18f20170b3432f2cbc3c43084d868f160b8bb354
30
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  dtourolleandClaude Opus 5
|
dea826811e |
Render a blown highlight white instead of magenta
Every clipped sky came out bright pink. Measured, not guessed: developing _MG_8596.CR2 and looking at the export, the subject renders correctly and only the saturated region is wrong. A fully clipped pixel reaches the shader as (1, 1, 1) — three photosites that stopped counting, carrying no colour at all. The as-shot multipliers are not neutral, so balancing sends it to (1.93, 1.00, 1.68) on this body, and the camera matrix turns that into R 2.88, G 0.51, B 2.03. Red and blue clip at one; green, whose matrix row is far less positive-heavy, does not. Red and blue high with green low is magenta. Nothing upstream was at fault, which is why the two previous attempts missed it: the white balance is correct, the matrix is correct, and the sensor normalisation is correct. The input simply was not a colour, and correct arithmetic on a non-colour produces a confident wrong answer. So saturation is detected before the balance is applied — the last 1.5% of range, smoothstepped rather than switched, because a hard threshold draws a visible rim around every highlight and a backlit edge on skin is where that shows. Above it the pixel is pulled to the neutral of its own brightness, so it keeps its luminance and loses only the cast. Verified end to end on the file itself: the sky is white, the skin, the black dresses and the stone are unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
d2024da368 |
Scroll the develop column as one, histogram and all
Only the sliders scrolled. The capture metadata, the histogram, the geometry controls and copy-and-paste all sat above them in a fixed layout, so on a 280px column in portrait they took the height the sliders needed — and the histogram, which is the instrument the sliders are judged against, could neither be scrolled to nor scrolled past. The Flickable moves out of `AdjustPanel` and around the whole column. Nesting one inside the other was not an option: a slider drag already has to be won against one scroller, and a second would give it a third thing to be lost to. `slider-dragging` becomes an `out` property for the same reason. The arbitration is unchanged and still necessary — a track stands the scroller down as soon as a finger touches it, or every attempt to drag a slider would scroll the column instead — but the scroller obeying it now lives a level up. The scroll gutter stays where it is, as padding inside the content: it is what guarantees somewhere to put a thumb that means "scroll" and nothing else, and it matters more now that it serves the entire column. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolle
|
4e62b89d17 |
Merge branch 'android-collections'
Build and test / Desktop (Linux) (push) Failing after 18m53s
Build and test / Layer separation (push) Successful in 41s
Traceability / Requirement traces (push) Failing after 1m4s
🐳 Android image / Build and push (push) Successful in 6s
Build and test / android-image (push) Successful in 5s
Build and test / Android (aarch64) (push) Failing after 9m40s
Touch multi-selection in the grid, filing a selection into a collection without a drag, and taking a collection offline from a held row. |
||
|
dtourolleandClaude Opus 5
|
d913e50948 |
Select photographs with a finger, and take a collection with you
Two things a tablet could not do. Both existed for a pointer and had no touch form at all, which on Android meant the collection sidebar was somewhere to look at rather than somewhere to file into. **Selecting more than one.** Ctrl-click and shift-click are the only ways into a multi-selection, and touch has neither. Holding a cell now enters selection mode, where a tap toggles — reported to Rust as a ctrl-press, so it goes through the same `apply_press` as everything else rather than growing a second copy of the selection rules. A double tap takes the run between where selecting began and there: the touch form of shift-click, and the reason the anchor from *before* the double tap has to be remembered, since both of its taps move the anchor onto the cell being tapped. A "Select" button does the same thing where a gesture would go undiscovered (FR-UI-4). **Filing without a drag.** A one-finger drag beginning in the grid belongs to the Flickable that scrolls it — that is the arbitration working, not a bug to route around — so the selection can now be filed from a sheet listing the sidebar's own rows. Copy by default, as the drag has always been; moving out of the collection being shown is a switch, because it is the one that takes something away. **Taking a collection offline.** The machinery was there and reachable only by scoping the grid to a collection and finding a button behind a disclosure. Holding a collection's name now asks the question directly, and the tray on a row and the header button ask the same one — three affordances doing two different things is how a user comes to avoid all three. The question is asked rather than a toggle flipped because both answers are expensive: one downloads gigabytes, the other deletes them, and the counts and sizes go in the buttons where they are read before the tap. `Cache::release` is new and is the destructive half `unpin` deliberately is not. "Remove the local copies" is asked by someone whose device is full, and withdrawing a promise while leaving the bytes for a future eviction to notice is not an answer to it. It unpins before forgetting, or the next pin fetch would dutifully download everything it just deleted. The sidebar's trays read `tier_actual`, never `tier_desired`: the question is whether these will open on the aeroplane, and a pin whose download has not run yet answers no. TRACES: FR-CAT-7 | FR-NC-6a | FR-NC-6b | FR-NC-6c | FR-UI-2 | FR-UI-3 | FR-UI-4 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
44f0a4971b |
Show the folder picker on the platform that needs it most, and upload at once
Two faults, both of my own making, reported from the tablet as "I cannot select a location" and "it does not upload". **The picker button was gated on `target-selected == 1`.** That index was Remote's position while both targets were offered. Making the target list platform-aware narrowed Android's to Remote alone, so Remote became index 0 and the button disappeared — on the one platform where the picker is the *only* way to set a destination, since a device folder is not reachable there at all. It is gated on a boolean derived from the target now. An index into a list whose length varies is not a fact about the target, and writing it as one is what made a correct change break the thing it was meant to fix. **A queued export waited for a sync pass.** Staging first is deliberate — an export is finished on disk the moment it is written, and offline is then just a longer queue — but nothing drained the outbox until the next sync, so "Queued for Exports" sat unchanged and read, fairly, as an upload that never happened. A finished batch that wrote anything now drains immediately. The sync-pass drain stays: the first makes an upload feel immediate, the second is what eventually delivers the exports made in a tunnel. Committed without the parallel session's in-flight collection work, which is mid-save and does not compile; verified by stashing it and building this tree alone. 281 dr-ui tests pass, clippy clean. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
a8b28136a6 |
Merge the batch export, and settle the seven-branch merge
Resolves the last of the parallel work. Two conflicts worth recording, because both were semantic rather than textual: `render_for_export` gained a colour space on master while the batch branch was rewriting the single-image export path around it. Kept both: the batch request supersedes the synchronous path, and the space still has to be chosen at render time because the conversion happens in the shader before the clip to 0..1. `render_open_frame` takes it as an argument rather than reaching for a controller it does not hold. The map-wait moved into `readback::await_mapping` on one branch while another was editing the constant it used, so `READBACK_POLL_LIMIT` survived the merge with no callers. Removed rather than left for clippy to find later. 1164 tests pass, clippy clean, fmt clean. Traceability 53.0% -> 54.3%. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolle
|
9fc8721fa8 |
Merge branch 'histogram'
# Conflicts: # ui/dr-ui/src/lib.rs |
||
|
dtourolleandClaude Opus 5
|
7d3c8c521f |
Export a whole selection, on a thread that is not the interface's
The export button rendered, resampled and encoded a 24 MP frame on the UI
thread and the window was dead for all of it. That was written down as a known
compromise, on the grounds that a batch is what makes the wait intolerable
rather than merely noticeable. This is the batch, so the compromise comes due.
