A video handed off to background audio (UR-040) streams a live mp3 transcode
over plain HTTP. That response is chunked, so there is no Content-Length, and a
live encode carries no Xing header, so the extractor establishes no duration —
on device every position tick reads "<position> / 0.0".
ProgressiveMediaPeriod.configureRetry resumes a failed load in place only when
the content length is known or the seek map has a duration. With neither it
assumes the source is live, sets pendingDeferredRetry, and when the sample
queues next run dry resets them and re-requests the URL from offset 0. Our URL
carries StartTimeTicks = the handoff point, so "offset 0" is where audio-only
mode began: a transient load error armed a retry that fired minutes later, when
the buffer finally drained, and playback resumed at the handoff point and ran
on from there. A successful retry raises no error and ends nothing, so neither
arm of DR-129 was consulted and no discontinuity handler existed — the only
trace was a position that went backwards, which is why it read as random, and
why the two earlier fixes for the same symptom (DR-129's phantom end, DR-159's
relative-timeline leak) left it standing.
A retry that can only restart the stream is worth less than no retry at all.
player_retry_restarts_stream marks a Remote audio-only video item,
loadWithMetadata carries the answer to Kotlin, and the pure StreamRetryDecision
holds it for a DefaultLoadErrorHandlingPolicy that returns C.TIME_UNSET —
making onLoadError answer DONT_RETRY_FATAL before it reaches configureRetry.
The rewind becomes a recoverable error, which recoverable_error_resume already
answers by re-opening at the position playback reached, StartTimeTicks
rewritten so the selected audio track survives. Every other source keeps the
player's retry: a static file and an HLS playlist declare their timeline and
are resumed where the load stopped. onPositionDiscontinuity is added for its
log line alone, loud for DISCONTINUITY_REASON_INTERNAL, which is the rewind's
own signature.
Verified on device (FP5), same procedure both runs — handoff, 60s to fill the
buffer, a 45s radio outage:
before 13:54:52 BUFFERING, then "Media ready! Duration: -9.22e15"
(C.TIME_UNSET) and position 1165.4s -> 840.349s, exactly the handoff
base, 3.5 minutes after the outage with nothing logged between
after 14:05:08 "declining the player's retry", playback undisturbed off the
buffer for 69s (a fatal load error is only raised when the renderer
next needs data), then ERROR_CODE_IO_NETWORK_CONNECTION_FAILED ->
re-opening at 785.6s -> READY, and no rewind in the following 7 min
Kotlin tests run with ./gradlew :app:testUniversalDebugUnitTest.
TRACES: UR-040, UR-004 | DR-203 | UT-200
onSkipToNext/onSkipToPrevious forwarded a bare next/previous to Rust, which
always advanced the queue. Correct for music, wrong for a video whose audio is
running through a background-audio handoff (UR-040): pressing skip to re-hear a
line jumped to the next episode instead of scrubbing.
resolve_skip_action in player/seek.rs maps the command to Advance or SeekTo, and
is_background_audio_active() is the whole test — the handoff exists only for
video, and an episode played through it reports MediaType::Audio, so media type
cannot distinguish the case. Forward 30s, back 10s, both clamped to [0, duration]
so a skip near either end cannot seek negative or read as EOF and advance.
Routed through the same spawn-then-seek_absolute path as the scrubber, because a
handoff seek re-opens the stream and must not run under the blocking lock
(DR-159). Kotlin keeps sending the opaque command; it only gains FAST_FORWARD/
REWIND in the PlaybackStateCompat so the system stops drawing skip arrows for a
control that scrubs. The remote-volume action block is deliberately untouched:
the handoff never applies to cast sessions, where skip really does mean advance.
Tests written first and watched fail (left: Advance, right: SeekTo). 706 Rust
tests pass, clippy 0, coverage 90%.
51 clippy warnings -> 0, with 8 justified #[allow]s (IPC arity, specta wire
types, and the 9 test-only await-holding-lock sites). 27 raw lock calls moved to
the poison-tolerant helpers - all of them test code; production was already
clean.
Caught a non-neutral clippy --fix: removing the redundant 'use hostname;' in
credentials.rs orphaned its #[cfg(target_os = "linux")] onto SERVICE_NAME,
which would have cfg'd the constant out of every non-Linux build. Compiles clean
on Linux, so only Windows/macOS CI would have caught it.
`cargo clippy --all-targets` went from 51 warnings (23 in the lib) to zero.
Most were mechanical — needless borrows, `assert_eq!` against a bool literal,
`vec!` where an array does, `or_insert_with(Vec::new)`, a loop index used only
to index — and were applied with `clippy --fix`, then reviewed line by line.
That review caught one auto-fix that was *not* semantically neutral: dropping
the redundant `use hostname;` left its `#[cfg(target_os = "linux")]` orphaned
directly above `SERVICE_NAME`, which would have silently cfg'd the constant out
of every non-Linux build. Removed the stray attribute with the import.
Where a lint asked for a risky change rather than a better one, it is suppressed
with a comment saying why:
- `too_many_arguments` on five `#[tauri::command]` handlers and
`ThumbnailCache::save_thumbnail` — most of the arity is `State<'_, _>`
injection, and a parameter struct would change the IPC contract and the
generated TypeScript for no readability gain.
- `large_enum_variant` on `PlayerStatusEvent` and `AutoplayDecision` — both are
serde + specta wire types emitted a handful of times a second, never bulk
allocated; boxing would have to stay invisible to the generated bindings while
every match arm gained a deref.
- `await_holding_lock` on the `hybrid`/`offline` test modules — the guard is a
test-only serialisation lock for the process-global `INCLUDE_CATALOG_BROWSE`
flag, and the await it spans *is* the critical section. Each `#[tokio::test]`
gets its own single-threaded runtime, so this is not the production deadlock
class the lint targets; restructuring would reintroduce the flag race.
