65 Commits

Include renames

Author	SHA1	Message	Date
dtourolleandClaude Opus 5	baa8957e80	Let a photographer choose the film, and remember which one ... The stock model rendered correctly and nothing could ask for it. This is the picker, and the sidecar key that makes the choice outlive the session. How the choice persists was the open question, and the answer was already written down twice in sidecar.rs: `rating` is a top-level key "because a rating is not an edit", and `masks` are one "because a layer is not a scalar". A stock is that kind of thing -- a choice of material, not a number a slider moves -- so it is a top-level key too. It stores the **id**, not an index. Stocks are files that users add, so an index would mean installing a profile silently changed which film every existing photograph had been developed on. A name this build has no profile for still round-trips untouched, because the alternative is that syncing to an older phone quietly un-develops the picture. Only the names travel. Turning one back into tables needs the profile database, which dr-pipeline deliberately does not link, so `Version::apply` clears the film and the session re-bakes -- after the parameters, because the bake reads the film's own exposure sliders and the print balance is solved against them. That is also why moving those sliders rebuilds the lookup where no other control in the panel does: an enlarger's filtration depends on how the negative was exposed. The panel keeps its rule. It still names no operation and still generates every control from a declared parameter kind; the stock gets a bespoke control beside those, exactly as the mask stack does, and for the same reason. The film's exposure and print exposure arrive as ordinary generated sliders. Two defaults worth stating. Picking a colour negative prints it, because an unprinted one is an orange strip and offering that as the first thing somebody sees after choosing Portra reads as a bug rather than as a choice -- the toggle is there for anyone who wants the scan. And a paste carries no film: a preset is a parameter map, and a stock is not a parameter, so pasting one would paste a choice the clipboard never took. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-25 19:57:41 +02:00
dtourolleandClaude Opus 5	7c8e433911	Load the window around the whole view, not around its first cell ... The bottom row of the grid was often blank, at a scroll position the user could sit at indefinitely. Two numbers decided when the loaded window follows the view, they lived in different languages, and they disagreed. The grid loaded three screenfuls and Rust held the window still until the first visible cell was three quarters of the way through them. Three quarters of three screenfuls is 2.25, and the view itself is one screenful tall — so the bottom of the screen had already travelled a quarter of a screenful past the last loaded cell before anything moved. Those rows are not in the model, so nothing is drawn for them. The same margin was wrong upward, and exactly so. The window is placed a quarter of itself behind the view, and the margin then declared the view too close to the top at precisely that distance: every single row scrolled upward re-read the catalog, rebuilt all 360 cells and re-queried their badges and ratings, and so did the row after it. So the grid now reports what it shows — a screenful, counting the row the scroll position has cut in half, which `visible-rows` alone undercounts and which is exactly the row reported missing — and Rust owns the rest: four screenfuls loaded, placed a quarter back, and moved once the view comes within half a screenful of an edge of them. One decision in one place, and the test now walks the view the length of the library and asserts the window covers it at every step. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-24 19:48:58 +02:00
dtourolleandClaude Opus 5	fa4ad6e2d6	Drag the date range on the axis it is chosen from ... The range could be turned on with a finger and not aimed with one. Its two ends were typed as `YYYY-MM-DD` into 108px fields behind a soft keyboard, to name days already drawn on the axis a thumb away; and the chip that seeds them takes its span from the timeline's zoom and pan, which are a wheel and a middle button. A touch screen has neither, so on Android the filter was a switch with no aim. The band is now on the timeline. Two ends with grips, dragged along the bars, released to filter — the histogram was already how a period is found, and this makes it how a period is stated. Both ends snap to whole days, which is what the typed fields mean, what `show_range` reads back out, and a floor under a range dragged shut. The fields stay for what dragging cannot do: name an exact day, and say in words what the range is. For that to work the axis had to stop following the range. Redrawn to the band, it moved the ground under the very handles doing the narrowing, and there was nothing outside the range left to widen back into. While there: a fixed number of equal bins instead of calendar buckets. Between one calendar unit and the next the bar count is free to wander by a factor of twelve, so zooming in halved it two steps out of three — the same picture drawn wider until it jumped back to fine. Equal bins also include the empty ones, so a bar's position on the track and the date under it are finally the same quantity; before, a library with gaps drew a February six months wide and the marker, the band and a click all pointed somewhere else. The count is a setting, 32 or 64, because the right answer is a question about the screen. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-23 18:42:42 +02:00
dtourolleandClaude Opus 5	b0b6dd559a	Show what is selected, and let a collection be made of it ... Three things a selection needed and did not have. **Seeing it.** The count existed — "12 selected" — in the header row, which scrolls sideways. On a tablet it sat past the right-hand edge along with every button beside it, so a selection was something you could make and then not see. A selection you cannot see is one you act on by accident. **Putting it down.** The only way to clear one was "Done", which also leaves select mode — so after filing forty photographs the next forty began by re-entering a mode the user had not meant to leave. Clearing is now its own action and keeps the mode. **Filing it somewhere new.** Making a collection of a selection took four steps: create one, find it in the tree, select the photographs again because creating it changed the scope, then add them. It is one press, which is how a selection is usually meant — it is gathered *because* it is going somewhere. The new collection is created at the top level rather than inside the current scope, unlike the tree's "+". A selection can be gathered from anywhere, including across collections, so filing it under whichever one happens to be open would put it somewhere its contents did not come from. It opens straight into its name field, for the reason `collection_new` already does: the placeholder name is nobody's choice, and making the user find the rename afterwards is asking them to finish a job we started. All of it on its own strip beside the date range's, appearing only while there is a selection — the third control this session that was invisible for being put in a row that scrolls. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-23 17:57:35 +02:00
dtourolleandClaude Sonnet 5	b3641b5307	Let a subject's mask be refined, and let several masks be edited at once ... Two related gaps in the mask panel, from the same conversation: a subject's outline is only ever as sharp as the whole-frame pass that found it, and a change meant for several layers had to be dragged once per layer. ## Refine mask A "Refine mask" button on a subject layer re-runs detection on a padded crop around that instance's own box instead of the whole frame — the subject reaches the model at its own size rather than squeezed into the model's fixed 640x640 window alongside everything else in the photograph. `RefineJob` mirrors `SegmentationJob`'s split (built on the session, run off it, adopted back), and the crop itself is rendered through `Framing::set_view` — the same ephemeral viewport the interactive zoom already uses to render a region above proxy resolution, so no new render path and no change to the model's own input size was needed. `dr-segment` is untouched: `Tiling::Whole` already treats whatever buffer it is handed as the one window. The result is still downsampled onto the shared proxy grid every instance's mask lives on, but from a sharper source than the whole-frame pass ever saw for that subject, which is what the edge actually reads out of. ## Multi-select `active_mask: Option<String>` is now `active_masks: Vec<String>`. A plain click still replaces the selection; a control- or command-click toggles one layer in or out of it. `set_param` and `reset_op` fan out to every selected layer, each set to the exact value the slider now shows rather than offset by however far it already was — one slider, one reading, applied everywhere selected. Dragging a gradient's on-canvas handle is deliberately not extended to multi-select: several gradients have no single geometry a shared handle could move, so `gradient_handles` stays empty unless exactly one layer is selected. Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>	2026-08-23 13:17:07 +02:00
dtourolleandClaude Opus 5	4b7648082e	Let a date range be stated, and draw the axis at the scale it deserves ... "Limit to range" did nothing, and the reason was not visible from the button. It took its span from the timeline's zoom, which is zero until someone zooms — so `zoomed_span` returned the whole library and the filter narrowed to everything. The chip lit up and the grid did not change. The range has ends now, shown and typed as `YYYY-MM-DD`. Seeding them from the timeline is kept, because zooming to a fortnight and pressing the chip is the fast path; the fields say which fortnight it landed on and let it be corrected. Ends given backwards are swapped rather than refused — there is exactly one range between two days — and the closing day is included, since "to the 5th" means the whole of the 5th and a range ending at its midnight contains none of it. `parse_date` refuses anything that is not a date rather than guessing at an order, because the alternative is a library silently filtered to a span nobody asked for. The axis then follows the range. It used to keep drawing the full extent while a range was on, because it was the only way back out; the typed ends are the way back out now, so it is free to show what was asked about. And bucket size is chosen by how many bars it makes rather than by fixed cut-offs. Each zoom step halves the span, so under thresholds the bar count halved with it until a boundary was crossed: fifteen years went 15 bars, 8, then 46, 23, 11, and finally 6. Zooming in made the picture coarser, which is the opposite of what zooming is for. Aiming at forty bars keeps the count in the same neighbourhood at every level, and the test asserts the property directly — halving a span never coarsens the bucket. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-23 12:40:14 +02:00