The grid's selection now exports (FR-EXP-7). A worker thread takes a clone of
the `GpuContext` — an `Arc` pair over a device and a queue — and opens each
photograph for itself: fetch, sidecar, decode, demosaic, render at full size,
resample, sharpen, encode, write. Nothing of that touches the interface, which
keeps drawing throughout, and the progress goes where every other background
job's does: one row in the activity register, with a count and a bar.
Why the worker does not borrow the session it could have had. A
`DevelopSession` owns the `AdjustPass` the canvas renders from, so handing it
to a worker would stop the develop view drawing for the length of the batch —
the same freeze, moved. Opening a session per image instead costs a
`Demosaicer` and an `AdjustPass` each time round, and the pipeline cache is
per-pass so the composed shader is recompiled per image rather than once for
the run. Against a full-resolution decode, render and encode that is a few
percent, and it keeps this file out of the pipeline `develop` owns. A reusable
export pass is the obvious next economy if a profile ever says so.
The open image is the exception, and it is why the develop button is not simply
a one-image batch. Its edit lives in the interface's session and may not have
reached a sidecar yet, so a worker that re-opened the file would export the
saved version rather than the one on screen. That frame is therefore rendered
by the caller and handed over as `Source::Rendered`; everything after the
render — the Lanczos reduction, the encode, the write, which is the larger half
of the wait and all of its variance — still leaves the UI thread. So the
develop export is no longer synchronous, but it is not fully off-thread either,
and the doc comment says so rather than claiming otherwise.
Cancellation (NFR-ARCH-3) is an `AtomicBool` read between stages, and the
export button becomes the cancel button while a run is live — a batch that
could only be stopped by not touching the selection would be a trap. Waits on
another worker use `recv_timeout` rather than `recv`, so a cancelled batch
sitting on a forty-megabyte download gives up within 100 ms instead of when the
transfer finishes. The honest bound is worse than that: a frame already in
render has no interior stopping point, so the worst case is one image. Closing
that needs the render itself to become interruptible, which is NFR-ARCH-2's
scheduler and not a finer poll here.
Failures are per image and typed (NFR-ARCH-4). One unreadable body, one folder
that cannot be written, one server that went away — each is a message on the
channel, a line in the log, and a count in the summary, and the batch carries
on. A run with any failure keeps its row until it is cleared, because that is
the row somebody came to the list to find; a cancelled run does not, because
they asked for it.
Two collisions that look alike and are not. `CollisionPolicy` is the user's
answer to "a file of this name was already there", and Overwrite is a fine
answer to that. It is not an answer to "the frame I exported four seconds ago
was also called this" — two folders in a library each holding an IMG_0001 is
ordinary — so a name the run has already issued is always stepped past whatever
the policy says about the folder. Both halves are held by tests.
Supporting changes, each smaller than it sounds. `open_session` comes out of
`load_bytes` so the worker shares the JPEG-versus-RAW routing rather than
carrying a copy that would drift; the half that builds a `slint::Image` stays
behind, where it belongs. `LibraryController::selected_image_paths` answers
from the catalog rather than from the loaded window, because selection is by id
and survives a scrub — a selection made before scrolling routinely names
photographs no row holds. `cache_context_for` takes an id for the same reason,
so a batch reads the originals cache instead of re-downloading three hundred
files. `format_date` is shared so `{date}` and the timeline agree about what
day a photograph was taken.
Left undone, deliberately: the batch is sequential, where FR-EXP-7 asks for all
available cores. Four full-resolution frames in flight is tens of megabytes
each and a straightforward way to exhaust a tablet, and the GPU is shared with
the interface in any case. Also undone: exporting with a chosen preset rather
than the current export settings — that is FR-EXP-5's machinery, which does not
exist yet.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
dtourolleandClaude Opus 5
|
0233df4bf2 |
See what the highlights are doing: a live histogram (FR-DSP-7)
Exposure, blacks and whites were set by eye. Nothing said a highlight had blown — the canvas shows white where a channel is at 250 and white where it is at 255, and the difference is the whole question. **Counted on the GPU, not on the readback.** There is a full frame sitting in CPU memory on every canvas update right now — `AdjustPass::read_output`, the bridge spike S1 removes — and walking it would have been thirty lines and no shader. FR-DSP-7 states the mechanism and not just the feature: "these derive from a GPU-side reduction into a small buffer. Per-frame CPU readback of image data is prohibited." A histogram founded on the bridge would be correct today and deleted by S1, and would meanwhile be the reason the bridge could not go. What crosses the bus here is 4104 bytes whatever the image size. The reduction tallies into workgroup memory first and merges once per workgroup. A photograph is not noise: a clear sky puts tens of thousands of adjacent pixels in one bin, and contending for that single global atomic serialises the dispatch. **On the settled frame only.** `render_now` already knows whether a gesture is still moving — `draft` is the flag `redraw` derives from `was_coalesced` — so the dispatch and its transfer happen once when the slider stops rather than on each of the forty frames a drag emits. Nothing is lost: a histogram flickering past under a finger is not a reading anyone takes. FR-DSP-7 requires exactly this, that it not extend the FR-DSP-3 frame budget. Luma is weighted in 8.8 fixed point — 54, 183, 19, summing to 256 exactly — rather than in floats. Not thrift: it makes the shader's arithmetic reproducible bit for bit, which is what lets the test below be an `assert_eq` against a CPU count rather than a tolerance. ARCH §6.13's line about integer state, applied where it happens to also be free. **What the numbers were checked against.** A flat frame must put all 4096 pixels in one bin and one only. A 256-wide ramp must occupy every level with exactly the same count, which is what catches an off-by-one in the quantisation — a `floor` where a rounding was needed shifts the whole photograph one bin left and looks like nothing at all. And a 101x37 frame of seeded pseudo-random pixels — deliberately not a multiple of the 16x16 workgroup, so the edge tiles run off the image — is compared slot for slot against a second, obvious CPU implementation. Exact equality, no tolerance. The CPU version is a deliberate reimplementation rather than shared code: the bugs worth catching here are ones shared code would commit identically on both sides. Above that, the presentation arithmetic is unit-tested headless, because it is where a wrong answer is invisible. A histogram of the wrong shape looks exactly as plausible as one of the right shape. So: 64 columns because it divides 256 and an uneven fold draws an even ramp as a comb; the peak excludes the end columns, or a night scene scaled against its own black spike is a flat line with no information in it; heights are clamped into the plot; and "0%" is kept distinct from "<0.1%" and from "—", since an indicator