718dad688dbcab53dd4f4bbdb0f130b1e5ef4f9b
21
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 dtourolle
|
a5ee3c05ce |
feat(benchmark): per-node cost and bottleneck attribution for a run
--benchmark <path> reports cumulative CPU and wall time per node and names the node pacing the run. The pacing node is located from sampled channel occupancy, not from time-in-node: backpressure inflates time-in-node for everything downstream of the real bottleneck, so the obvious measure names the victim rather than the cause. Sampling starts with the network and stops before it is destroyed. Channel fill is instantaneous and everything has drained by shutdown, so a single read at the end reports an idle pipeline however congested it was. kill -USR1 dumps the table from a running or wedged process. Channel occupancy identifies a stalled node -- full input, empty output -- without a debug build or a debugger, which is the difference between diagnosing the AR-004 hang in seconds and reproducing it under gdb. Two knobs this exposes for measurement rather than sets: SAE_CV_THREADS, because OpenCV's TBB arena and KPN's thread-per-node are two schedulers unaware of each other on the same cores; and SAE_CUDA_BLOCKING_SYNC, because the default spin-wait held the embedder thread at 99.7% user time while nvidia-powerd cut the GPU's clock from 1005 to 210 MHz. Neither default changes until a measurement says it should. TRACES: VR-015 | PR-004 |
||
|
dtourolle
|
777c98cb33 |
feat(quality): score every face on sharpness and alignment before it is evidence
Every embedding now carries the quality of the input it came from. Both axes fall out of the AR-005 warp for free: crop_sharpness() is the normalised Laplacian variance over the aligned 112x112, so contrast and size cannot leak into it, and the alignment residual is the part of the landmark deformation a similarity transform cannot explain, so in-plane roll reads as zero and foreshortening does not. Carried, not consumed. Nothing discounts or thresholds on either number yet -- that is AR-030 and VR-012, and the knee has to be located against recorded data before a gate is chosen. What this change buys is that the data exists to locate it with. No face is admitted unscored: the -1 sentinel is preserved rather than clamped, and a degenerate landmark fit is counted rather than silently dropped. Takes the VR-001 dump to schema_version 2. The bump is not for readers, which check for the datasets by name and replay a v1 dump unchanged; it is so a consumer can tell "never scored" from "scored zero", which is not recoverable from the arrays afterwards. TRACES: AR-028, AR-029, AR-030 | VR-001 | SR-002 |
||
 dtourolleandClaude Opus 5
|
c1155cb607 |
feat(gemm): the annex is a matrix, not a list — scored by the same GEMM
The per-film annex was folded in after the gallery multiply by a host-side
cosine loop over a vector of {embedding, actor} structs, justified in-comment
by "tens of embeddings". AR-018/AR-019 retired that assumption: every owned
track promotes, so the annex grows with cast size and film length.
TrackGallery now holds it as a contiguous row-major matrix with a parallel
actor index — the flat_emb_/flat_actor_ shape the baked gallery already uses —
and hands newly promoted rows to the matcher once per frame. The matcher pushes
them into the similarity engine's resident matrix through a new
ISimilarityEngine::append_rows, so one SGEMM covers baked and promoted
references alike and best-of-N is a single pass over one similarity column.
Capacity doubles on overflow, and the GPU backends grow device-to-device, so a
promotion never re-uploads the gallery across the bus.
Absorbing promotions runs once per frame, after every face has been scored.
Appending mid-frame would invalidate the similarity pointer the chunk loop is
still reading, and it also removes an incidental dependence on face order
within a frame — a promotion helps subsequent frames, never the one that
produced it, which is the semantics the expansion store already documented.
OpenBLAS becomes a requirement of the CPU GEMM backend rather than an
opportunistic upgrade. That path is what CI and the cpu builder image run, so
falling back to the scalar loop in silence meant AR-027 could be measured — or
believed — on a kernel no release uses. The loop survives as the correctness
oracle the BLAS backends are diffed against, behind SAE_ALLOW_SCALAR_GEMM.
