fix(sync): queue a watch position the server could not be told about (DR-154)

sync_queue and its drain (DR-131) were built, tested and running, but the
stop-report path never fed them, so closing a video while the server was
unreachable lost the resume point outright.

HybridRepository::report_playback_stopped is a bare pass-through to the
online repository ("Playback reporting goes directly to server"), and on
failure the error surfaced to a frontend catch whose own comment read
"Server error - could queue, but for now just log". Both producers that
would have queued it -- PlaybackReporter::queue_for_sync in Rust and
syncService.queuePlaybackProgress on the frontend -- have no callers on
the playback path. user_data.pending_sync was dutifully set to 1, but
nothing drains that flag for positions the way favourites do (DR-120).

The command layer now enqueues a report_playback_stopped row whenever the
push fails; the existing drain already parses and replays that operation.

The pending row for an item is superseded in place rather than appended
to: progress is reported every 10s, so a server that stays down would
otherwise add a row per tick, all obsoleted by the newest -- the
unbounded queue DR-131 exists to prevent. Only pending/failed rows are
superseded, since reviving an abandoned row restores that same growing
counter. Queueing is best-effort and never fails the command: the local
position is already saved, so a failed queue write must not be reported
as a lost position.

Verified red->green in the jellytau-builder image: the four new tests
failed to compile (enqueue_playback_stopped not found) before the fix.
Full Rust suite passes (627 tests), cargo fmt clean, clippy adds no new
warnings; frontend suite (933) and svelte-check also clean.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

docs/requirements.md

@@ -316,6 +316,7 @@ Internal architecture, components, and application logic.
 | DR-151 | The player's video SurfaceView actually reaches the view hierarchy. `JellyTauPlayer.setActivity()` had zero callers, so `currentActivity` was always null and `autoAttachSurface()` returned at "Cannot attach surface - no Activity reference". The surface was created and handed to ExoPlayer but never added to the content view, so native video decoded to a surface that was never on screen — independent of any webview transparency. `MainActivity.onCreate` now supplies the reference, which also revives PiP on the video path: `canEnterPip()` gates on `isVideoSurfaceAttached()`, which had been permanently false | Playback | UR-003, UR-041 | Done |
 | DR-152 | Platform playback facilities are reported by Rust, not sniffed from the user agent. `webviewAudio.ts` re-derived "does this platform have a native audio backend" by matching `navigator.userAgent` against `android`/`linux` — a second copy of the `cfg!` gate the backends are compiled under, free to drift from it. `player_get_capabilities` now returns `usesWebviewAudio` and `supportsNativeVideo` from the same cfg gates, and the frontend consumes them; the settings toggle for native video is hidden entirely where the platform cannot support it | Player | UR-003, UR-005 | Done |
 | DR-153 | The git tag is the single source of truth for a release version. The version lived in four files (`package.json`, `tauri.conf.json`, `Cargo.toml`, `Cargo.lock`) that had to be hand-edited in lockstep, and CI's release job rewrote exactly one of them — so a tagged build produced an installer named for the tag wrapped around package metadata naming the previous release, while the Linux job had no version step at all and shipped whatever was committed. `scripts/set-version.sh` writes all four from one argument and is the only thing that does; every release job calls it with the tag. The Android `versionCode` is derived in the same place as `1000 + major*10000 + minor*100 + patch`, which is monotonic in semver order and clears the 1000 floor already installed in the field — a lower code than the installed one makes Android refuse the update. A prerelease suffix is stripped before that arithmetic, which would otherwise abort the script, and a non-tag ref (CI passes `${GITHUB_REF#refs/tags/}` unconditionally) falls back to `git describe` rather than failing a branch build | Build | - | Done |
+| DR-154 | A watch position that cannot reach the server is queued, not dropped. `sync_queue` and its drain (DR-131) were built, tested and running, but the stop-report path never fed them: `HybridRepository::report_playback_stopped` is a bare pass-through to the online repository ("Playback reporting goes directly to server"), and on failure the error surfaced to a frontend `catch` whose own comment read "Server error - could queue, but for now just log". Both producers that *would* have queued it — `PlaybackReporter::queue_for_sync` in Rust and `syncService.queuePlaybackProgress` on the frontend — have no callers on the playback path, so closing a video while the server was unreachable lost the resume point outright even though `user_data.pending_sync` was dutifully set to 1 and nothing ever drains that flag for positions (unlike favourites, DR-120). The command layer now enqueues a `report_playback_stopped` row whenever the push fails, which the existing drain already knows how to parse and replay. The pending row for an item is **superseded in place** rather than appended to: progress is reported every 10s, so a server that stays down would otherwise add a row per tick, all of them obsoleted by the newest — the unbounded queue DR-131 exists to prevent. Only `pending`/`failed` rows are superseded, because an `abandoned` row has been given up on and reviving it would restore that same growing counter. Queueing is best-effort and never fails the command: the local position is already saved, so a failed *queue* write must not be reported as a lost position | Backend | UR-025, UR-002 | Done |
 | DR-143 | Flipping the offline downloaded-only gate actually re-queries the listing. The gate (DR-078) is a process-wide flag in Rust consulted only *while a query runs*, but no library surface re-queried when its inputs changed: `useServerReachabilityReload` fires only on the offline → **online** transition, and `GenericMediaListPage`, `GenericGenreBrowser` and the favourites page never even called its `checkServerReachability`. So going offline left the full server catalog on screen under a now-closed gate, and toggling "Show all server media" only greyed cards — `MediaCard.isServerOnly` is a pure frontend derivation that updates instantly — without adding or removing a single row. The filter therefore read as "shows everything until I filter, then greys some of it" while the backend gate was correct and simply never exercised. `catalogFilterVersion` is the refetch signal: `pushCatalogVisibility` now awaits `set_show_server_catalog` and bumps the version only **after** the backend accepts the new flag, since a reload racing the push would re-query under the old gate and undo itself. A failed push clears `lastIncludeCatalog` instead of latching it, so the next identical transition is retried rather than skipped as a no-op and left permanently disagreeing with the backend. `useOfflineFilterReload` subscribes pages to that signal, skipping the value they already loaded under; it is wired into both generic list components and the movies/music/tv/favourites landing pages and the `/library/[id]` detail page | UI | UR-052 | Done |
 | DR-135 | A download's media type comes from the item, not a default. `download_item` — the path a media card uses to queue an item while offline — never records `media_type`, and the reconnect resolver read that NULL as `'audio'`, so a **movie** queued from a card had its URL resolved by `get_audio_stream_url`. The file that landed on disk was an audio-only transcode, which is why a "downloaded" film could never play offline no matter how the path or protocol was fixed. The resolver now falls back to the item's own `item_type` (`VIDEO_ITEM_TYPES` in Rust, so the frontend never learns which types are video) and only defaults to audio when the item is not cached locally. An explicit `media_type` on the row still wins | Downloads | UR-071, UR-052 | Done |
 | DR-136 | Rows already downloaded under the audio default are repaired, not just prevented. They are identifiable after the fact — no `media_type`, but a video item — so on reconnect they are reset to `pending` with their audio URL cleared and re-resolved by DR-135's corrected logic, overwriting the audio file in place. Without this the fix is invisible to anyone who had already queued a film: the row still reads "downloaded" and still fails to play. Rows carrying an explicit `media_type` and genuine audio downloads are left untouched | Downloads | UR-071 | Done |
@@ -549,6 +550,7 @@ Internal architecture, components, and application logic.
 | UT-148 | Forcing a transcode from the client: an undecodable default track forces one, a decodable track does not, the default track decides rather than the first, the first decides when nothing is marked default, and neither an audio-less source nor an unnamed codec is second-guessed | DR-149 | Done |
 | UT-149 | `createAdapter` returns the native adapter only when Rust reports native AND `experimentalNativeVideo` is on; the flag off forces HTML5 even when Rust says native, and the flag on never promotes a platform Rust reported as HTML5 | DR-150 | Done |
 | UT-150 | `set-version.sh` stamps all four manifests without touching dependency versions, and the Android versionCode is monotonic across an upgrade sequence, clears the 1000 floor, and survives a prerelease suffix | DR-153 | Done |
+| UT-151 | An unreportable stop lands in the queue and is pushed by the existing drain; re-queueing the same item supersedes the earlier position rather than adding a row, distinct items keep their own positions, and an abandoned row is not revived by a later report | DR-154 | Done |
 | UT-142 | The audio codecs offered for video direct play: a Dolby device's real `MediaCodecList` output drops `ac3`/`eac3`, AMR and raw PCM are dropped too, a fully-supported list is passed through untouched, a list with nothing decodable still claims `aac`, and stray spacing or casing does not decide whether the user gets sound | DR-148 | Done |
 | UT-143 | Subtitle URLs resolve to plain strings before they reach the markup (never a Promise), unresolvable tracks are dropped, a stale selection collapses to "Off", and a server-default track is never auto-selected | UR-020, DR-023 | Done |
 | UT-144 | VideoPlayer actually renders `<track kind="subtitles">` children carrying `data-stream-index`, with no `default` attribute and no async `getSubtitleUrl()` bound to `src` | UR-020, DR-023 | Done |