reading "clipped" over a figure reading "none" is a panel contradicting itself. Clipping counts a *pixel* with any channel at an extreme, not a channel. Any, because a blown red has no gradation left in it however much green and blue still hold — and it is the saturated highlight, the sunset and the red jersey, that clips first and recovers worst. Per pixel, because counting channels can report 200% of a frame clipped, and a percentage above 100 is a readout nobody trusts again. Two affordances for it, which NFR-A11Y-3 asks for: a bar standing at the end of the plot the tones are piling against, and a figure saying how much. Either alone reads. The panel sits directly under the capture metadata and above every control, because it is what the controls are judged against. It is hand-built rather than generated, and ARCH §4.3a is untroubled: a histogram is not an operation — no parameters, changes nothing, answers a question rather than asking one — and nothing in it reads a parameter out of a descriptor. Three plot colours and a neutral luma trace join the palette. That is the swatch's exception rather than a second one: a per-channel histogram has to say which channel, and no achromatic treatment distinguishes red from blue, so the hue is data exactly as the image beside it is. Held well back from full strength for the reason the theme preamble gives. The bounded, non-parking map wait moves out of `AdjustPass` into `readback::await_mapping`, shared with the histogram's transfer. Thirty lines of load-bearing reasoning about frozen interfaces and lost devices, and two copies of it would have drifted. The histogram describes the frame on the canvas, so it is in the output colour space FR-DSP-7 asks for, and when zoomed it describes the visible region — a photographer inspecting a highlight at 4x is asking about that highlight. A device that cannot build the reduction loses the histogram and keeps the photograph. Still to do for FR-DSP-7: the pixel colour readout under the cursor. 324 tests pass, clippy and fmt clean. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
7f524d2fd0 |
Give a mis-drag a way back
Develop edits now save themselves to a sidecar the moment you leave the image, so until this there was no way to undo one — the mistake was persisted and the only recourse was to remember the old number. The history is a stack of snapshots, because the edit graph is already plain data: `Preset::capture` reduces it to what differs from default and `Preset::apply` puts it back, so undo is those two calls and nothing else. A command object per action, with an inverse beside it, would have been a second thing every operation had to register — and operations are declared in YAML precisely so that a new one needs no code written for it. A snapshot cannot fall behind them. The interesting part is coalescing. A slider drag emits an event per frame and must be one step, not forty. Nothing in the interface reports a gesture boundary — the same wall the render coalescing hit, and it is answered the same way rather than by threading a "finger is down" out of every slider, curve point and crop handle. What stands in for the boundary is the control plus recency: changes to the same control within 700 ms amend one step. Which control is "the same" is asked of the graph, not listed: an operation whose declared presentation claims a parameter is one where a single gesture moves several — a curve point carries an x and a y — so those coalesce as one widget. Nothing in the history names the tone curve. The compromise, and it is a real one: a control let go of and picked up again within the window is one step rather than two. Buying the other answer costs a gesture-boundary signal on every control, which is more surface than the difference is worth. The stack is bounded at 64 states for NFR-RES-1 — a develop session stays open for hours. Sixty-four rather than a byte cap: what is being bounded is steps a photographer would want back, and a byte cap would give the elaborate edit the shallowest history, which is exactly backwards. The session owns its history and every mutator records into it, so the callbacks in `lib.rs` cannot change the edit and forget to — with a dozen generic callbacks that would have been one press of undo away from wrong every time a control was added. Opening a photograph makes its stored edit the floor rather than a step: it is not work done in this sitting, and an undo reaching behind it would discard a previous session's edit and then save that on the way out. Not yet done, from FR-DEV-5: history is per-session and in memory, and there are no named snapshots. What mattered was that a saved mis-drag had no way back at all. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
cb1d2be240 |
Choose the export folder by walking the server, not by typing it
The destination for a Nextcloud export was a text field. Nobody recalls the exact spelling of a path three levels down, and getting it wrong does not fail — `create_dir` makes whatever was typed, so a misremembered folder becomes a new one at the root and the exports are somewhere nobody looks. So it is picked the way the library root is picked, using the same `FolderBrowser` model the launch screen drives: up, into, and "use this folder", confirming the folder currently *shown* rather than one selected in the list. Same rule in both places, so the phrase means one thing. The model is shared; the worker is not. `settings_ui::spawn_folder_list` is a near-twin of the launch screen's, because that one reaches into the `LaunchController` for its session and reports onto the launch screen's error line, while this one is handed credentials and writes to the settings page. Factoring them together needs a function taking both controllers or a trait implemented twice to abstract two call sites — more machinery than the twenty lines it saves. What matters is shared already: navigation behaves identically because both drive the same model. The callbacks are wired in `lib.rs` rather than in `settings_ui::wire`, because listing a remote folder needs credentials and the settings page holds no session on purpose — it is reachable before a library is opened and must not depend on one existing. With no account the picker says to sign in first, rather than showing an empty list that reads as a server with no folders. Details that are decisions rather than accidents: the picker opens at the library root rather than at whatever half-typed path is in the field, which would list nothing and look broken. The listing area is a fixed 180px, since a folder with sixty children would otherwise push the rest of the settings page off the bottom. "Up" is disabled at the root rather than hidden, so the row does not jump as the user navigates. A failed listing leaves the picker open on the folder it was showing — where the user had got to is not something to discard over a dropped request. And the chosen folder saves immediately like every other setting on a page that has no Save button. The poll timer lives on the controller for the reason `LaunchController` keeps its own there: a `slint::Timer` stops when dropped, so one local to the function that starts it would be collected before the listing arrived. Carries in-flight work from a parallel session — a segmentation pass in dr-gpu, a sidecar cache, and the develop panel's continuing changes. 1020 tests pass, fmt clean. One clippy warning remains and is not mine: `sidecar_cache::dir` is unused while that work is in progress. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
e00c99b864 |
Let a photograph leave: an export button, and a cache to leave from
