Add Jellyfin 12.0 build target alongside 10.9

The plugin now multi-targets net8.0 (Jellyfin 10.9, ABI 10.9.0.0) and net10.0
(Jellyfin 12.0, ABI 12.0.0.0) from one source tree, and each release ships both
packages.

TaskTriggerInfo.Type became a TaskTriggerInfoType enum in 12.0, which is the
only source-level break; it is handled with a NET10_0_OR_GREATER switch. CA1873
is disabled in the ruleset alongside CA1848, which it supersedes.

build.yaml stays the 10.9 config and the 12.0 one is derived from it at build
time, so the two cannot drift apart. Both manifest entries are prepended per
release with the 12.0 one first: Jellyfin keeps entries whose targetAbi is <=
the server version and takes the first of the highest version, so a 12.0 server
picks the 12.0 build while a 10.9 server never sees it.

The builder image now carries the .NET 10 SDK with the .NET 8 SDK alongside it.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

.gitea/workflows/build.yaml

@@ -32,21 +32,51 @@ jobs:
       - name: Run tests
         run: dotnet test Jellyfin.Plugin.Jellypod.sln --no-build --configuration Release --verbosity normal
 
-      - name: Build Jellyfin Plugin
+      - name: Build plugin for Jellyfin 10.9 (net8.0)
-        id: jprm
+        id: jprm_jf109
         run: |
-          mkdir -p artifacts
+          mkdir -p ./artifacts/jf10.9
-          jprm --verbosity=debug plugin build .
+          jprm --verbosity=debug plugin build . --output ./artifacts/jf10.9
 
-          # Find the generated zip file
+          ARTIFACT=$(find ./artifacts/jf10.9 -name "*.zip" -type f -print -quit)
-          ARTIFACT=$(find . -name "*.zip" -type f -print -quit)
+          RENAMED="./artifacts/jf10.9/$(basename "${ARTIFACT}" .zip)_jf10.9.zip"
-          echo "artifact=${ARTIFACT}" >> $GITHUB_OUTPUT
+          mv "${ARTIFACT}" "${RENAMED}"
-          echo "Found artifact: ${ARTIFACT}"
+          echo "artifact=${RENAMED}" >> $GITHUB_OUTPUT
+          echo "Found artifact: ${RENAMED}"
 
-      - name: Upload build artifact
+      - name: Retarget build config at Jellyfin 12.0 (net10.0)
+        run: |
+          sed -i \
+            -e 's/^targetAbi:.*/targetAbi: "12.0.0.0"/' \
+            -e 's/^framework:.*/framework: "net10.0"/' \
+            -e 's/^dotnet_framework:.*/dotnet_framework: "net10.0"/' \
+            build.yaml
+          cat build.yaml
+
+      - name: Build plugin for Jellyfin 12.0 (net10.0)
+        id: jprm_jf12
+        run: |
+          mkdir -p ./artifacts/jf12
+          jprm --verbosity=debug plugin build . --output ./artifacts/jf12
+
+          ARTIFACT=$(find ./artifacts/jf12 -name "*.zip" -type f -print -quit)
+          RENAMED="./artifacts/jf12/$(basename "${ARTIFACT}" .zip)_jf12.zip"
+          mv "${ARTIFACT}" "${RENAMED}"
+          echo "artifact=${RENAMED}" >> $GITHUB_OUTPUT
+          echo "Found artifact: ${RENAMED}"
+
+      - name: Upload build artifact (Jellyfin 10.9)
         uses: actions/upload-artifact@v3
         with:
-          name: jellypod-plugin
+          name: jellypod-plugin-jf10.9
-          path: ${{ steps.jprm.outputs.artifact }}
+          path: ${{ steps.jprm_jf109.outputs.artifact }}
+          retention-days: 30
+          if-no-files-found: error
+
+      - name: Upload build artifact (Jellyfin 12.0)
+        uses: actions/upload-artifact@v3
+        with:
+          name: jellypod-plugin-jf12
+          path: ${{ steps.jprm_jf12.outputs.artifact }}
           retention-days: 30
           if-no-files-found: error

.gitea/workflows/release.yaml

@@ -39,6 +39,17 @@ jobs:
           sed -i "s/^version:.*/version: \"${VERSION}\"/" build.yaml
           cat build.yaml
 
