6 Commits

Include renames

Author	SHA1	Message	Date
dtourolle	d3b6127db6	Let a photographer name the state they liked, and go back to it or look at it ... FR-DEV-5 asked for named snapshots of an edit state and FR-DEV-7 for a comparison against a chosen one, and neither existed. The history stack is per sitting and forgotten with it, on purpose — the gap that mattered was an automatically saved mis-drag with no way back, and that was closed first. What was left was the other half: a state the photographer wants to keep *because* it is worth keeping, which is a different thing from a step and is not served by making the steps last longer. A snapshot is an edit state, and an edit state is exactly what a sidecar version stores, so it is stored as one: a `[version]` block carrying `snapshot-of = <uuid>`. The parameters, the masks and their parts, the repairs and the film all arrive through the blocks that already carry them, a merge keys on the uuid as it does for any version, and a build that predates the key reads the block as a named version and keeps it — the right failure. Only the pointer is new. The one reader that has to know is `default_version`, which must never answer with a snapshot: a file whose edit is missing is not a file whose edit is one of its saved moments. The snapshots of an edit are listed by that pointer, oldest first, the same on every device. Writing them back removes what this sitting deleted and puts in what it holds, and leaves standing whatever it never saw — a snapshot the other device took since the photograph was opened here is not this device's to remove by not knowing about it. That is the rule the version merge already keeps, applied one level down, and it is why the save carries the deleted ids rather than replacing the list wholesale as the masks are. Each is re-pointed at the uuid the save settled on, because the default may have been fused onto its canonical identity since the snapshot was taken. Restoring is one history step, so undo takes it back whole, as a paste is. Taking and deleting are not steps: they change nothing about the photograph, and an undo that removed a snapshot would be undoing a decision to remember. Holding the eye beside one renders the snapshot and hands the edit straight back — the same suspension "Before" uses, against a point the photographer chose rather than the file. Two sessions on the same photograph get ids that cannot collide, stamped with the second and a random word, because the merge folds equal ids into one.	2026-09-12 01:08:10 +02:00
dtourolle	0a5eab0487	Wire the develop panels through globals, so a second copy is one line ... Every panel in the develop column declared its inputs and its callbacks and had `app.slint` bind each one to a property or a callback on the window root. That is fine while a panel is drawn once. N9 draws them a second time, in the portrait dock, and the wiring is what would have to be copied: `MaskPanel` alone ran to forty lines of forwarding, and a callback added to one copy and not the other compiles, renders, and simply does nothing on the layout nobody was looking at. So the wiring moved to Slint globals. A panel reads the global and calls the global; Rust hooks the global instead of the window; and the instantiation in the column is now the panel's name and a pair of braces — every one of the ten children of the column, with no property that differs by placement left to supply. There is a global per panel family rather than one for all of them, and the reason is an import cycle. Each panel's model struct — `ParamRow`, `MaskRow`, `HistogramView` — is declared in the panel's own file, so a single global holding `[MaskRow]` and `[ParamRow]` would have to live in a file importing `masks.slint` and `adjust.slint` while both imported the global back, which Slint rejects. Breaking that needs six model declarations relocated, which is a change to the data model and not to the plumbing this is about. A global beside the panel it serves also lets each name drop the prefix it was carrying only because the window root is one flat namespace: `root.spot-radius` is `Repair.radius`, and `root.peaking-on` is `Peaking.showing`. `session.slint` is new and holds the two facts every family needs and none of them owns: whether there is an open photograph to edit, and which mode the view is in, with the three readings of the mode derived once instead of at each of the dozen places that tested one. `ViewMode` moves there from `adjust.slint`, where it was only ever a lodger. Nothing on screen changes. What is not here: the tool rail and the status strip still take their properties at the instantiation, because they are drawn once and N9 does not copy them; the preset sheet's own state stays on the window, because the library grid opens the same sheet and a global cannot bind the window's state — which is why `Transfer.open-presets` is handled in `presets.rs`, beside the summary it already had to compute.	2026-09-07 20:01:01 +02:00
dtourolleandClaude Opus 5	8e7b1350bf	Name the frame's category for the decision, not the maths ... `Attribute::Geometry` becomes `Attribute::Compose`, and `film_sim` moves from `[tone, colour]` to `[effect]`. Two categories were doing the wrong job. "Geometry" describes what crop, straighten and the quarter turns do to coordinates — but it describes lens distortion correction exactly as well, and that is not a compositional choice at all. Naming the attribute for the photographer's decision is what separates it from `Optics`: one is what the lens did, the other is what they chose. The maths the two have in common is not the thing worth filing them under. A film stock declared both `tone` and `colour`, so "Kodachrome" appeared in the Light group beside exposure and again in Colour beside white balance — two places, neither of which is where anyone looks for it. It is neither: `Effect` is defined in this same file as "applied rather than corrected — a look, not a fix", which is what a stock is. That it moves tone and colour is true of every look, and is not what the attribute is for. `from_name` still accepts "geometry" on the way in. That string is persisted in `develop.copy_attributes`, and an entry it fails to parse is not an error — `presets::scope_for` logs it and drops it — so without the alias an existing settings file would have quietly narrowed what a paste carries. `name` writes the current spelling, so the file migrates itself the first time it is saved. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-09-05 14:34:03 +02:00