dr-export could turn a frame into bytes and nothing could ask it to. This is the button, and the place the bytes go. **Everything is staged first.** An export bound for the server is written to a local outbox and uploaded afterwards; offline is not a special case, it is the same path with a drain that finds the server absent. Doing it the other way — upload directly, stage only on failure — makes the failure path the one that is rarely exercised and always broken, and a network drop mid-batch leaves some exports existing and some not with nothing recording which. Staged first, an export is finished the moment it is written and the upload is a promise kept later. The outbox sits beside the catalog rather than under the cache. dr_catalog's cache already draws that line: passive entries are a convenience and go under LRU, pinned ones are a promise and never do. An export awaiting upload is a promise — the user was told it succeeded — and sweeping it for disk would destroy the only copy. Bytes are written before the destination record, so a kill between the two leaves an orphan the drain ignores rather than a record pointing at nothing. The status line says "Queued for Exports/2026", never "Exported to Nextcloud", until it has actually landed. There is a test asserting that wording, because the tempting shorter sentence is a claim the app cannot keep. The drain runs on the sync pass, before the shards: a thumbnail shard can be rebuilt from the originals and the catalog is an index, but a queued export exists nowhere else. `DevelopSession::render_for_export` renders the framed size rather than reusing the frame on screen, which is deliberately viewport-sized (FR-DSP-1) — encoding that would hand the user a soft, screen-sized file with nothing to say anything had been lost (FR-EXP-9). One compromise, recorded rather than hidden: the export runs synchronously on the UI thread, so the window is unresponsive for the few hundred milliseconds a full-resolution render and encode takes. Moving a DevelopSession and its GPU pass to a worker is a larger change than one button earns, and it is batch export that makes the wait intolerable rather than merely noticeable. Still missing: the Nextcloud folder *picker*. The destination is typed into Settings for now. `FolderBrowser` in launch.rs is already the reusable model for it — it browses a remote tree and nothing about it is specific to choosing a library root — but wiring it into the settings page needs a listing worker and browser UI there, which is its own piece of work. Carries in-flight work from a parallel session — presets, the develop copy and paste, and the node schema's `presentation` and `enum` support. One misplaced callback in settings_ui.rs is moved from `render` to `wire`: registered in `render` it borrowed a `&SettingsController` into a 'static closure and would not compile, and that file's own docs say render pushes properties while wire connects callbacks. 992 tests pass, clippy and fmt clean. Traceability 48.3% -> 51.0%. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
e7130ff891 |
Give the library header somewhere to put six buttons
A tablet in portrait is 1920 physical pixels at density 400 — 768 logical, which is below the 820 breakpoint, so the library was already taking the compact layout. The compact header simply was not compact: one flat HorizontalLayout holding a menu button, a title, three status readouts and six buttons. Slint's HorizontalLayout has no wrap and no overflow. Given less width than its children want it shrinks each to its minimum and lets the rest run past the edge, so "Change library" arrived as "Change li…", the readouts elided to nothing useful, and the row overflowed anyway. The six actions move into a `HeaderActions` component drawn in one of two places: inline in the header when expanded, and in a disclosure row under it behind a "More" button when compact. One component rather than two copies, because the alternative is six buttons with their visibility rules and callbacks written twice, and the copy that rots is the one behind a disclosure nobody opens while testing. The row closes itself when the window widens, so rotating to landscape does not leave a stray toolbar behind. "More" is a word rather than an ellipsis glyph: "⋯" sitting in a header of elided labels reads as one more truncation, which is the failure this change exists to remove. `LibraryGrid` takes `expanded` to decide, from the window width rather than the device (FR-UI-1) — so a narrow desktop window gets the same treatment. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
151dcc3c02 |
Make a file out of a photograph
Export existed as a settings page and nothing else: format, quality, colour
space, five sizing modes, a filename template and a metadata switch, all
configurable in detail, and no way to produce a single file. dr-export is the
other half.
**It returns bytes and a name, and writes nothing.** An export has three
destinations with nothing in common — a path on Linux, a SAF document on
Android where there is no path at all (ARCH §6.9), and a PUT to a Nextcloud
folder — so a crate that opened the file itself would serve one of them and be
rewritten for the other two. The caller places the bytes.
Resize, then sharpen, then encode, in that order and for a reason: output
sharpening compensates for the softening the resample introduced, so its
strength scales with how much scaling actually happened, and sharpening before
shrinking would throw the result away. Lanczos-3, separable, with weights
computed once per output row — FR-EXP-4 asks for Lanczos or better because a
box filter turns a distant fence into moiré.
Collision handling takes the "is this name taken" test as a closure rather
than looking at a directory, because there is no directory it could look at
that works everywhere. That shape is not politeness toward Linux: Android's
createDocument renames on collision by itself and cannot overwrite at all, so
all three CollisionPolicy settings need the answer *before* anything is
created. Overwrite, Skip and Increment are each tested, and Increment gives up
after ten thousand rather than spinning against a destination that reports
everything as taken.
Three things are honest rather than done:
- **Colour space.** sRGB only. The shader encodes and clips to sRGB before
this crate sees a pixel, so tagging a file Display P3 would claim a gamut
it does not contain. Refused with a typed error instead of mislabelled;
honouring it is a pipeline change (FR-EXP-2).
- **AVIF and JPEG XL.** No encoder. libaom and libjxl are C, ravif is slow
enough to change what a batch feels like, and the settings page offers
both because FR-EXP-1 lists them — so asking for one says so rather than
writing a JPEG under a .avif name.
- **16-bit TIFF** is a real 16-bit file carrying eight bits of information,
because AdjustPass renders to Rgba8Unorm. Widened by *257, not <<8, so
white lands on 65535 rather than a quarter-percent grey. Making it mean
what it says needs the composer told what format to write.
Metadata is not written at all, which satisfies the half of FR-EXP-8 that
matters most: strip_location defaults to on, and a file with no EXIF block has
no GPS tag. Retaining camera and copyright when asked is not implemented and
cannot be faked by omission.
Also here:
- `AdjustPass::export_pixels`, ungated where `read_output` is behind a
feature. The two are the same transfer and opposites in intent: reading
pixels back to *display* them is what ARCH §6.1 forbids and AC-8 asserts
against, while reading them back to encode a JPEG is the only way a file
has ever been made. Separate methods so the instrumentation can count one
without counting the other.
