417 Commits

Include renames

Author	SHA1	Message	Date
dtourolleandClaude Opus 5	ec740115b6	Spec the face pipeline on SCRFD and MobileFaceNet ... FR-CULL-8..12 specify the subsystem in terms of "a 512-dimension embedding from a stated model" and stop there, because D13 was open. This names the models, and grounds them in the measurements and the working C++ pipeline in ../scene-actor-extraction rather than in a literature reading. The licensing half of D13 stays open, but with a route through it: the InsightFace weights are non-commercial and cannot be committed, so the app ships the code and the user fetches the model. faces.model_id already makes that a survivable choice. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-26 19:44:39 +02:00
dtourolleandClaude Opus 5	8d8d6491ad	Say how spot removal is going to work before writing it ... FR-DEV-8 is the last develop requirement with nothing behind it. The pipeline it lands on already has most of the parts — the neighbourhood stage, the mask crate's normalised coordinates, the gradient handles' canvas drags, the merge-by-id rule — so the spec is mostly about the four things that are genuinely new, and about the two places where the obvious implementation is the wrong one: a Poisson solve is sixty dispatches per spot, and a per-frame readback to find out what colour a sky is would undo ARCH §6.1. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-26 19:43:30 +02:00
dtourolleandClaude Opus 5	b9ee29f3c7	Regenerate the traceability matrix for the Ilford stocks ... Same drift as before and for the same reason: the matrix links to line numbers, and the grain work moved lines in files that carry tags. The stocks bring six new files and ten new tags -- 227 scanned against 221, 614 found against 604 -- all on requirements that were already covered, so coverage is 51.4% (91/177) either side. Twelve rows move and nothing else changes. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-26 10:14:29 +02:00
dtourolleandClaude Opus 5	40e6334bb1	Sign the APK with a real key when one is configured ... The APK has been debug-signed with a key generated on the spot, which is right for putting a build on a test device and useless for anything else: a different signature every run, so nothing can ever update in place. Four secrets now select a real signature -- ANDROID_KEYSTORE_BASE64 and its password, alias and key password. The names are JellyTau's, because that repo already signs its Android build this way against this same runner and one convention across both is one thing to remember. Absence of the secrets is not an error. A fork or a branch build has no access to them and should still produce an installable APK, so the debug path stays exactly as it was. The reverse is an error: if a keystore is supplied and cannot be read, the build fails rather than quietly falling back to a debug key, because a release that is silently debug-signed is worse than no release. Passwords reach apksigner and keytool as `env:`, never `pass:`. `pass:` puts the password in the process table for anything on the box to read. The keystore is written to a 0700 mktemp directory and never into the workspace, which is both what actions/cache saves and what the upload step globs. Also: upload-artifact drops from v4 to v3. v4 was a guess about what this Gitea supports. v3 is what JellyTau uploads its APK with on this runner today, which makes it the version known to work rather than the one that ought to. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-26 10:13:50 +02:00
dtourolleandClaude Opus 5	8b07a90e71	Regenerate the traceability matrix the clippy pass moved ... `traceability-check` fails on master: the committed matrix does not match what the generator produces, so the gate that exists to keep the two in step is the thing reporting they are not. Nothing was traced or untraced. Coverage is 51.4% (91/177) before and after, the same 604 tags against the same 177 requirements; every one of the 32 changed rows is a line number that moved when the clippy warnings were cleared -- `adjust.rs:2150` is now 2164, 632 is 651, 751 is 770. The matrix links to lines, so touching a file above a tag rewrites its row without changing what it says. Regenerated with `cargo run -p traceability -- report`, which is what the failing step tells you to run. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-25 23:21:13 +02:00
dtourolle	6925aa2a86	Merge master into film-simulation ... Master gained the library's index paging while this branch was building the film simulation, and the two met in library_ui.rs. Only the generated traceability matrix conflicted; it is regenerated here rather than hand-resolved, which is what it is for.	2026-08-25 20:34:28 +02:00
