4 Commits

Include renames

Author	SHA1	Message	Date
dtourolleandClaude Opus 5	1c0994c807	Demosaic a Fujifilm sensor instead of refusing it ... Every RAF stopped at the embedded preview, because the demosaicer had one kernel and it was a Bayer kernel. D11 makes Fujifilm first-class and FR-RAW-5 asks for it by name, so a hard error there was a promise we had not kept. X-Trans is a 6x6 tile, and nothing in the Bayer path survives that: the missing channels sit at different offsets at all 36 positions, so there is no fixed kernel to write. The new shader fits a weighted plane through each channel's samples in a 5x5 window and carries the other two channels across as the difference between those planes, keeping the pixel's own measured value untouched. A plane rather than a mean because the three channels are sampled at different places in the tile: a mean compares a red taken slightly left of the pixel with a green taken slightly right of it, and that offset is a colour cast that follows every gradient in the frame. The fit is done in white-balanced space, where the constant-colour-difference model it rests on is actually true of a neutral subject; that alone halves the error at a luminance edge. Two compromises, both deliberate. It is not Markesteijn. There are no directional hypotheses and no homogeneity map, so it does not resolve detail finer than the CFA period and a hard edge arrives about two pixels wide. It cannot ring — the output is bounded by the local sample range — so it does not produce the worms FR-RAW-5 exists to avoid, but the quality that requirement asks for is still owed. The tile's phase is guessed rather than known. rawler has each body's pattern exactly, as a 36-character string, but CfaPattern::XTrans throws it away before dr-gpu sees the file, and it is not a constant to hard-code: the bodies in that database start the tile at four different origins. So the phase is read back out of the pixels, by grouping the 36 per-position means and taking the grouping with the least spread. That part needs nothing from the scene. Telling red from blue does — shifting the tile by half a tile turns it into itself with red and blue swapped, so no geometry can decide it — and the as-shot white balance is what breaks the tie. A frame that is almost entirely one colour can defeat that; widening dr-decode to carry the pattern string would retire the guess altogether. The tests assert reconstruction, not success: a flat patch comes back exactly at all six phases tested, and a linear ramp comes back exactly too, which is the property the plane fit exists for and the one a mean would fail. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 08:46:28 +02:00
dtourolleandClaude Opus 5	d7aeafaf84	Move to wgpu 29, the version Slint can share a device with ... Groundwork for spike S1. Importing a texture into a Slint scene requires it to come from the *same* `wgpu::Device` Slint renders with, and Slint hands out a device of the version it was compiled against. Slint 1.17 offers `unstable-wgpu-28` and `unstable-wgpu-29` and nothing older, so wgpu 23 could never have met it: two semver-incompatible wgpu crates in one tree are two distinct types, and the device would not typecheck across the gap. The version is therefore not a free choice, and the manifest now says so — Slint and wgpu move together or not at all. The Slint requirement is also corrected from "1.9" to the 1.17 it has actually been resolving to. Nothing about the render path changes here. The readback bridge is still in place and still the display path, so this is verified by the tests that already existed rather than by anything new: 39 dr-gpu tests, which compare real pixels off a real device, and 888 across the workspace, all passing. Zero-copy lands separately and small. What the six releases cost, in full: - `ImageCopyTexture`/`ImageCopyBuffer`/`ImageDataLayout` became the `TexelCopy*` names (24). - `Instance::new` takes the descriptor by value, and `InstanceDescriptor` lost its `Default` — it carries a boxed display handle now, so a headless context says `new_without_display_handle` and means it. - `request_adapter` returns `Result` rather than `Option` (24). - `DeviceDescriptor` absorbed the API trace from `request_device`'s second argument and gained `experimental_features` (25). - `PipelineLayoutDescriptor` takes `Option<&BindGroupLayout>` per slot, and `push_constant_ranges` became `immediate_size`. - `Maintain` became `PollType`, and `poll` is fallible. Two of those are improvements worth having rather than churn. The error scope is a guard whose `pop` runs on drop, so an early return from the pipeline compiler no longer leaves a scope open on the device for whatever ran next to fall into. And a fallible `poll` reports a lost device (NFR-R7) at the point it happens, where before the map callback simply never arrived and the failure surfaced later as a readback that spun out its poll limit. Still to do for S1: dr-ui renders through `renderer-femtovg`, which is OpenGL. Texture import needs Slint itself rendering on wgpu. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 21:34:04 +02:00