Real fixes elsewhere: `JellyfinItem::to_media_item` takes `self` by value, so it
is now `into_media_item`; the five-tuple episode row in the download commands
has a named `EpisodeRow` alias; the mpv `PropertyChange` arm matches
`name: "pause"` instead of guarding on it.
Also converted the last 27 raw `.lock().unwrap()` call sites to `lock_safe()`,
completing the `MutexSafe`/`RwLockSafe` convention. All of them turned out to be
in test modules — production code was already clean — so this is consistency
rather than a fix. The two raw locks in `utils/lock.rs` stay raw on purpose:
those tests deliberately poison a mutex to prove the helpers recover from it.
Pure refactoring: all 698 tests still pass.
Twelve requirements were marked Done in docs/requirements.md with zero TRACES
anywhere in the tree. The features work — the tags were simply never written —
so the matrix over-reported on exactly the requirements a reviewer would most
want to verify. Each is now tagged at the code that actually implements it:
- JA-006 / JA-009 / JA-013 / JA-014 / JA-015 / JA-018 and IR-022 / IR-024 at
their Jellyfin call sites in repository/online.rs (search, get_item's
MediaStreams/People fields, Items/Resume, Shows/NextUp, FavoriteItems DELETE,
get_person/get_items_by_person), plus the commands that expose them.
- UR-006 / IR-006 across the lockscreen spine: JellyTauPlaybackService (the
MediaSessionCompat owner), the nativeOnMediaCommand JNI intake, and
LockscreenMetadata / update_lockscreen_metadata.
- IR-008 at both audio-focus mechanisms — ExoPlayer-managed for audio, the
manual AudioFocusRequest listener for video — and at the media-type string
that chooses between them.
- UR-037 (with DR-042, also untraced) on the video-library poster grid:
LibraryGrid, MediaCard, and the tv/movies routes.
Resolve contradictory statuses across layers, evidence first:
- IR-018/IR-019 were Planned under Done URs because they were scoped to libmpv.
MpvBackend is the audio-only backend and overrides neither
set_subtitle_track nor set_audio_track — the trait's not_implemented()
default still stands — so UR-020/UR-021 are met by ExoPlayer and by the
HTML5 <video> path instead. Both IRs are re-scoped to those backends and
marked Done; IT-008/IT-009 and the stale @req-planned markers in backend.rs
follow.
- IR-005 (MPRIS) stays Planned: there is no MPRIS/D-Bus code or dependency in
the project and update_lockscreen_metadata is a no-op off Android. UR-006 is
corrected to Done (Android) rather than the IR being marked Done.
- A note under the IR table records where a UR is met by a different mechanism
than its IR anticipated.
Define the two dangling IDs the source already referenced: DR-189 (the control
bar never auto-hid on a touchscreen, because its timer was armed only from
onmousemove) and UT-188 (its rule test). The live-denominator assertion in
extract-traces.test.ts moves 187/330 to 188/331 accordingly.
Traced requirements 444 to 459; IR coverage 19/32 to 25/32.
Play/pause did nothing on the Android native video path — from the on-screen
tap, from the control bar, and from a direct player_toggle invocation — while
seek and skip kept working. That asymmetry was the whole clue: seek decides in
player_seek_video, transport decides in toggle_playback.
DR-195 is the cause. `html5_playing` is Rust's record of "a webview <video> is
active and in this state", and toggle_playback/play/pause all route transport to
that element whenever it is set. The player route mirrored element state into it
UNCONDITIONALLY — from handleReportStart and, fatally, from handleReportProgress,
which VideoPlayer calls on a 10-second interval. So on the native path the
frontend re-declared every ten seconds that an element was playing when none
existed, and every transport intent was emitted into the void. It also explains
the flashing: the control bar and the JRay overlay both key off isPlaying, which
was being contradicted on every tick. The mirror now lives in
mirrorElementStateToRust() in VideoPlayer, gated on useHtml5Element — the only
place that knows whether an element renders at all. The route cannot tell the
paths apart, which is exactly how it came to lie.
DR-193 hands transport authority back to the native backend when an item loads
into it. Necessary but insufficient alone: the progress interval put the flag
straight back, which is why the first device test after it still failed.
DR-192 presents native video through a TextureView instead of a SurfaceView. A
SurfaceView renders on its own layer outside the app window and punches a
transparent region through it, and everything drawn above that hole — here, the
entire Svelte UI — depends on that composition path. The overlay dropped its
incremental damage: the DOM advanced (slider 476 -> 479 across three seconds)
behind a screen showing neither, so the progress bar froze, controls would not
fade and rotation lost the transport UI, while structural DOM changes got
through, which is why the play overlay always appeared to work. It supersedes
DR-191, which forced redraws in a loop and treated the symptom.
DR-194 hides the video view across a resize and reveals it two frames later. A
TextureView retains its last frame, so between a rotation and the re-fit landing
that frame is stretched across the old rect and the previous frame flashes in
what should be the letterbox bars.
Verified on device (Honor ROD2-W09, Android 16) by driving ADB and reading the
live DOM over the devtools socket: surface tap pauses (position frozen across 12
seconds, overlay raised, transport flipped) and resumes; the control bar does
both. UT-189 drives the real 10-second interval under fake timers — an earlier
version asserted on a freshly mounted player, passed with the guard deleted, and
guarded nothing.
Still open, and deliberately not claimed: DR-192's effect on the overlay repaint
is unverified on device, DR-194's letterbox reset is untested, and the native
default (DR-188) stays off pending DR-190, the background-audio return.
Returning to the foreground before the background-audio stream had started
playing handed the frontend 0.0s, so the video reloaded at StartTimeTicks=0 —
the episode restarted from the beginning — and the stop report that followed
wrote that zero to Jellyfin as the resume point. Caught on device: locked at
18.4s, unlocked 3.5s later with ExoPlayer still IDLE.
