A crop handle straddles the picture's edge. With the photograph fitted
to the whole canvas, the bottom handles sat in the photo roll's band,
whose swipe handler takes every press inside it, and the bottom-left
one under the "Done Composing" row, which is declared after the overlay
and whose buttons press 44px tall. Both were drawn and could not be
grabbed: on a laptop-shaped window, one or the other for nearly any
photograph.
While composing, the canvas box is inset 16px from its clip and stops
above the band, the row's margin and the row's hit height. The band is
measured once, on the canvas, and the row reads it from there.
The panorama scene now ends in the grid, on the composite in its wide
cell beside the twelve frames it was made from, with the thumbnail the
merge made: the picture is taken straight after the merge, before any
rescan could have found the file. The manual's library section says how
a panorama's cell is sized and packed, and its panorama section that the
composite is in the grid the moment it is written. panorama.md §9 records
the race that kept it out, the catalogue-then-register path that
replaced it, how the thumbnail is developed, and the layout's classes.
The presets menu and sheet listed every preset under flat section
headings, seventy rows to scroll past. They now list folders, closed
until opened, with how many presets each holds; opening one shows what
is inside it, folders and presets indented beneath.
A category is spelled in the name: "Portraits/Warm skin" is Warm skin
in a Portraits folder under Yours. The file format does not change, so
an older build lists the whole path as the name; renaming a preset is
how it moves, and saving or renaming into a folder opens the way to it.
A Lightroom import names what it reads after the folders below the one
chosen, and a "/" in a displayed name becomes "∕" so it files nothing.
The shipped film sections become Film › Colour, Cinema and Black and
white.
The tree is built and flattened in Rust (PresetTree), each row carrying
its depth, and which folders are open is remembered for the session.
A PopupWindow keeps the size it was shown at, so a folder opened in the
menu pushed its contents under "Save or manage…"; the menu is shown
again after each toggle to take its new height. That is a function on
the rail because Slint 1.17 generates Rust that does not compile for a
popup's close() reached from inside the popup. The sheet's list takes a
preferred height of up to 400px, since a Flickable reports next to
nothing and an opened folder showed three rows.
The manual describes the folders and naming. Its pictures show the menu
with Film › Colour open, and a black-and-white stock applied from Film
› Black and white; the scenes aim popup rows from the rail's entry, and
pick the menu's "Film" over the develop column's film chooser.
A 22927×8966 Lightroom panorama opened as its embedded preview with
develop withheld, because no texture could hold it. DevelopSession now
opens a linear DNG past PROXY_EDGE (8192) on a box-reduced copy, and
keeps the full resolution on the CPU. The canvas at fit, the thumbnail,
the histograms and the masks work from the copy; a render finer than
it — the canvas zoomed in, a tile of the export — samples a window cut
from the full resolution, kept while the view stays inside it. The
export renders in halo-grown tiles of 4096 and assembles them.
On the panorama: decode 1.6 s, open 210 ms, canvas 37 ms, a zoomed
window 130 ms, the full-size export 5.9 s.
DemosaicedImage::linear_rgb16_window uploads part of a linear DNG, or a
box-reduced copy of it, and says where it sits in the frame; size() now
reports the frame and texture_size() the texels, and the fused pass
writes the window into the shader's uniforms. EditGraph::source_region
finds the part of the source a view reads, and tiles::plan cuts a render
too large for one texture into halo-grown, grid-aligned tiles.
The GPU test renders frames a tile at a time from their own windows and
compares them with the whole: identical for point operations, within one
code value when straightened with clarity on.
A frame fraction was taken of the render's short edge, and render_scale
folds the zoom into the region the render stands for. Zoomed to 1:1 on a
corner, clarity, texture and dehaze drew a quarter of the halo the export
gets, though the docs promise they preview honestly at any zoom.
RenderScale now carries the whole framed frame (within), and a frame
fraction is measured against it; at fit nothing changes.
A photograph larger than one texture has to be developed from a part of
it or from a reduced copy of it. The generated prologue measured the frame
by the bound texture, so either would have moved every crop, warp and
grain seed. Two uniform vec4s now say which part of the frame the texture
holds and how large the frame is; the sampler maps into the texture
through to_window, and a texture holding the whole frame samples exactly
as before ((uv - 0) / 1 is uv to the bit).
The tone curve clamped its input to [0, 1] and its output back to 1.0
around a 2.2 gamma, mid-chain — master and per-channel both. So any
edit with a curve made every scene value above 1.0 the same number
before the view transform ever saw it: D19's fourth finding. Beyond its
last point the curve now continues along its last span, whose secant
is the tangent the spline already gives that point, so the join is
smooth and an identity curve stays the identity to any height. The only
clamp left is the floor at zero, where there is no light to curve.
FR-DEV-2's acceptance test is how the rule stays true.