dtourolleandClaude Opus 5	a8969c149e	Move the instrumentation off the header and into About ... The render backend, the layout class and the frame rate sat permanently in a 44px strip that also carries the only way out of develop, the undo pair, the panel toggle and the export button. They cost about 200 logical pixels, and a `HorizontalLayout` given less width than its children's minimums does not shrink them — it runs off the end. There was already a breakpoint hiding them below 820px, which is why a tablet in portrait (768) looked fine and landscape (1200) did not: above the breakpoint the readouts came back and pushed the header off the right-hand edge. A breakpoint that hides a problem at one size and not another is a workaround, and this removes the reason for it rather than moving it. They are diagnostics — read once when something looks wrong, and then not again — so they are in Settings under ABOUT, beside the version, which is where someone goes when they have a bug to report rather than a photograph to edit. The version is there for the same reason and comes from `CARGO_PKG_VERSION`, so the line cannot disagree with the binary showing it. The frame rate keeps its warning hue. It is the number that says whether the zero-copy display path is holding up, which is the assumption the whole display design rests on, and that is worth colour wherever it is shown. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-23 11:41:17 +02:00
dtourolleandClaude Opus 5	7fcb8dc107	Give the develop column room, and the mask a way out of the way ... Three faults reported together, and they share a shape: each is something the panel decided on the photographer's behalf. **The column was 280px on every screen.** That width was chosen for a tablet, where the column is a large fraction of the display and every pixel of it is taken from the photograph. On a desktop window the mode strip alone — two modes, a separator, "All", and a chip per attribute the operation set declares — does not fit, so it scrolled sideways. A control you have to pan to reach is one you do not know is there. 380px when the window is classed expanded, 280px when it is not; driven off `layout-class` because reading the window width inside the layout that sets it is a binding loop. **The overlay could not be hidden.** An earlier "Overlay" button was removed for a good reason — it *armed* the overlay, so local mode could be entered and still show nothing. Hiding is the opposite need and was never served: a mask is judged against the photograph beneath it, and that photograph is exactly what the overlay covers. `overlay-hidden` is kept separate from `overlay-on` so a recompute cannot switch the overlay back on under someone who just turned it off. **The masks were coarse because the model saw the subject small.** The graph's input is a fixed 640x640 and every frame is letterboxed into it, so a bird 200px across in a 1600px proxy reaches the model at 80px. `Tiling::Grid` has been implemented and tested since the segmentation spike and defaulted off, because it costs one inference per tile — 2.8s for a 3x2 grid against 470ms. Now offered as "Look closer (slower)", which says what it costs, rather than spending it on every image or on none. The tiling choice enters the segmentation signature. A mask stores the signature its region ids index into, and a tiled run finds different instances in a different order; sharing a signature would silently reinterpret a layer built against the coarse pass — a wrong mask rather than a stale one, and nothing announces it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-23 10:54:35 +02:00
dtourolleandClaude Opus 5	d04087af83	Import into the library, which is on the server ... There was a local destination, defaulting to ~/Pictures, and an "upload" switch that could be turned off. That was wrong twice over. DarkRoom's library *is* a folder on a Nextcloud server (FR-NC-6) — there is no local library — so a user-chosen local destination built a second pile of photographs that no view in the application ever lists, and made "where did my import go" a question with two answers. An import now has exactly one destination and the page asks nothing about it. With no account there is nowhere to go at all, so Import is refused rather than quietly filling a folder. What lands on the device is a staging copy in a directory the app owns, the same shape `export` uses for its outbox and for the reason its module docs give: staging first is the only path, not a fallback for being offline. The bytes have to reach disk before the network — streaming a card straight to the server would let a move-import erase a card against an in-flight upload, and would make importing impossible with no connection (FR-NC-10). A staged file is removed once the server confirms it; one that is not confirmed stays queued, and the next import drains it. And the rule that was stated but never enforced: `retirable` was reported and `dr_ingest::retire` was never called by anything, so a move-import silently behaved as a copy. The card is now emptied by the worker, of exactly those photographs the *server* has confirmed — not those merely written here, because the staging copy is removed moments later and anything unconfirmed would then exist nowhere at all. FR-NC-7b said "copied locally first ... then queued for upload", which is a staging area; it has been rewritten to say so in terms that do not also permit what was built. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 21:09:26 +02:00
dtourolle	56dd3187f1	Merge integration into wip/ingest ... Second pass, against the detail-stage and thumbnail work that has landed since the first. Resolved and verified here rather than in the shared merge worktree, so what goes back is a fast-forward. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> # Conflicts: # docs/traceability.md	2026-08-22 19:44:42 +02:00
dtourolleandClaude Opus 5	28325af448	Make the thumbnails while the originals are still in hand ... An import read every byte of every original, uploaded them, and then left the grid to fetch a preview range back out of each one over the network — for files that had been on this machine minutes earlier. The pixels are now made from the bytes already in memory, on the fast path FR-CAT-3 names: locate the camera's own embedded JPEG, decode a few hundred KB, downscale, orient. Never a demosaic. A file with no usable preview yields none, which is not an error and simply leaves the grid to fetch one later. The filing waits for the upload, and only the filing. The shard store is keyed by `oc:fileid` (FR-NC-5) and that does not exist until the server has the file — so the thumbnail is made from the local copy and held until an id can be attached to it. One listing per folder supplies every id at once, rather than a PROPFIND per photograph over a link that may be mobile data. Best-effort throughout: a thumbnail that cannot be filed costs the grid one preview fetch later, and failing an import over it would be the wrong trade. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 19:20:13 +02:00
dtourolle	0d9910efc6	Merge branch 'worktree-agent-a89309a856c8f4947' into integration	2026-08-22 19:00:56 +02:00
dtourolle	21500b45be	Merge branch 'worktree-agent-abfe489c84c337e7c' into integration	2026-08-22 19:00:56 +02:00
dtourolleandClaude Opus 5	13d003b89d	Let the curve widget plot whichever curve is asked for ... An operation with four curves and a panel that draws one plot needs a way to say which. The panel finds out the way it finds out everything else: the points are faceted with the subject they act on, consecutive parameters sharing a subject are one curve, and a widget spanning several of them gets a selector over their names. Nothing in ui/ contains the word "red", and an operation that grows a fifth curve arrives with a fifth chip. The names ride on the panel rather than on the curve's row, because a Slint model is compared by identity: a fresh list built on every parameter event would make the row look changed every time, and rewriting a row rebuilds the element holding the drag in progress. That is the hazard the in-place point update already exists to avoid. Which curve is on show is interface state, not an edit. It changes no pixel, so it takes no history step, reaches no sidecar, and redraws nothing — the photograph on screen is already right. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 16:06:21 +02:00
dtourolleandClaude Opus 5	49be1fe354	Give the library somewhere to type a keyword ... A sheet over the grid, opened from the header beside "Add to collection" — deliberately the same card, scrim and dismissal as the filing sheet, because they are the same gesture applied to two kinds of label: pick the photographs, then say what they are. A user who has filed a selection already knows how this works. A word the whole selection carries, a word only some of it carries, and a word none of it carries are three visibly different marks. Half-applied shown as applied would be a lie about photographs the user cannot see from here, so a partial keyword draws a dash and says "3 of 12" beside it. Tapping a dash completes the keyword rather than removing it, which is what it means nine times in ten, and the tenth is one more tap away. The vocabulary is answered against the selection in Rust and pulled when the sheet opens rather than pushed on every selection change — the selection moves on each arrow key and the sheet is shut for almost all of them. Assign and unassign travel by name, so a word typed into the field and a word tapped in the list are one path rather than two, and the sheet never has to invent an identity for a keyword that does not exist yet. One gap, commented at the call site: unlike a star or a flag, a keyword is not queued to the image's sidecar, because the sidecar format has no field for one. So it reaches the user's other devices through the catalog merge, and a deleted catalog loses keywords where it would keep ratings. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 15:51:11 +02:00
