The presets sheet now lists the shipped collection beside the
photographer's own, a copy under a shipped name overrides it, and
shipped and imported presets are looks that leave a photograph's own
corrections alone. The manual says so where it introduces the sheet,
and FR-DEV-6 states the rule. The sheet's screenshot (media/presets.png)
predates the sections and needs re-recording.
The manual described the review (7c9a4ee) without a picture, because the
demo library holds no duplicates. The new duplicates scene makes two:
it copies two New York frames into a bck folder beside their own,
restarts the app so the scan finds them, waits for the sidebar row the
sweep's dating brings (54aee50), opens the review from it, presses
Check and takes the page. It deletes the copies and restarts on the
library as it was; record.sh's snapshot restore would remove them too.
It is registered last, so no other scene sees the copies.
The picture shows both groups proved the same file, the camera-named
copy outside bck marked Stays, and "Move 2 copies to trash" ready.
Every scene was recorded again on a release build of this commit with
the automation feature. Master changed what nearly every picture shows
after they were taken: scrollbars on the develop column, the grid, the
sidebar and Settings; a "?" beside Settings in develop's top bar, with
its controls regrouped; the Film row opening its list as a popup.
The film scene pressed the list's rows through the develop column, which
no longer holds them: the list is a popup, and the automation hook
reports its contents relative to it. The scene now opens it with
film_list_open, turns the wheel down it and back so the popup and its
scrollbar are seen scrolling, and clicks Velvia at its popup position
plus the popup's origin. The caption says so. film_reach passed in the
same run: the last stock was reached by the wheel, a drag, the scrollbar
and the keys.
Looked at as contact sheets of each GIF's middle and last frames and
each PNG. launch, launch-folder, library-nesting.png and
library-collection-menu came out byte-identical after optipng and are
unchanged. develop-zoom's deepest frames are smooth on Xvfb as before;
its caption does not claim blocks. Settings shows version 0.15.0,
the build's own, until the release commit bumps it.
The manual described what the pictures show and missed what this round
changed around them:
- Rating and flagging gave stars only. The keys (0-5, P, X, U), Flag on
the selection bar, judging in develop without moving on, and the flag
and stars on the roll's cells had no sentence.
- Nothing said the desktop draws scrollbars on the grid, the sidebar,
the develop column and Settings, or how the grid's bar is used.
- Nothing said how to open Help: the header's Help or F1, and in
develop the "?" beside Settings (d9f2596, 380cfda), with its See it
links and its Manual button.
- Stepping along the roll now goes on past what the roll has loaded
(a030bfd); Settings gained the duplicate originals line and the
Manual row.
index.html is regenerated from the README.
The open stock list showed ten rows, None to Kodak Kodachrome 64, and
the other eighteen - all seven black-and-white stocks among them - could
not be reached. The data was whole; the list could not be scrolled.
Reproduced on the manual rig (Xvfb, xdotool, the automation hook):
- a drag on the list scrolled the develop column, never the list;
- a wheel run over the list scrolled the column past it, whenever the
column had scrolled under that pointer in the last 800 ms - which is
how the list is reached, by wheeling the column down to it. After a
pause and a pointer move the wheel did reach the list;
- no key did anything.
The cause is Slint's routing, not the list. Since 2d878c2 the list was a
Flickable inside the develop column's Flickable, and Slint offers every
pointer event to the outermost Flickable first
(input_event_filter_before_children, i-slint-core 1.17.1 flickable.rs).
The column holds a press back (DelayForwarding) and intercepts the first
move past 8 px on the axis it can scroll, so the list never saw a drag.
For the wheel it intercepts while its own last wheel event is under
800 ms old and within 2 px, and always for a touchpad gesture that opens
with TouchPhase::Started - so on a touchpad the list could get no wheel
at all.
The list is now a PopupWindow under the Film row. A popup is its own
item tree: while it is open, events go to it and to nothing beneath it,
so the list scrolls by wheel, drag and flick however the panel is nested
and whatever the column did last. The alternative, standing the column
down while the pointer is over the list (the sliders' hover trick), fixes
the drag but not the wheel - `interactive: false` does not gate wheel
interception - so it would have left the bug for touchpad users.
The reason 2d878c2 bounded the list still holds: it is at most 320 px
and never lengthens the column, and now it covers the sliders instead of
pushing them down. The column cannot be scrolled while it is open, which
suits a one-click question; it closes on choosing, on Escape or Back, or
on a press outside it.