The base that turns a handoff's relative timeline into the episode's is applied
once at the native tick boundary (DR-159), so before the first tick nothing has
applied it. The same blind spot covers webview-rendered media, where nothing is
loaded into the native backend at all and its position is a permanent 0 — which
is why 14 of 14 stop reports in a 35-minute trace were zeroes, one landing 40s
after the frontend had correctly reported 15:22 for the same episode.
- absolute_position(): the maximum of the backend's reading, the last position
webview media reported, and the handoff base. Exact rather than heuristic —
at most one term is ever meaningful, and the base is a floor the stream
cannot physically be behind. duration() gains the same fallback.
- Withhold zero-position stop reports. A zero is never information, and
Jellyfin stores the reported position as the resume point, so sending one
only ever destroys a real one.
- Report progress from the controller's own position ticks, through the 30s
throttler it already shared with the native audio path.
/Sessions/Playing/Progress was previously requested zero times in 35 minutes.
- Report a finished audio-only episode stopped at its runtime before advancing,
so Jellyfin's 90% rule marks it played. Nothing else can: the webview is
suspended and its <video> was torn down at the handoff.
- Split the handoff by source — a downloaded file takes no base and a real
seek, a stream keeps its StartTimeTicks base and no seek — and stop routing a
downloaded handoff's absolute seek through the stream rebuild, which refuses
a non-remote source outright.
Reports go through a PlaybackReportSink, which also collapses three copies of
spawn-a-task-and-hope into one and is what let each of these be written as a
failing test first.
TRACES: UR-005, UR-025, UR-040, UR-071 | DR-178, DR-179, DR-180 |
UT-176, UT-177, UT-178, UT-179, UT-180, UT-181
Work from a parallel session in the same working tree, committed here so the
branch is not left half-written. Attribution note: authored in a concurrent
Claude session, not by the author of the preceding commit.
- DR-171: a downloaded video keeps audio the device can actually decode.
`original` quality asked for a straight copy, so an E-AC-3/AC-3/DTS/TrueHD
track came down untouched and the webview had nothing to play it with.
- `get_video_download_url` gains the media source, so the URL is built against
the source actually chosen rather than the item's default.
- Device profile and repository plumbing updated to match.
Verified green as a whole: 656 Rust tests, 945 frontend tests, svelte-check clean.
Batch of reported bugs and enhancements.
UI
- Pages no longer inherit the previous page's scroll position (DR-156, UR-072).
The shell keeps its scrollers alive across navigation by design, so the
element never remounts and its scrollTop survived the route change; SvelteKit
restores window scroll, which this app never uses. ScrollMemory records the
offset per route and per container: forward moves reset to the top, Back
restores where the route was left.
- Season header stacks on narrow screens, and the title span gets min-w-0 so it
actually truncates instead of overflowing under the action buttons.
- Favourites gets a labelled tile at the head of the library grid rather than
only an unlabelled heart icon in the header.
Playback
- Full-screen video on Android hides the system bars (DR-157, UR-066).
requestFullscreen() cannot touch the Activity window from inside a WebView, so
the control did nothing visible while the bars stayed painted over the video.
ImmersiveModeBridge hides them, restored on exit, Escape and teardown.
- Background-audio handoff stops leaking its relative timeline (DR-159).
background_audio_base was a display-only correction applied in two places
while progress reports to Jellyfin, the frontend and media3's own seeks all
worked in the relative timeline treating it as absolute — each crossing losing
exactly `base` seconds. The conversion now happens once, in the position tick,
and inbound seeks resolve through seek_absolute, which re-opens the stream at
the requested position because the handoff transcode cannot seek.
- Picture-in-picture works on the path that actually plays video (DR-160).
canEnterPip demanded a native ExoPlayer surface, but that path is behind a
flag defaulting to off, so PiP could never engage. It now accepts the WebView
<video> too, keeping the WebView visible and routing play/pause to the element.
- Native video is now the default so PiP has a real surface (DR-161). The
scrub-regression tests pinned the flag-off path implicitly; they now mock it
off explicitly. The native scrub/seek path is not covered by the suite and
needs device verification.
Watched state
- Watched toggle on the episode row, season header, series and movie hero, and
the Episode Focus View (DR-158, UR-073). Both backend halves already existed
with no caller. storage_set_watched covers a container's episodes so the
toggle is honest offline, and QueuedOp::MarkUnplayed gives the sync queue the
missing direction.
Release
- Fix the Android versionCode floor (set-version.sh). v0.5.2 shipped code 5002
under an earlier minor*1000 scheme, but the current minor*100 formula yields
1502 for that version and 1503 for 0.5.3 — so every 0.5.x release built from
it was an un-installable downgrade for anyone already on v0.5.2. Widened to
10000 + major*1000000 + minor*1000 + patch (0.5.3 -> 15003).
- Bump to 0.5.3.
Selecting a subtitle on Android did nothing. The Kotlin side has been
complete for a long time — JellyTauPlayer.load() parses a subtitles JSON
array into MediaItem.SubtitleConfigurations and setSubtitleTrack() drives a
TrackSelectionOverride — but nothing ever reached it.
VideoPlayer built the list and then threw it away: it resolved every
subtitle stream's URL into a subtitleTracks array and the
commands.playerPlayItem({...}) call two lines below passed only streamUrl,
title, id, videoCodec and needsTranscoding. PlayItemRequest had no subtitle
field to put them in, so create_media_item hardcoded subtitles: vec![],
android/mod.rs serialized "[]" across JNI, and every MediaItem reached
ExoPlayer with zero SubtitleConfigurations. A later set_subtitle_track then
found no text track groups and logged "Invalid subtitle track index".
PlayItemRequest now carries the tracks (defaulted, so the background-audio
handoff and next-episode callers are unchanged) and create_media_item
threads them onto the MediaItem.