+      - name: Generate Jellyfin 12.0 build config
+        run: |
+          # build.yaml is the Jellyfin 10.9 (net8.0) config; derive the
+          # Jellyfin 12.0 (net10.0) one from it so the two cannot drift apart.
+          sed \
+            -e 's/^targetAbi:.*/targetAbi: "12.0.0.0"/' \
+            -e 's/^framework:.*/framework: "net10.0"/' \
+            -e 's/^dotnet_framework:.*/dotnet_framework: "net10.0"/' \
+            build.yaml > build.jf12.yaml
+          cat build.jf12.yaml
+
       - name: Restore dependencies
         run: dotnet restore Jellyfin.Plugin.Jellypod.sln
 
@@ -48,25 +59,39 @@ jobs:
       - name: Run tests
         run: dotnet test Jellyfin.Plugin.Jellypod.sln --no-build --configuration Release --verbosity normal
 
-      - name: Build Jellyfin Plugin
+      - name: Build plugin for Jellyfin 10.9 (net8.0)
-        id: jprm
+        id: jprm_jf109
         run: |
-          mkdir -p artifacts
+          mkdir -p ./artifacts/jf10.9
-          jprm --verbosity=debug plugin build ./
+          jprm --verbosity=debug plugin build . --output ./artifacts/jf10.9
 
-          # Find the generated zip file
+          ARTIFACT=$(find ./artifacts/jf10.9 -name "*.zip" -type f -print -quit)
-          ARTIFACT=$(find . -name "*.zip" -type f -print -quit)
+          RENAMED="./artifacts/jf10.9/$(basename "${ARTIFACT}" .zip)_jf10.9.zip"
-          ARTIFACT_NAME=$(basename "${ARTIFACT}")
+          mv "${ARTIFACT}" "${RENAMED}"
-          echo "artifact=${ARTIFACT}" >> $GITHUB_OUTPUT
+          echo "artifact=${RENAMED}" >> $GITHUB_OUTPUT
-          echo "artifact_name=${ARTIFACT_NAME}" >> $GITHUB_OUTPUT
+          echo "artifact_name=$(basename "${RENAMED}")" >> $GITHUB_OUTPUT
-          echo "Found artifact: ${ARTIFACT}"
+          echo "checksum=$(md5sum "${RENAMED}" | awk '{print $1}')" >> $GITHUB_OUTPUT
+          echo "Found artifact: ${RENAMED}"
 
-      - name: Calculate checksum
+      - name: Build plugin for Jellyfin 12.0 (net10.0)
-        id: checksum
+        id: jprm_jf12
         run: |
-          CHECKSUM=$(md5sum "${{ steps.jprm.outputs.artifact }}" | awk '{print $1}')
+          # jprm always reads build.yaml, so swap the 12.0 config in for this build.
-          echo "checksum=${CHECKSUM}" >> $GITHUB_OUTPUT
+          cp build.yaml build.jf10.9.yaml
-          echo "MD5 Checksum: ${CHECKSUM}"
+          cp build.jf12.yaml build.yaml
+
+          mkdir -p ./artifacts/jf12
+          jprm --verbosity=debug plugin build . --output ./artifacts/jf12
+
+          mv build.jf10.9.yaml build.yaml
+
+          ARTIFACT=$(find ./artifacts/jf12 -name "*.zip" -type f -print -quit)
+          RENAMED="./artifacts/jf12/$(basename "${ARTIFACT}" .zip)_jf12.zip"
+          mv "${ARTIFACT}" "${RENAMED}"
+          echo "artifact=${RENAMED}" >> $GITHUB_OUTPUT
+          echo "artifact_name=$(basename "${RENAMED}")" >> $GITHUB_OUTPUT
+          echo "checksum=$(md5sum "${RENAMED}" | awk '{print $1}')" >> $GITHUB_OUTPUT
+          echo "Found artifact: ${RENAMED}"
 
       - name: Create Release
         id: create_release
@@ -84,7 +109,7 @@ jobs:
             -H "Authorization: token ${GITEA_TOKEN}" \
             -H "Content-Type: application/json" \
             "${GITEA_URL}/api/v1/repos/${REPO_OWNER}/${REPO_NAME}/releases" \
-            -d "$(jq -n --arg tag "$VERSION" --arg name "Release $VERSION" --arg body "Jellypod Jellyfin Plugin. See attached files for plugin installation." '{tag_name: $tag, name: $name, body: $body, draft: false, prerelease: false}')")
+            -d "$(jq -n --arg tag "$VERSION" --arg name "Release $VERSION" --arg body "Jellypod Jellyfin Plugin. Install the _jf10.9 build on Jellyfin 10.9.x and the _jf12 build on Jellyfin 12.0 or newer." '{tag_name: $tag, name: $name, body: $body, draft: false, prerelease: false}')")
 
