c343ac79d39d21959db1de8a017dade940f05146
28
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 dtourolle
|
2e7f14dafe |
Develop every raw through the AI denoise by default, with a strength, cached
The learned demosaic was an option under Detail, off by default. It is now how a Bayer raw is developed: on by default at full strength on every device — which hardware runs it is the inference engine's choice — and first in the Adjust panel, since it decides what every control below is applied to. Strength (0-100, default 100) replaces Keep grain: grain = 100 - strength, the same luminance-only blend, so moving it is one GPU pass and never a re-run. 0.21.0's sidecars stored grain; it is still read, as the inverse, and never written. With it on for every photograph, the result is now kept on disk (denoise.md §7.1, §12): the network's output as half floats, keyed on a SHA-256 of the file's bytes and the model, oldest first past a 5 GB budget, beside the inference engine's cache. A reopened photograph and an export of one already developed read it back instead of running the network again; a damaged entry is a miss. |
||
|
dtourolle
|
8294e6b59f |
Call the reference curve what it is, and drop wording that reads as copying
The view transform's second curve is the DNG SDK's published reference
rendering — the ACR3 default curve applied by RefBaselineRGBTone — so
it is the "DNG Reference" curve in the panel, D21 and the code, not a
name borrowed from another product. Comments and docs that justified a
choice by another editor doing it ("as their Amount", "so a
photographer arriving from it finds the name") now give the actual
reason. The Vivid presets no longer describe themselves as reaching
for another editor's look; they are DarkRoom's own.
Factual mentions stay: which program wrote the library's DNGs, what
was measured against, and preset import. camera-profiles.md gains §15,
on starting a photograph from the edit it already carries.
|
||
|
dtourolle
|
e12783da9f |
Open a photograph with the edit it already carries, when DarkRoom has none
The library's DNGs carry the photographer's earlier develop settings in their embedded XMP — the house style their photographs were made with. A photograph opened with no edit of DarkRoom's now starts from that earlier edit, translated (HSL bands, highlights, blacks and the rest), as one undoable step named "Earlier Edit"; from there it is an ordinary edit, saved with the photograph. Export does the same, so a photograph never opened exports as opening it would show. Only on positive evidence that there is no DarkRoom edit: a local file with no sidecar beside it, or a server that answered "no such file" with nothing in the cache. The stored-edit fetch now says which (FetchedSidecar::absent). Offline, unreachable or unreadable never counts — the earlier edit would otherwise be saved over a real edit that merely failed to arrive. |
||
|
dtourolle
|
0730ef1016 |
Sync camera profiles through the library, and name the tone curves
camera-profiles.md §13: the derived sync pass gains a profiles step, after the catalog and before the place, that exchanges the profiles directory with <library>/.darkroom-derived/profiles. Profiles are immutable and named for what they hold, so name and size decide: it uploads what the server lacks or holds at another size and downloads what this device lacks — parsed before it is kept, written beside its name and renamed — then reloads the set, so a profile copied out of a DNG on the desktop renders the body's CR2s on the tablet after its next sync. Like the place it never fails the pass. Not a catalog table: a schema change would stop an older peer merging at all. Labels for the view transform's new curve choice: Curve, Camera Raw, Sigmoid. |
||
|
dtourolle
|
ad6bb892f3 |
Carry the learned denoise's switch and grain as edit settings
Whether to use the learned denoise, and how much grain to keep, are what a photographer sets, so they travel the one road every setting does: published as a capability, captured by Preset, stored in the sidecar, replayed by the undo stack (FR-DEV-3c). Published only on a photograph that can take it, for the lens switch's reason; the availability is derived from the file and is not in the state. Off by default, grain 0; a reset returns both. |
||
|
dtourolle
|
eae720ce75 |
Say which camera profile a photograph renders through, and offer to copy it
The info panel gains a line under the lens: "Adobe Standard · in the file", the .dcp it came from, "· off" when the photographer switched it off, or "No camera profile · matrix only" — the ordinary case for a CR2, worded as a fact rather than a failure. A DNG whose embedded profile may be copied, for a body with no installed profile, also gets "Use this profile for every Canon EOS 6D →", which saves it into the profiles directory; the body's CR2s render through it from their next decode. The profiles directory is <data>/profiles, read at start-up on desktop and Android before anything decodes. The library open path never set the lens line; it now sets both. Labels: Camera Profile, Use Profile, Look Amount. |
||
|
dtourolle
|
92afaebd34 |
Make the view transform an operation the photographer can set
FR-DEV-3j gives the view transform two controls, contrast and the white point in stops above middle grey, persisted and held per mask layer like any other setting. A scene-referred pipeline whose white point cannot be moved hands the photographer a shoulder they cannot place. `view_transform` is a hand-written node in `Stage::View`, a new stage the composer emits last and emits whatever the node's state: a neutral operation is otherwise left out of the shader, but a photograph with no view transform is a scan. "Active" keeps meaning "moved from the defaults", so an untouched photograph writes nothing for it and `every_node_starts_neutral` still holds. A caller whose chain holds no view operation gets a default one. The composer's loop becomes an ordered list of steps — camera nodes, the matrix, scene nodes, layer-only nodes, the view — so each is emitted in exactly one place. The base curve could not be a node because it belonged to the camera; the ops README records why that argument went with it (D19). The panel shows it in the Light group as "Tone Mapping". Tests that counted the blocks of a neutral graph now count one, the view transform, and the two chain-wide tests that load a film expect the view transform to be absent, since a stock replaces it. |
||
|
dtourolle
|
114d979397 |
Add Vertical and Horizontal perspective sliders to Compose
The keystone existed in framing but nothing in develop could reach it:
framing is presented by its own Compose panel rather than generated, so
new framing parameters get no control until the panel names them.