`scene_referred_until_the_view` wraps every point operation, at
non-neutral settings, between a gain of sixteen and one of a
sixty-fourth, with an identity in the view transform's place, and
renders a ramp from 0.4 to 15.2 times sensor saturation through it. The
output must still increase with the input and still separate the top of
the ramp. Run against the previous commit's tone curve it fails with
[21, 29, 33, 33, 33, 33, 33, 33]; every other operation already passed.
It renders on a device because dr-pipeline has none, and the spec's
pointer to it says so.
A film stock ran at order 25, after white balance and exposure, and
everything after it — contrast, the curves, the colour mixer, the
grading, every mask layer's tone — acted on the film's display-referred
output, as though the frame had been scanned and then worked on. That
was a display-referred rendering in the middle of the chain, which D19
removes (FR-DEV-3f, FR-DEV-3j).
`film_sim` is now in `Stage::View` beside `view_transform`. While a
stock is loaded the composer emits it in the view transform's place and
not the sigmoid; otherwise the sigmoid. So every edit is a decision
about the exposure the negative receives, and the film is the last
thing that happens to the picture — after the detail stage too, in the
view pass, which already binds the film's tables, the mask array and
the grain's source position. Its per-layer settings blend there as they
did in the fused pass.
`op_renders` goes: a rendering is chosen, not suppressed, and the only
render with no view transform is the camera-space tap. The YAML order
moves to 190 so the panel reads in pipeline order; the stage, not the
number, is what places it.
Existing edits that combine a stock with tone or colour operations now
render differently: those operations used to act on the print, and now
act on the scene.
The fused pass stops at "linear working values" when a sharpener, a
blur or a repair follows, and the detail passes convolve what it hands
on. Until now it handed on the rendering: the base curve, and since the
last commit the view transform, ran before the store. So every kernel
worked on display-referred values while its comments promised the
opposite — D19's second finding.
A fused pass composed for a detail stage now stops before the view
transform, and carries a second shader, `ComposedShader::view`, composed
from the same inputs. It runs the same prologue, for the positions a
fragment reads (a film's grain seeds from `source_px`) and the corners
it blacks out, takes its colour from the detail stage's result bound
where the sample cache would be, and runs the view transform, the
output transform and the mask reveal. `render_detailed` dispatches it
after the last detail pass, in the same encoder.
So no detail pass encodes any more. Every pass writes an intermediate,
the last one included, which retires three things that existed only to
make the last pass encode: `writes_output` and the runner's second
layout, the body-less resolve pass for an active kernel with nothing to
draw at this scale, and capture sharpening's pass-through, which now
emits no pass at all. An empty chain is a whole render: the view pass
reads the fused result directly. The detail stage no longer takes an
output space either, so `compose_detail_for` folds into
`compose_detail` and the space is named once, on the fused half.
The cost is one full-render read and write per frame when a detail
stage exists, and a third intermediate for a one-pass chain.
FR-DEV-3j gives the view transform two controls, contrast and the white
point in stops above middle grey, persisted and held per mask layer like
any other setting. A scene-referred pipeline whose white point cannot be
moved hands the photographer a shoulder they cannot place.
`view_transform` is a hand-written node in `Stage::View`, a new stage
the composer emits last and emits whatever the node's state: a neutral
operation is otherwise left out of the shader, but a photograph with no
view transform is a scan. "Active" keeps meaning "moved from the
defaults", so an untouched photograph writes nothing for it and
`every_node_starts_neutral` still holds. A caller whose chain holds no
view operation gets a default one.
The composer's loop becomes an ordered list of steps — camera nodes, the
matrix, scene nodes, layer-only nodes, the view — so each is emitted in
exactly one place. The base curve could not be a node because it
belonged to the camera; the ops README records why that argument went
with it (D19). The panel shows it in the Light group as "Tone Mapping".
Tests that counted the blocks of a neutral graph now count one, the
view transform, and the two chain-wide tests that load a film expect the
view transform to be absent, since a stock replaces it.
The base curve was a five-point spline on the unit square, flat past its
last point: every value above 1.0 left it as the same number, per
channel. Exposure and highlight recovery put values up there, and the
curve threw them away, then handed the result on as though it were
still scene-linear. The six per-body curves were also, by their own
file's account, hand-tuned shapes rather than measurements, and not
enough is known about where they came from to keep them (D19).
In their place, one view transform for every body (FR-DEV-3j): a
log-logistic sigmoid per channel, with the middle channel put back
between the other two so a hue survives the shoulder. Its two free
constants are solved from two conditions rather than set: scene grey
0.13, where the retired default curve put it, lands on display 0.18,
and the scene white four stops above grey lands on 1.0. So a highlight
a stop past sensor saturation still rolls into white, and the midtones
stay within 0.26 EV of the retired default between scene 0.03 and 1.0.
`dr_pipeline::view` holds the CPU reference and the WGSL, and the tests
there are FR-DEV-3j's acceptance criteria.