- `ExportTarget`, so a destination can be a folder on the server. On Android
that is the only destination needing no platform work whatsoever — a PUT
against create_dir, already on the RemoteBackend trait, behaving
identically on both platforms. Switching target clears the destination,
since a path is not a remote folder and carrying one across would offer to
create a folder called `home` at the library root.
Verified end to end rather than by unit test alone: `cargo run -p dr-export
--example export` decodes a frame, runs the develop chain on the GPU at full
resolution, reads it back, and writes all five formats — 27 ms for a
full-size JPEG, 165 ms with a Lanczos reduction to 1200px. ImageMagick agrees
the 16-bit TIFF is 16-bit. dr-export cross-compiles clean for
aarch64-linux-android; all three encoders are pure Rust, which is why they
were chosen. 944 tests pass, clippy and fmt clean.
Not yet wired to a button. The develop view has no export action, so nothing
in the running app can reach any of this yet.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
dtourolleandClaude Opus 5
|
65e6a96a65 |
Say what the application is doing, in one bar and one list
Every background job reported into a window property of its own — library-thumbs-done, library-pin-total, library-syncing — which only the grid ever read. A pin download that outlived the view it was started from drew nothing at all once the user opened an image, and there was no answer anywhere to "what is this busy with", because the answer was spread across eight properties nothing collected. They report to one register now (ui/dr-ui/src/activity.rs). It publishes an aggregate, which draws a three-pixel bar across the top of the shell in every view, and a row per job, which the settings page lists: scans, thumbnail batches, pin and open downloads, sidecar uploads, the sync and the trash. Failures stay on the list until they are cleared; routine successes do not, or a scroll would bury them. The handle removes a still-running job when it drops, so a worker that dies mid-transfer takes its row with it rather than leaving the bar sweeping for the rest of the session. Also carries in-flight work from a parallel session — the drawn icon set and the dr-pipeline ops split. dr-pipeline's build script does not compile at this commit; ui/dr-ui does, with clippy clean and its tests passing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
70435b712e |
Walk the grid with the arrow keys, and open with Return
Build and test / Desktop (Linux) (push) Successful in 17m36s
Build and test / Layer separation (push) Successful in 34s
Traceability / Requirement traces (push) Failing after 25s
🐳 Android image / Build and push (push) Successful in 3s
Build and test / android-image (push) Successful in 3s
Build and test / Android (aarch64) (push) Failing after 9m17s
A cull is thousands of decisions. The grid already bound 0-5, P, X and U so the judgement itself needs no mouse, and then made the photographer reach for one to move to the next frame — which is most of the gesture, most of the time. Arrows now move a cursor, shift+arrow extends the selection, Home/End and PageUp/PageDown cover ground, and Return opens what the cursor is on. The cursor is a library ordinal, not a row of the loaded window. The window is a few screenfuls around wherever the user is looking, so a cursor held as a row would stop at its edge or keep counting into cells belonging to other photographs; walking out of the window reloads it around the new position, exactly as scrolling does. This is the argument the selection already made by keying on ids rather than rows. The anchor had that fault for real: it was a window row, so a shift-click after a scroll extended from whatever image had since drifted into it. It is an ordinal now, and apply_press takes the window's offset to map between the two. A range longer than the loaded window truncates to what is loaded, since selection is by id and an image the catalog has not been asked for has none. The pointer and the keyboard share select_row so the two cannot drift apart. The one deliberate difference: a plain arrow collapses the selection onto the cursor, where a plain click on an already-selected cell leaves it alone — that exception exists so a multi-image drag can start from one of its members, and there is no drag behind a keystroke. The grid scrolls to the cursor only when the cursor leaves the viewport, and then by as little as will do it. Reusing the scrub's seek() would put the cursor's row at the top on every press, which makes a row unreadable as you walk along it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
67c0237ddd |
Make one slider, and take the lids off the develop column
Build and test / Desktop (Linux) (push) Successful in 20m28s
Build and test / Layer separation (push) Successful in 36s
Traceability / Requirement traces (push) Successful in 1m6s
🐳 Android image / Build and push (push) Successful in 13m45s
Build and test / android-image (push) Successful in 13m47s
Build and test / Android (aarch64) (push) Failing after 9m16s
Two complaints from a tablet, with one cause between them. **Some sliders dragged and others only answered a tap.** They were not the same control. `ParamSlider` read its geometry from a `ParamRow` for the generated panel and `PlainSlider` took plain numbers for the straighten angle, each with its own track, handle, hit area and gesture rules written out separately — and a comment arguing the duplication was safe, because "a slider that dragged differently depending on which panel it sat in would be a worse inconsistency than the duplication". That is exactly what happened. The touch arbitration fixed in the previous commit went into `ParamSlider` and `CurveEditor`; `PlainSlider` kept the old code, so two sliders in the same sidebar behaved differently and which one you got depended on where you were dragging. The duplication failed to survive its first change. There is now one `SliderTrack`, owning the track, the hit area, the claim test, the hover arbitration, click-to-jump and double-click reset. The two wrappers differ only in where their numbers and labels come from. **Nothing in the develop column collapses any more.** Every group was a `Section` with a disclosure triangle, including five operations that carry a single parameter — so the lid was most of the row, wrapping one slider whose own label repeated the heading word for word. A control behind a lid is one the user does not know the pipeline has. `GroupHeading` keeps what the section was actually for: the name, the dot that says something inside differs from its default, and the reset. The reset is now permanently visible rather than appearing on hover, because a hover-only control is one no finger can reach. IMAGE goes back to flat as well. The column as a whole still closes, from the status strip — which is the control that was wanted, at the level it makes sense at. This costs no vertical space: `Section` defaulted to expanded and nothing ever set it otherwise, so the panel was already unfolded and the lids were overhead with no saving behind them. Verified with cargo test -p dr-ui (192), clippy at -D warnings, and an arm64-v8a release build installed on a tablet. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
94a2686dcb |
Fit the interface to the system bars, the finger and the back key