Compose now has Vertical and Horizontal sliders under Straighten,
mirrored from the session like the angle, recorded as parameter steps
("Vertical Perspective" in the history), cleared by the Compose reset
and by opening the next photograph. Releasing either slider refits the
crop the way releasing the straighten slider does: a keystone alone
needs no crop, but it moves the empty corners of a straightened frame,
so the crop that avoided them before may not after, or may have room
to grow back.
|
||
|
dtourolle
|
d3b6127db6 |
Let a photographer name the state they liked, and go back to it or look at it
FR-DEV-5 asked for named snapshots of an edit state and FR-DEV-7 for a comparison against a chosen one, and neither existed. The history stack is per sitting and forgotten with it, on purpose — the gap that mattered was an automatically saved mis-drag with no way back, and that was closed first. What was left was the other half: a state the photographer wants to keep *because* it is worth keeping, which is a different thing from a step and is not served by making the steps last longer. A snapshot is an edit state, and an edit state is exactly what a sidecar version stores, so it is stored as one: a `[version]` block carrying `snapshot-of = <uuid>`. The parameters, the masks and their parts, the repairs and the film all arrive through the blocks that already carry them, a merge keys on the uuid as it does for any version, and a build that predates the key reads the block as a named version and keeps it — the right failure. Only the pointer is new. The one reader that has to know is `default_version`, which must never answer with a snapshot: a file whose edit is missing is not a file whose edit is one of its saved moments. The snapshots of an edit are listed by that pointer, oldest first, the same on every device. Writing them back removes what this sitting deleted and puts in what it holds, and leaves standing whatever it never saw — a snapshot the other device took since the photograph was opened here is not this device's to remove by not knowing about it. That is the rule the version merge already keeps, applied one level down, and it is why the save carries the deleted ids rather than replacing the list wholesale as the masks are. Each is re-pointed at the uuid the save settled on, because the default may have been fused onto its canonical identity since the snapshot was taken. Restoring is one history step, so undo takes it back whole, as a paste is. Taking and deleting are not steps: they change nothing about the photograph, and an undo that removed a snapshot would be undoing a decision to remember. Holding the eye beside one renders the snapshot and hands the edit straight back — the same suspension "Before" uses, against a point the photographer chose rather than the file. Two sessions on the same photograph get ids that cannot collide, stamped with the second and a random word, because the merge folds equal ids into one. |
||
|
dtourolle
|
4574c35236 |
Let a part be left out of a mask without being taken out of it
A layer built from parts was missing the one control a correction most often wants: seeing what it did. The question a subtracted gradient raises is whether it took only the sky, and the question a stroke raises is whether it filled the shoulder — and the only way to ask either was to remove the part and look, which answered the question and lost the part. The layer's own ring answers a different question, about the adjustment, and hiding eight layers to check one correction is not an A/B anybody performs. So a part carries `hidden`. It is an edit and a history step, as the layer's switch is, and it is folded into the render fingerprint because hiding a part changes the mask as surely as removing it does. Where the mask is built the shown parts are walked rather than the parts, which is what makes a hidden base hand the fold to the first part that is shown — and a revealed layer whose every part is hidden clears its slice rather than leaving whatever the last rasterisation put there to be read back. `covers` asks the same shown parts, so a layer whose only adding part is hidden costs no slice at all. In the sidecar the key is `hidden`, in the part's block or, for the base, in the mask block — under a word that cannot be confused with the layer's `enabled`, which has always meant the layer. Absent means shown, so no file written before the switch existed reads any differently. The row wears the same ring the layer does, one row down, because it is the same question about a smaller thing. |
||
|
dtourolle
|
df741a8a49 |
Let one mask be built from more than one selection, and paint into it
A mask the model draws arrives approximately right — stopping inside a shoulder, leaking into the hair — and FR-DEV-3's edge controls move the *whole* boundary, so no value of feather or dilation fixes two errors that go opposite ways. What fixes them is a second selection joined to the first, and a layer that held exactly one source had nowhere to put one. The brush the core has had all along was reachable from no control in the application. A layer is now an ordered list of parts. Each names a source and how it joins the mask before it — added to it, or taken out of it — and carries its own edge treatment, because a model's soft coverage and a stroke painted where it stopped short do not want the same feather. Invert and opacity stay on the layer, where the composed shader already reads them. The sidecar grows `[part]` blocks and nothing else. A layer of one part writes exactly the bytes it always did; a mask block with no part blocks after it reads back as one part; and a stroke, a join or a source this build cannot read costs that part rather than the layer. So every sidecar in every library still parses to the edit it always was. On the device the parts fold into the layer's one slice, so eight layers still cost eight channels: union is a `max` blend and subtraction is the erase blend the brush already used. A part is drawn into a scratch texture before it is joined, and that is not incidental — an erase stroke means a hole in *that part*, not a hole in the mask, and drawn straight onto the accumulator it would punch through the subject underneath. A layer of one part skips all of it and takes the path it always took. In the interface: a part list under the selected layer with a chip saying which way each joins, Add and Subtract beside it, a Select/Paint/Erase strip with the brush's size, hardness and flow, and a drag on the photograph that paints. Pressing Paint on a mask that cannot hold a stroke joins a part that can, rather than explaining that a subject is not a brush. A whole stroke is one step in the history. The edge controls now shape the part that is selected rather than the layer, which is the one behaviour change to an existing control: with a correction selected, the feather slider softens the correction and leaves the model's mask alone. |