Call site 3, the deferred TBI pass, is untouched: it does not exist until
AR-020, so AR-026 stays In Progress.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
TRACES: AR-026 | UT-004, UT-005 | SR-001
|
||
|
dtourolleandClaude Opus 5
|
f33403fff8 |
feat(scene): feed TransNetV2 at native rate, derive the dedup window from it
Closes both violations SPEC.md named under "Every model gets the input it was trained for". They are one bug, not two. The dense stream defaulted to 12 fps, so a 100-frame TransNetV2 window spanned ~8.3 s against the ~4 s it was trained on: half-speed motion over twice its temporal context. Boundary timestamps stayed correct throughout, which is exactly why the degradation was invisible and why the compressed separation it produced (~0.50 baseline against ~0.7+ peaks) was read as a property of the ONNX export rather than of the input. Dedup then merged boundaries closer than a literal 0.04 s — one frame at 25 fps, and wider than a frame at 30, so two cuts on consecutive frames became one. Nothing in scenes.json showed it; the file simply had fewer boundaries. Native rate is where that constant did the most damage, which is why fixing the decode rate without fixing the dedup would have made things worse. dedup_window_sec() now takes the median interval the detector was actually fed and halves it. Half a frame rather than a whole one: the only thing being merged is one frame scored by two overlapping windows, and two distinct frames are a full interval apart. Cost is real — dense decode is the pipeline's cost driver. It is accepted; dense_scale and scene_stride remain the reductions that do not run the model off-distribution. scene_threshold 0.60 was fitted against the 12 fps input and is now stale, so VR-006 goes from Low to Medium: it is no longer a refinement, it is a constant that no longer describes the input. AR-002 rides along because it was already implemented, just untagged and unverified — the register said Planned while the code was correct. The size filter becomes FaceDetectorFunc::drop_undersized(), tested at the threshold and at dense_scale 0.5, and checked end to end against the superhero dump, whose smallest face is exactly its recorded 32 px minimum, so the fixture check cannot pass vacuously. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> TRACES: AR-002, AR-011 | SR-002 | UT-002, UT-003, IT-001 |
||
|
dtourolle
|
d98dc2855a |
refactor(bench): SuperHero replaces Road to Bali as the reference film
Bali was chosen because the TRECVID DVU set ships character mugshots, but its reference crops are unusable at scale: median detected face 27 px against a 69 px maximum, so every reference was upscaled 4x or more past what the embedder was trained for (AR-011). A 66 px floor left 2 of 69 references; no threshold exists that both keeps the faces in distribution and leaves enough of them to calibrate. SuperHero is 69 px median and 241 px max. Its gallery builds at a 66 px floor with 14 references over 5 characters, and calibrates on its own (a=15.2867 b=-4.98633, 100% train accuracy) instead of borrowing constants. Measured on the fused 17-minute film, one stream rather than per-scene clips so presence windows cross real scene boundaries as SR-002 intends: precision 1.00, recall 0.65, F1 0.79 — 13 true positives, 0 false positives, 7 misses. Every out-of-gallery character was declined rather than forced onto a nearest match. The misses are the short scenes (14 s, 38 s, 27 s), consistent with per-track accumulation needing sightings. - build_gallery gains --min-face-px, filtering the *detected face* rather than the crop. The DVU images are scene crops, not mugshots, so crop dimensions say nothing about face scale. A poisoned reference is permanent in a way a bad frame is not: it corrupts every future match against that identity. - scripts/fetch_dvu.sh fetches mugshots, scene graphs and segmentation for any DVU film. NIST names the same film three different ways, so KG_DIR and KG_FILE are overridable rather than derived. This exists as a script because the first copy of this data was assembled ad hoc in /tmp and was lost with it, taking the working gallery along. - Replay fixtures move to the artifact registry: push/pull_artifacts.sh gain a replay-fixtures target, and tests/fixtures/dumps/.gitignore keeps them out of git. superhero.h5 is ~9 MB and regenerating it needs the film, the models and a GPU — none of which CI has. The gallery ships with the dumps, since a dump only replays against the gallery it was produced with. - AR-012 and AR-013 coverage is ported onto the new fixture rather than dropped with the Bali cases: 12369 assertions, up from 7991, since the film is an order of magnitude larger than the clips. Suite: 15679 assertions, 101 test cases. TRACES: AR-011, AR-012, AR-013 | VR-001, VR-005 | SR-002 |
||
|
dtourolleandClaude Opus 5
|
eff696b49a |
fix(expansion): finish AR-018, retiring the last two expansion cosines
AR-018 was marked Done while the promotion path still ran on the
constants it was meant to replace. track_gallery.hpp rejected a track
when buffer_spread (1 minus the minimum pairwise cosine) exceeded
expand_track_spread_max, and skipped a view when its raw gal_sim cleared
expand_novelty_sim. Both were bare cosines with no recorded EXCEPTION,
so both were defects under the AR-024 invariant rather than tagging gaps.