Serialization: SubtitleTrack is reused verbatim rather than given an
IPC-specific twin, and deliberately keeps snake_case. The same struct feeds
two consumers that both spell mime_type — the JNI JSON that
JellyTauPlayer.load() reads with optString("mime_type"), and the generated
binding the frontend types against. camelCasing it would not fail the build
or the IPC; Kotlin would silently fall back to its default MIME type for
every track. UT-146 asserts the exact serialized keys so a future
rename_all cannot pass unnoticed.
The index mapping was NOT already correct. setSubtitleTrack(n) indexes
ExoPlayer's filtered text track groups, i.e. the position of the sideloaded
configuration — but the menu passed its own {#each} row number, which counts
every subtitle *stream*, including ones whose URL failed to resolve and were
therefore never sideloaded. One failed URL and every track below it selected
the wrong subtitle. The position is now looked up in the exact array that
was sent (nativeSubtitleArrayIndex), and a stream that was never sent maps
to "off" rather than to a guessed position.
The resolution loop also reuses resolveSubtitleTracks() from the Linux fix
instead of duplicating it, which fans the URL requests out in parallel
rather than awaiting them one per stream before playback can start. The
awaits are safe where they sit: the native-mode pitfall is about Svelte
lifecycle calls after an await, and nothing is registered here — the
background-audio subscriptions above still run synchronously.
No Kotlin change was needed.
Tests (UT-145, UT-146, UT-147) were written first and failed: PlayItemRequest
had no subtitles field to compile against, nativeSubtitleTracks and
nativeSubtitleArrayIndex did not exist, and the playerPlayItem call carried
no subtitles key.
TRACES: UR-020 | IR-016, JA-008 | UT-145, UT-146, UT-147
Bundles this session's work plus the concurrent search/offline/player changes.
Every gate passes on the combined tree: 885 frontend tests, 610 Rust tests,
clippy clean, boundary clean, trace coverage 86%.
Offline video playback — four separate defects, each of which alone stopped it:
DR-133 A completed download's file_path is already absolute (the worker
rewrites it on completion), but the player rooted it a second time and
handed the webview /data/user/0/app//data/user/0/app/videos/x.mp4.
DR-134 The asset protocol was never enabled: no protocol-asset feature and no
assetProtocol config, so convertFileSrc produced URLs nothing answered.
Also silently defeated the cached-thumbnail path, which fails soft to
the server copy and hid it whenever the server was reachable.
DR-137 Tauri's asset protocol answers a range-less request by reading the
whole file into memory, and only advertises Accept-Ranges from inside
its range branch, so the first request never learns ranges exist.
Chromium gave up with PIPELINE_ERROR_READ after ~31s. Local media is
now served by a loopback HTTP server: bounded 4 MiB chunks streamed
from the file handle, every response length-delimited, and a range-less
request answered with one chunk rather than the file. Confined by a
per-session token and to the app data directory, because loopback is
shared between apps on Android.
DR-138 Release builds set usesCleartextTraffic=false, so Android rejected the
request to that server before any I/O. A network-security-config
exempts 127.0.0.1 only; a remote server must still be HTTPS.
Downloads:
DR-135 download_item never records media_type and the reconnect resolver read
that NULL as 'audio', so a movie queued from a media card had its URL
resolved by get_audio_stream_url and completed as an audio-only
transcode. The item's own type now decides.
DR-136 Rows already downloaded that way are requeued on reconnect, since
prevention alone leaves them reading "downloaded" and still unplayable.
Known limitation: a download taken at `original` quality is a byte copy of the
source, so it can be any container. One such file is an AVI holding XVID, which
the webview cannot play in any case — the media server serves it correctly and
Chromium refuses it. That needs either a transcoded download preset or the
native ExoPlayer surface work, and is not addressed here.
Also fixes two ID collisions between concurrent work: DR-143 defined twice
(search vs offline gate) and UT-131 defined twice (Episode Focus hero vs channel
cap). The search requirement is now DR-147 and the channel-cap test UT-141, with
their code references and matrix rows updated.
MediaCodecList answers "can this device decode 5.1", which is not the
question that decides whether the user hears anything: a phone decodes an
AC-3 5.1 track happily and still has two channels to play it out of. The
DeviceProfile carried no MaxAudioChannels, so Jellyfin was free to
direct-play the multichannel track to a two-channel sink — silence or
dialogue folded into surround channels that go nowhere, depending on the
device.
Report media3 AudioCapabilities.maxChannelCount for the current route over
JNI alongside the codec lists, and bound the direct-play and transcoding
profiles (and the HLS URL's TranscodingMaxAudioChannels, previously
hardcoded to 2) by it. No codec is ever removed, so a device with genuine
surround output keeps direct-playing it. A missing or zero reading means
"route not yet established", not "no audio", and falls back to stereo.
Pausing from the lockscreen did nothing while a video's audio played in
the background. The handoff starts native ExoPlayer audio and only then
tears the WebView <video> down, and that teardown fires a DOM `pause`
the frontend reports like any other — leaving html5_playing = Some(false).
Transport therefore stayed aimed at the element: the lockscreen pause
emitted a ControlCommand into a <video> that no longer existed while the
native player carried on.
The controller now tracks a background-audio handoff explicitly. Entering
one hands transport authority to the native backend and drops the dying
element's state/position/media-loaded reports, which also stop flipping
the UI to paused and dragging the position backwards. Exiting restores
the element as the player.
A lockscreen pause also has to survive the return to the foreground: the
video used to resume from a snapshot taken at handoff time, undoing the
pause on the way back in. shouldResumeOnForeground() lets an explicit
`paused` from the player override that snapshot.
TRACES: UR-040, UR-005 | DR-052, DR-097
A recoverable player error meant "playback is over": the frontend's error
handler stopped the player unconditionally, so a wifi blip killed the
track. Android already decides in its JNI callback, but MpvBackend is
constructed before PlayerController exists, so its event thread has no
controller to ask.