||
|
dtourolle
|
af89433aee |
Offer the lens profile as a tick box, since applying it silently reads as absent
The develop panel's Optics group is three manual sliders: distortion, chromatic aberration and lens vignetting. The automatic correction was already there — the file's EXIF lens is matched against the bundled Lensfun database on open and the coefficients are fanned out to all three — but nothing in the interface said so except a line of grey text under the camera reading "· corrected", and there was no way to decline it. From the outside that is indistinguishable from the feature not existing, which is how it was read. `dr-lens` states the rule this breaks: an automatic correction that silently does nothing is worse than one the user can see is unavailable. The caption satisfied the letter of it and not the point — a photographer looking for "apply the lens profile" found three sliders and no switch. So the profile is now a control. It is a capability rather than a flag on the session, because everything a photographer sets travels one road: the capability list feeds the generated panel, `Preset` captures it, the sidecar stores it and the undo stack replays it. A bool on the side would have needed adding to each of those four by hand and would have been forgotten in at least one — which is exactly how the mask stack came to be missing from the history. It is on by default, which is what `switch_on` is for: the coefficients are a measurement of the lens that took the photograph, so accepting them is neutral and declining them is the edit. The sidecar therefore stores nothing for the ordinary case and the correction still happens. The switch appears only where a profile was matched. A tick box on a photograph whose lens the database has never heard of would be a control that looks available and does nothing, which is the failure the rule above names rather than an instance of following it — those photographs are told "· no profile" in words instead, and one whose box is unticked now says "· profile off", which is a third fact and not either of the other two. Two things had to be built underneath. `ParamKind::Bool` was in the core's closed enum and mapped to a row kind here, and had no control behind it in `adjust.slint`: a parameter declaring itself a switch was flattened into a row that drew nothing at all. Nothing shipped had one until now, so the gap cost nothing and was invisible. And `Check` self-toggled, which is right for a settings page that owns its value and wrong for a panel row that is a view of the edit graph — the click would have answered by replacing the binding with a literal, and the next undo or pasted preset would have moved the value with the tick left where the finger put it. It now takes `controlled`, and the generated row uses it. The manual sliders are unchanged and still trim whatever the profile leaves, so switching it off is "correct this by hand" rather than "stop correcting". |
||
|
dtourolle
|
901f51e6c4 |
Point at something grey and let the pipeline work out the rest
FR-DEV-3 has asked for "white balance (temperature/tint, and picker)" since it was written, and only the first half existed. `WidgetKind::WhitePoint` was in the vocabulary and `develop::supported` answered false for it, so the node degraded to two sliders — correct behaviour that had quietly become the only behaviour. Sampling a neutral is the first move of the global tonal pass and every colour judgement afterwards is measured against where the grey was put, so guessing at two sliders until a wall stops looking green is the wrong way round. The awkward part is that a picker genuinely needs to know how far a hundred units of temperature move red against blue, and that number is declared in the node's own file. So the inversion lives in `dr_pipeline::neutral` rather than in the interface: the canvas hands over a colour, the core finds the operation that asked to be driven by a pixel and bisects its declared response until the sample comes back grey. Nothing in `ui/` names white balance, and nothing holds a second copy of a response that would be wrong the first time somebody adjusted the range. A bisection rather than a closed-form inverse because only monotonicity is part of the bargain — the expression is free to become a table tomorrow. The result is rounded to the precision the control is drawn at, which is not cosmetic: unrounded, sampling something already neutral lands a ten-thousandth off zero, and the photograph comes back modified with an undo step for a correction of nothing. On the panel side this needed one distinction the generated path was missing. `is_on_canvas` was being read as "and so the panel draws nothing for it", which is right for a crop — four edge fractions are not controls anyone drags in a list — and wrong for an eyedropper, which *writes* temperature and tint and leaves them exactly the controls a photographer reaches for next. So a sampling widget keeps its sliders and puts the affordance that arms the canvas in the group's heading, built like the reset beside it. One click, one sample, one history step: `Edit::Action` never coalesces, and there is no hover preview to fill the stack with temperatures nobody chose. Declaring the presentation also groups temperature and tint under one undo step, where they were two. That follows from what `Presentation` means and reads correctly — white balance is one decision — but it is a change, and worth saying so. |
||
|
dtourolle
|
68ebf5d78b |
Let a mask start from a tone or a colour, not only a shape