dtourolleandClaude Opus 5	939f33a3a3	Say on the import page where the photographs end up ... Three lint findings and the gap the third one was pointing at. `Context::library_label` was dead: the page named the folder on this machine and said nothing at all about the server, which is half of what the Import button commits to and the half that takes minutes rather than seconds. It now names both, and states the order — copied and verified here first, then uploaded (FR-NC-7b) — beside the destinations rather than beside the button, because someone watching a slow upload needs to already know the photographs are safe on disk. The label is cached when the page opens rather than read in `render`: reaching it goes through the context closure to the account, and `render` runs on every keystroke. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 15:49:02 +02:00
dtourolle	1526c957cf	wip: ingest	2026-08-22 15:34:43 +02:00
dtourolleandClaude Opus 5	96a7b405c2	Say which photograph the sliders are pointed at ... Selecting a mask layer silently re-points about thirty controls at that layer's chain. Same panel, same order, same sliders, different meaning — and the only thing that said so was a sentence in the panel above, which a photographer reaching for the exposure slider has no reason to read. An exposure change lands on the whole frame when it was meant for a face, or the reverse; both are silent, and both are discovered later. `ui-navigation.md` §1.1 calls it the dangerous one and it is: the others in that document cost time, this one costs work. The remedy is the classic one for a modal fault — make the mode visible — and the application already had the pattern. Crop arms a canvas interaction, draws an overlay, gives the column one job and is left by the control that entered it. Local masking is the same animal built as a peer panel, and that is what created the ambiguity. So `crop-mode` stops being a bare boolean and becomes one value of a three-state mode, which is the point: two modes could both be on before, and now that is not a state the interface can be in rather than one it is tested against. **One strip, not two.** The mode control was going to sit beside the group strip that filters the adjustments, which is two controls above one column answering the same question — what am I working on. They are one control now, `Crop · Local │ All · Light · Colour`, which is the shape Lightroom Mobile's bottom strip has for the same reason. The two halves are different kinds of state and are drawn differently: a mode is a chip that fills with the accent when it is on, a group is a word with a rule under it. That difference is what lets both be read at once, which they routinely are — picking Light while a mask is selected filters *that layer's* chain and does not leave the mode. Dropping the scope on a group press would be the same fault coming back from the other end, and would make Light mean two things depending on where it was pressed. The strip stays pinned above the develop column rather than moving to the top of the canvas as the document proposed. The half that filters the column belongs to the column, and the photograph is the subject. The canvas keeps one button, which now names the mode it leaves rather than saying "Done" — that was unambiguous with one mode and would not be with two — because the column can be closed on a narrow window and no mode may be inescapable. Entering a mode is a side effect, so Rust owns it rather than the strip writing the property: crop drops the zoom, local turns the overlay on, and leaving clears the selection. That last one is the fix. The "Overlay" and "Select" toggles are gone because they armed things that are simply what the mode *is* — a mode that has to be switched on separately is one you can enter and have do nothing. Escape and the Android back gesture join `back_step` as one `LeaveMode` rather than a second exit concept, and the mode is left before the zoom is: it was entered later, and it is the bigger step back. The heading is where the scope goes. Not a caption beside the panel, the heading *of* the panel that changed — `ADJUST` becomes the layer's name, the same string the selected row in the stack shows. That is the difference between describing a hazard and removing it. **Handles on the photograph.** A linear or radial mask could be created and then not moved, so a radial sat at the centre of the frame at its default size for ever. Three faults stood in the way of drawing one. The first is that a gradient did not render at all until the model had run. The rasteriser was built on the way out of `segment` and the array's size was read *off* the segmentation, so a gradient added to an unsegmented photograph produced nothing — silently, in the same way exports and thumbnails once did: the shader still emits the layer's block and the empty placeholder multiplies it by zero. The proxy size is a property of the photograph. Both are derived from it now, and deliberately at the same size rather than by coincidence, because a subject's distance field is sampled against that array. The second is hit-testing. A handle is drawn in output coordinates and stored in source ones, and between them lie the crop, the zoom, the pan, the straightening and the turns. `Framing::source_at` is `wgsl_prologue` evaluated on the CPU, kept in that file beside it so that keeping the two in step is one file's problem — a handle mapped through anything less drifts off the mask the moment the view moves, which is exactly what masks are rasterised in source space to avoid. The third is that a drag is a displacement, not a destination. Each handle answers to the movement of the pointer since the press, applied to where the mask was when the press landed. Snapping the handle to the pointer instead jerks it by up to half a touch target on the first press, and the target is finger-sized because a tablet has no hover to reveal a control and no modifier to qualify it. A ramp gets three handles — centre, width, angle. An ellipse gets three too: centre and one per semi-axis, the major one carrying the direction as well as the length, because where an axis is put says both. It had a fourth, and it is gone: standing off the shape by a fixed distance, the rotation arm began outside the photograph at the size a new radial is created at, so the first thing anyone saw was a control they could not reach without first shrinking the mask. Two faults here were found by looking at the screen rather than at the source, both of the kind that cannot be found any other way. A `1px` rule with a size and no position is *centred* by Slint, so the seam between the photograph and the column was a hairline down the middle of the panel, through the histogram and every slider under it — twice, once in `app.slint` and once in `AdjustPanel`. And handing Slint a fresh model for the handles on every pointer event made the repeater rebuild its items, taking the `TouchArea` holding the gesture with them: the handle jumped once and then went dead under a finger that was still down. `develop.rs` carries the same warning about the parameter rows, where it broke slider drags; the model is rewritten in place now. The tests worth having are the ones about ambiguity and about the map. That the same row reads the frame's value, then the layer's, then the frame's again is §1.1 in one assertion. That dragging a handle onto another gradient's matching handle *produces* that gradient closes the loop between the two directions of the framing map, through a view that is cropped, zoomed, panned, straightened and quarter-turned at once — a one-legged map is invisible when the framing is neutral, because then both legs are the identity. Not done here: the histogram still reports the whole frame while the sliders edit a layer. That disagreement is real and is N3's, which this unblocks. The strip has room for a Brush entry beside Crop and Local when the painted masks land in the core, and it needs nothing here but the canvas interaction. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 13:20:41 +02:00
dtourolle	586698db00	Give the strip a layout to sit in ... The develop column's panel is a Rectangle, not a layout — a note four lines above explains why it is not an `if`. Two children of one therefore both sit at its origin, so pinning the strip beside the Flickable overlapped them and collapsed the whole develop view to a sliver. Wrapped in a VerticalLayout. The strip is pinned by being outside the Flickable rather than by any coordinate, which is what keeps it working at any column height. Caught by screenshotting the device rather than by the build, which was clean throughout — a Slint layout fault is invisible in the source and obvious the moment anyone looks.	2026-08-22 10:57:08 +02:00
dtourolle	9a7b045df4	Pin the group strip where it can be found ... It was inside AdjustPanel, which on a tablet put it below five other panels and off the bottom of the screen: present, working, and unreachable without scrolling past everything it exists to save you scrolling past. A control that answers "where is everything else" cannot itself be somewhere else. Now a GroupStrip above the scrolling column, so it never scrolls away. It still names no group — the strings arrive resolved from whatever the operations declared themselves to be about.	2026-08-22 10:46:35 +02:00
dtourolle	924a837389	Group the panel by what operations say they are about ... A strip of groups over the adjust panel — Light, Colour, Detail — derived from the attributes the operations declare. `adjust.slint` names none of them: the strings arrive resolved and the panel only draws them, so a new operation joins the right group by saying what it is and this file does not change (FR-DEV-3a). A group nothing carries is not offered, so a tab never opens onto nothing. Geometry is left out because its one operation prefers an on-canvas widget and is skipped by the row builder — a Geometry tab would be empty while `GeometryPanel` holds the real controls. The strip appears only when there is more than one group to choose between; a single tab is a control with one option. The selected group is underlined rather than filled. The accent means *modified* everywhere else in this interface, and spending it on "which tab" would blunt the one signal the panel has. **The trap, and it nearly bit again.** `op_index` on a row counts over every capability, not over the ones a filter kept — it is how a row routes back to the core. Renumbering it while filtering would make a slider drive a different operation, which looks like a rendering fault rather than a routing one. `rows_filtered` keeps `enumerate` over the full list and only `group_head` is a position within the emitted rows; a test moves a value through a filtered row and checks it lands where it was asked to. Six tests, including that a nonsense index falls back to showing everything rather than to showing nothing.	2026-08-22 10:22:47 +02:00
dtourolle	a881fa3693	Use transform-rotation, which is what Slint calls it now ... rotation-angle is deprecated in 1.17 and was the only warning the build still emitted.	2026-08-22 09:03:59 +02:00