dtourolleandClaude Opus 5	6d18517d28	Ship every stock that exists, black and white included ... Three profiles was what the first cut needed to prove the model. This is the rest of the open data: 23 camera stocks and 9 papers, which is all of spektrafilm. Black and white was the gap, and it turned out not to be a gap in the data -- it was a gap in where I looked. Upstream's `main` has 28 colour profiles and nothing monochrome; `dev` has three more, and they are Tri-X, Double-X and the 2302 print film they go onto. So the answer to "do we have B&W" was yes all along, and it needed the dev branch rather than a fortnight digitising Ilford's datasheet graphs by eye. Those three are pinned to `dev` per stock; the colour stocks stay on the released branch. A monochrome profile is single-channel -- one emulsion, not three -- and spreading that one layer across all three is exact rather than an approximation: three layers with identical sensitivity and identical curves respond identically, which is what one layer does. The dye is the trap. The renderer *sums* the three layers' contributions, so replicating it unchanged renders every frame three times too dense -- neutrally, and therefore plausibly. A third each reconstructs the single emulsion, and two tests hold both halves: that the densities stay equal, and that they sum to one emulsion and not three. Double-X and 2302 ship five curves apiece, measured at five development times -- 4 to 12 minutes for Double-X. That is push and pull processing as measured data. The standard 6.5 minutes is what ships; the rest is in the upstream file waiting for a control to ask for it. Two stocks are `support: film` and are nevertheless what a negative is printed *onto*: the cine projection films 2383 and 2393, which the Vision3 stocks print to. Filtering the picker on support alone offered a projection stock as something to load in a camera, so it filters on stage, with a test saying so. The picker had to change shape twice over. Chips were right for three stocks and off the edge of a 280px column at twenty-four, and the column that replaced them was a thousand pixels standing between the photographer and every slider below. It is a disclosure now: one row carrying the answer, opened to change it, closed again on choosing. That is the opposite of the argument this panel used to take the lids off its sliders, and deliberately so -- an instrument you compare wants to be visible, and a list you consult once wants to be out of the way. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-25 20:30:11 +02:00
dtourolleandClaude Opus 5	3330f350a4	Move the timeline marker from the window the grid already read ... The last of the per-scroll queries, and the strangest of them: this one got slower the further down the library you had scrolled. The marker has to follow every scroll event or it advances in jerks while the photographs beside it move smoothly — that part is right and stays. What was wrong is that each event asked the catalog `LIMIT 1 OFFSET n`, and that is not a seek: SQLite reaches row `n` by producing and discarding the `n` rows before it. 0.02 ms near the top of the library, 0.7 ms at twenty thousand, per row crossed, on the thread drawing the frame. A flick therefore got choppier the longer it went on. The window the grid has already read holds the answer, and since the loaded window now covers the whole view, the row is nearly always in it. So this is a vector index at the position the ordinal has in the window, and the query survives only as the fallback for a row outside it — briefly, after a scrub or a keyboard jump, before the load lands. The fallback is also the less correct of the two, which is worth recording rather than quietly keeping: it counts in a dated-only ordering while the argument is a grid row, so the two disagree wherever undated frames sit in between. It is kept because a marker about to be corrected is not worth a second index, and because being wrong there is what it always did. The window path has no such disagreement — it reads the very cell the row belongs to. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-25 20:01:51 +02:00
dtourolleandClaude Opus 5	0f231afe85	Stop re-answering questions about the library every time the window moves ... The timeline's bars, the filter chips' counts, the "on this device" count and whether the scoped collection is pinned all describe the *library*. None of them can change because the view scrolled. `load_window` recomputed all four every time the window moved, which is several times per screenful. Together that is a `MIN`/`MAX`, a `GROUP BY`, two counts, and under a collection three more queries — about 8 ms of SQLite on the thread that is trying to draw the frame, for four answers that were already on screen and already right. They are now keyed on what they actually depend on: the scope, the filter, whether this is the trash, and the total. The total earns its place as the change detector as much as for the scrollbar — a scan landing, a delete or a restore all move it, and it was already read on every load. What a total cannot see is a rating edited under an unchanged count. That is covered, and deliberately not by widening the key: `apply_judgement` already refreshes the chips itself, because it has to report what actually landed rather than what was asked for. Same for the axis — a zoom, a pan, a scrub and dates arriving from the thumbnail worker each call `refresh_timeline` directly. Skipping the recompute here cannot leave anything stale on screen. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-25 20:01:39 +02:00