Every local adjustment began from a shape: painted, drawn with a handle, or found by a model. So the only way to hold back a sky was to draw a line near where it ended, and the only way to warm skin was to paint round it — both of which put the edit's edge where the photographer put a gesture rather than where the picture changes. A gradient across a treeline halos, and an adjustment traced round a face stops on the outline of a hand. MaskSource grows two variants that select by what a pixel *is*. Luminance carries two bounds on the perceptual tone scale plus a softness; Colour carries an arc of hue, a range of chroma, and one softness for every edge of both. Five floats and three, so they diff, sync and merge per field under FR-NC-9 exactly as a gradient's geometry does — the property a stored raster has none of, and the reason the model's coverage had to sit beside its source rather than inside it. The pixels are the shader's business and nowhere else's. `mask.wgsl` takes the demosaiced source as a sixth binding and two new modes read it: decode, balance, pull a clipped photosite back to neutral, apply the camera matrix, then weigh the band. Nothing crosses to the CPU but the numbers and the matrix, and each mask texel averages its own footprint in the source, so a band lands on the tone an area is rather than on whichever texel a proxy grid happened to land on. The photograph it measures is the one the camera recorded, before this edit. A band over the edited result would slide out from under the edit as the edit was made — raising the highlights would change which pixels counted as highlights, and the slider would chase its own mask. Feather, falloff and morphology stay off a range layer, which is what `shapeable` already meant. All three are functions of the signed distance from a boundary, and a range has no boundary to be at a distance from; its edge is the softness of its own band, in the band's units. Offering them would be four controls that move and change nothing. |
||
|
dtourolle
|
81b1ae8c42 |
Measure the haze from the picture, and divide it back out
Four files named dehaze as a member of the compositional detail family — `detail.rs` twice, `dr-gpu`'s detail module, `ops/README.md` and `capture_sharpen.rs` — and no such node existed. Every one of them was describing the family by listing clarity, texture and a control the photographer could not reach. Haze is the one degradation the controls already in the chain cannot remove, and the reason is spatial rather than tonal. Scattering composites an airlight over the scene in proportion to distance, so the lift is per-pixel: a black point that clears the mountains crushes the foreground, and a contrast curve that clears the mountains does the same. So the node has to estimate the transmission at every pixel, which is the dark-channel prior — the local minimum over the channels and over a patch is the airlight that has been added there — and then invert the scattering model with it. The airlight is taken as neutral and as unit, which removes the one part of the published method this stage cannot perform. Estimating it properly is a whole-frame reduction, and the detail chain has none: it hands each pass the pass before it. It is also unnecessary, because white balance is the first node in the chain and has already driven the illuminant to grey, so only the magnitude is unknown — and an unknown magnitude on the veil is a scale factor on the amount slider, which the photographer is setting by eye regardless. The patch is a fraction of the frame's shorter edge, through `RenderScale::frame_fraction`, and never a count of pixels. It has to be wide enough to contain something dark and narrow enough that what it measures is still local, and both of those are statements about how much of the composition it covers — so it must cover the same proportion of the picture on a proxy as in the export, or the file is sharpened for a patch three times narrower than the one that was tuned on screen. Affording it needs an identity a Gaussian does not have. Erosions compose by adding their structuring elements, so the minimum over a run of d followed by the minimum over k points spaced d apart is the exact minimum over the whole kd window. At the square root that is 16 taps rather than 61 at 4K, and it is the same filter rather than an approximation of one — which is the difference from the strided kernel `local_contrast` refuses, where sampling an image that is not band-limited aliases into the base and comes back as mottling. It runs first among the compositional detail nodes, at order 125: after noise reduction, because dividing by a transmission below one amplifies the noise in the veiled distance by exactly the factor it recovers the contrast by, and before clarity and texture, coarse before fine, so that their base is computed on the picture the veil has left rather than on a modelling about to be divided out. What it cannot honour is the placement dehaze most wants. It shifts colour — it subtracts a grey term and rescales, so saturation changes wherever the veil is thick — and the colour work would ideally be correcting the picture that leaves here. The detail stage runs as a group after every point operation, because a neighbourhood pass is a separate dispatch over a texture the fused pass has finished writing, so an order placing this node ahead of `vibrance` would be a lie the chain cannot tell. Interleaving would mean splitting the fused pass in half around it, at the cost of a second full-frame dispatch and intermediate for every edit in the catalogue whether it dehazes or not. The declaration records that rather than leaving it to be rediscovered. FR-DEV-18 is added to the requirements register alongside it. The tag had nowhere to point, and an orphan tag fails the traceability gate rather than quietly counting for nothing. |
||
|
dtourolle
|
7c3e1d2c54 |
Let the shadows and the highlights carry a colour the picture never had
The colour mixer is the only chromatic control in the chain, and it can only turn a hue that is already in the frame. Ask it for cool shadows against warm highlights and it has nothing to take hold of: the shadows of a correctly balanced photograph are near enough neutral that there is no band there to turn, and a monochrome conversion hands it a picture with no hue in it at all. Split toning is the oldest look in the book and every developer worth comparing against ships it; there was no way to reach it from here. So colour_grading, declared like any other node — a hue and a strength for the shadows, the midtones and the highlights, and a global cast over the frame. It targets a tonal range rather than a hue, which is the whole difference between the two controls: it puts colour where none was rather than turning what it finds. It sits at 105, after the mixer has had the last word on the colours that are in the picture and before the detail stage. The mechanism is one helper. Three cosines 120 degrees apart are the hue wheel written directly as an RGB direction, and their sum is zero at every angle, so exp2 turns them into three gains whose product is exactly one — a cast tilts the balance without moving the level. A grade that doubled as an exposure change is the failure that has the photographer chasing brightness with a colour slider, and it is corrected with a control that cannot reach it. The three tonal weights partition the scale rather than overlapping, the midtones being