It is still fixed and still in the fused pass's tail, so a detail stage
still sees rendered values; the next commits make it an operation and
move it after the detail stage. It is skipped for a JPEG, as the base
curve was, and absent from the camera-space tap.
The base curve's database, its lookup and its twelve uniform slots go.
`RawImage` and `DemosaicedImage` lose the field, and the GPU test that
proved a curve reached the shader is replaced by one that renders the
view transform against the CPU reference and shows two highlights above
1.0 still render apart. The JPEG-and-sensor test now asserts the two
differ by exactly the view transform, where before an identity fixture
curve had made them match.
Every point operation ran in camera RGB and the camera matrix came after
them all, against the order ARCH §5.2 draws. So `luminance()` applied
Rec.709 weights to a body's own primaries, a band in the colour mixer
was a different hue on every make of sensor, and the vibrance skin guard
tested channel order in a space where skin does not have one.
Operations now declare a `Stage`. White balance is the only camera-stage
node — its multipliers scale the sensor's channels, and after a matrix
that mixes them the same numbers are a different correction — and says
so with `stage: camera` in its YAML, a key both the build-time generator
and the load-time declared op read. The composer emits the camera nodes,
then the matrix, then the rest, each group in graph order; an empty
chain still gets the matrix.
Film simulation stops converting out of camera space itself, since it is
now handed working-space colour like every other scene node. The base
curve stays where it was, after the operations, and so now acts on
working-space colour; the next commit replaces it (D19).
The spec missed Ansel, and with it Aurélien Pierre's argument that a
display-referred curve early in the pipeline throws away what every
later stage needs. Read against that argument, the code broke it four
ways: the base curve was flat past its last point and so clipped every
recovered highlight; the detail stage was handed curved, clipped values
while its comments promised linear ones; the edits ran in camera RGB
because the matrix had drifted to after them, against ARCH §5.2; and the
tone curve clamped to [0, 1] around a 2.2 gamma mid-chain.
D19 records the decision: unbounded scene-linear colour from the matrix
to one view transform, last, after the detail stage. FR-DEV-3j specifies
that view transform as an adjustable operation (contrast, white) with a
default fitted to where the retired default curve put middle grey.
FR-DEV-3e retires the per-body base curves, whose own file called them
hand-tuned shapes of unknown provenance. FR-DEV-3f makes a film stock
the view transform when one is chosen, instead of a rendering at order
25 that the later edits acted on. FR-DEV-2 gains the acceptance test
that holds the rule, and ARCH gains §6.14 and the corrected §5.2 order.
A frame that did not fit ended the job with its name, and the only way
on was Back, a smaller selection and every frame read, demosaiced and
searched for keypoints again. Each row on the page now has a box. An
unticked frame is left out and the rest are solved again from what the
first pass measured.
dr_pano::align is split for it: match_pairs does the matching and the
pairwise RANSAC once over every frame (about 5 s for twelve), and solve
takes a subset of the frames and uses only the links among them (about
0.1 s). Solving a subset by re-aligning it also moved every RANSAC seed,
which are keyed on frame position, and on the fixture set that was
enough to lose a marginal link and strand a neighbour of the frame left
out.
A frame that cannot be placed no longer stops the job either. Its row
names it and Merge stays off until it is unticked; the headless example
leaves such frames out the same way, and takes --leave-out N to try it.
A clipped photosite reaches the merge as (1, 1, 1), which the as-shot
balance turns magenta. The preview balanced it with no highlight rule at
all, so every blown cloud was pink on the alignment page. The DNG had the
quieter form of the same fault: a frame's gain below one moved a blown
sample off the white level, and a feather mixed it into a neighbour's
real sky, so the develop's own desaturation no longer recognised it.
The merge shader and the preview now write a blown sample, before the
gain, as the camera value the composite's balance calls grey — the
develop pipeline's neutral, fading in from CLIP_ONSET.
Presets were a "Presets…" button in develop's top bar that opened a
sheet over the photograph, so applying one was two clicks with the
picture covered. They are now an entry pinned to the bottom of the tool
rail, apart from the tools because a preset arms nothing, and it opens a
menu beside the rail: the same sectioned rows the sheet lists, one click
to apply to the open photograph. The menu's last row, "Save or manage…",
opens the sheet, which keeps saving, renaming, reverting and importing,
since those take a name or a path.
The menu is a PopupWindow for the film list's reasons, with the list in
a clipped box of its own; the Flickable alone let its last row draw over
the manage row. Choosing from it zeroes preset-apply-count before
applying, since the grid may have left its selection count there.
The manual says where presets are now and gains a picture of the open
menu. The scenes reach the sheet through the menu and aim the manage
row from the rail's entry, as the film list's rows are aimed, because
the automation reports a popup's elements in the popup's coordinates.