dtourolleandClaude Opus 5	6d6ef8d34b	Page the grid along an index instead of sorting the library each time ... Scrolling jittered, and this was the largest single reason. Every window the grid loads is `ORDER BY ... LIMIT n OFFSET k`, and neither half of that was being answered the cheap way. **The sort.** `GRID_ORDER` leads with `captured_at IS NULL`, so undated frames fall to the end. No ordinary index answers that — the leading term is an expression, not a column — so SQLite sorted the whole library into a temp b-tree on every window read, then threw away the first `k` rows of it. Schema V7 indexes the expression exactly as the query writes it, partial on the same `shadowed_by IS NULL AND trashed_at IS NULL` the grid filters by, so the read becomes a walk along the index. **The join.** `LEFT JOIN remote` was paged *after* it was joined, so reading 280 cells at offset 20,000 first seeked into `remote` for all 24,000 rows and then discarded 23,720 of them. The file ids are now fetched for the 280 rows that survived — the shape the badge and rating reads already use, one query for the window rather than one per cell. Measured together on 24,000 images at offset 20,000: **15.2 ms → 0.36 ms**, inside a scroll handler that has 16.7 ms to draw a frame. The test asserts on the query plan rather than on a duration, because there is no other symptom. A `GRID_ORDER` edited out of step with the index, or a column added back that drags `remote` in again, both still return exactly the right cells — just after sorting the library — and the jitter would come back with nothing to point at. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-25 20:01:04 +02:00
dtourolleandClaude Opus 5	baa8957e80	Let a photographer choose the film, and remember which one ... The stock model rendered correctly and nothing could ask for it. This is the picker, and the sidecar key that makes the choice outlive the session. How the choice persists was the open question, and the answer was already written down twice in sidecar.rs: `rating` is a top-level key "because a rating is not an edit", and `masks` are one "because a layer is not a scalar". A stock is that kind of thing -- a choice of material, not a number a slider moves -- so it is a top-level key too. It stores the **id**, not an index. Stocks are files that users add, so an index would mean installing a profile silently changed which film every existing photograph had been developed on. A name this build has no profile for still round-trips untouched, because the alternative is that syncing to an older phone quietly un-develops the picture. Only the names travel. Turning one back into tables needs the profile database, which dr-pipeline deliberately does not link, so `Version::apply` clears the film and the session re-bakes -- after the parameters, because the bake reads the film's own exposure sliders and the print balance is solved against them. That is also why moving those sliders rebuilds the lookup where no other control in the panel does: an enlarger's filtration depends on how the negative was exposed. The panel keeps its rule. It still names no operation and still generates every control from a declared parameter kind; the stock gets a bespoke control beside those, exactly as the mask stack does, and for the same reason. The film's exposure and print exposure arrive as ordinary generated sliders. Two defaults worth stating. Picking a colour negative prints it, because an unprinted one is an orange strip and offering that as the first thing somebody sees after choosing Portra reads as a bug rather than as a choice -- the toggle is there for anyone who wants the scan. And a paste carries no film: a preset is a parameter map, and a stock is not a parameter, so pasting one would paste a choice the clipboard never took. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-25 19:57:41 +02:00
dtourolleandClaude Opus 5	4a2fcb6d22	Render a film stock on the GPU, and let it take over the rendering ... The stock model landed in dr-film with no way to see it. This is the pipeline node, the two texture bindings it reads, and the end-to-end test that proves the shader agrees with the model. The design point is that a film simulation is not an adjustment. Every other node changes a picture; this one makes it. A stock's characteristic curve does the camera profile's base curve's job -- from measurements rather than from a curve somebody drew -- so running both renders the scene twice: the camera's rendering, and then a film's rendering of that. It looks like neither, and it reads as a colour-management bug with no colour-management bug to find. So `Operation::renders` is new. A node declaring it takes camera RGB and hands back linear sRGB, and the composer emits neither the base curve nor the conversion out of camera space. Both halves move together, and the composer keeps them as one string precisely so that getting half of it right is impossible. The tables are not parameters, for the reason vignetting's coefficients are not: they are measurements. dr-pipeline declares the layout as a plain struct