The calibrated band was real but unreachable. expand_band_lo/hi were
declared in Config and read nowhere, and set_band() had no callers, so
the gate always ran at the hardcoded 0.90/0.95 while --expand-novelty-sim
and --expand-spread-max stayed live flags.
The spread gate becomes store_coherence: the band's lower bound asked of
every pair in the store, in probability space, rather than a second
constant. admit() compares a newcomer only against its nearest existing
member, so a gradually drifting track chains A to B to C with every step
inside the band while A and C are strangers — the shape a track-ID
collision takes over a slow pan. The bound is re-asked pairwise before
anything reaches an actor's annex.
The novelty gate is deleted rather than converted. SPEC section AR-018
contrasts the band with expand_novelty_sim as the thing it replaces, and
AR-019 requires only that the band is satisfied. Novelty-seeking now
lives entirely in the eviction ordering, which ranks by similarity to the
actor's references instead of cutting at a constant, so there is nothing
left to tune but the two bounds.
BufEntry stored a raw cosine and the eviction loop compared two of them.
The map is monotonic so the ranking was never wrong, but it left a bare
cosine as a decision variable; it now stores the calibrated probability.
The [AR-018] Catch2 tag previously sat on the spread gate, reporting the
replaced mechanism as verification of its replacement. It now sits on the
band: both bounds asserted exactly, since they are inclusive and an
off-by-one there is invisible anywhere else; refusal counted on each
side; and the config bounds driven away from the shipped defaults so a
hardcoded fallback fails. The case that carries the invariant is "band
thresholds probability, not cosine" — under a calibration shifted by
0.10, cosine 0.84 is admitted and cosine 0.92 refused, the opposite of
their raw verdicts. A raw-cosine gate passes an identity-calibrated test
by accident and cannot pass that one. 15 cases, 38 assertions, passing.
scene_preview.cpp takes the flag rename because it would otherwise
reference deleted Config fields. It still does not compile, for reasons
predating this change: it also reads track_max_embed_dist and
track_max_frames_missing, retired by the earlier AR-024 tracker work, and
constructs FaceTrackerFunc with one argument where the registry and
calibration are now required.
Two notes for anyone reading the chain. The main.cpp flag rename and the
AR-018/AR-024 register rows landed in
|
||
|
dtourolleandClaude Opus 5
|
ffdad9873d |
test: tag the untagged suites; correct two stale headers
Four test files and one node header carried no TRACES tag, so the requirements they verify read as implemented-but-unverified. Tagging a test is what distinguishes the two. test_calibration.cpp is AR-023; its three [report] cases verify GR-003 and are tagged separately, since the report is fitted from the same distributions but is its own requirement. test_similarity.cpp is the CI half of AR-026 — equivalence against hand-computed dot products, where throughput at scale is AR-027 and cannot run on this host. test_face_tracker.cpp is AR-007 and AR-008. Two headers described code that no longer exists. face_aligner_node.hpp still documented the RANSAC fit AR-005 replaced with an Umeyama least-squares fit over all five points — not merely out of date but the opposite of what the file does, and it reads as a rationale for discarding the landmarks AR-030 measures. test_face_tracker.cpp still described the park/revive branch AR-008 deleted, and the raw-cosine cut_revive_sim that guarded it, which AR-024 retired. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> TRACES: AR-005, AR-007, AR-008, AR-023, AR-026, AR-030 | GR-003 | SR-001, SR-002 |
||
|
dtourolleandClaude Opus 5
|
b4318f8d9e |
fix: belief accumulates across frames (lazy-OR), not once
A track recognised on 318 of 385 frames was owned on none, so the truth file named nobody while the matcher was accepting almost continuously. The correlation discount was an annihilator rather than an attenuator. Weight was 1 - P(same view), so once a track had one stored view every later frame of that same face scored ~0.01 and the belief stopped moving. One observation just over the accept threshold is logit(0.78) ~ 1.27, under the ownership bar — hence recognised always, owned never. Two changes, in the order they were found. Correlated evidence is now attenuated by effective sample size, n_eff = n / (1 + (n-1)·rho), each frame contributing the marginal gain. That has the right shape at both ends: uncorrelated evidence accumulates linearly, and a held pose converges on 1/rho rather than growing without bound. A constant floor was tried first and rejected — it grows linearly forever, so a long shot could out-argue genuinely varied evidence purely by lasting longer. Combination is now weighted lazy-OR: P = 1 - (1-P_old)·(1-p)^w, stored as log(1-P) so the update is additive and precision stays where it matters as P approaches 1. Each frame is new evidence that this track is that actor, and the belief is the probability that at least one sighting was right. It converges faster than summing log-odds at the same effective count — 