On Android the desktop scrollbar is off, so every scroller that has one
on a desktop (the develop column, the grid, the collections sidebar,
Settings, the help sheet and the film list) gave no sign of how long it
was or where the view was in it. That is how the black-and-white film
stocks came to look deleted when the list could not scroll.
ScrollBar now has a second mode, chosen in the one Scrolling global:
where bars are off and `cue` is on, it draws the thumb alone, 3 px wide
against the edge, while the viewport moves, and fades it 500 ms after
the last move. It has no TouchArea, so a flick that starts on it
scrolls the content. Rust sets cue on touch-first builds; a desktop
build shows it when DR_SCROLL_CUE is set, to look at it without a
device. Desktop is otherwise unchanged.
Test: on the testing backend's help sheet, a press on the cue moves
nothing, a drag starting on it carries the list with the finger, the
cue is drawn while the list moves (drag, fling, wheel) and not once it
is idle; with bars on there is no cue and the thumb still takes a drag.
apply_judgement and apply_label carry TRACES: R7, the burst
representative callback FR-CULL-13 with a note that choosing it writes
the grouping and no verdict. The register's status for FR-CULL-13 says
the write-path test is met and the evidence chips are outstanding.
Traceability matrix regenerated.
`a_resaved_file_owes_a_reread_and_loses_its_stale_hash` failed once in a
full dr-catalog run (updated 0, expected 1) and passed three times alone.
The incremental scan tells a changed file by its mtime at whole-second
resolution, and the `resave` helper wrote and renamed the file within
the same second as the scan before it, so on a fast enough pass the
resave looked like no change at all.
The helper now sets the file's and its folder's mtime two seconds ahead,
which is what a real resave some time after a scan looks like. Only the
test helper changes; the scan's rule is right for real files.
A hot photosite went into the demosaic as it was read, and came out as a
coloured cross three pixels wide that nothing later could take back
out. Night and long exposures showed them; the defect-map reader added
for FR-RAW-3 was never wired in, and a CR2 carries no map anyway.
A pass over the mosaic now runs ahead of the demosaic, into a second
buffer. A photosite is hot when it reads more than twice every
same-colour photosite in its 5x5 window plus 2% of the range, and more
than twice each of its eight immediate neighbours of any colour. The
second half keeps stars and glints: real light reaches the sensor
through a lens and an anti-aliasing filter and lights a patch, so the
photosites beside it are lit too, where a hot photosite's are dark. It
is replaced by its brightest same-colour neighbour, which invents
nothing. Dead photosites are the mirror case, judged only where the
neighbourhood is above 5%, so shadow noise clipped at black is left
alone.
The colour of each photosite comes from a 6x6 sensor-anchored tile, so
Bayer and X-Trans share the pass. Export and every other path that
demosaics get it too, and there is no setting: the repair only fires
where a single photosite disagrees with everything around it.
Cost, warm, on a Canon 6D frame (RTX 3050): 91-99 ms to demosaic
before, 94-98 ms after; the extra pass is inside the run-to-run noise.
Tests render a frame with and without the defect and compare the
finished pixels. Without the repair a hot photosite showed by 230 and a
dead one by 168; with it neither shows, and a 3x3 highlight at white
survives.
A layer offered the film's sliders and they moved nothing: its copy of
the node was never given the stock, so it stayed inactive. Film now
works in a layer the way the other adjustments do, as offsets to the
photograph's settings, but blended as settings rather than as results,
since a film is a rendering and cross-fading two developments is not
what a region on a pushed film looks like.
- dr-film bakes no slider. Exposure is a gain in the shader; push
interpolates the stock's measured processes, one curve row each; the
print is split at the paper's log exposure, so print exposure is an
addition between two lookups and exact at any setting. The enlarger
stays balanced at the photograph's exposure.
- film_sim reads all four settings as uniforms, format one-hot over a
grain count per format, so every uniform is linear in what it does.
- Operation::blends_settings lets the composer average each overlapping
layer's uniforms with the global ones by mask weight, the global
setting taking whatever weight the layers leave, and run the fragment
once. Three layers at full weight give the mean of their settings.
- The stock picker is hidden on a layer. Only the photograph's exposure
re-solves the print balance; push, print exposure and format need no
rebake at all now.
Reducing contrast turned every black in a night photograph pink. The
fragment lifted each pixel's luminance to its target by multiplying the
colour by target/luma. For a pixel at 0.001 on the way to 0.09 that is
a gain of ninety, and in the deepest shadows the channels are sensor
noise: after white balance the red and blue noise sits above the green,
their multipliers being nearly twice its, so ninety times that noise is
magenta.
Flattening now mixes the colour toward middle grey, which gives the
same luminance and adds the lift as a neutral. A black goes to grey and
its noise stays the size it was.
The same fragment clamped luma/0.36 into the curve's 0..1 domain, which
scaled every tone above twice middle grey down to 0.36 in either
direction: contrast +10 took a 230 grey to 162. Those tones are now left
where they are, which is continuous with the curve's top (value 1,
slope 0).
