DarkRoom/ui/dr-ui/ui/histogram.slint

// TRACES: FR-DSP-7
// The live histogram, and what it says about clipping.
//
// **One plot, two readings, and a chip row to choose.** The panel draws either
// the frame the display is about to show (FR-DSP-7) or the sensor data the
// file holds (FR-CULL-3), from the same `HistogramView` and through the same
// traces. They are not two presentations of one measurement: the first is
// after white balance, the camera matrix and the whole tone chain, the second
// is before any of it on an axis of stops below sensor saturation, and
// FR-CULL-3 exists precisely because the first "systematically lies about what
// is recoverable in the raw". A culling decision needs the second; an export
// decision needs the first. Both are true.
//
// **So the words travel with the numbers.** The axis caption, the two clipping
// titles and the empty-state line are fields of the view rather than literals
// here, because they differ between the two readings — a raw saturation figure
// drawn under a heading saying Highlights would be mislabelled exactly where
// the difference matters.
//
// **Why this is hand-built when the rest of the column is generated.** The
// develop panel is built from operation capabilities, and a histogram is not an
// operation: it has no parameters, changes nothing about the photograph, and
// answers a question rather than asking one. It is an *instrument* — the same
// kind of thing as the zoom readout — so it is written, and ARCH §4.3a is
// untroubled by it: nothing here reads a parameter out of a descriptor.
//
// **Everything numeric was decided in Rust.** The heights arriving here are
// already 0..1 against a chosen scale, and the clipping figures are already
// strings. That is not tidiness — it is the only way the arithmetic is
// testable. A peak chosen in Slint could only be checked by looking at it, and
// a histogram that is the wrong shape looks exactly as plausible as one that is
// right (see `src/histogram.rs`).

import { Theme } from "theme.slint";
import { PanelHeading, Caption, Panel } from "widgets.slint";
import { Segmented } from "controls.slint";

// One counted frame, ready to draw.
//
// Heights are 0..1 with y up, darkest level first — the same convention the
// tone curve's samples use, so the two plots in this column cannot end up
// disagreeing about which way is up.
export struct HistogramView {
    // Whether a frame has been counted at all. Distinct from an all-zero
    // histogram, which would be a claim about an image rather than the absence
    // of one.
    available: bool,

    // The aggregate trace, drawn filled behind the three channels: Rec.709
    // luma for the display reading, the brightest channel for the raw one. In
    // both cases the single curve exposure is read off — which is why it is
    // named for its role in the plot rather than for either quantity.
    overall: [float],
    red: [float],
    green: [float],
    blue: [float],

    // Past the threshold worth reporting — see `CLIP_VISIBLE` in Rust.
    highlights-clipped: bool,
    shadows-clipped: bool,

    // How much, as text. NFR-A11Y-3: the marker beside these says *whether*
    // by hue and position, and these say *how much* in a form that survives
    // being unable to tell the two apart.
    highlights-label: string,
    shadows-label: string,

    // What the two clipping readouts are called. Different words for the two
    // readings — Shadows and Highlights describe a rendering, Black and
    // Saturated describe a sensor — and they belong to the reading rather than
    // to the panel for that reason.
    low-title: string,
    high-title: string,

    // What the axis is, or what it currently says: the chip row's hint. For
    // the raw reading this is the headroom figure, which is the answer
    // FR-CULL-3 is written for.
    //
    // Kept short in Rust, and that is a layout constraint: `FieldRow` draws
    // the hint as an unwrapped Text, and a Text that does not elide reports
    // the same *minimum* width as preferred. The develop column no longer
    // takes the largest of those — it is a mandated `panel-width` — which
    // makes this constraint sharper rather than softer: an over-long hint no
    // longer widens the column, it pushes the column's minimum past the width
    // it has and clips the panel instead.
    hint: string,

    // What the plot says when there is nothing to draw. Never "0%" and never
    // an empty plot — both are claims about a photograph nobody has counted.
    unavailable: string,
}