2.98 vs 2.53 after two observations at p=0.78 — which is what a real clip needs. Note that summing log-odds was already a correct sequential Bayesian update: the matcher fits with prior 0.5, so logit(p) IS the per-frame log-likelihood ratio and the running sum carries the prior forward. It was not wrong, it was slow. What blocked ownership was the discount, not the combination rule. Also fixes a real correctness bug: the observation count lived on the discounter, which is shared by every track, so tracks pooled into one effective sample and each was discounted by how many others happened to be on screen. It is now a per-track parameter. The registry's frame scope holds its lock for its lifetime and the mutex is not recursive, so calling observe() inside a scope self-deadlocks. The pipeline never does — separate nodes — but the test did, and hung rather than failing. Documented at the call site. Verified end to end: the same clip that produced zero actors now identifies Bing Crosby and Dorothy Lamour with belief 0.97. Suite: 96 cases, 6142 assertions. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> TRACES: AR-025 | SR-002 |
||
|
dtourolle
|
af5208035e |
docs: the RANSAC aligner was a defect, measured
AR-005 replaced cv::estimateAffinePartial2D(..., RANSAC, 3.0) with Umeyama least squares over all five points — the estimator InsightFace aligns with, and so the one the ArcFace/LVFace training crops were produced by. The first note here assumed the two agree wherever RANSAC keeps all five points, leaving a small divergence on non-frontal faces. Measured on 400 gallery headshots with the model held fixed, that was wrong: the crops disagree by a median 17 source px and 83.5% embed below cos 0.99 of their Umeyama counterpart. A 4-DoF similarity is exactly determined by two points, so every minimal sample fits its own pair perfectly and is scored on the other three; real landmarks sit a median 2.74 canonical px from any similarity fit, so a landmark outside the 3 px band is the common case and RANSAC returns an under-determined transform. How much that cost in accuracy is a separate question, and the honest answer is less than those numbers suggest. Rebuilding the full gallery moved the intra/inter separation the AR-023 calibration is fitted from by 0.583 to 0.590: the old warp was wrong but self-consistent, gallery and probe both went through it, and the embedder tolerates framing variation. The sharper evidence is duplicate detection — the rebuild dropped 1614 near-duplicates against the original build's ~100, because unstable two-point fits gave near-identical images visibly different vectors. That instability, not a headline accuracy delta, is what a tracker accumulating evidence across frames was paying for. Also records the AR-030 residual's real-data floor: on the most cooperative images the pipeline sees, it runs a median 2.74 px, so landmark noise occupies the first few pixels and the synthetic foreshortening ladder is optimistic about the low end. Any discount curve has to treat that range as uninformative rather than as mild pose, and VR-012 must set thresholds against the measured distribution. Tests carry the tag they verify: the residual's roll/scale invariance and monotonicity under foreshortening are what make it a pose measure rather than a pose-and-everything-else measure. TRACES: AR-005, AR-030 | SR-002 |
||
|
dtourolle
|
81ec77625c | Merge branch 'feature/gallery-report' into feature/opencv5 | ||
|
dtourolleandClaude Opus 5
|
1dfd6fea11 |
feat: gallery build report
GR-003 — the calibration fit already computed per-actor dedup counts, how many actors are eligible for positive pairs, and a 200-bin histogram of the intra and inter distributions, then discarded all of it to stderr. Nothing persisted, so nobody could audit whether a gallery was any good. The report is written alongside the gallery at build time. That is the right moment: the matcher fits the same sigmoid at analysis time, but by then the answer is per-run and nobody is looking, whereas build time is when a gallery's quality is actually decided. What it surfaces, in order of usefulness: - actors with no usable image — a silent recall ceiling, since the pipeline can never name them and nothing else says why - actors below the positive-pair threshold — not broken, so nothing complains; they just quietly weaken every threshold downstream - near-duplicate references removed, per actor and total - the fitted calibration AND the two distributions behind it That last one is the point. Every threshold in the pipeline is expressed in the probability space this sigmoid defines, so if the distributions overlap heavily the calibration is weak and every downstream decision inherits it — while the gallery still looks fine from the outside. The gallery-derived prior, intra/(intra+inter), is computed and reported but the shipped default of 0.5 is deliberately left alone. The spec records these as disagreeing; now the real value is visible, so the decision can be made on evidence rather than argument. Three tests: a zero-image actor is visible in the report, an under-referenced actor is counted, and the report round-trips through JSON. Suite: 95 cases, 6142 assertions. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> TRACES: GR-003 | SR-001 |
