three important gestures had nowhere to land, so the manual gains three
short sections, without pictures for now: Bursts (opening a folded
burst, choosing the frame it shows, and the eyes-open filter), Moving
between photographs (the roll, the arrows and A/D in develop) and
Copying settings (Copy, Paste, Paste to N, and choosing what a copy
carries). The page, the gesture book and docs/gestures.md are
regenerated from them.
The packages now carry the manual, but nothing in the application opened
it: the help sheet listed gestures and stopped there.
The help sheet gains a Manual button beside Done, and Settings a Manual
row under About beside the version. Both go through dr_ui::manual, which
finds the installed page through dr_plat::system_data_dirs (the package's
share directory on Linux, the executable's directory on Windows), and a
development build also in the checkout it was compiled from. A copy with
no manual says so on the status line rather than doing nothing.
On the desktop the page goes to the system browser. A section is a URL
fragment, and xdg-open's generic mode and Windows' FileProtocolHandler
both turn a file: URL into a path and drop the fragment, so a section is
opened through a one-line redirect page written to the data directory:
the opener gets a plain path, which every opener keeps, and the browser
follows the redirect to index.html#section itself. The launcher behind
the sign-in's open_in_browser is split out so both share it; the https
check stays with the sign-in.
Android has no path to give a browser: an asset is not a file, a copy in
private storage is unreadable to other apps, a file: URI across apps is
refused, and a content: URI leaves the browser resolving every picture
against the provider. So ManualActivity, a WebView reading
file:///android_asset/manual/index.html straight out of the APK, shows
it, started by class name with the section as an extra. JavaScript is
off, links off the page go to the browser, and the theme is day-night so
the page's own light and dark follow the system. A test checks that the
manifest, the Java class and dr_ui agree on the name and the extra.
The manual's library section described rating and flagging only, and
the outstanding register still said colour labels were "set and shown
nowhere" and that three NFR-A11Y-3 clauses had no test. Both are now
untrue: the manual gives the keys, the Label button and the chips, and
the register names the test file and what it can and cannot vouch for.
docs/ had 26 developer documents flat beside the manual, and the two
audiences are very differently sized: most readers want the manual and
the gesture reference, a few want the register, the designs and the
measurements. The manual and gestures.md stay at the top; everything for
someone changing the code moves to docs/dev/, and the two documents that
name their own successors — the v0.1 milestone and the UI-refinement plan
— go to docs/dev/archive/ rather than being deleted, since both are still
cited. docs/README.md is the index, users first.
Every reference follows: code comments, Cargo manifests, the workflows,
the pre-commit hook, the bench and traceability tools (which locate the
repo root by docs/dev/requirements.md now), packaging, the Docker READMEs,
CLAUDE.md, CONTRIBUTING.md and the README. The matrix links one level
deeper and is regenerated. Links out of the moved documents into the tree
gain a level; a link checker over every Markdown file finds none broken.
A scene that makes a parent, nests two collections in it by drag and by
the menu, files frames into a child and opens the parent to see it count
both; stills of the tree and of the menu. The collections recording is
re-made now that the bitmap under the cursor is the photograph.
drive.py grows a multi-leg drag: a diagonal with much vertical in it is
taken by the grid's Flickable as a scroll before the DragArea can claim
it, so a drag to the sidebar goes sideways first.
The recording sampled a red brick wall and moved the sliders by three
units, which at GIF size is a click that does nothing. The scene now
drags the frame cold first and picks a white air conditioner, so the
correction is visible and the picker's being absolute - set from the
photograph, not from where the sliders were - is what the picture
shows. The text says so, and says a blown highlight is refused.
docs/manual/README.md is a tour for a photographer opening DarkRoom for
the first time — one picture per thing, moving where movement is the
point. tools/manual/ is how the pictures are made: drive.py puppeteers the
desktop build on a private Xvfb (launch, click, drag, type, screenshot,
record), scenes.py is each picture as a script, and record.sh runs them
all over a folder and writes the results into docs/manual/media/.
The media is in LFS, with the CI pulls excluding it as they exclude the
fixtures; a screenshot changes wholesale when the interface does.
Nothing in the pictures shows a person, by design: the demo library is
seventy urban and alpine frames, chosen from the catalog's rows that face
detection found nobody in.
The traceability matrix is regenerated here after the rebase that
brought this branch up to master.
dtourolle