// One series, as a run of columns.
//
// Two shapes from one component because the two differ only in where the column
// starts: the luminance trace is filled from the baseline, the three channels
// are a line. Splitting them into two components would duplicate the column
// arithmetic, which is the part that has to stay identical or the four series
// would no longer be plotted against the same axis.
//
// One thin Rectangle per column: Slint has no polyline primitive, and this is
// the same construction `CurveEditor` uses a few files away.
component Trace inherits Rectangle {
    /// 0..1, y up.
    in property <[float]> heights;
    in property <color> ink;
    /// Filled from the baseline rather than drawn as a line.
    in property <bool> filled: false;
    in property <float> shade: 1.0;

    background: transparent;

    for h[i] in root.heights: Rectangle {
        // The next column's height, so a line segment can span the gap between
        // them. Without this a steep edge draws as a dotted stair rather than a
        // rising line — the same fix `CurveEditor` makes for the same reason.
        property <float> next: i + 1 < root.heights.length
            ? root.heights[i + 1] : h;

        x: parent.width * i / max(root.heights.length, 1);
        width: parent.width / max(root.heights.length, 1) + 1px;

        y: root.filled
            ? parent.height * (1.0 - h)
            : parent.height * (1.0 - max(h, self.next));
        height: root.filled
            ? parent.height * h
            // A floor, so a flat stretch of the trace is still a line and not a
            // gap in one.
            : max(parent.height * abs(self.next - h), 1.5px);

        background: root.ink;
        opacity: root.shade;
    }
}

// A clipping readout: a lit marker and a figure.
//
// **Two affordances for one fact, and NFR-A11Y-3 is why.** No status in this
// application is carried by hue alone, and clipping is the status most worth
// getting right — it is the one the histogram exists to warn about. So the
// marker appears and disappears (a shape, not a tint) and the figure states the
// magnitude in words. Either alone is enough to read it.
component ClipReadout inherits HorizontalLayout {
    in property <string> title;
    in property <string> figure;
    in property <bool> lit;

    spacing: Theme.gap-sm;

    Rectangle {
        width: 6px;
        height: 6px;
        y: (parent.height - self.height) / 2;
        border-radius: 1px;
        // `warn-ink`, the palette's one sanctioned hue: a blown highlight is a
        // caution about the photograph, which is exactly the kind of thing that
        // token exists to say instantly.
        background: Theme.warn-ink;
        visible: root.lit;
    }

    Caption { text: root.title; }
    Caption { text: root.figure; warn: root.lit; }
}

// TRACES: FR-DSP-7
export component HistogramPanel inherits Rectangle {
    /// The frame the display is about to show (FR-DSP-7).
    in property <HistogramView> data;
    /// The sensor data the file holds (FR-CULL-3).
    in property <HistogramView> raw-data;

    /// Which of the two is on the plot. 0 is the display reading.
    ///
    /// **Held here rather than pushed from Rust**, and for the reason
    /// `chosen-peaking` gives about the focus overlay: this is a way of
    /// *looking* rather than a property of a photograph. Someone culling three
    /// thousand frames switches to the raw reading once, and a mode that reset
    /// with each image would ask them to switch it three thousand times. Both
    /// views are pushed on every settled frame, so the choice needs no
    /// callback and no round trip — the raw one costs nothing to keep current,
    /// because it is computed once per photograph and cached.
    property <int> mode: 0;

    /// The reading currently drawn. Everything below reads this and not the
    /// two above it, so there is exactly one place the choice is made.
    property <HistogramView> shown: root.mode == 1 ? root.raw-data : root.data;

    // **This panel does not get a say in how wide the column is.**
    //
    // It used to: every panel in the develop column published a
    // `content-width`, the column took the largest, and that was the whole of
    // how the column was sized. The trouble is what the column is next to. A
    // sidebar measured from its contents takes its width out of the
    // photograph, so an axis label gaining a digit made the picture smaller,
    // and switching tools swapped one set of panels for another and moved the
    // image sideways on the screen.
    //
    // The column is `panel-width` now, stated once in `style.yaml`. A panel
    // that wants more than that clips, and the Flickable the column puts
    // around this is what makes the rest reachable. See the `_develop` note in
    // `style.yaml` for the trade.
    background: transparent;
    height: panel.preferred-height;

    panel := Panel {
        // Flat, like every panel in this column: the rule between it and its
        // neighbour belongs to the column that stacks them.
        flat: true;
        width: 100%;