dtourolle	e7dbdeb21f	Keep the overlay on the photograph when the view moves ... The overlay is a source-space picture; the canvas beside it shows whatever the crop, the zoom and the pan selected out of that same space. Drawn whole it stayed frame-sized while the photograph moved underneath, so zooming in left a map of the whole picture stretched over a detail of it. It now reports the visible rectangle as a clip, which the compositor applies for nothing. Resampling on the CPU instead would mean rebuilding a megapixel image on every frame of a drag, and putting it on the GPU would add a second texture to keep in step with the view. Pushed from the render path rather than the panel's sync: a pan changes no mask and no row, so nothing else needs to run, and rebuilding the row models on every frame of a drag would be waste. Straightening is handled by rotating the image. A quarter turn or a flip permutes the axes and a clip rectangle cannot say that — noted where it happens rather than left to be discovered. The proper fix is to run the overlay through the same shader prologue the photograph goes through, which is the right answer and a larger one than this. Four tests, and the one that matters asserts the clip *narrows* when zoomed — which is precisely what it failed to do.	2026-08-22 08:53:02 +02:00
dtourolle	37f63edbf9	Take the watershed out of the product path ... It does not work on a photograph, so nothing should offer it. `Segmentation` is now one model pass and what it recognised: no region field, no merge tree, no label upload, no granularity slider, and no readback of the whole proxy to build a graph that collapses. A click means "the object under the cursor". The region-selection path went with the hierarchy it indexed — including the shift-click add/subtract, which has no meaning for a whole object and would have been a modifier that silently did nothing. The passes, the hierarchy and the semantic prior stay in `dr-gpu` and `dr-segment`, tested and documented. It is the *merge criterion* that fails — the saddle is the minimum gradient along a boundary, so one weak pixel merges two regions and real gradient noise puts a weak pixel on every boundary. That is one function to replace, and the evidence for replacing it is worth keeping. What is gone is the wiring, the option, and the control that offered a user a choice with no outcome. `MaskSource::Regions` remains in the pipeline: it is tested, it round-trips through the sidecar, and a stored layer that names regions must still load and be reported stale rather than failing to parse.	2026-08-22 08:39:17 +02:00
dtourolle	6163b63895	Put the edge controls where the mask is ... Feather, falloff, grow/shrink/close/open and their amount, on the selected layer. All four read the one distance field, so all four are live — nothing recomputes except a compound morphology, and the session keys on that separately so a feather drag rebuilds nothing. Shown only for sources that go through the distance field. A gradient carries its own falloff in its geometry, and offering a second one would be two controls fighting over the same edge. Picking an operation seeds a small amount if none is set. Selecting "Grow" and seeing nothing happen would read as a broken control rather than as a radius of zero.	2026-08-22 08:39:17 +02:00
dtourolle	ee10097435	Mask the subject the model found, not the regions underneath it ... The watershed hierarchy does not survive a photograph, so local masking stops depending on it. A layer can now be one recognised object, and the object's own coverage is the mask. `Options::watershed` defaults off. It costs ~80 ms plus a full-resolution readback to produce a ladder that collapses, and paying that on every photograph buys a control that misleads. Kept switchable rather than deleted: the passes and the hierarchy are correct in themselves and it is the merge criterion that fails, which is a change to one function. Masks now rasterise in **source** space at proxy resolution and are sampled by the composed shader after the framing map. That fixes a real bug: they were rasterised in output space, so zooming slid the photograph underneath a mask that stayed pinned to the viewport, and cropping moved every adjustment to a different part of the picture. Doing it this way also leaves the framing map in exactly one place — a second copy in the mask shader would have been a second thing to keep in step, failing only when straightened. A subject is stored as identity, not pixels: the mask is megabytes and is reproducible by running the same model over the same image, so the sidecar carries the index, the class and the score, and the session carries the pixels. The class is there to be checked — if instance 3 comes back a "car" where it was a "dog", something changed and the layer is stale rather than silently masking the wrong thing. The overlay now draws instances and is transparent everywhere else. The region version covered every pixel and so hid the photograph it was drawn over; the question it exists to answer is whether an outline follows the subject, which you can only answer by seeing both. `examples/local.rs` is the worked example: subject in colour with the rest monochrome, and the subject lifted out of its background. Run on a 5472x3648 CR2 it finds two people and two cars, and the colour-pop keeps her hat and hair while the wall and grass behind go grey.	2026-08-22 08:39:17 +02:00
dtourolle	9b4f0815e5	Show the regions, click one, and adjust it ... The local panel sits above the adjust panel because it decides what those sliders act on; below it, a photographer would set an exposure and only then discover which scope it landed in. Selecting a layer re-scopes the existing controls to that layer's chain — there is no second set of sliders, and there must not be, or every operation added to `ops/` would need a local twin. The overlay is drawn over the canvas rather than blended into the render, because it is a diagnostic and not an edit: it must not reach the histogram, an export, or the texture handed to the compositor. Nearest- neighbour always — the map's values are *names*, so smoothing between region 4 and region 9 invents a colour belonging to neither and softens exactly the edge the overlay exists to show. Picking gets its own touch area above the pan handler. Panning wants press-drag-release and picking wants a click; interleaving them in one handler is how a drag ends up selecting a region the user was scrolling past. Shift is tracked as window state because a TouchArea's click carries no modifiers. Three states a layer can be in are worth distinguishing, and each has a different remedy: stale needs re-segmenting, "no adjustment yet" needs a slider moved, and the ordinary case needs nothing said. A bare selection renders nothing and looks identical to a broken mask, which is the first thing a new user will hit. Known rough edge, commented where it happens: segmentation blocks the UI thread for about half a second. Moving it to a worker needs the develop session — GPU resources behind a RefCell shared with every callback — to be reachable from another thread, which is a restructuring rather than a change to the call. The button says "Finding regions…" first so the stall is announced rather than looking like a hang.	2026-08-22 08:39:17 +02:00
dtourolle	3085ec4d2e	Leave the stars on screen on a touch device ... **Hover is not something a finger does, but Slint reports it anyway.** `has-hover` goes true for any pointer event carrying a position, a touch press included, and false again on the `Exit` that follows the release. So the rating strip did appear on a tablet — for exactly the length of a tap. It flashed on under the finger, vanished as it lifted, and the tap carried on through to the cell and opened the photograph. An unjudged frame could not be rated from the grid at all. The previous fix stopped the strip disappearing when a *pointer* moved onto it; this is the same symptom with a different cause, and hover was the wrong signal in the first place. The strip now stands open where the session is a touch one. That is seeded from the platform rather than inferred, because inference needs a press to reach a cell and a quick flick never delivers one — the Flickable claims the gesture before the delay it would forward after — and a control that only appears once the finger is down has appeared too late to aim at. The grid still latches on the first non-zero touch id it sees, which is what covers a touchscreen on the desktop. One-way on purpose: a tablet with a mouse plugged in keeps the strips once touched, which is the harmless direction to be wrong in. The alternative is chrome that comes and goes as the user changes hands.	2026-08-21 22:35:14 +02:00
dtourolle	2fba685e16	Make a pinch zoom the grid and nothing else ... Two faults left over from making the gesture reach the grid at all. **It still opened photographs.** Checking the finger id stops the synthetic release Slint emits when the *second* finger lands, but not the other end of the gesture: lifting one finger of two leaves the other one down, and Slint replays that survivor as a fresh `Pressed` on whatever is under it — which is how it hands the pointer back to ordinary handling. Under it is a cell. So the cell was selected, and lifting that last finger was a complete, well-formed click on the same finger that pressed. No part of the event stream distinguishes it from a real tap, so the grid now remembers that a pinch just happened: a latch raised when the gesture starts and lowered a beat after it ends, during which cells take neither presses nor clicks. The press that *opens* a pinch is undone rather than suppressed — it has already happened by the time a second finger makes it a pinch. Undoing it has to be exact, or a cancel that restored the selection but left the anchor moved would make the next shift-click select a run from a cell nobody pointed at, so capture and restore are a tested pair. **And it was not smooth.** Two reasons. The pinch was thresholded into ±1 steps of 25%, so the grid lurched and then sat still; it now takes the ratio since the last update and tracks the fingers, with the drawn cell still landing on whole column counts because the columns divide the width. And `zoom-cells` was the one geometry change still reloading inline — a full catalog re-read, 360-row model rebuild and thumbnail batch per step, on the thread drawing the frame. It goes through the same settle timer as the rest now.	2026-08-21 22:03:46 +02:00