Seven names are two or three live people on both devices: Ian (756
confirmed faces, and a second Ian with none), Jessie three times,
Claudine, Mathias, Noemi, Pascal and PJ. Each was typed on its own
device and carried across by sync, which keys people on their uuid and
so keeps both. Each half of a person shows half their photographs.
dedup_people::run, in one transaction:
- Same-name people (trimmed, case-folded as the Identity screen folds
them) merge into the one with the most confirmed faces, ties to the
smaller uuid, through faces::merge_people_within, so confirmations,
rejections and the survivor's name are kept. A person holding no
faces at all merges: there is nothing to compare or to carry. Anyone
else needs >= 2 confirmed faces per shared embedder on both sides and
centroids at cosine >= 0.7 in each. A face confirmed as one and
rejected as the other keeps them apart. Unnamed and set-aside people
are never merged by name.
- Faces held twice (one image, one embedder, IoU >= 0.5, cosine >= 0.7)
keep the stronger detector's row (FaceDetector::outranks), then the
confirmed one, then the older. The survivor takes the confirmed
assignment and both rows' rejections. A pair confirmed as two
different people is left and counted.
- Judgements still on a merged-away person move to the person at the
end of its redirects, and a redirect cycle (two devices merging one
pair in opposite directions) is broken at the smaller uuid.
Measured on copies of the desktop catalog and the tablet's server
snapshot, w600k_mbf, confirmed faces only:
- Centroids of differently named people: 2,699 pairs, median 0.02,
99.9th percentile 0.41. One pair reaches 0.70 (0.700 desktop, 0.705
tablet), "Michelle Casanonve" and "Michelle Casanova", one person
typed two ways. Next is 0.62/0.64, "Boris Jost" and "Boris". The
highest pair that is plainly two people is 0.43/0.44.
- One person split in random halves: minimum 0.69, median 0.91 over 72
people. Four faces against twenty-two reach 0.7 in 97% of draws.
One face against twenty of somebody else's reached 0.74 in 3,000
draws, and two faces reached 0.61, hence the two-face minimum.
- Pascal (22 and 4 confirmed) is at 0.57 and PJ (14 and 7) at 0.50,
under 0.7 on both devices, so both pairs stay apart and are logged.
The desktop's second Ian holds 4 suggestions and no confirmations,
at 0.38 against Ian's centroid, and stays apart. On the tablet it
holds nothing and merges.
Why a merge made here survives a peer on 0.17.0: the merged-away
person stays as a merged_into redirect with a bumped revision, which
the catalog merge has always taken on revision. The peer hides the
duplicate and never sends it back as a live person. Its own
confirmations of that person stay on the redirect, because a merge
never overwrites a local confirmation. The manual merge has always
left them there too. They follow the redirect when the peer runs this
job. A test syncs two catalog files through the previous merge code
and back, and the people converge and stay converged.
Once a catalog is clean the job reads 80 redirects, the named people,
and the face boxes from the covering faces_box index. That is ~10 ms
on the reference library. There is no schema change. The index is
created IF NOT EXISTS, as the merge already does.
merge_people moved a person's faces onto the target and left the
"not this person" rejections on the redirect. A rejection there binds
nothing: once Annie is Anna, the grouping pass is free to suggest the
face the user pushed away from Annie as Anna, which is the behaviour
rejections exist to prevent. The Identity screen's merge has done this
since it was written, and the deduplication job for #78 merges through
the same function, so it would have done it for every same-name pair.
The source's rejections now move to the target (INSERT OR IGNORE, so
one the target already holds is not doubled). Where the two halves
disagree about one face, confirmed as one and rejected as the other,
the confirmation stands, as `confirm` already rules for one face; and a
moved rejection withdraws a suggestion of the same face, as `reject`
already does. Confirmations and names are unchanged.
The body is split into merge_people_within, taking the caller's
transaction, so a job that merges several pairs commits once
(unchecked_transaction cannot nest). merge_people keeps its signature
and its one transaction.
The sidebar's "All photographs" row was bound to library-total, which
is the scope's count: the header's "412 images" and the scrollbar's
size. Under a collection, and now under an album, the row read as the
album's size — 4 where the library holds 70.
It reads a separate library-whole-total now: the same number as the
scope's when nothing is scoped (no second count), and otherwise the
unscoped count under the same filter, read only when the view's facts
move, so scrolling inside an album does not recount the library.
Dehaze cost 22.9 ms of a 2560x1600 frame on the reference laptop RTX 3050,
and 54.1 ms at 3840x2160, with the memory clock held at 810 MHz by the power
cap (graphics 1762 MHz). It ran five passes: a run and a span erosion along
x, the same along y, and the recovery. At those clocks a detail pass costs
what it reads and writes, not what it taps: a pass with an empty body -
one render-sized rgba16float read and write - measured 4.0 ms, and each
dehaze pass 4.4-4.6 ms, so the taps were about 2 ms of the 22 and the four
hand-offs between passes were the rest.