So MPV reports the failure and the frontend echoes it into the new
player_recover_stream command — the same shape as PlaybackEnded ->
player_on_playback_ended, keeping the decision in Rust. The command
re-opens the stream where it stopped, with the existing attempt budget
and backoff, and returns whether it handled it; only a false answer
falls through to the old stop path.
Android now reports the errors it has already declined as
*unrecoverable*, so the echo never asks the same question twice.
TRACES: UR-004, UR-040 | DR-130 | UT-117
Two MPV-side fixes for the same failure story — a wifi blip during
playback.
The demuxer gave up the moment a read failed and MPV raised
EndFile(ERROR), so a momentary outage killed the track outright. Enabling
ffmpeg's reconnect options handles the common case entirely below our
level, so most outages never reach the recovery path at all. Set
non-fatally: their availability varies with the libmpv/ffmpeg build, and
losing resilience is not a reason to refuse to play anything.
Separately, `time-pos` and `duration` are live properties of the *loaded*
file: at EOF MPV unloads it and both stop resolving. Reading them straight
through returned 0.0/unknown at exactly the moment end-of-file handling
needed to know where playback had reached, so the player appeared to
rewind to 0:00 as a track ended. `ObservedTime` records the last reading
seen while media was loaded and the accessors fall back to it.
Search's instant leg read only downloaded items, so with no downloads it
returned nothing and every keystroke fell through to a full Recursive=true
server query. It now reads the whole synced catalog through the same
availability CTE get_items uses, gated on the same include_catalog_browse
flag so search and browse cannot diverge. (UR-065, DR-108)
Also fixes three defects found while confirming that:
- items_fts grew by a full duplicate index every catalog pass. INSERT OR
REPLACE fires no AFTER DELETE trigger without recursive_triggers, so the
old index row was orphaned, and a TEXT PRIMARY KEY meant the replacement
took a fresh rowid and inserted a second entry. Now a real upsert, with
migration 021 rebuilding existing indexes. (DR-110)
- DELETE FROM items existed nowhere, so server-side deletions never
propagated. Adds a post-crawl mark-and-sweep, scoped to crawled types,
skipping downloaded items, and refusing to run after a partial crawl
because items.parent_id cascades. (DR-110)
- The index omitted MusicArtist, Playlist and People, which search groups
results by. Adds them plus people_fts (migration 022). (DR-111)
Re-indexing moves from a frontend startup call to a Rust background task
with a 6h TTL, so a long session no longer searches a stale catalog and a
restart no longer forces a crawl regardless of freshness. (DR-109, IR-030)
Downloads gain a lifetime tier. Eviction selected every completed row by
age with no download_source filter, so hitting the storage limit deleted
the oldest download -- typically one saved deliberately for offline -- to
make room for a precached track. It now reclaims only 'auto' rows, and
expired ones are reclaimed first, before live cache is evicted.
(DR-126, DR-127)
Downloaded video and audio-only handoffs now play from disk instead of
streaming; the video path had never consulted downloads at all. No
transcode is involved: MPV runs video=no and ExoPlayer has no surface for
an Audio item. (DR-123 in part, DR-128)
FTS queries are built as quoted phrases so apostrophes, hyphens and
slashes are data rather than operator syntax, and the item-type filter is
bound rather than interpolated.
Specs: docs/specs/catalog-index-search.md,
docs/specs/read-through-media-cache.md
Includes concurrently-developed favourites browsing and background-audio
stream-end handling; the two workstreams share offline.rs, lib.rs and
online.rs, so no subset of files builds independently.
Opening a series dumped the viewer at the top of season 1, and its Play
button played nothing at all: it resolved `$libraryItems[0]` — the first
*season* by SortName — and navigated to `/player/<seasonId>`, which the
player route bounced straight back to `/library/<seasonId>`.
The backend could already answer "where is this viewer in this show":
`repository_get_next_up_episodes` has accepted a `series_id` since it was
written and no caller had ever passed one.
Backend (DR-101, DR-106)
- `repository/series_progress.rs`: `pick_current_episode` — in progress,
else Next Up, else first unwatched, else the premiere. The third rung is
the offline path, where Next Up is always empty. `sort_series_order` puts
specials (season 0) after the numbered seasons.
- `repository_get_series_episodes` takes over the season fan-out and the
flat-series fallback, which were domain knowledge living in the frontend.
- `clear_watch_history` maps to Jellyfin's mark-unplayed (recursive over a
container, also zeroes resume). Offline it refuses rather than diverging
state the next sync would undo.
Frontend (DR-102, DR-103, DR-104, DR-107)
- Seasons collapse; only the current one is expanded, and the current
episode is badged and scrolled into view.
- Hero button reads `Resume S2E4` / `Play S1E1` and opens that episode's
focus view, where Play commits (ux-flows §5B.5).
- Seasons are no longer a destination: `/library/<seasonId>` redirects to
`/library/<seriesId>#season-N`, and every inbound link follows.
- The "More Episodes" strip spans the whole series, so a season finale
offers the next premiere instead of dead-ending (§5B.2).
- Clear-history buttons on the series hero and each season header.
Routes (DR-105)
- `/library/tv` and `/library/movies` absorb their all-titles and genres
pages as `?view=` tabs; the four legacy routes redirect. 6 video routes
become 2, and `/library/shows/genres` stops being the odd one out.
Logic extracted to `seriesNavigation.ts`, `episodeStrip.ts` and
`libraryView.ts` so it is unit-tested rather than buried in components.
Spec: docs/specs/series-current-episode-navigation.md
An episode played audio-only while the app was backgrounded stalled at the
episode boundary instead of advancing, and ExoPlayer parked in STATE_ENDED —
where any later play intent (lockscreen, headset, Bluetooth reconnect) replays
the ended item, surfacing as the episode randomly restarting.