dtourolle	5786977a51	Develop a JPEG through the same pipeline as a RAW ... DemosaicedImage gains a second producer, from_rgba8, alongside the CFA path. Nothing about the type is CFA-specific — it is "an image on the GPU, ready to adjust" — which is what lets develop mode work on a JPEG without the edit graph or any operation knowing the source was not a RAW file. The one real difference is the transfer function: sensor data is linear, a JPEG is gamma-encoded. Every operation assumes linear scene-referred colour (exposure is a multiply, and doubling a gamma-encoded value is not a stop), so the shader prologue linearises once, at the only point where the two source kinds still differ. The flag rides in as_shot_wb.w, which was padding. For a JPEG the white balance uniform is neutral and the colour matrix is identity, so both stay unconditional multiplies rather than becoming branches. max_dimension is exposed because it is a hardware limit the caller must plan around, not a failure to report afterwards: a 13728x8928 film scan exceeds the common 8192 texture limit, and fitting it first is the only way to develop it at all. Assisted-by: LLM	2026-08-09 21:07:20 +02:00
dtourolleandClaude Opus 5	78e3e6b846	Add the develop pipeline: demosaic and seven raw adjustments ... Decode through display, on the GPU: black/white normalisation, Bayer demosaic, camera colour transform, and the first seven adjustment operations — white balance, exposure, highlights/shadows, blacks/whites, brilliance, vibrance, saturation. Composable shaders. Each operation contributes a WGSL fragment rather than owning a pass, and dr-pipeline fuses the *active* ones into a single compute shader. One texture read and one write per frame regardless of how many adjustments are in play, while the operations stay independent in Rust — adding one is a new file, with no central shader to edit. An operation at neutral settings contributes no code, no uniform and no branch. Uniforms are prefixed per operation so two may both declare `amount`; helpers dedupe by name from a single source of truth. Pipelines cache on a structure hash covering the op-set and its order but not the values, so dragging a slider uploads uniforms and reuses the compiled pipeline. Measured on a 24 MP CR2: 0.60 ms re-render, one pipeline compiled across ten slider positions. The UI is generated, not written. EditGraph::capabilities() reports parameters with their kinds, ranges, defaults and current values; the panel builds one control per entry chosen by ParamKind. No file in ui/ names an operation, and dr-pipeline has no wgpu dependency, so codegen is testable without a device (ARCH §6.5a). Three defects found against real files, each silent: - rawler 0.7.2's `xyz_to_cam` is all zeros — deprecated and no longer populated. The live matrices are in `color_matrix`, keyed by illuminant. Reading the old field yields no colour transform at all. - `cam_to_xyz_normalized()` returns all NaN on any Bayer sensor: it divides each of four rows by its own sum, and the unused fourth (emerald) row sums to zero. Inverting the 3x3 ourselves avoids it. `wb_coeffs[3]` is NaN for the same reason and is normalised at decode. - As-shot white balance reached the uniform block but no shader read it, so the first render of a real CR2 came out violently green. Green photosites collect roughly twice the signal of red and blue. Now applied unconditionally before any operation, with tests on ordering. Demosaic is Malvar-He-Cutler rather than bilinear: gradient-corrected interpolation at one 5x5 neighbourhood per pixel, where bilinear leaves visible zippering on any high-contrast edge at 1:1. Two of the four packed CFA constants were wrong on the first attempt, so all four layouts are asserted to reconstruct the same colour. Crop origins at odd coordinates re-phase the pattern; without that, red and blue swap. X-Trans reports GpuError::UnsupportedCfa rather than approximating with the Bayer path, which would look like a corrupt file. 206 tests, including GPU tests proving every operation and the full seven-operation chain generate compilable WGSL. Known gaps: the display path still reads back to the CPU each frame, which ARCH §6.1 forbids and AC-8 asserts against — it is gated behind the `readback` feature and waits on spike S1 wiring Slint's texture import. Curve shapes are a first draft and want tuning against real photographs. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-09 11:37:58 +02:00