4d0ad0601c783487e4f17e7ded9147878ef15b4f
6
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  dtourolleandClaude Opus 5
|
3bb68cff69 |
Export at an exact resolution, and offer the panels worth naming
Export sizing could bound an image but not fix it. Long edge, short edge and percentage all preserve the aspect ratio by letting one dimension fall where it may, which is right for most work and useless against a display that accepts one resolution and rejects everything else — a television's art mode, a digital frame, a wallpaper slot. FR-EXP-3 has always listed both halves of the answer, and this adds them. **Fit box** scales to fit inside a width and height, so nothing is thrown away and the result is smaller than the box on one axis unless the crop already matches it. **Fill box** scales to cover the box and cuts the overhang off the middle, so the file is exactly the pixels asked for. Fill is the only mode in the file that discards image data, so two things about it are worth stating. The overhang comes off symmetrically: the crop tool is where a photographer decides which part of a frame survives, and this stage having an opinion of its own would fight it. And locking the crop to the same ratio leaves nothing here to cut, which is the workflow the two features are meant to be used in. With upscaling off and a source too small to cover, a fill box keeps its *shape* rather than falling back to the source's: exporting a 3:2 file where 16:9 was asked for is silently wrong in exactly the way the mode exists to prevent, so the box shrinks instead. The existing rule — clamp, never fail — is otherwise unchanged. Four panel sizes are offered as buttons beside the fields. Getting 3840 x 2160 by typing four digits twice is a step at which the mistake is discovered after the upload rather than before it. They fill in the numbers and nothing else, in particular not the fit/fill choice: both are legitimate against a screen, and guessing would discard the edges of a photograph for a user who wanted them. The list is panels rather than platforms, because a screen has one exact pixel count for ever where "what a photo site wants" would rot in the file. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
c75849040c |
Format the tree the way the gate asks for it
`cargo fmt --check` is a required step and had drifted across 45 files. Most of it arrived this week: several operations were written in parallel worktrees and merged by hand, and a hand-merge resolves conflicts without ever running the formatter over the result. No behaviour changes — this is `cargo fmt --all` and nothing else, kept as its own commit so the next reader can skip it wholesale rather than search it for one that matters. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
59362fcecf |
Let the copyright survive the export, and the GPS not
Carries the source's metadata all the way to the file the user hands over,
and proves in bytes that the coordinates do not come with it.
The privacy test was the piece that mattered and the piece that was wrong.
It searched the whole file for the two-byte hemisphere reference "N\0" or
"E\0", which is not a fingerprint of a GPS directory at all: sample 14 of the
sRGB tone curve inside the ICC profile every export embeds is 69, written as
`00 45`, and the next sample is below 256, so its high byte is `00`. Every
format would have failed a test about a colour profile. The needle is now the
twenty-four bytes a coordinate actually serialises to — three rationals, both
byte orders, since exif.rs writes little-endian and the tiff crate writes in
the host's — which cannot match by accident, and the retaining test asserts
the same needle is *present* so a search that could never find anything
cannot make the stripping test pass by being useless.
The batch exporter now hands the decoder's reading on to the encoder. It
already read the metadata for the orientation and the {date} token; passing
it through is what puts the camera, the lens and the rights statement into
the file. Nothing about privacy is decided there — dr-export takes that
decision once, from the settings.
The example passes it too, because it is the only place in the tree that
produces files a person can open in exiftool. A unit test can prove a GPS
directory is absent from a byte slice; only a real export proves a real
photograph comes out the far end still knowing which camera took it.