End-of-playback is dispatched from two places and they disagreed. The Android
JNI callback carried the background-audio branch but can never reach it:
load_and_play sets EndReason::NewTrackLoaded at every load and nothing clears
it, so the first real end consumes it and the decision is always Stop. The call
that actually decides is the frontend's echo of the resulting PlaybackEnded into
player_on_playback_ended — and that path had no background-audio case at all, so
it started a countdown whose advance is a webview goto() that cannot start audio
while backgrounded.
Both dispatchers now share PlayerController::auto_advance_to_next_episode, so
they cannot drift apart again.
The handoff base offset moves from the BackgroundAudioOffset Tauri state onto
the controller, and the advance clears it: the next episode's stream is built
without StartTimeTicks, so its timeline is already absolute and a stale base
made player_exit_background_audio return old_base + position_in_new_episode.
Unreachable until the advance actually worked.
Tests (red before the fix):
- test_auto_advance_background_audio_episode_advances_in_backend
- test_auto_advance_foreground_video_episode_uses_countdown
- test_advance_to_next_episode_audio_only_clears_handoff_base
Bump to 0.2.9.
Video on Android/Linux renders in a webview <video> element, and the
frontend facade short-circuited play/pause/toggle straight into the
adapter whenever one was registered. Html5PlayerAdapter.toggle() then
decided play-vs-pause by reading el.paused off the DOM, so the Rust
controller never saw the intent and could not serialise competing ones.
el.paused flips transiently while an element buffers or settles a seek.
Two intents ~150ms apart therefore read *different* values and performed
*opposing* actions — one playing, one pausing — which self-sustained a
play/pause loop that needed no further input. On device this showed up
as a fully healthy element (readyState=4, networkState=1, not seeking,
not buffering, not ended) pausing itself roughly once a second, so
unpausing or skipping ahead bounced straight back to paused.
The root cause was that Rust held NO state for webview-rendered media:
report_html5_state only re-emitted its argument, despite the comment
above it claiming the controller was the single source of truth. It had
nothing to decide a toggle from.
Now report_html5_state tracks the reported state, and play/pause/toggle
consult it and drive the element by emitting a ControlCommand — the same
"backend decides, adapter executes the primitive" split player_seek_video
already uses. A stopped/idle report clears the tracking so MPV/ExoPlayer
regain authority for music playback.
Tests cover the loop signature directly (repeated toggles must alternate,
never repeat or oppose) plus a guard that one intent yields exactly one
ControlCommand — which matters on Windows, where the backend is itself
webview-based and could otherwise be driven twice.
ExoPlayerBackend was the only backend not overriding the PlayerBackend trait's
set_audio_settings/audio_settings defaults, so the Settings > Audio controls
rendered on Android and silently did nothing — the default returns Ok(()) while
applying nothing, so the failure was invisible.
Rust owns what the values are (canonical 10-band ISO layout, preset curves,
normalization presets); Kotlin owns when the AudioEffect objects exist, since
that needs the live audio session id.
- settings.rs: audio_settings_jni_payload() sanitises (crossfade clamped, band
vector normalised) before serialising, so a malformed vector cannot reach the
Kotlin parser. JSON rather than a wide JNI signature, matching how load()
already passes subtitles — adding a field will not change the signature.
- ExoPlayerBackend: set_audio_settings/audio_settings over JNI; ExoPlayerState
gains the first command-side field (settings are pushed out, never reported).
- JellyTauPlayer.kt: Equalizer, LoudnessEnhancer, and gapless via
pauseAtEndOfMediaItems.
Three details that are easy to get wrong:
- Effects re-attach on onAudioSessionIdChanged. ExoPlayer rebuilds its audio
sink on a format change, which invalidates effects bound to the old session;
without this the EQ silently stops applying mid-queue.
- All effect work is posted to mainHandler rather than run inline. AudioEffect
construction from a player callback can re-enter the player and deadlock —
the same shape as the AutoplayDecision lock-scrutinee bug.
- Device equalizers expose a device-dependent band count (commonly 5) at fixed
centres, so the canonical 10 bands are resampled by nearest centre frequency.
resampleBands() is a pure @JvmStatic function so that mapping is testable
without a device.
Normalization is approximate, not parity: LoudnessEnhancer is a gain stage, not
a true EBU R128 normalizer like MPV's dynaudnorm. Recorded as such rather than
claimed as equivalent.
Crossfade is deliberately excluded — unimplemented on every platform and
blocked on mpv, so building it on Android alone would invert the parity gap.
Tests written first and observed failing (cannot find function
audio_settings_jni_payload) before the implementation: the payload contract is
pinned by tests because a serde rename would otherwise silently break the
Kotlin parser.
Not yet verified on a physical device — AudioEffect availability and band
layouts are device-specific. Requirements matrix marks these rows accordingly,
and flipping the trait default to Err(not_implemented()) is deferred until that
verification lands.
Stopping the backend makes the native player fire its ended callback,
which lands in on_playback_ended. The timer thread cancels the timer
first, so by the time the callback inspects it the mode reads Off — the
sleep-timer branch is skipped and the episode path runs, showing a
next-episode popup (or advancing outright) right after the user's sleep
timer expired.
Record EndReason::UserStop before the stop reaches the backend. That is
the honest label: the stop was user-initiated, just via the timer they
set rather than the stop button.
TRACES: UR-023, UR-026 | DR-029
An episode handed off to the audio-only path for background playback is a
MediaType::Audio item, so autoplay's video-only checks stopped
recognising it as an episode: playback simply ended at the episode
boundary instead of continuing to the next one.
- Carry episode identity (item_type, series_id) through the
background-audio handoff so the backend queue item still knows it's an
episode; is_episode_item now trusts item_type over the media_type
heuristic, and the sleep timer's episode counter follows.
- The frontend normally performs the advance by navigating to
/player/<id>, which is unavailable while the WebView is suspended.
advance_to_next_episode_audio_only drives it entirely in the backend:
fetch the next episode, build its audio-only stream URL, and load it
into the native audio player, preserving episode identity so the
following boundary advances too.