whatever the two ends leave, so setting all three to one hue is exactly the global cast and a split tone does not colour its own midtones as a side effect of its halves meeting. Full strength is half a stop on the leading channel, the ceiling white balance already holds itself to. Neutral is declared rather than inferred, which is what `active:` is for. A hue with no strength behind it is a direction with no distance, so under the default rule nudging one would have put the node into every fused shader for a change nobody can see. Summing the strengths is zero exactly when all four are, and they cannot go negative to cancel each other. The opposite reading — neutral as "nothing has been touched" — fails the other way round: red is hue zero, so a grade toward red never moves a hue off its default and would never have been applied at all. It asks for a colour wheel, the widget the descriptor vocabulary has been carrying with no operation behind it. Nothing draws one yet, and that is fine by construction: the panel takes the first widget it implements and falls through to sliders otherwise, so this arrives as eight ordinary controls that work. Each parameter is named for its own range for exactly that reason — in a flat list, four sliders called "Hue" are four controls nobody can tell apart. FR-DEV-12 is written into requirements.md beside it. A TRACES tag naming a requirement that is not defined there is an orphan, and the traceability gate fails on those rather than quietly counting them. The label catalogue gets one line for the operation's display name; the eight parameters derive correctly and are left to. |
||
 dtourolleandClaude Opus 5
|
a1165ef182 |
Put the coordinate-domain lens corrections into the graph
`lens.rs` has held a `Warp` trait, a composer and two implementations — distortion and lateral chromatic aberration — since they were written, and `compose_warps` was called by nothing outside its own tests. The corrections existed, were correct, and never touched a photograph. `EditGraph` now holds them, and `compose_full` emits them between the framing prologue and the fetch. Distortion first, then CA: each warp receives the position the previous one produced, and lateral CA is a magnification about the optical axis of the *undistorted* frame, so measured on a barrel-distorted one it would be fitted to a radius no profile describes. They reach the panel the way framing already does — through `capabilities`. That was the one open question and existing practice answered it: framing is also not an `Operation`, also has parameters a photographer sets, and also arrives through that list. Because `Preset::capture` walks the same list, the sidecar, the clipboard and the undo stack carry a warp's parameters with nothing registered anywhere, and no file under `ui/` names one (FR-DEV-3a). `state()` destructures `EditGraph` field by field precisely so that a new field cannot be forgotten, and it was not. Chromatic aberration is the only thing that samples per channel, and `splits_channels` is what keeps everything else from paying for it. Red and blue are fetched from positions green is not — green is the reference and never moves, so a wrong correction still leaves one channel sharp rather than softening all three. With no CA in the chain the single-fetch path is emitted instead. The interpolating sampler is now chosen by framing *or* an active warp. Asking framing alone would have nearest-neighboured a distortion correction on an unstraightened frame, and that aliasing reads as a bad profile rather than as a missing filter. The warps go in the geometry invalidation key rather than the colour one: they decide which source pixel a colour is read from, so a tile cached across a distortion change would keep drawing the previous correction. The pipeline cache needs nothing new — `hash_source` already covers the generated body, and uniform values never enter it, so arming a warp recompiles and dragging it does not. Both are asserted. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
e17b909d41 |
Connect the lens vignetting correction to the pipeline
`ops/vignetting.rs` has carried a complete descriptor, polynomial, helper and test suite without an entry in `ops/`, so it was never in `chain()`. It reached no photograph and no panel, and `Attribute::Optics` was an empty category in consequence — filtered out of the tab strip for having no rows, by a chain that had never been given its only member. Declaring it needs the one thing the operation was written against and which did not exist. `wgsl_body` reads `radius`, and the module claimed "the composer publishes `radius` in the shader prologue for exactly this reason". It did not. `sample_source` now does, in both sampling branches, beside the `source_px` it already published for the same class of caller. It is corner-normalised there, which is the part that is easy to leave out. `p` spans ±0.5·aspect, so its length at the corner is 0.5·length(aspect) — about 0.901 on a 3:2 frame, not 1. Lensfun's polynomials are fitted against a corner radius of 1, so passing `length(p)` straight in evaluates every one of them short of where it was measured, by a factor that changes with the aspect ratio. It would have read as a correction that is simply too weak, which is indistinguishable from a bad profile. Both `lens.rs` and `framing.rs` asserted the normalisation `p` does not have; corrected. `order: 5` puts the correction ahead of the tonal stages, and the ordering is load-bearing rather than tidy. Recovering a corner means dividing by an attenuation below one — about two stops for a fast prime wide open — so run after the highlights have been rolled off and clipped, the lift has nowhere to go and the corners posterise instead of brightening. `layer_chain` now drops `Optics` as well as the neighbourhood operations. A local vignetting slider would have worked, which is what makes it worth excluding: `radius` measures from the centre of the whole photograph and a mask cannot move the optical axis, so it would lay a frame-centred radial ramp across the picture and multiply it by the mask. The existing exclusion covers operations that move and do nothing; this one covers an operation that moves and does something its name does not promise. The rule both share is now written down. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
8e7b1350bf |
Name the frame's category for the decision, not the maths