        PanelHeading { text: "HISTOGRAM"; }

        // **Above the plot rather than below it**, because it says what the
        // plot *is*: a photographer glancing at a shape has to know which of
        // the two measurements they are looking at before they read it, not
        // after. Two chips wide, which fits the narrowest column the
        // application supports without the row setting the sidebar's width —
        // see `ChipGrid`.
        Segmented {
            label: "Measured on";
            hint: root.shown.hint;
            options: ["Display", "Raw"];
            selected: root.mode;
            columns: 2;
            picked(i) => { root.mode = i; }
        }

        Rectangle {
            // Tall enough to read a shape off and no taller. The column is the
            // photographer's instrument panel, and every pixel this takes is a
            // slider pushed below the fold.
            height: 84px;
            background: Theme.ground;
            border-width: 1px;
            border-color: Theme.rule;
            // The traces are positioned by fraction of the plot and a value at
            // the ceiling lands exactly on the border; clipping keeps the top
            // row of pixels inside the box rather than over its edge.
            clip: true;

            // Quarter gridlines, so a value can be placed on the axis without
            // counting. Same construction and same weight as the tone curve's,
            // because the two plots sit in one column and any difference
            // between them would read as meaning something.
            //
            // They read as quarters of whichever axis is showing: 64 output
            // levels for the display reading, four stops for the raw one. That
            // is why the axis is named in the chip row's hint rather than
            // labelled here — one set of gridlines cannot carry two scales,
            // and drawing numbers against them would make one of the two
            // readings wrong.
            for i in [1, 2, 3]: Rectangle {
                x: parent.width * i / 4;
                width: 1px;
                background: Theme.rule;
                opacity: 0.5;
            }

            // The aggregate first, so it sits behind: Rec.709 luma for the
            // display reading, the brightest channel for the raw one, and in
            // both cases the curve the three channels sit under. A filled area
            // drawn over a line hides it.
            Trace {
                width: 100%;
                height: 100%;
                heights: root.shown.overall;
                ink: Theme.plot-luma;
                filled: true;
            }

            // The channels over it, held back so three overlapping traces stay
            // legible where they cross — which on a neutral subject is
            // everywhere.
            Trace {
                width: 100%;
                height: 100%;
                heights: root.shown.red;
                ink: Theme.plot-red;
                shade: 0.85;
            }
            Trace {
                width: 100%;
                height: 100%;
                heights: root.shown.green;
                ink: Theme.plot-green;
                shade: 0.85;
            }
            Trace {
                width: 100%;
                height: 100%;
                heights: root.shown.blue;
                ink: Theme.plot-blue;
                shade: 0.85;
            }

            // The clipping markers, drawn on the plot's own ends.
            //
            // Here as well as in the figures below because this is where the
            // eye already is: a bar standing at the edge the tones are piling
            // against says which end has gone in the same glance that reads the
            // shape, and the figures underneath say how much.
            Rectangle {
                x: 0;
                width: 2px;
                height: 100%;
                background: Theme.warn-ink;
                visible: root.shown.shadows-clipped;
            }
            Rectangle {
                x: parent.width - self.width;
                width: 2px;
                height: 100%;
                background: Theme.warn-ink;
                visible: root.shown.highlights-clipped;
            }

            // Nothing rendered yet. Said rather than shown as an empty plot,
            // which would be a claim that the photograph has no tones in it.
            Caption {
                text: root.shown.unavailable;
                width: 100%;
                horizontal-alignment: center;
                y: (parent.height - self.height) / 2;
                visible: !root.shown.available;
            }
        }

        // Always drawn, never hidden. With no frame counted the figures read
        // "—", which is a different statement from "0%" and the true one: the
        // panel does not yet know. Hiding the row instead would move the
        // controls below it up and back down as each image opens.
        HorizontalLayout {
            ClipReadout {
                title: root.shown.low-title;
                figure: root.shown.shadows-label;
                lit: root.shown.shadows-clipped;
            }

            Rectangle { horizontal-stretch: 1; }

            ClipReadout {
                title: root.shown.high-title;
                figure: root.shown.highlights-label;
                lit: root.shown.highlights-clipped;
            }
        }
    }
}