Four faults that only show on a device, and one that was hiding on the desktop too. The system bars. Target SDK 36 forces edge-to-edge, so the window spans the display and the develop status strip was drawn underneath the clock and the wifi icons. Slint already computes the inset from Android's OnApplyWindowInsetsListener and exposes it as Window.safe-area-insets; nothing read it. The four views now sit inside a shell placed within the safe area. Every inset is zero on the desktop, so that layout does not move. Sliders under a finger. A Flickable steals any gesture that drifts more than 8 logical pixels along its scrolling axis within half a second of the press, and it steals it by cancelling the child. ParamSlider's axis test correctly declined to claim vertical drags, but nothing told the Flickable to stand down once a drag was claimed — so an adjustment would start moving and then be taken away mid-motion. A mouse holds a horizontal line closely enough to stay under 8px; a finger does not, which is why these worked on the desktop and not on the tablet. The claim now sets `interactive: false` for the rest of the gesture. The tone curve had the same fault and worse: its points are dragged vertically, which is the Flickable's own axis, so every drag was stolen — on the desktop as well. The back gesture. Nothing handled it, so back closed the application from anywhere in it. Android delivers it as Key.Back to the focused item and bubbles it up the ancestors, which is the second reason the shell wraps the views rather than sitting beside them. The order is innermost first: settings, then crop, then zoom, then develop to the grid, then a collection scope. Answering false at the top of the stack leaves Android to close the activity, as it does for every other application there. Escape does the same on a keyboard. back_step is a pure function over a flat NavState so the ordering can be tested without a backend: which of two states is left first is the whole of the feature, and it is the part that is easy to get subtly wrong when spelled out in nested ifs over live properties. Develop's canvas now takes focus on show. Without it the arrow keys did nothing until the canvas was clicked, and Key.Back had no focus item to bubble from. Panels that close. The collections sidebar and the develop column are collapsible from the grid header and the status strip. The layout class now supplies only the default: a panel closed to see more of a photograph stays closed while the window keeps its shape, and the choice is dropped when the class changes, because rotating a tablet asks a different question from the one answered in landscape. IMAGE became a Section, being the only group in the column that could not be put away and the one whose content is read first and needed least. Pinch to zoom on the develop canvas, anchored on the midpoint between the fingers (FR-UI-4). The wheel is the desktop's answer and there is no wheel on a tablet. The develop status strip was 28px against the 44px headers on the library and settings pages either side of it — the one screen where a way out has to be found was the one drawn smallest. All three now agree. Verified with cargo test -p dr-ui (192 passing, 6 new), clippy at -D warnings, and an arm64-v8a release build packaged to an APK. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolle
|
4d78041d1d | Many imorovments | ||
|
dtourolleandClaude Opus 5
|
fa12afed18 |
Keep originals on this device, by pin and by use
Fills in `image_cache`, which the previous commit's "On this device" filter read but nothing wrote. Also carries in-flight work that shared these files: the Android TLS root store, the settings page, and a regenerated traceability report. # Two populations, deliberately separate An original is kept here for one of two reasons, and conflating them produces the exact failure the feature exists to prevent. **Pinned** originals were asked for. Pinning a collection before a trip is a promise, so pinned rows are never evicted and never counted against the budget — a cap that could silently delete a pinned trip would make pinning worthless, because it could not be relied on without checking. **Passively cached** originals are a side effect of working: develop already downloads the whole file, so keeping it costs no bandwidth and saves the entire transfer next time. This population is what the budget bounds, evicted least-recently-used, because it otherwise grows until a day of culling fills a disk. Sharing one budget would let a large pin starve the passive cache, or let browsing evict a pin. They are separate. # What was built `dr_catalog::cache` owns the bookkeeping — held tier, size, last use, pinned — and writes the bytes; deciding to download stays with the caller, which is what keeps a crate with no network out of the network's business. Files are written to a temporary and renamed, so a dropped connection cannot leave a truncated file recorded as a complete original. They are named by image id, not filename: `Photos/IMG_0001.CR2` and `Trips/IMG_0001.CR2` are different photographs, and a flat cache keyed on the name would serve one for the other. `spawn_full_fetch` became read-through. A hit is a disk read; a miss stores what it downloads and enforces the budget. A cache that cannot be opened is a miss, not a failure to open the photograph. Pinning writes intent — `tier_desired` — without downloading, so the button responds immediately, and `spawn_pin_fetch` fills it in sequentially afterwards. Sequential because these are tens of megabytes each: the lanes that make the thumbnail sweep fast buy little against one connection's bandwidth and cost a great deal of memory. A pin interrupted by a lost connection resumes from where it stopped. Schema v5 adds `pinned` and `path`. `pinned` is a column rather than something inferred from `pinned_by_rule`, which is ON DELETE SET NULL and so cannot answer for an image whose rule was deleted. A v4 catalog migrates in place; existing rows default to unpinned, the safe direction. The budget and "keep opened originals" come from the settings page rather than a constant, and are applied at startup rather than only on change — a cache capped at 2 GB last session would otherwise spend this one filling to the default. Turning off keeping leaves what is already cached readable: those bytes are paid for, and refusing them would re-download images sitting right there, including pinned ones. Also removes a doubled `#[test]` introduced in the previous commit. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
cd75e5a4c6 |
Run the library from local data when the server is unreachable
Also carries in-flight work that shared these files: the zoom structure-key fix in the adjust pipeline, nearest-neighbour filtering past 1:1, the timeline scrub marker correction, the 423-Locked retry in the metadata sweep, and the thumbnail size-class migration. # Offline mode (FR-CAT-9) The app previously assumed the server was reachable and treated its absence as a series of unrelated per-operation failures. A launch without a connection produced an empty grid, even with a complete catalog on disk and every thumbnail already in the shards. Reachability is now inferred from traffic the app was already making, rather than probed for. `RemoteError::indicates_offline` draws the line that makes this possible: a dead connection is offline, a 403 or a 500 is not — the server answered, so blanking the library over one forbidden file would be a worse error than the one being reported. `Reachability` turns those outcomes into a state, so a library browsing happily never issues a probe at all. Going offline takes one failure, because the user is already experiencing it. Coming back requires evidence — a completed scan or a fetched thumbnail — with a capped exponential backoff behind the manual retry, so twelve sweep lanes failing together do not schedule twelve immediate probes. What keeps working: the catalog opens even when the scan that normally provides it failed, so the grid fills from the last successful scan. Thumbnails come from the shards. Rating, flagging and collecting are catalog writes that never touched the network. What stops is opening an original that was never stored locally, and it now says so in those words instead of reporting "network error: connection refused" over a photograph. Work that is pure network is refused rather than left to fail slowly: the metadata sweep, derived sync, and sidecar writes. The sweep would otherwise spend a timeout per image across the whole library while the progress bar implied something was happening. Deferring sidecars is a real gap rather than a hidden one — a rating made offline reaches its sidecar only when that image is judged again while connected — and it is recorded as such at the call site. # The "On this device" filter A chip beside the rating filters, narrowing the grid to images whose original is held locally. It composes with the rating terms rather than replacing them, so "five-star frames I can actually edit on this train" is one filter. The predicate is SQL, like the rating terms and for the same reason: the count in the header has to agree with the cells drawn. It reads `image_cache.tier_actual`, which nothing writes yet — the next commit fills it. Until then the chip honestly reports zero. `Tier` gains an explicit on-disk encoding. The variants are ordered by generosity and the derived `Ord` invites reordering them, which would silently reinterpret every cached row; the round-trip test is what holds the two in agreement. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