dtourolle	6ae0af3f72	Swipe up in develop for the photo roll ... Develop opens one photograph. The grid handed over a path and nothing else, so `index` and `total` were pinned to "1 of 1" on the way in and the only route to the next frame was back to the library, find your place, tap again. Fine once; intolerable through a set of forty, which is the situation the develop view exists for. The roll is the grid's already-loaded window along the foot of the canvas. Swipe up to bring it out, swipe down to put it away — the sheet gesture, already in the hands of anyone who has used a phone — and a handle is drawn at the edge so the gesture is discoverable rather than folklore, and so a pointer, which has no swipe to make, has a way in. `SwipeGestureHandler` wraps the strip rather than sitting over or under it, which is what it is built for: it delays a press the way a Flickable does, forwards it to the children if no swipe develops and claims it once one does, so a tap reaches the thumbnail and a drag does not. It covers only the band along the bottom — above that, a drag still belongs to the photograph, for panning and for the crop. Picking goes through the same path a cell click does, so the outgoing edit is persisted before the next image loads. The strip marks what is open and scrolls to keep the mark in view. The position readout now says where in the *library* the open photograph sits rather than "1 of 1". Set after the open rather than before, since the generic open path resets it — and given as the library ordinal, not the row in the loaded window, which is an artefact of how much has been paged in and would jump about as the window moves.	2026-08-21 21:10:44 +02:00
dtourolle	c72f197880	Stop a row of buttons deciding how wide the grid is ... **A Slint layout cannot be narrower than its children's minimums.** Given less room than they need it lays them out at those minimums, lets the row run past the edge — and reports the oversized minimum upwards. That second half is what made this more than cosmetic. The header, the filter chips and the grid are siblings in one VerticalLayout, so the widest row's minimum became the whole view's minimum: `LibraryGrid` was laid out wider than the window. The grid then measured itself against that inflated box and sized its columns to fill space that was off the screen, so the right-hand column was cut by the edge no matter what the tiling arithmetic did. Fourteen filter chips do not fit across 768 logical pixels, so that was every tablet in portrait. It also explains why opening the collections sidebar did not reflow the grid. The view was already pinned at a minimum wider than the window, so taking 232px away for the sidebar could not shrink it — it just clipped more of it. Each of those rows is now a horizontal Flickable. A Flickable's own minimum is nothing, since it exists to be smaller than what it holds, so none of them can inflate anything — and the controls past the edge became reachable instead of merely absent. Applied to all four: the library header, the filter chips, the compact action row disclosed by "More", and the develop strip.	2026-08-21 21:00:49 +02:00
dtourolle	90d6e551b3	Give the develop strip room for its controls on a tablet ... The render backend, the layout class and the frame rate are developer readouts, and they were sitting in the middle of the one strip that also carries the way out of develop, the undo pair, the panel toggle and export. A HorizontalLayout given less width than its children's minimums does not shrink them — it runs off the end. A tablet in portrait is 768 logical pixels, which is not enough, so everything from the panel toggle rightwards was pushed off the right-hand edge. Below the breakpoint the develop column is *also* closed by default, so a toggle that could not be reached meant the column could not be opened at all — and copy and paste live in that column. That is the whole of "I have no idea how to copy a setting on Android and apply it to other images": there was no way to. The three readouts now collapse to zero width below the breakpoint. Width and not an `if`, because this strip is inside the layout that `expanded` feeds and a conditional child here is the shape that has already caused binding loops in this file — and because a `visible: false` child still takes its slot in a layout, so hiding alone would have freed nothing.	2026-08-21 20:38:48 +02:00
dtourolleandClaude Opus 5	3cfa78cde2	Give the app a face and a name on the launcher ... There was no icon anywhere, and on Android that was not a missing line in the manifest. `aapt2 link` was being handed a manifest and nothing else, so the APK carried no res/ and no resources.arsc — there was no table for an `@mipmap/...` reference to resolve against even if one had been written. Packaging now compiles the resource tree first and links the result in, which is the two steps aapt2 insists on: link reads compiled input only, never a directory. That absent table is also why the launcher caption was blank, which had looked like a second, separate bug. `android:label="DarkRoom"` was there and correct the whole time, and Settings' App info read it fine; the launcher could not, because resolving a label goes through the package's Resources and there were none to open. Nothing about the label changed here. It came back with the table under it. `android:icon` then names one drawable for both icon generations, because the `anydpi-v26` qualifier is what separates them. API 26 and up take the adaptive icon and its three layers; the third of those, monochrome, is what lets Android 13 recolour it rather than drop the app out of the themed set. Below 26 the same name lands on a density-matched PNG. `roundIcon` is deliberately absent — a launcher old enough to read it is one that would ignore the adaptive XML, and minSdk is 28. The desktop icon is one `@image-url` on the window, and the only raster asset in a UI that is otherwise entirely Path. The reasoning at the top of icons.slint does not reach it: that is about glyphs a font might not carry, and this image is never drawn by us at all. It goes to the window manager, which wants pixels and composites them unmasked, so it is pre-shaped with rounded corners rather than square the way the Android layers are. Which exposed Slint's resource default. An `@image-url` compiles down to the absolute path it had on the build machine, to be opened at runtime — already wrong for Android, where the build happens under /work inside a container and no such directory exists on the device, and wrong silently, as an image that loads empty. `EmbedFiles` puts the bytes in the binary instead. It reaches nothing else, since every glyph is a Path. Verified on a device: the APK installs and the home screen draws both the icon and "DarkRoom" under it, where before it had neither. In the link step the adaptive icon resolves at all six densities and resources.arsc lands uncompressed, which API 30 requires and the existing zipalign preserves. On the desktop by reading _NET_WM_ICON off the running window — 256x256, as handed over. Where that actually shows is narrower than it sounds, and the comment says so: Wayland ignores the property in favour of matching app_id against an installed .desktop file, which this repo does not install. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-21 20:25:22 +02:00
dtourolleandClaude Opus 5	6acc73a9fa	Drag a collection onto another to nest it ... The tree could be built nested but never rearranged: `set_parent` existed, with its cycle check and its tests, and nothing in the UI called it. A collection created in the wrong place stayed there. Each row is already a drop target, so it becomes a `DragArea` too — wrapped at the instantiation site the way the grid's cells are, which keeps the row's own TouchArea nested underneath and a click still selecting. `allow-move`, not copy: a collection has one parent, unlike a photograph, which is filed in as many collections as you like. The drop is handed only the target's id, so the source is remembered from the press that precedes the drag — Slint builds the payload through a `pure` binding, which must not have side effects. An image drag always fills `dragging`, so an empty payload with a remembered row is unambiguously a rearrangement; the row is taken rather than read, or a later empty drop would move a collection nobody touched. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 22:54:50 +02:00
dtourolleandClaude Opus 5	edcaf42ded	Show only the photographs taken in the period you are looking at ... The library could be narrowed by rating, flag and availability, but not by when a photograph was taken — so finding a fortnight meant scrolling to it and holding position. The range rides on `RatingFilter` for the reason `local_only` already does: every query path threads that one struct, so the count in the header cannot claim a total the grid does not draw. Undated images are excluded whenever either end is set — they cannot be inside or outside a span, and drawing them made the range look as though it had not applied. Taken from the timeline rather than typed into two date fields. Finding the period is what the histogram is for, and having found it the user should not have to read the dates off the axis and key them back in. The histogram keeps drawing the full extent while the range is on, or there would be nowhere to widen back out from. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 22:38:26 +02:00
dtourolleandClaude Opus 5	dea826811e	Render a blown highlight white instead of magenta ... Every clipped sky came out bright pink. Measured, not guessed: developing _MG_8596.CR2 and looking at the export, the subject renders correctly and only the saturated region is wrong. A fully clipped pixel reaches the shader as (1, 1, 1) — three photosites that stopped counting, carrying no colour at all. The as-shot multipliers are not neutral, so balancing sends it to (1.93, 1.00, 1.68) on this body, and the camera matrix turns that into R 2.88, G 0.51, B 2.03. Red and blue clip at one; green, whose matrix row is far less positive-heavy, does not. Red and blue high with green low is magenta. Nothing upstream was at fault, which is why the two previous attempts missed it: the white balance is correct, the matrix is correct, and the sensor normalisation is correct. The input simply was not a colour, and correct arithmetic on a non-colour produces a confident wrong answer. So saturation is detected before the balance is applied — the last 1.5% of range, smoothstepped rather than switched, because a hard threshold draws a visible rim around every highlight and a backlit edge on skin is where that shows. Above it the pixel is pulled to the neutral of its own brightness, so it keeps its luminance and loses only the cast. Verified end to end on the file itself: the sky is white, the skin, the black dresses and the stone are unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 13:17:15 +02:00