           HTTP_CODE=$(echo "$RESPONSE" | tail -n1)
           BODY=$(echo "$RESPONSE" | sed '$d')
@@ -99,21 +124,19 @@ jobs:
             exit 1
           fi
 
-          # Upload plugin artifact
+          upload_asset() {
-          echo "Uploading plugin artifact..."
+            echo "Uploading $2 ..."
             curl -f -X POST \
               -H "Authorization: token ${GITEA_TOKEN}" \
-            -H "Content-Type: application/zip" \
+              -H "Content-Type: $3" \
-            --data-binary "@${{ steps.jprm.outputs.artifact }}" \
+              --data-binary "@$1" \
-            "${GITEA_URL}/api/v1/repos/${REPO_OWNER}/${REPO_NAME}/releases/${RELEASE_ID}/assets?name=${{ steps.jprm.outputs.artifact_name }}"
+              "${GITEA_URL}/api/v1/repos/${REPO_OWNER}/${REPO_NAME}/releases/${RELEASE_ID}/assets?name=$2"
+          }
 
-          # Upload build.yaml
+          upload_asset "${{ steps.jprm_jf109.outputs.artifact }}" "${{ steps.jprm_jf109.outputs.artifact_name }}" "application/zip"
-          echo "Uploading build.yaml..."
+          upload_asset "${{ steps.jprm_jf12.outputs.artifact }}" "${{ steps.jprm_jf12.outputs.artifact_name }}" "application/zip"
-          curl -f -X POST \
+          upload_asset build.yaml build.yaml "application/x-yaml"
-            -H "Authorization: token ${GITEA_TOKEN}" \
+          upload_asset build.jf12.yaml build.jf12.yaml "application/x-yaml"
-            -H "Content-Type: application/x-yaml" \
-            --data-binary "@build.yaml" \
-            "${GITEA_URL}/api/v1/repos/${REPO_OWNER}/${REPO_NAME}/releases/${RELEASE_ID}/assets?name=build.yaml"
 
           echo "Release created successfully!"
           echo "View at: ${GITEA_URL}/${REPO_OWNER}/${REPO_NAME}/releases/tag/${{ steps.get_version.outputs.version }}"
@@ -126,10 +149,8 @@ jobs:
           REPO_NAME="${{ github.event.repository.name }}"
           GITEA_URL="${{ github.server_url }}"
           VERSION="${{ steps.get_version.outputs.version_number }}"
-          CHECKSUM="${{ steps.checksum.outputs.checksum }}"
-          ARTIFACT_NAME="${{ steps.jprm.outputs.artifact_name }}"
           TIMESTAMP=$(date -u +"%Y-%m-%dT%H:%M:%SZ")
-          DOWNLOAD_URL="${GITEA_URL}/${REPO_OWNER}/${REPO_NAME}/releases/download/${{ steps.get_version.outputs.version }}/${ARTIFACT_NAME}"
+          RELEASE_URL="${GITEA_URL}/${REPO_OWNER}/${REPO_NAME}/releases/download/${{ steps.get_version.outputs.version }}"
 
           # Configure git
           git config user.name "Gitea Actions"
@@ -139,14 +160,23 @@ jobs:
           git fetch origin master
           git checkout master
 
-          # Update manifest.json - prepend new version to versions array
+          # Prepend both ABI entries for this version. Jellyfin keeps only the
+          # entries whose targetAbi is <= the server version and then takes the
+          # first of the highest version, so the 12.0 entry must come first: a
+          # 12.0 server sees both and picks it, a 10.9 server never sees it.
           jq --arg ver "${VERSION}" \
              --arg changelog "Release ${VERSION}" \
-             --arg abi "10.9.0.0" \
+             --arg abi12 "12.0.0.0" \
-             --arg url "${DOWNLOAD_URL}" \
+             --arg url12 "${RELEASE_URL}/${{ steps.jprm_jf12.outputs.artifact_name }}" \
-             --arg checksum "${CHECKSUM}" \
+             --arg checksum12 "${{ steps.jprm_jf12.outputs.checksum }}" \
+             --arg abi109 "10.9.0.0" \
+             --arg url109 "${RELEASE_URL}/${{ steps.jprm_jf109.outputs.artifact_name }}" \
+             --arg checksum109 "${{ steps.jprm_jf109.outputs.checksum }}" \
              --arg ts "${TIMESTAMP}" \
-             '.[0].versions = [{version: $ver, changelog: $changelog, targetAbi: $abi, sourceUrl: $url, checksum: $checksum, timestamp: $ts}] + .[0].versions' \
+             '.[0].versions = [
+                {version: $ver, changelog: $changelog, targetAbi: $abi12, sourceUrl: $url12, checksum: $checksum12, timestamp: $ts},
+                {version: $ver, changelog: $changelog, targetAbi: $abi109, sourceUrl: $url109, checksum: $checksum109, timestamp: $ts}
+              ] + .[0].versions' \
              manifest.json > manifest.tmp && mv manifest.tmp manifest.json
 