Each axis is now one pass that takes the minimum over the whole window
directly, and the recovery rides in the y pass, which already holds the
veil and the pixel's own colour. That is 36 texture reads per pixel at
2560x1600 in place of 12, nearly all of them cache hits, and two passes in
place of five.
The picture is the same bits. A minimum is exact in any order, and the
window is the one Split always covered, the surplus pixel on the far side
included (Split::first and Split::width). The veil crossing the removed
hand-offs was already exactly representable in rgba16float - a minimum of
channels read from rgba16float, floored at zero - so storing it between
passes never rounded anything that the fused form now keeps unrounded.
Measured with a scratch probe that renders the synthetic 60 MP frame from
examples/frame_budget.rs, only a detail parameter moving so the fused pass
is reused, 30 frames per scene after six of warm-up, five runs of each
binary alternated, median of the per-run p50:
scene before after
dehaze 2560 fit 22.88 ms 9.06 ms
dehaze 2560 1:1 23.41 ms 9.52 ms
dehaze 3840 fit 54.09 ms 28.12 ms
all detail 2560 fit 53.11 ms 39.97 ms (NR, sharpen, clarity,
all detail 2560 1:1 67.48 ms 56.42 ms texture, dehaze)
every op 2560 fit 57.59 ms 44.19 ms (with film)
every op 2560 1:1 71.83 ms 57.93 ms
controls without dehaze (NR, sharpen, clarity, texture): within +-2%
The rgba8 output hashed identically before and after for every scene -
dehaze alone, all five detail operations, every operation with film, and
each other detail operation alone - at fit and 1:1, at 2560x1600,
3840x2160, 1917x1203 and 333x211: 64 of 64.
rustfmt over the files the albums work touched, and the album merge's
incoming row as a named struct rather than an eight-field tuple, which
clippy's type_complexity refused.
An album is a named export destination. Its folder holds only the
exported files; the catalog records, per file, the image it was
rendered from, so an album can show the originals behind its JPEGs
(FR-EXP-10).
The tables are created on first use (CREATE TABLE IF NOT EXISTS), the
way dedup_probes is, rather than by a schema migration: a new
user_version makes every older build refuse this catalog's snapshot at
sync, and the 0.16.0 tablet would stop merging collections, keywords
and people for a feature it does not have.
Albums merge as collections do: by uuid and revision, tombstones on
delete, exports as a set union keyed on the server's file id (content
hash for a folder library). A folder on the server lives on the album
row and syncs; a folder on this device lives in album_folders, which
the merge never reads and the upload snapshot drops, because a path or
a SAF grant on one device means nothing on another.
Exports are keyed on the file name, not the image: two crops of one
photograph are two files and two rows, and an overwrite re-points the
name at whatever wrote it last.
A Lightroom preset changes the settings it was saved with and leaves every
other one where the photograph had it. Imported as a whole edit, a preset
holding only a grade reset the exposure, white balance and noise reduction
it was put on top of — the opposite of what the photographer had in
Lightroom.
Imported presets now reach only the operations they name
(`Reach::Named`), the rule the shipped presets already follow.
The six starter presets were copied into the photographer's own library
on a first run and were theirs from then on. That cannot grow into a
real collection: a copy is frozen at the release that wrote it, so an
improved preset reaches nobody who had the old one, and re-seeding would
overwrite a preset someone had tuned.
`dr_pipeline::bundled` now holds the shipped presets as `.drpl` files
compiled into the binary, in sections — Essentials (the former six) and
three sections of film presets, one per measured stock in dr-film,
printed on the paper its profile names — and never writes them to the
user's file. Every shipped preset is a look (`Reach::Named`), so applying
one keeps the corrections a photograph already has.
A name links a photographer's copy to a shipped preset. Saving over a
shipped name makes their version the one that name applies; it is listed
in the shipped section, marked as changed, and deleting it reverts to the
shipped one. Renaming it makes it one of their own and the shipped preset
reappears. Keyed on the name because that is what the photographer sees
and chooses by.
Copies an older first run seeded are forgotten on load where they are
still exactly as seeded — otherwise all six would list as changed and
stay frozen at their old values. A tuned one is kept and now overrides.
The sheet lists "Yours" first, then each shipped section, with headings.
Shipped rows apply and nothing else; a changed row offers Revert where
the photographer's own offer Delete. A dr-ui test checks every shipped
film names a stock this build can bake, on that stock's own paper,
because dr-pipeline does not link the profile database.
The film presets name stocks by id; the measurements behind them are
spektrafilm's (CC BY-SA 4.0), attributed in each file as in dr-film.