dtourolleandClaude Opus 5	d2024da368	Scroll the develop column as one, histogram and all ... Only the sliders scrolled. The capture metadata, the histogram, the geometry controls and copy-and-paste all sat above them in a fixed layout, so on a 280px column in portrait they took the height the sliders needed — and the histogram, which is the instrument the sliders are judged against, could neither be scrolled to nor scrolled past. The Flickable moves out of `AdjustPanel` and around the whole column. Nesting one inside the other was not an option: a slider drag already has to be won against one scroller, and a second would give it a third thing to be lost to. `slider-dragging` becomes an `out` property for the same reason. The arbitration is unchanged and still necessary — a track stands the scroller down as soon as a finger touches it, or every attempt to drag a slider would scroll the column instead — but the scroller obeying it now lives a level up. The scroll gutter stays where it is, as padding inside the content: it is what guarantees somewhere to put a thumb that means "scroll" and nothing else, and it matters more now that it serves the entire column. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 12:53:04 +02:00
dtourolle	4e62b89d17	Merge branch 'android-collections' ... Touch multi-selection in the grid, filing a selection into a collection without a drag, and taking a collection offline from a held row.	2026-08-17 12:27:49 +02:00
dtourolleandClaude Opus 5	d913e50948	Select photographs with a finger, and take a collection with you ... Two things a tablet could not do. Both existed for a pointer and had no touch form at all, which on Android meant the collection sidebar was somewhere to look at rather than somewhere to file into. **Selecting more than one.** Ctrl-click and shift-click are the only ways into a multi-selection, and touch has neither. Holding a cell now enters selection mode, where a tap toggles — reported to Rust as a ctrl-press, so it goes through the same `apply_press` as everything else rather than growing a second copy of the selection rules. A double tap takes the run between where selecting began and there: the touch form of shift-click, and the reason the anchor from *before* the double tap has to be remembered, since both of its taps move the anchor onto the cell being tapped. A "Select" button does the same thing where a gesture would go undiscovered (FR-UI-4). **Filing without a drag.** A one-finger drag beginning in the grid belongs to the Flickable that scrolls it — that is the arbitration working, not a bug to route around — so the selection can now be filed from a sheet listing the sidebar's own rows. Copy by default, as the drag has always been; moving out of the collection being shown is a switch, because it is the one that takes something away. **Taking a collection offline.** The machinery was there and reachable only by scoping the grid to a collection and finding a button behind a disclosure. Holding a collection's name now asks the question directly, and the tray on a row and the header button ask the same one — three affordances doing two different things is how a user comes to avoid all three. The question is asked rather than a toggle flipped because both answers are expensive: one downloads gigabytes, the other deletes them, and the counts and sizes go in the buttons where they are read before the tap. `Cache::release` is new and is the destructive half `unpin` deliberately is not. "Remove the local copies" is asked by someone whose device is full, and withdrawing a promise while leaving the bytes for a future eviction to notice is not an answer to it. It unpins before forgetting, or the next pin fetch would dutifully download everything it just deleted. The sidebar's trays read `tier_actual`, never `tier_desired`: the question is whether these will open on the aeroplane, and a pin whose download has not run yet answers no. TRACES: FR-CAT-7 | FR-NC-6a | FR-NC-6b | FR-NC-6c | FR-UI-2 | FR-UI-3 | FR-UI-4 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 12:27:29 +02:00
dtourolleandClaude Opus 5	44f0a4971b	Show the folder picker on the platform that needs it most, and upload at once ... Two faults, both of my own making, reported from the tablet as "I cannot select a location" and "it does not upload". **The picker button was gated on `target-selected == 1`.** That index was Remote's position while both targets were offered. Making the target list platform-aware narrowed Android's to Remote alone, so Remote became index 0 and the button disappeared — on the one platform where the picker is the *only* way to set a destination, since a device folder is not reachable there at all. It is gated on a boolean derived from the target now. An index into a list whose length varies is not a fact about the target, and writing it as one is what made a correct change break the thing it was meant to fix. **A queued export waited for a sync pass.** Staging first is deliberate — an export is finished on disk the moment it is written, and offline is then just a longer queue — but nothing drained the outbox until the next sync, so "Queued for Exports" sat unchanged and read, fairly, as an upload that never happened. A finished batch that wrote anything now drains immediately. The sync-pass drain stays: the first makes an upload feel immediate, the second is what eventually delivers the exports made in a tunnel. Committed without the parallel session's in-flight collection work, which is mid-save and does not compile; verified by stashing it and building this tree alone. 281 dr-ui tests pass, clippy clean. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 12:01:12 +02:00
dtourolleandClaude Opus 5	a8b28136a6	Merge the batch export, and settle the seven-branch merge ... Resolves the last of the parallel work. Two conflicts worth recording, because both were semantic rather than textual: `render_for_export` gained a colour space on master while the batch branch was rewriting the single-image export path around it. Kept both: the batch request supersedes the synchronous path, and the space still has to be chosen at render time because the conversion happens in the shader before the clip to 0..1. `render_open_frame` takes it as an argument rather than reaching for a controller it does not hold. The map-wait moved into `readback::await_mapping` on one branch while another was editing the constant it used, so `READBACK_POLL_LIMIT` survived the merge with no callers. Removed rather than left for clippy to find later. 1164 tests pass, clippy clean, fmt clean. Traceability 53.0% -> 54.3%. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 10:11:44 +02:00
dtourolle	9fc8721fa8	Merge branch 'histogram' ... # Conflicts: # ui/dr-ui/src/lib.rs	2026-08-17 10:00:27 +02:00
dtourolleandClaude Opus 5	7d3c8c521f	Export a whole selection, on a thread that is not the interface's ... The export button rendered, resampled and encoded a 24 MP frame on the UI thread and the window was dead for all of it. That was written down as a known compromise, on the grounds that a batch is what makes the wait intolerable rather than merely noticeable. This is the batch, so the compromise comes due. The grid's selection now exports (FR-EXP-7). A worker thread takes a clone of the `GpuContext` — an `Arc` pair over a device and a queue — and opens each photograph for itself: fetch, sidecar, decode, demosaic, render at full size, resample, sharpen, encode, write. Nothing of that touches the interface, which keeps drawing throughout, and the progress goes where every other background job's does: one row in the activity register, with a count and a bar. Why the worker does not borrow the session it could have had. A `DevelopSession` owns the `AdjustPass` the canvas renders from, so handing it to a worker would stop the develop view drawing for the length of the batch — the same freeze, moved. Opening a session per image instead costs a `Demosaicer` and an `AdjustPass` each time round, and the pipeline cache is per-pass so the composed shader is recompiled per image rather than once for the run. Against a full-resolution decode, render and encode that is a few percent, and it keeps this file out of the pipeline `develop` owns. A reusable export pass is the obvious next economy if a profile ever says so. The open image is the exception, and it is why the develop button is not simply a one-image batch. Its edit lives in the interface's session and may not have reached a sidecar yet, so a worker that re-opened the file would export the saved version rather than the one on screen. That frame is therefore rendered by the caller and handed over as `Source::Rendered`; everything after the render — the Lanczos reduction, the encode, the write, which is the larger half of the wait and all of its variance — still leaves the UI thread. So the develop export is no longer synchronous, but it is not fully off-thread either, and the doc comment says so rather than claiming otherwise. Cancellation (NFR-ARCH-3) is an `AtomicBool` read between stages, and the export button becomes the cancel button while a run is live — a batch that could only be stopped by not touching the selection would be a trap. Waits on another worker use `recv_timeout` rather than `recv`, so a cancelled batch sitting on a forty-megabyte download gives up within 100 ms instead of when the transfer finishes. The honest bound is worse than that: a frame already in render has no interior stopping point, so the worst case is one image. Closing that needs the render itself to become interruptible, which is NFR-ARCH-2's scheduler and not a finer poll here. Failures are per image and typed (NFR-ARCH-4). One unreadable body, one folder that cannot be written, one server that went away — each is a message on the channel, a line in the log, and a count in the summary, and the batch carries on. A run with any failure keeps its row until it is cleared, because that is the row somebody came to the list to find; a cancelled run does not, because they asked for it. Two collisions that look alike and are not. `CollisionPolicy` is the user's answer to "a file of this name was already there", and Overwrite is a fine answer to that. It is not an answer to "the frame I exported four seconds ago was also called this" — two folders in a library each holding an IMG_0001 is ordinary — so a name the run has already issued is always stepped past whatever the policy says about the folder. Both halves are held by tests. Supporting changes, each smaller than it sounds. `open_session` comes out of `load_bytes` so the worker shares the JPEG-versus-RAW routing rather than carrying a copy that would drift; the half that builds a `slint::Image` stays behind, where it belongs. `LibraryController::selected_image_paths` answers from the catalog rather than from the loaded window, because selection is by id and survives a scrub — a selection made before scrolling routinely names photographs no row holds. `cache_context_for` takes an id for the same reason, so a batch reads the originals cache instead of re-downloading three hundred files. `format_date` is shared so `{date}` and the timeline agree about what day a photograph was taken. Left undone, deliberately: the batch is sequential, where FR-EXP-7 asks for all available cores. Four full-resolution frames in flight is tens of megabytes each and a straightforward way to exhaust a tablet, and the GPU is shared with the interface in any case. Also undone: exporting with a chosen preset rather than the current export settings — that is FR-EXP-5's machinery, which does not exist yet. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 09:59:57 +02:00