           # Commit and push

.gitignore

@@ -3,3 +3,4 @@ obj/
 .vs/
 .idea/
 artifacts
+build.jf12.yaml

Dockerfile.build

@@ -1,4 +1,4 @@
-FROM mcr.microsoft.com/dotnet/sdk:8.0
+FROM mcr.microsoft.com/dotnet/sdk:10.0
 
 # Install Python, Node.js, and tools
 RUN apt-get update && apt-get install -y \
@@ -10,6 +10,12 @@ RUN apt-get update && apt-get install -y \
     npm \
     && rm -rf /var/lib/apt/lists/*
 
+# The .NET 10 SDK builds the net10.0 (Jellyfin 12.0) target; the .NET 8 SDK is
+# needed alongside it for the net8.0 (Jellyfin 10.9) target.
+RUN curl -sSL https://dot.net/v1/dotnet-install.sh -o /tmp/dotnet-install.sh \
+    && bash /tmp/dotnet-install.sh --channel 8.0 --install-dir /usr/share/dotnet --no-path \
+    && rm /tmp/dotnet-install.sh
+
 # Install JPRM
 RUN pip install --break-system-packages jprm
 

Jellyfin.Plugin.Jellypod/Jellyfin.Plugin.Jellypod.csproj

@@ -1,7 +1,7 @@
 <Project Sdk="Microsoft.NET.Sdk">
 
   <PropertyGroup>
-    <TargetFramework>net8.0</TargetFramework>
+    <TargetFrameworks>net8.0;net10.0</TargetFrameworks>
     <RootNamespace>Jellyfin.Plugin.Jellypod</RootNamespace>
     <GenerateDocumentationFile>true</GenerateDocumentationFile>
     <TreatWarningsAsErrors>true</TreatWarningsAsErrors>
@@ -11,7 +11,8 @@
     <CopyLocalLockFileAssemblies>true</CopyLocalLockFileAssemblies>
   </PropertyGroup>
 
-  <ItemGroup>
+  <!-- Jellyfin 10.9 (net8.0) -->
+  <ItemGroup Condition="'$(TargetFramework)' == 'net8.0'">
     <PackageReference Include="Jellyfin.Controller" Version="10.9.11">
       <ExcludeAssets>runtime</ExcludeAssets>
     </PackageReference>
@@ -22,6 +23,18 @@
     <PackageReference Include="System.ServiceModel.Syndication" Version="8.0.0" />
   </ItemGroup>
 
+  <!-- Jellyfin 12.0 (net10.0) -->
+  <ItemGroup Condition="'$(TargetFramework)' == 'net10.0'">
+    <PackageReference Include="Jellyfin.Controller" Version="12.0.0">
+      <ExcludeAssets>runtime</ExcludeAssets>
+    </PackageReference>
+    <PackageReference Include="Jellyfin.Model" Version="12.0.0">
+      <ExcludeAssets>runtime</ExcludeAssets>
+    </PackageReference>
+    <PackageReference Include="Microsoft.Extensions.Http" Version="10.0.11" />
+    <PackageReference Include="System.ServiceModel.Syndication" Version="10.0.11" />
+  </ItemGroup>
+
   <ItemGroup>
     <PackageReference Include="SerilogAnalyzer" Version="0.15.0" PrivateAssets="All" />
     <PackageReference Include="StyleCop.Analyzers" Version="1.2.0-beta.556" PrivateAssets="All" />

Jellyfin.Plugin.Jellypod/ScheduledTasks/PodcastUpdateTask.cs

@@ -150,7 +150,11 @@ public class PodcastUpdateTask : IScheduledTask
         {
             new TaskTriggerInfo
             {
+#if NET10_0_OR_GREATER
+                Type = TaskTriggerInfoType.IntervalTrigger,
+#else
                 Type = TaskTriggerInfo.TriggerInterval,
+#endif
                 IntervalTicks = TimeSpan.FromHours(intervalHours).Ticks
             }
         };