||
|
dtourolleandClaude Opus 5
|
c843c4abe3 |
feat: banded admission for the per-subject embedding store
AR-018 — an embedding joins a track's store only if its similarity to something already there falls inside a band, rather than merely being far from the gallery. Above the upper bound it is redundant: another look at a pose the store already covers, teaching the annex nothing while costing a slot a novel view could have used. Below the lower bound it is suspect: within one track every face is the same person by construction, so an embedding unlike everything else on the track is evidence that construction failed — a track-ID collision or a bad detection. Admitting it is exactly how an actor's annex gets poisoned with someone else's face. The old gate had only the upper half of that idea, expressed as a raw cosine against the gallery. Both bounds are now calibrated probabilities (AR-024), so the same number means the same thing here as in association and evidence weighting rather than three different things. This catches track-ID collisions EARLIER than the spread gate did — at the door rather than at promotion — so the buffer never becomes two-person in the first place. The spread gate stays as a second line for a track that drifts gradually instead of jumping. The existing test was asserting the mechanism rather than the outcome, so it was rewritten to assert what actually matters: whichever gate fires, the outsider must not reach the annex. Rejections are counted. A store that admits nothing is as broken as one that admits everything, and neither is visible otherwise. Band defaults 0.90-0.95 are working values pending VR-007; the two bounds fail in opposite directions and must be swept separately. Suite: 92 cases, 6133 assertions. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> TRACES: AR-018, AR-024 | SR-005 |
||
|
dtourolleandClaude Opus 5
|
cc1bed92d8 |
perf: back the CPU similarity GEMM with OpenBLAS
The CPU path was a scalar triple loop. It is the correctness oracle for the GPU backends, but it is also what CI runs — there is no GPU on the N100 host — and since AR-003 removed the per-frame face cap, a crowded frame now scores many faces against a library-scale gallery. Scoring one face against 5000 embeddings is 2.6 MFLOP; in scalar that does not hold up (AR-027). S(g,f) viewed as row-major [n_faces x n_gallery] is exactly query * gallery^T, so the loop nest collapses into a single cblas_sgemm. OpenBLAS is optional in the build: found via pkg-config, and the scalar path remains when it is absent so no hard dependency is added and the two can be diffed when a similarity looks wrong. The configure step warns rather than failing, since a developer without it should still get a working tree. The test target links it too. Without that the suite compiles the scalar fallback while the builder image ships CBLAS, so CI would be verifying a kernel that is not the one running in production — the same class of mistake as testing a path the gate never executes. Recorded as required (not optional) in the DP-007 image, for the same reason. Suite: 92 cases, 6136 assertions, with CBLAS compiled in. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> TRACES: AR-026, AR-027, DP-007 | SR-001 |
||
|
dtourolleandClaude Opus 5
|
61e487fbee |
test: replay the real tracker and registry from committed fixtures
Tier T2 — composition rather than units. The registry tests construct awkward states directly; these feed the pieces real 480x360 footage with the cuts, gaps and crowded frames that synthetic input does not produce. Six cases: - fixture integrity: exact frame and face counts, contiguous face_offset, and the embedder identity each dump carries (GR-004). The counts are asserted exactly rather than approximately, which was impossible before AR-004 — what a lossy run dropped depended on timing. - determinism: replaying a fixture twice gives identical track ids and windows. This is the property the whole fixture strategy rests on; without it every golden output derived from a fixture is unreliable and the CI replay tier is worthless. - every face is assigned a track, and flush leaves nothing open — a track still live at EOF is a window that never reaches the output. - windows are well-formed and inside the clip. A window ends at the last sighting, so it can never extend past the footage that produced it. - a longer extinction window yields fewer, longer tracks. On the sparse fixture (140 faces over 385 frames) that is the difference the constant actually makes: absorbing a gap versus splitting a window. - the cut-heavy fixture still contains cuts. This guards the corpus, not the code: a regeneration that produced cut-free fixtures would leave the association tests passing while silently testing nothing. Driving the functors directly rather than through a KPN network is deliberate — no threads, no channels, no scheduling, so the same input gives the same output. Suite: 86 cases, 6106 assertions. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> TRACES: AR-004, AR-012, AR-013, VR-001, VR-002 | SR-002 |
||
|
dtourolleandClaude Opus 5
|
e9aea3fc41 |