dtourolleandClaude Opus 5	0233df4bf2	See what the highlights are doing: a live histogram (FR-DSP-7) ... Exposure, blacks and whites were set by eye. Nothing said a highlight had blown — the canvas shows white where a channel is at 250 and white where it is at 255, and the difference is the whole question. **Counted on the GPU, not on the readback.** There is a full frame sitting in CPU memory on every canvas update right now — `AdjustPass::read_output`, the bridge spike S1 removes — and walking it would have been thirty lines and no shader. FR-DSP-7 states the mechanism and not just the feature: "these derive from a GPU-side reduction into a small buffer. Per-frame CPU readback of image data is prohibited." A histogram founded on the bridge would be correct today and deleted by S1, and would meanwhile be the reason the bridge could not go. What crosses the bus here is 4104 bytes whatever the image size. The reduction tallies into workgroup memory first and merges once per workgroup. A photograph is not noise: a clear sky puts tens of thousands of adjacent pixels in one bin, and contending for that single global atomic serialises the dispatch. **On the settled frame only.** `render_now` already knows whether a gesture is still moving — `draft` is the flag `redraw` derives from `was_coalesced` — so the dispatch and its transfer happen once when the slider stops rather than on each of the forty frames a drag emits. Nothing is lost: a histogram flickering past under a finger is not a reading anyone takes. FR-DSP-7 requires exactly this, that it not extend the FR-DSP-3 frame budget. Luma is weighted in 8.8 fixed point — 54, 183, 19, summing to 256 exactly — rather than in floats. Not thrift: it makes the shader's arithmetic reproducible bit for bit, which is what lets the test below be an `assert_eq` against a CPU count rather than a tolerance. ARCH §6.13's line about integer state, applied where it happens to also be free. **What the numbers were checked against.** A flat frame must put all 4096 pixels in one bin and one only. A 256-wide ramp must occupy every level with exactly the same count, which is what catches an off-by-one in the quantisation — a `floor` where a rounding was needed shifts the whole photograph one bin left and looks like nothing at all. And a 101x37 frame of seeded pseudo-random pixels — deliberately not a multiple of the 16x16 workgroup, so the edge tiles run off the image — is compared slot for slot against a second, obvious CPU implementation. Exact equality, no tolerance. The CPU version is a deliberate reimplementation rather than shared code: the bugs worth catching here are ones shared code would commit identically on both sides. Above that, the presentation arithmetic is unit-tested headless, because it is where a wrong answer is invisible. A histogram of the wrong shape looks exactly as plausible as one of the right shape. So: 64 columns because it divides 256 and an uneven fold draws an even ramp as a comb; the peak excludes the end columns, or a night scene scaled against its own black spike is a flat line with no information in it; heights are clamped into the plot; and "0%" is kept distinct from "<0.1%" and from "—", since an indicator reading "clipped" over a figure reading "none" is a panel contradicting itself. Clipping counts a *pixel* with any channel at an extreme, not a channel. Any, because a blown red has no gradation left in it however much green and blue still hold — and it is the saturated highlight, the sunset and the red jersey, that clips first and recovers worst. Per pixel, because counting channels can report 200% of a frame clipped, and a percentage above 100 is a readout nobody trusts again. Two affordances for it, which NFR-A11Y-3 asks for: a bar standing at the end of the plot the tones are piling against, and a figure saying how much. Either alone reads. The panel sits directly under the capture metadata and above every control, because it is what the controls are judged against. It is hand-built rather than generated, and ARCH §4.3a is untroubled: a histogram is not an operation — no parameters, changes nothing, answers a question rather than asking one — and nothing in it reads a parameter out of a descriptor. Three plot colours and a neutral luma trace join the palette. That is the swatch's exception rather than a second one: a per-channel histogram has to say which channel, and no achromatic treatment distinguishes red from blue, so the hue is data exactly as the image beside it is. Held well back from full strength for the reason the theme preamble gives. The bounded, non-parking map wait moves out of `AdjustPass` into `readback::await_mapping`, shared with the histogram's transfer. Thirty lines of load-bearing reasoning about frozen interfaces and lost devices, and two copies of it would have drifted. The histogram describes the frame on the canvas, so it is in the output colour space FR-DSP-7 asks for, and when zoomed it describes the visible region — a photographer inspecting a highlight at 4x is asking about that highlight. A device that cannot build the reduction loses the histogram and keeps the photograph. Still to do for FR-DSP-7: the pixel colour readout under the cursor. 324 tests pass, clippy and fmt clean. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 09:55:40 +02:00
dtourolleandClaude Opus 5	7f524d2fd0	Give a mis-drag a way back ... Develop edits now save themselves to a sidecar the moment you leave the image, so until this there was no way to undo one — the mistake was persisted and the only recourse was to remember the old number. The history is a stack of snapshots, because the edit graph is already plain data: `Preset::capture` reduces it to what differs from default and `Preset::apply` puts it back, so undo is those two calls and nothing else. A command object per action, with an inverse beside it, would have been a second thing every operation had to register — and operations are declared in YAML precisely so that a new one needs no code written for it. A snapshot cannot fall behind them. The interesting part is coalescing. A slider drag emits an event per frame and must be one step, not forty. Nothing in the interface reports a gesture boundary — the same wall the render coalescing hit, and it is answered the same way rather than by threading a "finger is down" out of every slider, curve point and crop handle. What stands in for the boundary is the control plus recency: changes to the same control within 700 ms amend one step. Which control is "the same" is asked of the graph, not listed: an operation whose declared presentation claims a parameter is one where a single gesture moves several — a curve point carries an x and a y — so those coalesce as one widget. Nothing in the history names the tone curve. The compromise, and it is a real one: a control let go of and picked up again within the window is one step rather than two. Buying the other answer costs a gesture-boundary signal on every control, which is more surface than the difference is worth. The stack is bounded at 64 states for NFR-RES-1 — a develop session stays open for hours. Sixty-four rather than a byte cap: what is being bounded is steps a photographer would want back, and a byte cap would give the elaborate edit the shallowest history, which is exactly backwards. The session owns its history and every mutator records into it, so the callbacks in `lib.rs` cannot change the edit and forget to — with a dozen generic callbacks that would have been one press of undo away from wrong every time a control was added. Opening a photograph makes its stored edit the floor rather than a step: it is not work done in this sitting, and an undo reaching behind it would discard a previous session's edit and then save that on the way out. Not yet done, from FR-DEV-5: history is per-session and in memory, and there are no named snapshots. What mattered was that a saved mis-drag had no way back at all. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 09:03:34 +02:00
dtourolleandClaude Opus 5	cb1d2be240	Choose the export folder by walking the server, not by typing it ... The destination for a Nextcloud export was a text field. Nobody recalls the exact spelling of a path three levels down, and getting it wrong does not fail — `create_dir` makes whatever was typed, so a misremembered folder becomes a new one at the root and the exports are somewhere nobody looks. So it is picked the way the library root is picked, using the same `FolderBrowser` model the launch screen drives: up, into, and "use this folder", confirming the folder currently *shown* rather than one selected in the list. Same rule in both places, so the phrase means one thing. The model is shared; the worker is not. `settings_ui::spawn_folder_list` is a near-twin of the launch screen's, because that one reaches into the `LaunchController` for its session and reports onto the launch screen's error line, while this one is handed credentials and writes to the settings page. Factoring them together needs a function taking both controllers or a trait implemented twice to abstract two call sites — more machinery than the twenty lines it saves. What matters is shared already: navigation behaves identically because both drive the same model. The callbacks are wired in `lib.rs` rather than in `settings_ui::wire`, because listing a remote folder needs credentials and the settings page holds no session on purpose — it is reachable before a library is opened and must not depend on one existing. With no account the picker says to sign in first, rather than showing an empty list that reads as a server with no folders. Details that are decisions rather than accidents: the picker opens at the library root rather than at whatever half-typed path is in the field, which would list nothing and look broken. The listing area is a fixed 180px, since a folder with sixty children would otherwise push the rest of the settings page off the bottom. "Up" is disabled at the root rather than hidden, so the row does not jump as the user navigates. A failed listing leaves the picker open on the folder it was showing — where the user had got to is not something to discard over a dropped request. And the chosen folder saves immediately like every other setting on a page that has no Save button. The poll timer lives on the controller for the reason `LaunchController` keeps its own there: a `slint::Timer` stops when dropped, so one local to the function that starts it would be collected before the listing arrived. Carries in-flight work from a parallel session — a segmentation pass in dr-gpu, a sidecar cache, and the develop panel's continuing changes. 1020 tests pass, fmt clean. One clippy warning remains and is not mine: `sidecar_cache::dir` is unused while that work is in progress. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 07:12:01 +02:00