Keys, with the list open: Up and Down move along it from the chosen
stock and scroll it into view, Enter chooses, Escape or Back closes it
unchanged. A popup is its own focus tree, so the keys are taken when it
opens and Slint returns focus to the develop view's scope when it closes.
The Film row gains a button role, so a screen reader and the automation
hook can name it.
Every scene was recorded again on a build of this branch rebased onto the
keyboard work and TD-1, since nearly every scene depends on files those
changed: the develop top bar now carries a star strip and Pick/Reject, the
roll shows flags and stars, and the grid's selection bar gains Label and
Flag. `--changed` could not be trusted to find them, because the rebase
made each picture's commit newer than the sources it was recorded from.
The develop-zoom caption said the wheel goes on "until the pixels are
blocks". On Xvfb the deepest frames come out smooth even though the app
draws past 1:1 nearest-neighbour on a real display (confirmed by eye on
the desktop), and a GIF shrunk to 960 wide could not show 3-pixel blocks
anyway. The caption now says what the clip shows; the prose above it,
which describes what the app does, stays.
The rebase combined this branch's README additions with master's, and
index.html is generated from the README; manual-check passes on the
regenerated page.
The sheet could now offer "See it", but no gesture said where to look.
Every GESTURE tag whose move the manual describes names that section:
the white-balance picker, zoom and pan, masks, undo and snapshots,
export, colour labels and ratings, selection, collections, the People
page, thumbnail size. Fifty of the fifty-one; the one left, putting a
single control back to its default, has no section and is too small to
earn one.
Three important gestures had nowhere to land, so the manual gains three
short sections, without pictures for now: Bursts (opening a folded
burst, choosing the frame it shows, and the eyes-open filter), Moving
between photographs (the roll, the arrows and A/D in develop) and
Copying settings (Copy, Paste, Paste to N, and choosing what a copy
carries). The page, the gesture book and docs/gestures.md are
regenerated from them.
The packages now carry the manual, but nothing in the application opened
it: the help sheet listed gestures and stopped there.
The help sheet gains a Manual button beside Done, and Settings a Manual
row under About beside the version. Both go through dr_ui::manual, which
finds the installed page through dr_plat::system_data_dirs (the package's
share directory on Linux, the executable's directory on Windows), and a
development build also in the checkout it was compiled from. A copy with
no manual says so on the status line rather than doing nothing.
On the desktop the page goes to the system browser. A section is a URL
fragment, and xdg-open's generic mode and Windows' FileProtocolHandler
both turn a file: URL into a path and drop the fragment, so a section is
opened through a one-line redirect page written to the data directory:
the opener gets a plain path, which every opener keeps, and the browser
follows the redirect to index.html#section itself. The launcher behind
the sign-in's open_in_browser is split out so both share it; the https
check stays with the sign-in.
Android has no path to give a browser: an asset is not a file, a copy in
private storage is unreadable to other apps, a file: URI across apps is
refused, and a content: URI leaves the browser resolving every picture
against the provider. So ManualActivity, a WebView reading
file:///android_asset/manual/index.html straight out of the APK, shows
it, started by class name with the section as an extra. JavaScript is
off, links off the page go to the browser, and the theme is day-night so
the page's own light and dark follow the system. A test checks that the
manifest, the Java class and dr_ui agree on the name and the extra.
The manual existed only as docs/manual/README.md, which the forge renders
and nothing else does. An installed copy of the application, on a laptop
with no network or on a tablet, had no manual it could open.
`traces manual` renders the README to docs/manual/index.html with
pulldown-cmark (already in the tree as Slint's Markdown parser, so this
adds a dependency edge and no crate). The page is one file with an inline
stylesheet that follows the system's light or dark preference, a
contents list of every section and subsection, and the pictures by their
relative media/ paths. Each heading carries the id the forge gives it, so
README.md#rating-and-flagging and index.html#rating-and-flagging are the
same link. A picture alone in its paragraph becomes a figure whose alt
text is shown as the caption, and every picture reserves its 16:11 box
before it loads, so a jump into the middle of the page lands where it
aimed rather than a screenful above. Links to design documents, which the
installed page has no copy of, point at the forge.
The page is committed rather than rendered at build time, as the gesture
book is: it is user-facing text reviewed in the diff, and the three
packagers then only copy it. `traces manual-check` fails in CI when the
committed page is not the render of the README, and the pre-commit hook
regenerates it when the README is staged.
dtourolle