feat: tracker owns no state; association is frame-dependent and calibrated
Three requirements land together because they cannot be separated. The cross-cut revival branch was the only user of cut_revive_sim, so retiring that raw cosine forces the pool collapse, and collapsing the pool removes the only caller of the constant. Splitting them would have produced an intermediate commit whose only purpose was to be split. AR-008 — FaceTrackerFunc no longer keeps its own tracks_/inactive_ maps; it holds a shared_ptr<TrackRegistry> and operates on it directly. Two parallel copies of track state could disagree, and every divergence would surface as a wrong presence window with nothing to indicate it. There is now ONE candidate pool: last_seen alone says whether IoU is meaningful. The park/revive path is deleted outright — matching a dormant track is ordinary inter-frame association, and continuity falls out of the embedding comparison the tracker already did rather than being a mechanism of its own. AR-007 — track_alpha becomes the base weight for ordinary frames only. Association drops to embedding-only when position carries no information: on is_cut or is_scene_boundary, because the viewpoint changed, and for a dormant track, because time has passed since its box was last valid. The second case matters as much as the first and had no equivalent before. AR-024 — association cost is a calibrated probability, never a raw cosine. The tracker takes the calibration belonging to the active embedder, the same function object EvidenceDiscounter uses. track_max_embed_dist becomes track_assoc_min_prob, which means the same thing for every model, gallery and face size, where a bare cosine threshold did not. Retired: track_max_embed_dist, cut_revive_sim, cut_inactive_max_frames, and track_max_frames_missing — the last superseded by the registry's extinction window. That one is worth naming: a frame count silently changed meaning with sample_fps, so the same configuration behaved differently at 1 fps and 5 fps. Extinction is in seconds and lives in one place. Tests rewritten rather than deleted. The old cases asserted revival by raw cosine; the same behaviours are now asserted through the registry — a face lost across a cut and re-associated is the SAME track, one unbroken window, and a face returning past the extinction window is not. Added the case AR-007 exists for: two people swap screen positions across a cut while keeping their faces, and identity must follow the embedding rather than the box. Suite: 80 cases, 3250 assertions. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> TRACES: AR-007, AR-008, AR-024 | SR-002 |
||
|
dtourolleandClaude Opus 5
|
843852e19c |
feat: registry owns correlation discounting (AR-024, AR-025)
Moves two responsibilities inside the registry that callers should never have been trusted with. AR-025 — per-frame evidence is discounted for correlation by the registry itself, via EvidenceDiscounter. Log-odds accumulation is only valid for independent observations, and consecutive frames of one track are anything but: near-identical pose, lighting and expression. Accumulated naively, thirty frames of the same face at the same angle drive the posterior to certainty on what is effectively one measurement. Each observation is weighted by how much it adds — a view already contributed counts for ~nothing, a genuinely new pose counts in full. This reuses the novelty judgement gallery expansion already makes rather than inventing a second one. The discounter is a separate class the registry holds, so it stays testable and swappable, but it is a constructor argument rather than an option: there is no correct way to accumulate without it. AR-024 — observe() takes a calibrated probability and converts to log-odds internally. A caller can no longer hand it a raw cosine, which would have been silently wrong rather than obviously so. Retiring the remaining raw-cosine constants in the tracker is still open. DeadTrack now reports effective_obs alongside observations: the raw count and the evidence that actually counted. A large gap between them is a track the camera stared at, and worth seeing. Three tests, one of which is the point: two tracks given the same number of observations at the same posterior, one repeating a single view and one seeing eight distinct ones, must not end up equally confident. Without discounting they would be identical. Fixed a test that asserted a belief swap on tied evidence. A tie leaves ownership where it is — a challenger must out-accumulate the incumbent, since one contrary observation is noise. The original test passed only because it fed raw log-odds directly. Suite: 78 cases, 3245 assertions. Coverage 20/63 to 22/63. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> TRACES: AR-024, AR-025 | SR-002 |
||
|
dtourolleandClaude Opus 5
|
f0c7126f80 |
feat: TrackRegistry — presence follows track extent