`Attribute::Geometry` becomes `Attribute::Compose`, and `film_sim` moves from `[tone, colour]` to `[effect]`. Two categories were doing the wrong job. "Geometry" describes what crop, straighten and the quarter turns do to coordinates — but it describes lens distortion correction exactly as well, and that is not a compositional choice at all. Naming the attribute for the photographer's decision is what separates it from `Optics`: one is what the lens did, the other is what they chose. The maths the two have in common is not the thing worth filing them under. A film stock declared both `tone` and `colour`, so "Kodachrome" appeared in the Light group beside exposure and again in Colour beside white balance — two places, neither of which is where anyone looks for it. It is neither: `Effect` is defined in this same file as "applied rather than corrected — a look, not a fix", which is what a stock is. That it moves tone and colour is true of every look, and is not what the attribute is for. `from_name` still accepts "geometry" on the way in. That string is persisted in `develop.copy_attributes`, and an entry it fails to parse is not an error — `presets::scope_for` logs it and drops it — so without the alias an existing settings file would have quietly narrowed what a paste carries. `name` writes the current spelling, so the file migrates itself the first time it is saved. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
4efab496c2 |
Put the refinement on a slider, per layer
Benchmarks / CPU and I/O (per commit) (push) Successful in 3m27s
Benchmarks / Frame budget (on demand) (push) Skipped
🐳 Android image / Build and push (push) Successful in 3s
Build and test / android-image (push) Successful in 3s
Build and test / Desktop (Linux) (push) Failing after 1h14m30s
Build and test / Layer separation (push) Successful in 43s
Traceability / Requirement traces (push) Failing after 46s
Build and test / Android (aarch64) (push) Successful in 1h8m56s
The evidence was being gathered and spent immediately at one strictness nobody could see or change. This makes it a control. `MaskLayer::refine` is shaping, like the feather, and it lives on the layer for the layer's reason: two layers may sit on the same category and want different amounts of it, and the model ran once for both. ## What the segmentation now stores `CategorySummary` keeps the **coarse** mask and the `Refinement` beside it, rather than a refined mask. That is what gives the control an off position that is bit-for-bit the model's own weighting, and what stops a strictness change from needing the model again. `category_mask_at` borrows at zero and wherever no refinement could be fitted, so a layer nobody has touched costs nothing over the old path. The fit moved to the far side of the orientation permutation. The verdict is a per-pixel field over the same grid as the mask it gates, so fitting it upright would mean permuting a proxy-sized buffer afterwards to match — a second rotation, and a second chance to get one wrong. One logit cell is the same number of pixels either way: the letterbox scales by the longer edge and a permutation does not change which edge that is. The two frames became a `Frames` struct rather than six parameters. This function reads the picture twice for opposite purposes — the model needs it upright or it recognises far less, the refinement needs the sensor's grid — and a transposed pair produces a plausible mask over slightly the wrong pixels, which is the failure this module is most prone to. ## It rebuilds the field, and the signature says so `refine` is mixed into `subject_signature`. Unlike a feather, which is read off a field that is already correct, this changes which pixels are in the mask at all — so it changes the coverage the field is measured from. Omitting it is the bug where the slider moves and nothing happens until some unrelated control invalidates the cache. That puts it in the same cost class as a close or an open, which is why the row takes `SliderRow::changed` — already once-per-gesture, since that row takes `SliderTrack`'s `committed` internally — rather than a live stream. The slider is offered only where there is something to move: a category source, *and* a refinement the frame actually gave enough to fit. A control that moves and does nothing is worse than an absent one. ## Two defaults that are deliberately different A layer added from the panel starts at 4.0, because a category's edges are twenty proxy pixels wide before anything is done to them and a photographer adding a sky mask wants the sky rather than the sky plus every chimney in it. A layer read from a sidecar with no `refine` key starts at **zero**. A file written before this control existed has to render as it did then, and a default of 4 on absence would quietly re-grade every stored category mask in the catalogue. `a_categorys_refine_strictness_survives_and_defaults_off` holds both halves, and `an_out_of_range_refine_is_clamped` holds the file to the scale — past the top of it every colour fails and the mask deletes itself, which reads as lost work rather than as a bad file. `MAX_REFINE` is dr-pipeline's own constant mirroring `dr_segment::STRICTNESS_MAX`, following `Falloff` and `Morphology`: this crate holds the description of an edit and must not depend on the crate that runs a model. dr-ui is where the two meet, and the only place that converts. Verified: fmt clean, clippy --workspace -D warnings clean, 488 dr-pipeline and 60 dr-segment tests. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
d7a81375ee |
List the steps, and let a photographer step straight to one
Build and test / Desktop (Linux) (push) Successful in 19m30s
Build and test / Layer separation (push) Successful in 25s
🐳 Android image / Build and push (push) Successful in 1s
Build and test / android-image (push) Successful in 1s
Traceability / Requirement traces (push) Successful in 23s
Build and test / Android (aarch64) (push) Failing after 33m5s