- Android's autoplay dispatch routes background-audio episodes to that
backend advance and keeps the countdown path for the foreground.
- get_audio_only_stream_url_for_video joins the MediaRepository trait
(online delegates to the existing builder, offline errors) so the
controller can reach it without a frontend round-trip.
TRACES: UR-040, UR-023 | DR-052 | JA-032
Adds WebviewAudioBackend, used on non-Linux/non-Android targets (e.g.
Windows) where there is no libmpv/ExoPlayer. Instead of decoding, it
emits a WebviewAudioLoad event with the stream URL; a frontend <audio>
element (WebviewAudioAdapter + webviewAudio service) plays it and reports
state/position back through the existing player_report_* round-trip, so
the Rust PlayerController stays the single source of truth. Play/pause/
seek reach the element via the existing ControlCommand event.
All video already renders in the webview on every platform, so this
completes audio-only playback for Windows (video via WebView2, audio via
<audio>). Pure Rust + Tauri events, so it still cross-compiles from Linux.
Regenerates bindings.ts (adds webview_audio_load; also carries the
equalizer EQ bindings).
TRACES: UR-003, UR-004, UR-005 | DR-004
Adds a 10-band graphic equalizer to AudioSettings (enabled flag +
per-band dB gains, normalised to 10 entries and clamped to range).
Presets return gain curves; the settings page gains EQ UI. libmpv
applies the filter on Linux (Android parity pending). Old persisted
settings without EQ fields load as disabled + flat.
Also includes the requirements/traceability/ux-flows doc updates for
this feature and the home long-press routing (UR-058/DR-087).
TRACES: UR-027 | IR-020, DR-030 | UT-079, UT-080, UT-081, UT-082
Rust: PlayerMediaItem and MergedMediaItem gain image_id (dual-carry),
populated from primary_image_tag at every construction/conversion site.
Regenerated bindings.
Frontend: all catalog + player + merged readers now use imageId. The
NowPlayingItem->MediaItem bridge (player.ts) properly maps the remote
session's Jellyfin fields (Type, runTimeTicks, primaryImageTag) onto the
neutral kind/durationMs/imageId. Types that are genuinely out of scope
(Person, NowPlayingItem, PlayItemRequest) keep primaryImageTag.
Rust 456, frontend 644, check clean.
Establish src-tauri/src/domain/ as the single source of truth for the
media model, with all Jellyfin translation isolated in from_jellyfin.rs.
Adds MediaKind enum and neutral duration_ms/image_id fields to MediaItem
as additive, defaulted dual-carry alongside the legacy Jellyfin-named
fields, so nothing breaks while the frontend migrates off them.
- domain/media.rs: canonical MediaKind (closed enum, replaces stringly
item_type), Default = Other so unknown/defaulted items are inert.
- domain/from_jellyfin.rs: total, panic-free item_type -> MediaKind
classification (all audited types + person subroles) and ticks->ms.
- MediaItem gains kind/duration_ms/image_id, populated at both mapping
seams (online to_media_item, offline cached_item_to_media_item) and
the synthesized-album/person sites.
- Regenerated bindings.ts: frontend now HAS the neutral model available.
Phase 1 of docs/specs/frontend-domain-model.md. No frontend behaviour
change yet; wire shape is a superset of before.
Rust 456 tests, frontend 644 tests, check + check:boundary all green.
Hand video playback off to a native audio-only stream when the app is
backgrounded or locked, with no on-device video decode (UR-040). Adds
player_enter/exit_background_audio commands, an audio-only stream URL
for video items across the repository layer, and the frontend handoff
state machine wired into VideoPlayer. Includes accompanying
repository/offline/player refactoring and regenerates the traceability
matrix.
Establish a decoupled player boundary so UI and backend interact with video
through one contract, with the HTML5 (Linux/interim-Android) and native
(ExoPlayer) providers as interchangeable primitive-executor adapters.
- PlayerAdapter interface + AdapterHost callback bag (adapters/types.ts): the
adapter owns only decision-free element PRIMITIVES (seekElement, reloadSource,
play/pause, setVolume, selectSubtitle); it never branches on strategy.
- Seek/audio-track DECISIONS stay in Rust (player_seek_video / _switch_audio_track
return a strategy); the facade dispatches the chosen primitive to the active
adapter. Both providers share the one decision path — logic lives once, in Rust.
- Facade holds the active adapter; a new ControlCommand PlayerStatusEvent lets
backend control (lockscreen/remote/sleep) drive the webview <video> element.
- Html5PlayerAdapter resolves the LIVE element via the bridge (fixes play/pause
silently no-opping when the element was re-bound).
- Do not emit a "stopped" player state on natural end-of-video: it flipped the
player/mode to idle mid-handoff and suppressed next-episode auto-advance under
a sleep timer. Jellyfin progress reporting is preserved; the backend's
on_video_playback_ended owns the transition.
- VideoPlayer net -300 lines (strategy/HLS-reload logic relocated to the adapter).
- Adds 20 adapter unit tests; existing suites stay green (vitest 457, cargo 416).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Playback reporting (position sync / resume-on-another-device):
- player_configure_jellyfin now builds a PlaybackReporter sharing the player
controller's Arc, so Start/Progress/Stopped actually reach Jellyfin on every
auth path (login/restore/reauth); previously they never did.
- The PlaybackReporterWrapper now shares the same Arc the controller and MPV
progress loop report through, instead of a dead parallel Option.
- Android position callbacks now emit throttled progress reports (30s/item),
mirroring the MPV backend.
Duration flash on pause:
- resolveDuration() prefers the live store duration for the already-loaded
track over the runTimeTicks estimate, so pausing no longer clobbers the
slider's max to 0 when runTimeTicks is missing.
Video leaking into audio mini player:
- isVideoItem() also checks the backend PlayerMediaItem mediaType
discriminator, so a video started via player_play_item (no Jellyfin `type`,
mediaType "video") no longer surfaces in the audio mini player.