The spine of the redesign. Presence is now the extent of a track an actor owns, [first_seen, last_seen], rather than the subset of frames in which recognition happened to succeed. An actor recognised only at the end of a long track is present for all of it, which is what the scene-scoped ground truth actually records. AR-013 — `last_seen` as an optional carries the entire liveness state: unset means on screen, set means went off at that timestamp and still revivable, reaped means emitted and erased. No missing-frame counter, no expired flag. It subsumes the tracker's existing two-pool split, so there is no separate revival path — matching a dormant track is ordinary inter-frame association. The asymmetry is the point: interior gaps are claimed, the trailing cool-down is not. A face lost and re-associated within the timeout never closed its track, so the gap is presence — someone briefly occluded has not left the scene. But a track that dies ends at its last sighting, never at the death time. That is precisely the over-claim the retired extinction_sec keep-alive produced, where presence ran on into the closing credits. AR-014 — a belief swap A→B closes the track and opens a successor at the swap frame. Not a correction: two non-twins both clearing the threshold on one face is not realistic, whereas a track_id carried across a viewpoint change onto a different person is. Treating it as a swap-and-continue would emit one window blending two people; treating it as a boundary yields two that are each right. AR-015 — two live tracks owned by one actor means at least one is wrong, since a person cannot be in two places at once. A reverse index catches it on the update that causes it rather than by scanning. This makes identity a third cut detector, independent of the histogram and TransNetV2 and firing where those failed. AR-016 — flush() closes tracks still live at EOF. Without it a film ending mid-shot silently drops its closing cast, which presents as a recognition miss rather than a bookkeeping bug. Reaping hands the dead track to the aggregator and erases it, so the registry holds only live tracks and its size is bounded by concurrent on-screen faces rather than growing with the film. Locking: a frame's association pass is atomic as a unit via FrameScope, since per-call locking would let another thread observe a half-updated frame. owner() reads tally and verdict under one lock — separately, a track could be both unowned and owned within a single promotion decision. A vote for an already-reaped track is dropped and counted, because a nonzero count means the timeout is shorter than the matcher's lag. 11 unit tests, driven directly against the registry with no network and no fixture — the awkward cases are constructed rather than hunted for. Suite: 75 cases, 3236 assertions. Coverage 14/63 to 20/63. Not yet wired into FaceTrackerFunc; that is AR-007/AR-008. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> TRACES: AR-012, AR-013, AR-014, AR-015, AR-016, AR-017 | SR-002 |
||
|
dtourolleandClaude Opus 5
|
908d166173 |
feat: bind galleries to the embedder that built them
GR-004 — a gallery built with one embedding model is meaningless with another. Cosine similarities across models are garbage but look entirely plausible, so this fails silently and expensively; every measurement taken against a mismatched pair would have been quietly wrong. The stamp is the model basename plus a SHA-256 of its bytes, with embed_dim as a cheap extra guard. The hash decides and the name explains, because neither works alone: a name is a promise rather than a fact — models get re-exported in place under an unchanged filename, which is exactly the case where the weights differ and nothing else does — while a bare hash mismatch tells an operator nothing actionable. Mismatch is fatal in every mode with no bypass. Unstamped only warns, because unstamped is unknown rather than known-bad, and an error firing on every legacy gallery trains people to reach for the bypass reflexively. scripts/stamp_gallery.py binds an existing gallery in place with no re-embedding, so the warning is a migration step rather than a permanent state; --require-gallery-stamp promotes it to an error once a site has migrated. Two gaps found that would have defeated the requirement outright: - Embedding dumps carried no stamp, so a replay — which has no live embedder — had nothing to check the gallery against. Dumps now carry embedder_model and embedder_sha256 as root attributes. Additive; schema_version stays 1. This is the same gap the dump audit identified independently. - --merge produced one file holding two embedding spaces, which no later check can untangle. Merge paths now verify before writing. The stamp also survives identity_matcher's calibration write-back, which would otherwise have stripped it on the first analysis run — the check would have worked exactly once. Conflicts resolved additively: both branches appended a source to sae_gallery and to the test target, and both edited the GR-004 register row. Merged suite: 64 cases, 3199 assertions, passing on CPU with no GPU. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> TRACES: GR-004, VR-001 | SR-001 |
||
|
Claude
|
7db40f430d |
GR-004: bind galleries to the embedder that built them
A gallery is only valid for the embedder that produced its vectors. Cosine
similarities across models are meaningless but *look* plausible, so the mistake
is silent and every measurement taken afterwards is suspect. Stamp the embedder
identity into the gallery at build; verify it at every load.