Undo answers "take back the last thing", which is the question asked about a mistake just noticed. It is the wrong instrument for one noticed six adjustments later: eight presses, each changing the picture, with no way to see how far back the mistake is without passing through it. A step is a whole state, so arriving from six away costs what arriving from one does — which is what makes a row worth making clickable rather than decorative. `Edit::Discrete` had to go for the list to be worth drawing. Seventeen call sites recorded the same anonymous step, which is fine for deciding whether two changes are one gesture and useless for a panel: seventeen rows reading "Discrete" is not a history. Every variant now carries enough to name itself, and the compiler enumerated the sites that had to start saying so. A step that moved a parameter is still named out of the descriptor, so an operation added as a YAML declaration appears in the history correctly named with nothing written for it (FR-DEV-3c). Choosing a film stock was not undoable at all. The pick went straight to `choose_film`, which nothing on the history's path ever sees. `pick_film` records it, and is separate because the same call is also how a *restored* edit gets its tables back — recording that would push a step for the undo the photographer had just asked for. The list is rebuilt off a revision rather than off every redraw. A drag ends in a redraw per frame while folding into one step, so the unconditional version would tear down and recreate every row sixty times a second to arrive back at the list already on screen. The counter is process-wide: a per-instance one starts every photograph at the same number, so a frontend holding "the revision I last drew" would keep the previous image's steps on screen — invisible while every image opens with one identical row, and a wrong-photograph bug the moment persisted history means it does not. The step names that no descriptor can supply are constants with a roll, and a test walks the roll rather than a second copy of it. `resolve` splits so that "is this catalogued?" can be asked: `derive` turns `history.mask_toggled` into "Mask Toggled", which names a field rather than an act and, being perfectly readable, is a mistake nobody would look at twice. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolle
|
f78c8b6959 | Sync with integration | ||
|
dtourolle
|
8ea427de3c |
WIP: capture sharpening
Checkpoint committed by the coordinator, not by the authoring agent: the session hit its API limit mid-task and left this work uncommitted. Committed so it survives, NOT because it is finished - expect failing tests and half-applied changes. The agent resumes from here. |
||
|
dtourolleandClaude Opus 5
|
13d003b89d |
Let the curve widget plot whichever curve is asked for
An operation with four curves and a panel that draws one plot needs a way to say which. The panel finds out the way it finds out everything else: the points are faceted with the subject they act on, consecutive parameters sharing a subject are one curve, and a widget spanning several of them gets a selector over their names. Nothing in ui/ contains the word "red", and an operation that grows a fifth curve arrives with a fifth chip. The names ride on the panel rather than on the curve's row, because a Slint model is compared by identity: a fresh list built on every parameter event would make the row look changed every time, and rewriting a row rebuilds the element holding the drag in progress. That is the hazard the in-place point update already exists to avoid. Which curve is on show is interface state, not an edit. It changes no pixel, so it takes no history step, reaches no sidecar, and redraws nothing — the photograph on screen is already right. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolle
|
924a837389 |
Group the panel by what operations say they are about
A strip of groups over the adjust panel — Light, Colour, Detail — derived from the attributes the operations declare. `adjust.slint` names none of them: the strings arrive resolved and the panel only draws them, so a new operation joins the right group by saying what it is and this file does not change (FR-DEV-3a). A group nothing carries is not offered, so a tab never opens onto nothing. Geometry is left out because its one operation prefers an on-canvas widget and is skipped by the row builder — a Geometry tab would be empty while `GeometryPanel` holds the real controls. The strip appears only when there is more than one group to choose between; a single tab is a control with one option. The selected group is underlined rather than filled. The accent means *modified* everywhere else in this interface, and spending it on "which tab" would blunt the one signal the panel has. **The trap, and it nearly bit again.** `op_index` on a row counts over every capability, not over the ones a filter kept — it is how a row routes back to the core. Renumbering it while filtering would make a slider drive a different operation, which looks like a rendering fault rather than a routing one. `rows_filtered` keeps `enumerate` over the full list and only `group_head` is a position within the emitted rows; a test moves a value through a filtered row and checks it lands where it was asked to. Six tests, including that a nonsense index falls back to showing everything rather than to showing nothing. |
||
|
dtourolleandClaude Opus 5
|
9b2ee0d0eb |
Show the colour mixer as three runs of twelve, each row a colour
Build and test / Desktop (Linux) (push) Successful in 17m20s
Build and test / Layer separation (push) Successful in 33s
🐳 Android image / Build and push (push) Successful in 2s
Build and test / android-image (push) Successful in 2s
Traceability / Requirement traces (push) Failing after 26s
Build and test / Android (aarch64) (push) Failing after 8m59s
The mixer was thirty-six sliders reading "Hue / Sat / Lum" twelve times over with nothing saying which band any row belonged to. The identity was there all along — the descriptor declares param.mixer.orange.sat and BANDS carries orange at 30° — and was discarded on the way out: labels.rs had no mixer entries, so every key fell through to a derived label that yields the bare channel name. A parameter can now say which aspect it adjusts and which subject it adjusts it on, with the subject's hue where the subject is a colour (descriptor::Facet). That is data about what the operation does, not a layout: the mixer genuinely weights pixels around 30°. What to draw from 30°, and in what order to stack the runs, stay in dr-ui (ARCH §4.3a) — develop.rs brings rows sharing an aspect together and marks the first of each, and adjust.slint names the run once and draws a swatch, a track and a readout on one line. Grouped by channel rather than by band because an edit is almost never "everything about orange"; it is the saturation of the greens, made by comparing one channel across neighbouring bands. Twelve band sections put those twelve rows in twelve different places. The swatch is the label, which is what makes twelve rows fit where four did. The band name is not lost: it is the row's accessible label, so the control is not colour-only, and labels.rs is where the mapping is written down — including chartreuse as "Yellow-Green" and spring as "Blue-Green", since nobody hunting foliage scans a list for "Spring". Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolle
|
09e3043f4c |
Add secure credential storage, sessions, and a launch screen
Login now persists properly rather than through the JSON file the test
harness was using.