TRACES: FR-EXP-8
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
dtourolle
|
cd8750462f |
WIP: EXIF metadata on export
Checkpoint committed by the coordinator, not by the authoring agent: the session hit its API limit mid-task and left this work uncommitted. Committed so it survives, NOT because it is finished - expect failing tests and half-applied changes. The agent resumes from here. |
||
|
dtourolleandClaude Opus 5
|
914d14ec0d |
Tell the shader which colour space it is encoding for
The generated shader ended with `encode_srgb` and a clamp, so every photograph leaving DarkRoom had been through sRGB's gamut whatever the settings page said. Export refused the other three spaces rather than tag clipped pixels with a gamut they did not contain — correct, and not something an encoder could fix. So the output space becomes a parameter of composition. `compose_for` emits a constant primaries matrix after the camera matrix and before the clip, and generates the transfer function to match: the sRGB curve for sRGB and Display P3, a pure 2.199 gamma for Adobe RGB, 1.8 with a linear toe for ProPhoto. The ordering the camera matrix depends on is untouched — operations still run in camera space — and sRGB emits no conversion at all, so the shader compiled on nearly every frame is byte-for-byte what it was. The numbers live in dr-types, derived from four chromaticity pairs per space rather than tabulated. That is not tidiness: the shader encodes the pixels and the ICC profile describes them, and a file whose profile disagrees with its own contents is worse than one with no profile. One derivation makes them agree by construction, and can be checked against the values the specifications publish. Profiles are generated here too — minimal v2 matrix/TRC, about 2 KB, pure Rust, no lcms to satisfy under the NDK. A JPEG carries it in APP2, a PNG in iCCP, a TIFF in tag 34675. sRGB gets one as well, because untagged does not mean sRGB, it means guess. The refusal survives in a sharper form. A `Frame` now carries the space it was rendered in, and export refuses to label it anything else. The develop session still composes for sRGB, so a P3 export from the interface fails with an accurate error instead of producing a file that lies — the frontend half is a separate change. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
151dcc3c02 |
Make a file out of a photograph
Export existed as a settings page and nothing else: format, quality, colour
space, five sizing modes, a filename template and a metadata switch, all
configurable in detail, and no way to produce a single file. dr-export is the
other half.
**It returns bytes and a name, and writes nothing.** An export has three
destinations with nothing in common — a path on Linux, a SAF document on
Android where there is no path at all (ARCH §6.9), and a PUT to a Nextcloud
folder — so a crate that opened the file itself would serve one of them and be
rewritten for the other two. The caller places the bytes.
Resize, then sharpen, then encode, in that order and for a reason: output
sharpening compensates for the softening the resample introduced, so its
strength scales with how much scaling actually happened, and sharpening before
shrinking would throw the result away. Lanczos-3, separable, with weights
computed once per output row — FR-EXP-4 asks for Lanczos or better because a
box filter turns a distant fence into moiré.
Collision handling takes the "is this name taken" test as a closure rather
than looking at a directory, because there is no directory it could look at
that works everywhere. That shape is not politeness toward Linux: Android's
createDocument renames on collision by itself and cannot overwrite at all, so
all three CollisionPolicy settings need the answer *before* anything is
created. Overwrite, Skip and Increment are each tested, and Increment gives up
after ten thousand rather than spinning against a destination that reports
everything as taken.
Three things are honest rather than done:
- **Colour space.** sRGB only. The shader encodes and clips to sRGB before
this crate sees a pixel, so tagging a file Display P3 would claim a gamut
it does not contain. Refused with a typed error instead of mislabelled;
honouring it is a pipeline change (FR-EXP-2).
- **AVIF and JPEG XL.** No encoder. libaom and libjxl are C, ravif is slow
enough to change what a batch feels like, and the settings page offers
both because FR-EXP-1 lists them — so asking for one says so rather than
writing a JPEG under a .avif name.
- **16-bit TIFF** is a real 16-bit file carrying eight bits of information,
because AdjustPass renders to Rgba8Unorm. Widened by *257, not <<8, so
white lands on 65535 rather than a quarter-percent grey. Making it mean
what it says needs the composer told what format to write.
Metadata is not written at all, which satisfies the half of FR-EXP-8 that
matters most: strip_location defaults to on, and a file with no EXIF block has
no GPS tag. Retaining camera and copyright when asked is not implemented and
cannot be faked by omission.
Also here:
- `AdjustPass::export_pixels`, ungated where `read_output` is behind a
feature. The two are the same transfer and opposites in intent: reading
pixels back to *display* them is what ARCH §6.1 forbids and AC-8 asserts
against, while reading them back to encode a JPEG is the only way a file
has ever been made. Separate methods so the instrumentation can count one
without counting the other.
- `ExportTarget`, so a destination can be a folder on the server. On Android
that is the only destination needing no platform work whatsoever — a PUT
against create_dir, already on the RemoteBackend trait, behaving
identically on both platforms. Switching target clears the destination,
since a path is not a remote folder and carrying one across would offer to
create a folder called `home` at the library root.
Verified end to end rather than by unit test alone: `cargo run -p dr-export
--example export` decodes a frame, runs the develop chain on the GPU at full
resolution, reads it back, and writes all five formats — 27 ms for a
full-size JPEG, 165 ms with a Lanczos reduction to 1200px. ImageMagick agrees
the 16-bit TIFF is 16-bit. dr-export cross-compiles clean for
aarch64-linux-android; all three encoders are pure Rust, which is why they
were chosen. 944 tests pass, clippy and fmt clean.
Not yet wired to a button. The develop view has no export action, so nothing
in the running app can reach any of this yet.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|