Middle-truncation of long media names:
- New truncateMiddle util applied to track/episode/card/mini-player titles so
distinguishing tails (episode numbers, suffixes) stay visible.
Adds regression tests for the duration and mini-player fixes.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The lockscreen controls drifted out of sync, especially while casting, and
couldn't control remote playback. Two media sessions were competing (a Media3
MediaSession driving transport vs a MediaSessionCompat driving the notification),
position was only pushed on play/pause so the scrubber froze mid-track, and
remote mode showed stale local metadata with dead buttons.
- Make MediaSessionCompat the single source of truth; route all transport
commands (both the Compat callback and the Media3 wrappedPlayer) through Rust
via nativeOnMediaCommand instead of touching ExoPlayer directly.
- Push position on every 250ms tick via a lightweight updatePlaybackPosition,
and report 0.0 playback speed when paused so Android stops extrapolating.
- Mirror the remote session's now-playing onto the lockscreen from the native
session poller (works while the screen is locked, unlike WebView timers) via
a new player::update_lockscreen_metadata JNI bridge.
- Make MediaSessionHandler mode-aware: in remote mode forward play/pause/next/
prev/seek to the remote Jellyfin session; Stop while casting emits
RemoteDisconnectRequested, which the frontend handles by transferring to local.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- music landing: diverse per-genre album sliders (online counts /
offline wide-probe fallback) and home-screen library shortcuts
- add ArtistLinks component and shared navigation/genreDiversity utils
- player/playback-mode refinements across Rust and frontend
- Standardize on bun: remove package-lock.json, add packageManager field,
gitignore non-bun lockfiles, fix stray npm install in android:build:clean
- Remove stale build logs and empty dirs (src-tauri/plugins, docs/tickets)
- Move android-dev.sh into scripts/
- Consolidate root docs into docs/ (docker/builder under docs/build/);
move the architecture overview to docs/architecture/README.md
- Extract Requirements Specification from README into docs/requirements.md
and slim README down to a project intro + docs index
- Fix internal references to the moved files
Remove unused imports and a dead test helper, and strengthen tests that
held unused bindings/fields so the values are actually exercised:
- drop unused imports (HttpConfig, MediaType, std::io::Write)
- remove unused TestEventEmitter::clear helper
- replace meaningless size_of asserts with real empty-manager checks
- assert on MockTrack.name in sorting tests
- online.rs: on Linux, advertise only WebView-decodable codecs (h264 video;
aac/mp3/opus/vorbis/flac audio) in PlaybackInfo so Jellyfin transcodes
HEVC/AV1/VP9/etc. to h264 HLS for the WebKitGTK <video> element.
- player: on Linux, don't load video into MPV (no embedded window — it would
start a redundant decode the frontend immediately stops). Add
PlayerController::set_current_item to keep queue/UI/remote-transfer state in
sync without loading the item into the playback backend.
Casting: restore camelCase serialization on SessionInfo/NowPlayingItem/PlayState
(container rename_all = "camelCase" + per-field PascalCase serde aliases so Jellyfin
PascalCase still deserializes). Bindings and the existing frontend are camelCase
again — casting works with no frontend session changes.
Downloads: migrate DownloadButton.svelte and downloads.ts to the typed
commands.downloadItemAndStart / downloadItem / downloadVideo wrappers (request
objects), matching the bundled backend signatures.
Tooling:
- Enable tauri-specta ErrorHandlingMode::Throw so commands.* return Promise<T>
and throw (drop-in for invoke()).
- Disambiguate specta name collisions: player MediaItem/MediaSource ->
PlayerMediaItem/PlayerMediaSource, auth ServerInfo -> AuthServerInfo.
- Regenerate bindings.ts; svelte-check passes (0 errors).
- Add #[specta::specta] to all 201 #[tauri::command] functions.
- Derive specta::Type on all IPC DTOs (repository/types, settings, player/storage/
download command DTOs, player enums, jellyfin SessionInfo/NowPlayingItem/PlayState,
ThumbnailCacheStats, DownloadInfo, CacheConfig, etc.).
- Replace tauri::generate_handler! with a tauri_specta::Builder + collect_commands!
in lib.rs (exports bindings.ts in debug builds).
Two contract changes required by specta constraints (frontend migration follows):
- specta caps command arity at 10 args: download_item_and_start / download_item /
download_video now take a single request struct (params bundled, body unchanged
via destructuring).
- specta can't parse split serde rename_all: SessionInfo/NowPlayingItem/PlayState
switched to rename_all = "PascalCase" (Jellyfin deserialization preserved; these
now serialize PascalCase to the frontend).
cargo check --lib is clean (0 errors). Frontend migration to bindings.ts is the next step.
Move the pure determine_video_seek_strategy function and its VideoSeekStrategy
enum (plus the 5 seek-strategy unit tests) out of the command layer into
player/seek.rs, where they belong and are testable without the Tauri State
harness. commands/player.rs now imports them from crate::player. No behavior
change.
Workstream A — poison-tolerant locking:
- Add utils/lock.rs with MutexSafe/RwLockSafe extension traits that recover a
poisoned std::sync lock instead of panicking, plus unit tests.
- Replace all 153 .lock().unwrap() and 4 .read()/.write().unwrap() production
sites with _safe variants across 14 files, eliminating the player
crash-cascade class. Tokio async mutexes are unchanged.
Workstream B — graceful backend init:
- create_player_backend no longer panics when MPV/ExoPlayer fail to initialize;
it falls back to NullBackend and emits a backend-init-failed event so the UI
can show "playback unavailable" instead of the app crashing. Fatal DB-setup
panics are kept.
Workstream F — doc reconciliation:
- Rewrite software-architecture.md's inaccurate "thin UI / ~800 lines" claims to
reflect reality (~20.5k non-test frontend) and document the events+polling
hybrid plus the new locking/backend-init behavior.
dtourolle