A preset could not choose a film stock. The stock is a choice of material
rather than a parameter, so `Preset` — a map of `op.param = value` — had
nowhere to hold it, and "Portra 400, printed" could not be saved, copied
or shipped as a look. Worse, the film node's own sliders *were*
parameters: a paste moved one stock's exposure and push onto whatever
stock the target was on, and left the target's tables baked from the
values it had just replaced.
A preset now carries a `FilmRef` beside its parameters. It travels under
whichever scope carries the film node, so the stock and its sliders are
never split, and by the replacement rule every other parameter follows:
applied at that scope, a preset without a film develops the target
without one. `Preset::apply` returns the `FilmRebake` it owes, as
`EditGraph::set_state` already did, because this crate cannot bake a
stock; the develop session pays it before recording the step, and the
batch paste writes the stock into each sidecar through `film_for`. The
library file spells it `film =` / `film_print =`, as a sidecar does, and
an older build keeps those lines as ones it does not understand.
`EditState` keeps the film in its own field only: the parameters it
captures leave it out, so one edit has one place to say which stock it
is on.
Second, a preset now has a reach. Replacement is right for a copy of a
whole edit — "make these match" — and wrong for a look: a stock-only
"Portra 400" applied that way would put the photograph's exposure, white
balance and noise reduction back to default. `Reach::Named` replaces only
the operations a preset names (whole operations, so a look that sets the
blacks resets the whites beside them) and the film only if it names one.
Saved edits and the clipboard keep `Reach::Whole`; the line `reach =
named` is written only for the other, so existing libraries write the
same bytes.
`label_histogram` runs on every label keystroke and after every batch of
judgements is saved. On the reference library it cost 7.2-8.4 ms best-of-50
by catalog_bench (13 ms on a busy machine), to report that none of 23,500
images carried a label.
The join was the rating histogram's, with one thing worse: the index does
not carry `label`, so each probe went on to read the version's row.
SCAN i USING COVERING INDEX images_folder
SEARCH v USING INDEX versions_judgement (image_id=?) LEFT-JOIN
USE TEMP B-TREE FOR GROUP BY
It now takes the rating histogram's shape: only labelled default versions
are grouped, and the unlabelled slot is what is left of `judged_rows`.
SCAN versions USING INDEX versions_judgement
USE TEMP B-TREE FOR GROUP BY (the labelled rows only)
That pass still reads each default version's row for `label`, but in the
index's order, which follows the table's; a partial index on the labelled
rows would make it index-only, and was not worth a new index for the
remaining 1 ms. After: 1.7-2.0 ms, the same answer on the reference library,
and a test that compares it with the old join over the awkward states the
rating test uses (a second default's label counted, unknown codes and zero
folded into unlabelled).
`rating_histogram` runs on every star keystroke. On the reference library
(24k images, 1,200 of them rated) it cost 6.3 ms best-of-50 by
catalog_bench, and up to 10-14 ms when the machine is busy.
It was `images LEFT JOIN versions ON ... AND is_default = 1 GROUP BY
rating`. The plan:
SCAN i USING COVERING INDEX images_folder
SEARCH v USING COVERING INDEX versions_judgement (image_id=?) LEFT-JOIN
USE TEMP B-TREE FOR GROUP BY
A probe of the index per image, then a sort of all 23,500 rows, to put
22,000 of them in slot zero.
Now the rated rows are grouped on their own (`rating != 0`: one pass over
`versions_judgement`, a sort of 1,200 rows), and slot zero is what is left
of the join's row count. That count is three index-only aggregates -- the
library size, the default versions, and the images holding one -- so an
image with no version is still unrated, and an image with two default
versions still counts twice, exactly as the join counted it:
SCAN versions USING COVERING INDEX versions_judgement (x3)
SCAN images USING COVERING INDEX images_folder
`count(DISTINCT image_id)` has its own statement because alone it reads the
distinct values off the index order; beside other aggregates SQLite builds a
temporary b-tree for it.
After: 1.2 ms. The histogram is the same on the reference library
([22364, 663, 19, 47, 115, 374]), and a new test compares it with the old
join on a catalog holding every state the schema allows: no version, only a
virtual copy, two defaults, ratings below zero and above five.
walk::scan_root enqueued an ExtractMetadata and a Thumbnail job for every
image it inserted or found changed. No handler claims either kind. The
walk is only reachable from the scan_local example today, so no real
catalog holds these rows, but it is the same leftover the remote scan
carried (#73) and it is what a local library would inherit.
Both debts are already recorded where their consumers look: an inserted
or changed image is written at metadata_state 1, which is the metadata
sweep's work list, and the thumbnail store answers for itself.
The tests that used job rows as the measure of "this image owes work"
now read metadata_state, which is the record the sweep actually uses;
the no-requeue test marks the first image read before the second scan,
so it still proves an unchanged neighbour is not put back in debt.
Refs #73
The reference catalog held 23,582 Thumbnail jobs, one per image, and
every scan re-coalesced all of them. Nothing has ever claimed that kind:
no JobHandler is registered for it on desktop or Android, and
dr_catalog::sync never merges another device's jobs in.