f6a100863e |
Place the timeline marker where the pointer actually is
The marker was drawn from a bucket index while a click reported a fraction of the track. Those are different quantities: bars each occupy one equal slot whatever span of time they cover, and the index snapped to the containing bucket's start edge, so the marker landed at the top of whichever slot held the instant — close enough to pass on a dense uniform axis, plainly wrong on a sparse one, and never under the click. Send the fraction instead, computed as the exact inverse of the interpolation the scrub handler applies, and position the marker from it. Marker and click are now the same quantity by construction. Scrolling the grid also left the marker behind: only an explicit scrub ever wrote the position, so the axis claimed to say "when you are" and stopped being true the moment the wheel moved. Map the first visible row back to a capture time and move the marker with it. That runs on every scroll event rather than behind the window-reload guard, which fires a few times per screenful and would make the marker advance in jerks. Only the marker moves, not the bars: rebuilding those means a GROUP BY aggregate over the library, far too much for a flick, and they do not change as the grid scrolls anyway. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
d49b4b41de |
Add thumbnail size classes and grid zoom; fix the scrub ordinal
The grid now zooms, which needs thumbnails at two resolutions rather than one, and exposed a scrub that landed in the wrong place. **Two thumbnail size classes.** `ThumbSize::Grid` (256px, ~10 KB) and `Large` (1024px, ~45 KB), with the class part of the store key so both coexist. Storing everything large would take the reference library from ~200 MB to ~860 MB, and shards sync, so that is transfer cost on every device rather than only disk. A store written before the class existed migrates in place: its entries are all grid-sized, which is what the column defaults to, so nothing already fetched is discarded. `forget` now drops every size for an image. Reading a single row left the other class's bytes on the shard's tally for good, sealing it early on space nothing occupied. **Grid zoom.** Ctrl+wheel and pinch resize cells between 90px and 420px in geometric steps, so the gesture feels the same at either end where a fixed pixel step would be imperceptible at 400px and violent at 90px. Crossing 256px switches to the large class, so a zoomed cell is sharp rather than upscaled. Columns and window capacity already derived from cell size, so the grid reflows for free. **The scrub landed about half a library too high.** It counted only dated images while the grid shows all of them — 10,733 dated against 19,841 rows — and ignored `shadowed_by`. Verified against the live catalog: the old formula gave 10,887, the new one 10,732, the true grid position 10,732. The scrub's count and the grid's window must use identical predicates and ordering; a test now fails if they diverge. **Timeline gestures are continuous.** Scrub and pan were quantised to whole buckets, so a slow drag did nothing until it crossed a boundary and then jumped a month. Both work in fractions of the visible span now, and pinch-to-zoom arrives for tablet, where there is no wheel to reach the axis with. The pinch accumulator was wrong on first writing: it took at most one step per update, so an 8x spread — three doublings — yielded one zoom level. `log2().trunc()` now extracts every whole doubling and carries the remainder. The original test asserted the wrong number and defended it in a comment, which is worth remembering: a test can entrench a bug as readily as catch one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolle
|
9a24623e35 |
Fix the workspace build off-device
Two breaks that only appeared on a full `cargo test --workspace`. `slint::android` exists only when compiling for Android, so darkroom-android failed to compile on the host even though it is a workspace member. The entry point is now gated on the target rather than on a feature. The timeline forwarded `scrub` where the Timeline component declares `scrub-to`, which the Slint compiler rejects. Assisted-by: LLM |
||
|
dtourolle
|
8ad5c86ff9 |
Add the library, collections, and trash views; theme from style.yaml
The UI gains the views the catalog work was building toward: a windowed
library grid with ratings and flags, the collection tree with drag-to-add,
and trash with restore. derived_sync pushes thumbnail shards and the catalog
snapshot to the server's derived folder.
Tokens now have one source of truth. build.rs reads style.yaml and generates
theme.slint into OUT_DIR, which answers every existing
`import { Theme } from "theme.slint"` unchanged, because Slint resolves
imports against the importing file's directory first and the include paths
after. Generating into OUT_DIR rather than beside the hand-written Slint is
the point: a generated file sitting in ui/ looks exactly like the files
around it that are meant to be edited, and an edit to it would survive until
the next touch of style.yaml — a bug that hides for weeks. build.rs fails
loudly if a stale ui/theme.slint exists, which would otherwise shadow the
generated one silently and make every palette change vanish with no error.
The palette moves to near-neutral dark with achromatic signalling, so the
accent means "modified" or "active" rather than "heading". Shared components
land in widgets.slint: a token that binds several values into one concept is
a component, not a row in a YAML file.
Adds an optional live-style feature that makes the tokens in-out so they can
be written at startup — a feature rather than the default because it stops
the properties being constant-folded.
serde_norway is the YAML crate: serde_yaml and serde_yml are both deprecated,
and its mappings preserve insertion order, which is what lets the generated
Slint keep the token ordering the author chose.
Assisted-by: LLM
|
||
|
dtourolle
|
2ca1716a29 |
Make "Choose folder" an actual folder picker
It previously fetched the folder list and threw it away into a status line — a button that looked like it worked and did not. Now it opens a browsable picker: click a folder to descend, ".." to go back, "Use this folder" to select, "Cancel" to leave the root unchanged. Descends one level per click because that is what the backend supports: Depth: infinity is frequently disabled server-side and prohibitively expensive where it is not (ARCH §8.4). The chosen root persists immediately on confirm, so it survives a crash before the library is opened. Confirming at the account root is allowed — a user may legitimately keep everything at the top level — and cancelling leaves any previous selection untouched, which a test asserts. Verified against nextcloud.tourolle.paris at both depths: 30 folders at the root, 21 year-folders inside PhotosRaw. 19 launch tests, 38 in dr-ui. |
||
|
dtourolle
|
f630a3ff81 |
Wire the launch screen into the app
The app now opens on the login screen when there is nothing else to show
— no local paths and no configured library — and goes straight to the
images otherwise. Making someone click past a login they already
completed is pure friction.
launch.slint imported by app.slint, replacing the window rather
than overlaying it: there is no library to look at
until an account is configured
launch_ui.rs the Slint wiring, kept out of lib.rs so the launch
flow can change without touching the develop window
Login runs on a worker thread and posts results back through a channel,
since Slint's event loop is single-threaded and a 20-minute browser wait
cannot block it. The system browser is opened via xdg-open, never an
embedded webview (FR-NC-1).