dtourolleandClaude Opus 5	ef07e6ca3e	Give the canvas tools a rail of their own, and the column one width ... Crop, Local and Repair were chips at the head of the develop column, sharing a row with the adjustment groups and told apart from them by the shape of their highlight. Three things followed from that, and only the last is cosmetic: the column closes, so the way out of a mode went away with the way in — hence the duplicate "Done Cropping" over the canvas; the chips are generated from the operation set, so the widest thing in the sidebar was a row nobody had chosen the contents of; and a mode and a filter are different kinds of state wearing one control. They are a fixed 60px rail down the left now, generated from a single table in toolrail.slint. A tool is one row of it plus a drawing plus a ViewMode variant; nothing in app.slint is touched to add one. What is left of the strip is the group filters, so it is GroupStrip. The column stops measuring itself. Every panel published a content-width and declared it as min-width, and the column took the largest — which spent the photograph's pixels on whatever happened to be widest, and moved the image sideways when switching tools swapped one set of panels for another. It is panel-width now, one number in style.yaml. That number is 360 and it is measured, not picked: the contents report a minimum of 344 in every mode, and they do not compress below it because a Text that does not elide reports the same minimum as preferred. 320 was tried and sliced Paste down the middle. The Flickable's viewport is floored at the layout's minimum rather than its preferred width for the same reason — content that is never told how much room it has cannot adapt to having less. Removing the eight content-width declarations repairs three comments an earlier edit had spliced sentences into. The raw histogram's note on keeping its hint short is rewritten rather than dropped: an over-long hint no longer widens the column, it pushes the column's minimum past the width it has and clips the panel, which makes that constraint sharper rather than obsolete. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-30 09:59:50 +02:00
dtourolleandClaude Opus 5	cafa63ca6f	Let the develop column ask how wide it needs to be ... The column was 280px, a number chosen for a tablet, with 380px bolted on later for a desktop. Both were guesses at how much room the widest row inside needs, and a guess is what cannot work here: the mode strip is one chip per attribute the *operation set declares*, so the row is generated and no constant in app.slint can track it. When the guess came up short the failure was not a tidy clip. The Flickable inside the column never had its `viewport-width` set, so the viewport took its content's preferred width, and a viewport wider than its Flickable is *centred* in it — the same rule the note on the seam's `x: 0` already records a few lines below. So the column lost half of each edge rather than one of them: "HISTOGRAM" read "ISTOGRAM", "Straighten" read "aighten", Copy sat centred while Paste ran off the far side. It looked like a rendering fault and it was an alignment one. So the column asks instead of guessing. Every panel that can appear in it — image, histogram, geometry, settings transfer, masks, repairs, adjust, history — now publishes a `content-width`: how wide it has to be before it starts clipping itself, read off its own layout rather than asserted. Each declares that as its `min-width` too, and that is what makes the aggregation automatic: `column` is a layout, so it already reports the largest minimum among its children, and it does so for the panels that come and go with the mode as well, which live inside `if`s and cannot be named from outside. Grep `content-width` in ui/dr-ui/ui to see every panel with a say in the answer. The mode strip is named explicitly only because it is pinned outside that layout, so nothing else measures it. There is no floor left. A floor is one more guess and the panels state their own minimums now. The only thing still above the measurement is `panel-max-width`, which is not a size but a policy — a column may not take the window from the photograph it exists to serve — and it comes from Rust beside `layout-class` because a width read from `root.width` inside the layout that `root.width` depends on is a binding loop. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-27 21:23:44 +02:00
dtourolleandClaude Opus 5	d7a81375ee	List the steps, and let a photographer step straight to one ... Undo answers "take back the last thing", which is the question asked about a mistake just noticed. It is the wrong instrument for one noticed six adjustments later: eight presses, each changing the picture, with no way to see how far back the mistake is without passing through it. A step is a whole state, so arriving from six away costs what arriving from one does — which is what makes a row worth making clickable rather than decorative. `Edit::Discrete` had to go for the list to be worth drawing. Seventeen call sites recorded the same anonymous step, which is fine for deciding whether two changes are one gesture and useless for a panel: seventeen rows reading "Discrete" is not a history. Every variant now carries enough to name itself, and the compiler enumerated the sites that had to start saying so. A step that moved a parameter is still named out of the descriptor, so an operation added as a YAML declaration appears in the history correctly named with nothing written for it (FR-DEV-3c). Choosing a film stock was not undoable at all. The pick went straight to `choose_film`, which nothing on the history's path ever sees. `pick_film` records it, and is separate because the same call is also how a *restored* edit gets its tables back — recording that would push a step for the undo the photographer had just asked for. The list is rebuilt off a revision rather than off every redraw. A drag ends in a redraw per frame while folding into one step, so the unconditional version would tear down and recreate every row sixty times a second to arrive back at the list already on screen. The counter is process-wide: a per-instance one starts every photograph at the same number, so a frontend holding "the revision I last drew" would keep the previous image's steps on screen — invisible while every image opens with one identical row, and a wrong-photograph bug the moment persisted history means it does not. The step names that no descriptor can supply are constants with a roll, and a test walks the roll rather than a second copy of it. `resolve` splits so that "is this catalogued?" can be asked: `derive` turns `history.mask_toggled` into "Mask Toggled", which names a field rather than an act and, being perfectly readable, is a mistake nobody would look at twice. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-26 23:04:35 +02:00