Thumbnails are owed by the store, not the queue. The grid's worker and
the thumbnail sweep both find their work by asking ThumbStore what it
lacks, and the store is shared between devices, so it is the only record
that knows another device already made one. A queue row was a second,
staler copy of that debt that grew with the library and was read by
nothing.
persist still writes the images and their remote identities in the one
transaction; it just no longer adds a row to jobs for each of them. The
two tests that asserted the rows existed become one that asserts a
repeated scan queues nothing.
Refs #73
The develop view reported a remote original on its way through the
error message, so it read "Could not load image" over "Downloading…".
It did so on every step along the roll, including a cached frame that
was ready within a tick, so each step flashed the error.
Waiting is now its own state. On the step, the grid's thumbnail of the
photograph stands in at once. Only when a transfer is really on the
wire does it dim under "Not on this device yet", with a line like
"Downloading — 12.4 of 38.0 MB" and a progress bar.
The bytes come from a new RemoteBackend::get_reporting. The Nextcloud
backend overrides it to read the body chunk by chunk; the default
reports once at the end. Progress is kept in the in-flight registry by
path, because a step usually lands on a frame the prefetcher is already
fetching. The catalog's file length stands in when the server sends no
Content-Length.
Opening a photograph from the library starts a download and a timer that
polls for it. Every step along the roll started another, and each one put
its result on screen when it landed, so a frame stepped past earlier
could arrive last and replace the one whose name was showing. Each open
now takes a generation number; a download that lands for an older
generation is recorded in the activity list (its bytes are cached) and
goes no further.
The outgoing session also stayed live until the new download landed.
Its sliders kept working, and a second step before the first landed
saved that session's edit under the new photograph's identity. The
session is now dropped as soon as its edit is saved.
The timeline beside the grid says *when* the view is. It does not say
how far through the library the view is, and scrubbing it jumps by
date. The bar gives the plain desktop answer: a thumb in proportion to
one screen of the whole grid, dragged or paged by clicking the track.
It reads the viewport that the rows are counted into, so it spans every
photograph and not only the loaded window of cells.
The Flickable keeps its id, its `interactive` arbitration with the
hold-to-pick-up and its pinch and zoom catchers. It now fills a
Rectangle that takes its place, and its stretch, in the grid's layout.
The page is several screens long, and nothing said so until something
had been scrolled. Same wrapping as the develop column; the bar sits at
the window's right edge, clear of the capped 680px form.
A tree longer than the panel looked, to a mouse, like the whole tree.
Same shape as the develop column: the Flickable fills a Rectangle that
takes its stretch, and a ScrollBar is drawn over its right edge. It is
drawn only when the tree overflows.
The column (histogram, compose, every adjustment group, history) runs
several screens past the window. A mouse without a wheel could only drag
the column's contents, and a drag that starts on a slider moves the
slider.
The Flickable now sits in a plain Rectangle with a ScrollBar beside it,
bound to its viewport. Nothing about how the column sizes itself
changes: the Flickable fills the Rectangle, and the Rectangle takes the
stretch the Flickable had in the layout under the group strip. The bar
is drawn over the column's right-hand 10px, so the mandated panel width
is not reduced. When the pointer is on the bar, the lit track covers
the value labels of the compose rows, which already sit flush against
the column's edge.
The film list bug gave no failure anywhere: the data was right, the
markup compiled, and the list rendered. Two guards now check that the
list can be walked to its end, both by driving input rather than by
reading markup.
tests/film_list_reaches_every_stock.rs runs in CI and needs no display.
It builds the real AppWindow on Slint's testing backend and gives it 28
stocks. It dispatches window events through the same routing a window
uses: popup, Flickables, arbitration. It then checks that the last stock
is on screen, that is, not clipped away:
- after Down past the end, and that Enter chooses it;
- after drags on the list;
- after a run of wheel events with a still pointer;
- after dragging the scrollbar thumb.
Element queries need the Slint compiler's debug tables, which build.rs
emitted only for the `automation` feature. It now emits them for every
debug build too. Release builds, the ones that ship, are unchanged. The
testing backend is a dev-dependency at the same pinned version the
automation feature already uses, so no new crate enters the lockfile.
The test is compiled out of release test runs.
film_reach in tools/manual/scenes.py is the same check on the recording
rig: a real X pointer from xdotool, the release build, and the demo
library. It makes no picture, so it adds nothing to the manual. It runs
with every recording, or alone with `record.sh LIBRARY film_reach`, and
fails the run if the last stock (Ilford HP5 Plus) is out of reach by
the wheel, a drag, the scrollbar or the keys.
Both have to add the popup's position back. The testing backend reports
anything inside a popup relative to the popup, and so does the
automation hook built on it. They take the popup's position from the
Film row and Slint's clamp into the window.
dtourolle