README.md

@@ -10,6 +10,19 @@ Add this repository URL in Jellyfin (Dashboard → Plugins → Repositories):
 https://gitea.tourolle.paris/dtourolle/jellypod/raw/branch/master/manifest.json
 ```
 
+## Supported Jellyfin Versions
+
+Jellypod is released as two builds from the same source. The repository manifest
+lists both, and Jellyfin picks the right one for your server automatically:
+
+| Jellyfin server | Build          | Target framework |
+| --------------- | -------------- | ---------------- |
+| 10.9.x          | `*_jf10.9.zip` | .NET 8           |
+| 12.0 and newer  | `*_jf12.zip`   | .NET 10          |
+
+If you install manually, download the build matching your server — a build
+installed on the wrong server will fail to load.
+
 ## Features
 
 - Browse and subscribe to podcasts
@@ -92,7 +105,9 @@ ffmpeg -i "$INPUT" -c:a aac -b:a 128k "$OUTPUT"
 
 ### Manual Installation
 
-1. Download the latest release from [Releases](https://gitea.tourolle.paris/dtourolle/jellypod/releases)
+1. Download the latest release from [Releases](https://gitea.tourolle.paris/dtourolle/jellypod/releases),
+   picking `jellypod_<version>_jf10.9.zip` for Jellyfin 10.9.x or
+   `jellypod_<version>_jf12.zip` for Jellyfin 12.0 and newer
 2. Extract the contents to your Jellyfin plugins directory:
    - **Linux**: `~/.local/share/jellyfin/plugins/Jellypod/`
    - **Windows**: `%LOCALAPPDATA%\jellyfin\plugins\Jellypod\`
@@ -103,15 +118,32 @@ ffmpeg -i "$INPUT" -c:a aac -b:a 128k "$OUTPUT"
 
 #### Requirements
 
-- [.NET SDK 8.0](https://dotnet.microsoft.com/en-us/download/dotnet/8.0)
+- [.NET SDK 8.0](https://dotnet.microsoft.com/en-us/download/dotnet/8.0) for the Jellyfin 10.9 build
+- [.NET SDK 10.0](https://dotnet.microsoft.com/en-us/download/dotnet/10.0) for the Jellyfin 12.0 build
 
 #### Build
 
 ```bash
-dotnet build
+dotnet build                      # both targets
+dotnet build -f net8.0            # Jellyfin 10.9 only
+dotnet build -f net10.0           # Jellyfin 12.0 only
 ```
 
-The plugin DLL will be in `Jellyfin.Plugin.Jellypod/bin/Debug/net8.0/`.
+The plugin DLL will be in `Jellyfin.Plugin.Jellypod/bin/Debug/net8.0/` or
+`Jellyfin.Plugin.Jellypod/bin/Debug/net10.0/`.
+
+#### Packaging
+
+`build.yaml` is the [jprm](https://github.com/oddstr13/jellyfin-plugin-repository-manager)
+config for the Jellyfin 10.9 build. The Jellyfin 12.0 config is derived from it
+at release time, so the two cannot drift apart:
+
+```bash
+sed -e 's/^targetAbi:.*/targetAbi: "12.0.0.0"/' \
+    -e 's/^framework:.*/framework: "net10.0"/' \
+    -e 's/^dotnet_framework:.*/dotnet_framework: "net10.0"/' \
+    build.yaml > build.jf12.yaml
+```
 
 ## Development
 

jellyfin.ruleset

@@ -100,6 +100,8 @@
         <Rule Id="CA1308" Action="None" />
         <!-- disable warning CA1848: Use the LoggerMessage delegates -->
         <Rule Id="CA1848" Action="None" />
+        <!-- disable warning CA1873: Avoid potentially expensive logging -->
+        <Rule Id="CA1873" Action="None" />
         <!-- disable warning CA2101: Specify marshaling for P/Invoke string arguments -->
         <Rule Id="CA2101" Action="None" />
         <!-- disable warning CA2234: Pass System.Uri objects instead of strings -->

manifest.json

@@ -8,6 +8,14 @@
     "category": "General",
     "imageUrl": "https://gitea.tourolle.paris/dtourolle/jellypod/raw/branch/master/Jellyfin.Plugin.Jellypod/Images/channel-icon.jpg",
     "versions": [
+      {
+        "version": "1.0.10",
+        "changelog": "Release 1.0.10",
+        "targetAbi": "10.9.0.0",
+        "sourceUrl": "https://gitea.tourolle.paris/dtourolle/jellypod/releases/download/v1.0.10/jellypod_1.0.10.0.zip",
+        "checksum": "37509ee316e5731b7dcfef394099ac53",
+        "timestamp": "2026-01-11T09:06:37Z"
+      },
       {
         "version": "1.0.9",
         "changelog": "Release 1.0.9",