dtourolleandClaude Opus 5	e00c99b864	Let a photograph leave: an export button, and a cache to leave from ... dr-export could turn a frame into bytes and nothing could ask it to. This is the button, and the place the bytes go. **Everything is staged first.** An export bound for the server is written to a local outbox and uploaded afterwards; offline is not a special case, it is the same path with a drain that finds the server absent. Doing it the other way — upload directly, stage only on failure — makes the failure path the one that is rarely exercised and always broken, and a network drop mid-batch leaves some exports existing and some not with nothing recording which. Staged first, an export is finished the moment it is written and the upload is a promise kept later. The outbox sits beside the catalog rather than under the cache. dr_catalog's cache already draws that line: passive entries are a convenience and go under LRU, pinned ones are a promise and never do. An export awaiting upload is a promise — the user was told it succeeded — and sweeping it for disk would destroy the only copy. Bytes are written before the destination record, so a kill between the two leaves an orphan the drain ignores rather than a record pointing at nothing. The status line says "Queued for Exports/2026", never "Exported to Nextcloud", until it has actually landed. There is a test asserting that wording, because the tempting shorter sentence is a claim the app cannot keep. The drain runs on the sync pass, before the shards: a thumbnail shard can be rebuilt from the originals and the catalog is an index, but a queued export exists nowhere else. `DevelopSession::render_for_export` renders the framed size rather than reusing the frame on screen, which is deliberately viewport-sized (FR-DSP-1) — encoding that would hand the user a soft, screen-sized file with nothing to say anything had been lost (FR-EXP-9). One compromise, recorded rather than hidden: the export runs synchronously on the UI thread, so the window is unresponsive for the few hundred milliseconds a full-resolution render and encode takes. Moving a DevelopSession and its GPU pass to a worker is a larger change than one button earns, and it is batch export that makes the wait intolerable rather than merely noticeable. Still missing: the Nextcloud folder *picker*. The destination is typed into Settings for now. `FolderBrowser` in launch.rs is already the reusable model for it — it browses a remote tree and nothing about it is specific to choosing a library root — but wiring it into the settings page needs a listing worker and browser UI there, which is its own piece of work. Carries in-flight work from a parallel session — presets, the develop copy and paste, and the node schema's `presentation` and `enum` support. One misplaced callback in settings_ui.rs is moved from `render` to `wire`: registered in `render` it borrowed a `&SettingsController` into a 'static closure and would not compile, and that file's own docs say render pushes properties while wire connects callbacks. 992 tests pass, clippy and fmt clean. Traceability 48.3% -> 51.0%. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 23:58:17 +02:00
dtourolleandClaude Opus 5	e7130ff891	Give the library header somewhere to put six buttons ... A tablet in portrait is 1920 physical pixels at density 400 — 768 logical, which is below the 820 breakpoint, so the library was already taking the compact layout. The compact header simply was not compact: one flat HorizontalLayout holding a menu button, a title, three status readouts and six buttons. Slint's HorizontalLayout has no wrap and no overflow. Given less width than its children want it shrinks each to its minimum and lets the rest run past the edge, so "Change library" arrived as "Change li…", the readouts elided to nothing useful, and the row overflowed anyway. The six actions move into a `HeaderActions` component drawn in one of two places: inline in the header when expanded, and in a disclosure row under it behind a "More" button when compact. One component rather than two copies, because the alternative is six buttons with their visibility rules and callbacks written twice, and the copy that rots is the one behind a disclosure nobody opens while testing. The row closes itself when the window widens, so rotating to landscape does not leave a stray toolbar behind. "More" is a word rather than an ellipsis glyph: "⋯" sitting in a header of elided labels reads as one more truncation, which is the failure this change exists to remove. `LibraryGrid` takes `expanded` to decide, from the window width rather than the device (FR-UI-1) — so a narrow desktop window gets the same treatment. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 23:04:06 +02:00
dtourolleandClaude Opus 5	151dcc3c02	Make a file out of a photograph ... Export existed as a settings page and nothing else: format, quality, colour space, five sizing modes, a filename template and a metadata switch, all configurable in detail, and no way to produce a single file. dr-export is the other half. **It returns bytes and a name, and writes nothing.** An export has three destinations with nothing in common — a path on Linux, a SAF document on Android where there is no path at all (ARCH §6.9), and a PUT to a Nextcloud folder — so a crate that opened the file itself would serve one of them and be rewritten for the other two. The caller places the bytes. Resize, then sharpen, then encode, in that order and for a reason: output sharpening compensates for the softening the resample introduced, so its strength scales with how much scaling actually happened, and sharpening before shrinking would throw the result away. Lanczos-3, separable, with weights computed once per output row — FR-EXP-4 asks for Lanczos or better because a box filter turns a distant fence into moiré. Collision handling takes the "is this name taken" test as a closure rather than looking at a directory, because there is no directory it could look at that works everywhere. That shape is not politeness toward Linux: Android's createDocument renames on collision by itself and cannot overwrite at all, so all three CollisionPolicy settings need the answer *before* anything is created. Overwrite, Skip and Increment are each tested, and Increment gives up after ten thousand rather than spinning against a destination that reports everything as taken. Three things are honest rather than done: - **Colour space.** sRGB only. The shader encodes and clips to sRGB before this crate sees a pixel, so tagging a file Display P3 would claim a gamut it does not contain. Refused with a typed error instead of mislabelled; honouring it is a pipeline change (FR-EXP-2). - **AVIF and JPEG XL.** No encoder. libaom and libjxl are C, ravif is slow enough to change what a batch feels like, and the settings page offers both because FR-EXP-1 lists them — so asking for one says so rather than writing a JPEG under a .avif name. - **16-bit TIFF** is a real 16-bit file carrying eight bits of information, because AdjustPass renders to Rgba8Unorm. Widened by *257, not <<8, so white lands on 65535 rather than a quarter-percent grey. Making it mean what it says needs the composer told what format to write. Metadata is not written at all, which satisfies the half of FR-EXP-8 that matters most: strip_location defaults to on, and a file with no EXIF block has no GPS tag. Retaining camera and copyright when asked is not implemented and cannot be faked by omission. Also here: - `AdjustPass::export_pixels`, ungated where `read_output` is behind a feature. The two are the same transfer and opposites in intent: reading pixels back to *display* them is what ARCH §6.1 forbids and AC-8 asserts against, while reading them back to encode a JPEG is the only way a file has ever been made. Separate methods so the instrumentation can count one without counting the other. - `ExportTarget`, so a destination can be a folder on the server. On Android that is the only destination needing no platform work whatsoever — a PUT against create_dir, already on the RemoteBackend trait, behaving identically on both platforms. Switching target clears the destination, since a path is not a remote folder and carrying one across would offer to create a folder called `home` at the library root. Verified end to end rather than by unit test alone: `cargo run -p dr-export --example export` decodes a frame, runs the develop chain on the GPU at full resolution, reads it back, and writes all five formats — 27 ms for a full-size JPEG, 165 ms with a Lanczos reduction to 1200px. ImageMagick agrees the 16-bit TIFF is 16-bit. dr-export cross-compiles clean for aarch64-linux-android; all three encoders are pure Rust, which is why they were chosen. 944 tests pass, clippy and fmt clean. Not yet wired to a button. The develop view has no export action, so nothing in the running app can reach any of this yet. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 22:26:37 +02:00
dtourolleandClaude Opus 5	65e6a96a65	Say what the application is doing, in one bar and one list ... Every background job reported into a window property of its own — library-thumbs-done, library-pin-total, library-syncing — which only the grid ever read. A pin download that outlived the view it was started from drew nothing at all once the user opened an image, and there was no answer anywhere to "what is this busy with", because the answer was spread across eight properties nothing collected. They report to one register now (ui/dr-ui/src/activity.rs). It publishes an aggregate, which draws a three-pixel bar across the top of the shell in every view, and a row per job, which the settings page lists: scans, thumbnail batches, pin and open downloads, sidecar uploads, the sync and the trash. Failures stay on the list until they are cleared; routine successes do not, or a scroll would bury them. The handle removes a still-running job when it drops, so a worker that dies mid-transfer takes its row with it rather than leaving the bar sweeping for the rest of the session. Also carries in-flight work from a parallel session — the drawn icon set and the dr-pipeline ops split. dr-pipeline's build script does not compile at this commit; ui/dr-ui does, with clippy clean and its tests passing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 18:32:09 +02:00