The stamp is the model file's basename plus the SHA-256 of its bytes (plus
embed_dim). The hash decides, the name explains. A name alone is a promise
rather than a fact — models get re-exported and overwritten in place under an
unchanged filename, which is exactly the case where the weights differ and
nothing else does. A hash alone is correct but unactionable in an error message.
SHA-256 is derived from the artefact, needs no registry kept current, and costs
~0.1s for a 250MB ONNX, memoised per process.
Mismatch is a hard error in every mode, with no bypass, naming both sides.
Unstamped legacy galleries warn loudly and proceed: unknown is not known-bad,
and hard-failing every pre-existing gallery would turn the check into something
people disable rather than trust. --require-gallery-stamp (or
SAE_REQUIRE_GALLERY_STAMP=1, which propagates to subprocesses) promotes that to
a hard error — the mode measurement work should run in. scripts/stamp_gallery.py
re-binds an existing gallery with no re-embedding, so "warn" is a cheap state to
leave rather than a permanent one.
Embedding dumps carry the same stamp: a replay has no live embedder, so the dump
is the embedder as far as the gallery is concerned. Derived galleries inherit
their source's stamp; --merge and the JSON gallery merge check before writing,
since one file holding two embedding spaces cannot be untangled afterwards.
Verified in: scene_analyze, scene_preview, the sae_kpn matcher binding,
replay.py, optimize.py (once per film at startup, before the first evaluation),
movienet_eval.py and both merge paths.
Stamp logic lives in src/gallery/embedder_stamp.{hpp,cpp} and its Python twin
scripts/sae_stamp.py, kept dependency-light so replay subprocesses do not pay
sae_gallery's requests/Pillow import to ask whether two models match.
Tests: 12 new cases in test_gallery_store.cpp covering the comparison logic,
both round trips, and the SHA-256 vectors that guarantee the C++ and hashlib
stamps agree. No ONNX or GPU required.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
dtourolleandClaude Opus 5
|
45ef7c1916 |
Add the v1 audio signature to the pipeline (IR-004, IR-005, IR-007, IR-008)
Implements the content-derived spectral-peak signature from JRay-public-server/SPEC.md §3 so a truth file is self-identifying: 120 s window centred on the media midpoint, mono at 11025 Hz, 4096/1024 Hann STFT, 32 log-spaced bins over 300-3000 Hz, one byte per frame (5-bit peak band + 2-bit energy class), base64, `v1:` prefix. Audio decode is a second stream from the FFmpeg libraries the pipeline already links for video; libswresample is added to the existing ffmpeg_libs interface target. The FFT is written out rather than pulled from a library for the same reason the plugin vendors one: the output has to be bit-identical across two languages, so a dependency whose version could change the numerics is a liability. The server spec fixes the geometry but not enough to reproduce a byte stream — Hann periodicity, band aggregation, the energy-class definition, tie-breaking and the base64 alphabet are all unconstrained by it. Those are pinned in audio_signature.hpp and mirrored in the golden fixture, so the plugin can be implemented from the fixture alone. IR-005: tests/fixtures/audio/ carries a deterministic 120 s tone (FLAC — lossless, so identical PCM to the WAV make_fixture.py emits, and 3.5x smaller in git) plus the signature it must produce, the decoded-PCM checksum and the full parameter contract. That directory is the artefact shared with the plugin repo; the PCM checksum is separate from the signature so a codec-level difference is distinguishable from a DSP one. IR-007: media under 120 s emits no signature. Same for a file with no audio stream or one that will not open — UR-9 is an enhancement and must never be able to break a fetch. Verified against an independent Python reference implementation: same bytes. All 32 bands and all 4 energy classes appear in the golden vector, and the window-centring test wraps the fixture in 90 s of silence either side and requires the golden value back. Not wired into the truth-file output yet — that is the schema_version bump under IR-002/IR-003 and is deliberately out of scope here. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolle
|
76df2f66aa |
test: add Catch2 unit test suite (gallery, calibration, tracking, similarity)
GPU-free, model-free tests for the pure logic: gallery HDF5 save/load round-trips (actors, embeddings, embedded calibration) and legacy JSON read back-compat; the calibration sigmoid fit, boundary inversion, and the in-memory hash-keyed cache reuse/staleness; TrackGallery's diversity-buffer eviction, novelty/spread safety gates, and promotion; FaceTracker's IoU/ embedding association and cross-cut track revival; and the GEMM similarity backend (forced to CPU so the suite runs without a GPU). Verified: all 39 test cases / 1640 assertions pass (cmake -DSAE_BUILD_TESTS=ON). |