dr-plat SecretStore trait plus a Secret Service backend.
Verified against the live GNOME Keyring: store,
retrieve, delete, confirm-gone all round-trip.
Session/SessionStore splits credentials from settings — the app
password goes to the keyring (FR-NC-2), while
server, login, chosen root and format selection are
ordinary config. A test asserts the credential never
appears in the config file.
LaunchModel the launch-screen state machine, testable without a
display server: sign in, approve in browser, choose
folder, tick formats, sign out.
launch.slint the screen itself, in its own file.
Absence of a secrets daemon is an explicit degraded mode, not a silent
fallback to plaintext — the screen says sign-in will not persist rather
than letting the user find out next launch. Android's Keystore backend
fails loudly for the same reason: a no-op store would look like it
worked and then lose the credential.
Two bugs caught by tests rather than by running it:
- fail() after busy() signed the user out, because busy() had already
discarded the session. A failed *scan* would have logged you out.
Busy now carries the session.
- normalise_server upgrades http:// to https:// rather than accepting
it. NFR-SEC-3 requires TLS, and silently sending a credential in the
clear is not a decision to make on the user's behalf.
launch.slint is not yet wired into app.slint. Calling slint_build::compile
twice replaces the generated module rather than adding to it, which broke
the other in-flight work on dr-ui; I reverted that immediately. Wiring it
needs an import inside app.slint, which is that work's file to change.
419 tests passing across ten crates.
|
||
|
dtourolleandClaude Opus 5
|
78e3e6b846 |
Add the develop pipeline: demosaic and seven raw adjustments
Decode through display, on the GPU: black/white normalisation, Bayer demosaic, camera colour transform, and the first seven adjustment operations — white balance, exposure, highlights/shadows, blacks/whites, brilliance, vibrance, saturation. Composable shaders. Each operation contributes a WGSL fragment rather than owning a pass, and dr-pipeline fuses the *active* ones into a single compute shader. One texture read and one write per frame regardless of how many adjustments are in play, while the operations stay independent in Rust — adding one is a new file, with no central shader to edit. An operation at neutral settings contributes no code, no uniform and no branch. Uniforms are prefixed per operation so two may both declare `amount`; helpers dedupe by name from a single source of truth. Pipelines cache on a structure hash covering the op-set and its order but not the values, so dragging a slider uploads uniforms and reuses the compiled pipeline. Measured on a 24 MP CR2: 0.60 ms re-render, one pipeline compiled across ten slider positions. The UI is generated, not written. EditGraph::capabilities() reports parameters with their kinds, ranges, defaults and current values; the panel builds one control per entry chosen by ParamKind. No file in ui/ names an operation, and dr-pipeline has no wgpu dependency, so codegen is testable without a device (ARCH §6.5a). Three defects found against real files, each silent: - rawler 0.7.2's `xyz_to_cam` is all zeros — deprecated and no longer populated. The live matrices are in `color_matrix`, keyed by illuminant. Reading the old field yields no colour transform at all. - `cam_to_xyz_normalized()` returns all NaN on any Bayer sensor: it divides each of four rows by its own sum, and the unused fourth (emerald) row sums to zero. Inverting the 3x3 ourselves avoids it. `wb_coeffs[3]` is NaN for the same reason and is normalised at decode. - As-shot white balance reached the uniform block but no shader read it, so the first render of a real CR2 came out violently green. Green photosites collect roughly twice the signal of red and blue. Now applied unconditionally before any operation, with tests on ordering. Demosaic is Malvar-He-Cutler rather than bilinear: gradient-corrected interpolation at one 5x5 neighbourhood per pixel, where bilinear leaves visible zippering on any high-contrast edge at 1:1. Two of the four packed CFA constants were wrong on the first attempt, so all four layouts are asserted to reconstruct the same colour. Crop origins at odd coordinates re-phase the pattern; without that, red and blue swap. X-Trans reports GpuError::UnsupportedCfa rather than approximating with the Bayer path, which would look like a corrupt file. 206 tests, including GPU tests proving every operation and the full seven-operation chain generate compilable WGSL. Known gaps: the display path still reads back to the CPU each frame, which ARCH §6.1 forbids and AC-8 asserts against — it is gated behind the `readback` feature and waits on spike S1 wiring Slint's texture import. Curve shapes are a first draft and want tuning against real photographs. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |