11d9d760d8b13983bddd94d4d05bd6462c5b1bb5
5
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 dtourolle
|
11d9d760d8 |
feat(player): native video on Linux, and one contract for every player (v0.11.0)
mpv now decodes video on Linux, drawn into a framebuffer we own and blitted
into the default vbox's draw handler. Tauri's widget tree is untouched, so an
upgrade that assumes its own layout cannot invalidate this. Direct play means
the original file, hardware decoding, and no server transcode at all — where
previously every desktop video was re-encoded to h264 for the browser engine,
whatever the file actually was. Off by default: JELLYTAU_NATIVE_VIDEO=1.
That settles finding 2 of playback-backend-unification.md — "native video
cannot be composited with a Tauri webview" — by demonstration rather than
argument, on X11 and Wayland both.
Turning it on exposed nine defects, none of them mpv's. Each was the same
mistake in a different place: a capability written down as a compile-time fact
about the platform, or a state asserted instead of confirmed.
DR-238/246 a seek routed by the stream's container rather than by what the
engine could do with it - correct only while one player handled
those streams, silent the moment another did
DR-239 a property handled but never observed, so the play/pause button
waited for an event that could not arrive
DR-240 fullscreen expanding the document while the window stayed put
DR-241 a seek issued before the engine had a file, failed, and discarded
- which is why resume began at zero
DR-247 a Linux-only gate outliving the caller that made it Linux-only,
breaking the Android build outright
DR-250 a stop aimed at whichever renderer bookkeeping believed was in
charge, missing the one actually making sound
DR-251 a duration of zero believed, leaving the seek bar no scale
DR-252 a junk float converted to a Duration, panicking the backend the
instant a length-less stream appeared
So the MediaPlayer contract (DR-242 … DR-247): `open` carries a start position,
so no caller sequences load-then-seek and none can race an engine's load;
`seek` states a destination and leaves in-place-versus-re-open to the engine;
`snapshot` is one coherent read; and `Phase::Opening` names the window where
intent used to be lost. One conformance suite runs against every engine —
FakePlayer and mpv under cargo test, ExoPlayer instrumented on a device — so an
engine is either correct or visibly failing.
Two of the nine were introduced during this work and caught on hardware, not by
any suite: an over-broad capability that grouped ExoPlayer with mpv, and the
Duration panic. The suites test engines that behave. That is recorded in
docs/native-player-verification.md, which asks for the exact action sequences
that found them.
Verified: all automated gates, conformance (mpv 9/9, legacy 8/9 by design,
ExoPlayer 7/7 on device), and manual desktop and Android passes on real
hardware.
Known open and deliberately shipped: resume reads local progress and never the
server's; the background-audio handoff still declares a state swap it does not
confirm (the symptom is now impossible, the race is not); and `bun run
android:dev` builds an APK carrying the release application id, whose failure
message advises an uninstall that would destroy app data. Fix that last one
before anyone else builds for Android.
Squashed from worktree-linux-native-video, which keeps the per-defect history.
|
||
|
dtourolle
|
4c9361d020 |
fix(android): stop backing up credentials no key can ever open
The app's data dir was eligible for Google cloud backup: the manifest set neither allowBackup nor any extraction rules, so the SQLite catalogue (library metadata, watch history) and the jellytau_secure_prefs credential blob were shipped to the user's Google account. Restoring that is worse than not having it — SecureStorage encrypts under an Android Keystore key, and Keystore keys are never backed up, so a restored install gets ciphertext with nothing to open it and fails auth silently while looking signed in. Backup and device-to-device transfer are both turned off. allowBackup ="false" covers API 24-30 outright and kills cloud backup on 31+; it does NOT stop D2D there, so @xml/data_extraction_rules excludes every domain from both channels. Nothing is lost: the catalogue is a rebuildable mirror of the Jellyfin server, and watch state lives on the server. The credential-load path degrades instead of erroring, because a device can still arrive at undecryptable ciphertext (an older install's backup, a Keystore key invalidated by a lockscreen change). Both backends now distinguish "nothing stored" from "stored but unreadable" and answer the second as the first: CredentialStore::load_credentials_file logs and returns an empty map rather than CredentialError::Encryption — which storage_get_access_token was turning into a hard Err and storage_get_active_session into a warning — and SecureStorage.getCredential discards the dead blob so it cannot fail every subsequent read. The result is a login screen rather than a broken session, and the next successful sign-in rewrites the store. Also removes the half-declared Android TV support: the manifest offered LEANBACK_LAUNCHER and the leanback uses-feature with no D-pad focus model, no TV layouts, and neither of the two declarations Play's TV validation also requires (touchscreen required="false", android:banner). That fails review while advertising the app to TV launchers. All four go back together when a focus pass is actually done. And raises jvmTarget from 1.8 to 17 under compileSdk 36, with matching compileOptions — AGP 8.11 already requires a JDK 17 toolchain, so 1.8 was only capping emitted bytecode. Nothing else in the build assumed 1.8. TRACES: UR-012 | IR-014 |
||
|
dtourolle
|
521acc75fd |
build(android): add a side-by-side release build for validating R8
R8 has broken release APKs here before by stripping the JNI-loaded player and security classes, and the only way to reproduce that was to build with the real signing key and clobber the install you actually use. `./scripts/build-and-deploy.sh release --device --debug` now builds a fully minified release APK — exactly what ships — into the .debug applicationId slot, signed with the local debug keystore: release com.dtourolle.jellytau 0.5.5 release --debug com.dtourolle.jellytau.debug 0.5.5-debug-release debug com.dtourolle.jellytau.debug 0.5.5-debug It shares the applicationId *and* the signature with the plain debug build, so the two replace each other cleanly rather than colliding, and the versionName suffix says which is currently installed. No real key is needed, so the side-by-side path deliberately skips write-keystore-properties.sh. The flag reaches Gradle as JT_SIDE_BY_SIDE=1. CI never sets it, and the release manifest merges byte-identical without it — verified both ways through processUniversalReleaseMainManifest. deploy-android.sh and build-and-deploy.sh learned the flag too, since the APK path is unchanged but the package to launch is not. |
||
|
dtourolle
|
2cc39cd7fd |
build(android): install the debug build alongside release as its own app
Testing a debug build meant uninstalling the real one first: same
applicationId signed with a different key is INSTALL_FAILED_UPDATE_
INCOMPATIBLE, so every experiment cost the app's settings, credentials
and offline cache.
The debug build type now carries applicationIdSuffix ".debug" and
versionNameSuffix "-debug", so it installs as com.dtourolle.jellytau.debug
("JellyTau Debug", 0.5.5-debug) with its own data directory — two
independent apps on one device.
Only the *application* id is suffixed. Kotlin classes stay in the
`namespace` package com.dtourolle.jellytau, so the JNI loadClass lookups
in player/android/mod.rs, the manifest <service> entry and the R8 keep
rules are untouched, and the FileProvider authority was already
${applicationId}-relative. Launcher names come from the appLabel /
activityLabel manifestPlaceholders rather than resValue, which would
collide with Tauri's generated strings.xml; release resolves them back to
@string/app_name and merges byte-identical.
deploy-android.sh reports the target package and explains an
UPDATE_INCOMPATIBLE failure instead of leaving it raw; logcat.sh takes a
debug|release argument (it was filtering on com.jellytau.app, a package
that has never existed) and attaches by pid when the app is running.
Verified: aapt2 badging on the built APK reports
com.dtourolle.jellytau.debug / 0.5.5-debug / "JellyTau Debug", and the
release manifest merge is unchanged.
|
||
|
dtourolle
|
26286ac6e7 | sign build |