Sign-out deletes the local credential even if server-side revocation
fails: a network error must not leave a usable secret on the machine.
Format tick-boxes persist on each toggle, so a selection survives a
crash before the library is opened.
Two things deliberately incomplete rather than faked:
- "Choose folder" lists the account's folders and reports them, but
there is no picker widget yet, so selection still happens via the
connect example.
- "Open library" logs the request. Opening a remote library needs the
scan-and-cache path, which belongs with the catalog work in flight.
Earlier I broke the other in-flight dr-ui work by calling
slint_build::compile twice, which replaces the generated module. The
correct wiring is an import inside app.slint, which is what this does.
30 dr-ui tests passing; both launch paths verified by running the app.
|
||
|
dtourolleandClaude Opus 5
|
78e3e6b846 |
Add the develop pipeline: demosaic and seven raw adjustments
Decode through display, on the GPU: black/white normalisation, Bayer demosaic, camera colour transform, and the first seven adjustment operations — white balance, exposure, highlights/shadows, blacks/whites, brilliance, vibrance, saturation. Composable shaders. Each operation contributes a WGSL fragment rather than owning a pass, and dr-pipeline fuses the *active* ones into a single compute shader. One texture read and one write per frame regardless of how many adjustments are in play, while the operations stay independent in Rust — adding one is a new file, with no central shader to edit. An operation at neutral settings contributes no code, no uniform and no branch. Uniforms are prefixed per operation so two may both declare `amount`; helpers dedupe by name from a single source of truth. Pipelines cache on a structure hash covering the op-set and its order but not the values, so dragging a slider uploads uniforms and reuses the compiled pipeline. Measured on a 24 MP CR2: 0.60 ms re-render, one pipeline compiled across ten slider positions. The UI is generated, not written. EditGraph::capabilities() reports parameters with their kinds, ranges, defaults and current values; the panel builds one control per entry chosen by ParamKind. No file in ui/ names an operation, and dr-pipeline has no wgpu dependency, so codegen is testable without a device (ARCH §6.5a). Three defects found against real files, each silent: - rawler 0.7.2's `xyz_to_cam` is all zeros — deprecated and no longer populated. The live matrices are in `color_matrix`, keyed by illuminant. Reading the old field yields no colour transform at all. - `cam_to_xyz_normalized()` returns all NaN on any Bayer sensor: it divides each of four rows by its own sum, and the unused fourth (emerald) row sums to zero. Inverting the 3x3 ourselves avoids it. `wb_coeffs[3]` is NaN for the same reason and is normalised at decode. - As-shot white balance reached the uniform block but no shader read it, so the first render of a real CR2 came out violently green. Green photosites collect roughly twice the signal of red and blue. Now applied unconditionally before any operation, with tests on ordering. Demosaic is Malvar-He-Cutler rather than bilinear: gradient-corrected interpolation at one 5x5 neighbourhood per pixel, where bilinear leaves visible zippering on any high-contrast edge at 1:1. Two of the four packed CFA constants were wrong on the first attempt, so all four layouts are asserted to reconstruct the same colour. Crop origins at odd coordinates re-phase the pattern; without that, red and blue swap. X-Trans reports GpuError::UnsupportedCfa rather than approximating with the Bayer path, which would look like a corrupt file. 206 tests, including GPU tests proving every operation and the full seven-operation chain generate compilable WGSL. Known gaps: the display path still reads back to the CPU each frame, which ARCH §6.1 forbids and AC-8 asserts against — it is gated behind the `readback` feature and waits on spike S1 wiring Slint's texture import. Curve shapes are a first draft and want tuning against real photographs. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolle
|
9717e59909 |
Add RAW decode and a working image viewer
dr-decode exposes four entry points rather than one decode, because callers differ sharply in what they need (ARCH §3.2): culling wants a preview, the grid wants metadata, only develop and export touch sensor data. Fusing them forces a full decode where a header read suffices, which is why Lightroom stalls ~2s per image while culling. Smoke-tested against 1,852 real Canon CR2 files (EOS 6D, ~27MB each): metadata 0.2ms from a 256KB header read, no full decode preview ~250ms 5472x3648, downscaled to 2048 for display jpeg 3.0ms Two findings worth recording: rawler 0.7.2's CR2 decoder implements only full_image; thumbnail_image and preview_image are unimplemented trait defaults returning None. So every rung of the preview ladder resolves to a full-resolution decode at ~250ms — 5x over NFR-P13's 50ms budget. CR2 does carry smaller IFDs, so the fix is our own IFD walk or an upstream contribution. The ladder is written now so that fixing it is a decoder change, not a change to every caller. Recorded in milestone-v0.1 risks. Preview.downscale_to bounds memory: a 5472x3648 RGBA preview is 79.8MB, which exhausts a phone's budget after a handful of images. Box-filtered so downscaled thumbnails do not alias. Also fixed a RefCell double-borrow that panicked on first navigation — `*x.borrow_mut() = *x.borrow() + 1` holds both borrows at once. Verified with 10,000 programmatic navigations. 58 tests passing. Traceability 20.3% (29/143). |
||
|
dtourolle
|
82a5e21ec6 |
Initial workspace: GPU context, compute pass, adaptive Slint shell
Establishes the v0.1 foundations on both platforms: - dr-types: SourceRef (never a filesystem path — Android SAF has none), Format, Availability, Validator with ETag quote normalisation - dr-gpu: wgpu device, compute pass writing a storage texture, resize - dr-ui: Slint shell with FR-UI-1 adaptive layout, computed in Rust to avoid a binding loop - docker/android: pinned toolchain, verified producing API 28 ARM binaries Measured the cost of the temporary CPU readback path (dr-gpu bench): compute is 0.06-0.28ms across sizes while readback is 0.63-7.43ms, so readback is 90-96% of frame time and scales with area. Recorded in ARCH §6.1 — this is why spike S1 is the priority. Mitigations pending S1: reuse the staging buffer, apply at most one resize per frame, and cap render resolution at 2048 on the long edge. 10 tests passing; core crates cross-compile for aarch64-linux-android. |