and keeps its no-dependency property; the two crates share no types on purpose. `EditGraph::set_film_tables` offers them to every node rather than to the one that wants them, because knowing which concrete type is which is what the graph is organised not to know. Bindings 4 and 5 follow the masks precedent: declared unconditionally so one bind group layout serves every generated shader, bound to 1x1 placeholders when no stock is loaded. Both are interpolated by hand with textureLoad -- this pipeline binds no sampler, and adding one for two lookups would cost a binding in every shader. Uploads are keyed on content so an unchanged stock does not push half a megabyte across the bus per frame. The end-to-end test earned its place immediately: it found the density lookup being filled z-fastest while a 3D texture upload wants x-fastest, so the red and blue axes were transposed. Green matched exactly, which is what that bug looks like -- a plausible photograph of the wrong colour, and one that every unit test on either side of the seam passes. dr-film now pins the layout in a test that needs no device, and states it where the field is declared. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-25 15:12:56 +02:00
dtourolleandClaude Opus 5	b6a95e1965	Simulate a film stock from its measurements, not from someone's grade ... FR-DEV-3f asks for look emulation and proposes HaldCLUT import to inherit the free film-simulation ecosystem. This takes the other road for the stocks where the measurements exist: run the physics. A stock here is its manufacturer's own datasheet -- spectral sensitivity, characteristic curves, dye densities. Light exposes three emulsion layers, the layers develop to densities, the densities are dyes that absorb, and what is left is what reaches the eye. A colour negative comes out orange and upside down because that is what a colour negative is; it becomes a photograph when a paper profile prints it, with the enlarger's filtration solved rather than dialled. What that buys over a LUT is that the parameters stay physical. Opening up a stop moves the picture along the film's real characteristic curve, shoulder and all, instead of scaling a number baked at one exposure. The data cost runs the other way too: a stock is 17 kB of published measurements where one HaldCLUT is 800 kB of one person's grade. It looks like it needs a spectral integration per pixel. It does not, and that is the whole design: - Exposure is a 3x3 matrix. The reconstructed scene spectrum is linear in the sRGB triple, so the integral collapses into nine numbers, exactly -- no approximation. - The characteristic curve is three 1D functions, sampled exactly. - Everything after that -- dye absorption, the print through the negative, the paper, the viewing illuminant, the adaptation -- takes exactly three numbers in, so it bakes into one 32^3 lookup. Per pixel: a matrix multiply, three curve taps, one fetch. Splitting the curve out of the 3D lookup rather than baking one LUT over exposure is measured, not assumed: the curve carries the sharp shape and the dye mixing is smooth, so folding them together would need three times the resolution for the same error. At 32^3 the worst error is 0.003 in linear sRGB, under one 8-bit code value, and a test says so. No wgpu dependency, deliberately, and the same isolation argument dr-lens makes: the model is plain f32 with a documented layout, so every property worth asserting is asserted on the CPU. Binding it to a texture is dr-gpu's job and is not done here yet. The expected values in tests/ came from a Python prototype running against a different colour-science stack. Agreement to three decimals is evidence about the model rather than about one implementation of it -- a transposed matrix or a mispasted observer row would pass every unit test and fail that one. Profiles are converted from spektrafilm by Andrea Volpato, CC BY-SA 4.0. The converter is in the tree and runnable, so what was changed from upstream is auditable rather than taken on trust; profiles/CHANGELOG.txt records it, including the one deliberate deviation -- Mallett & Yuksel's 1 kB basis instead of Hanatos's 4 MB table, which costs accuracy at the gamut edge and saves four megabytes. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-25 14:44:54 +02:00
dtourolleandClaude Opus 5	7c8e433911	Load the window around the whole view, not around its first cell ... The bottom row of the grid was often blank, at a scroll position the user could sit at indefinitely. Two numbers decided when the loaded window follows the view, they lived in different languages, and they disagreed. The grid loaded three screenfuls and Rust held the window still until the first visible cell was three quarters of the way through them. Three quarters of three screenfuls is 2.25, and the view itself is one screenful tall — so the bottom of the screen had already travelled a quarter of a screenful past the last loaded cell before anything moved. Those rows are not in the model, so nothing is drawn for them. The same margin was wrong upward, and exactly so. The window is placed a quarter of itself behind the view, and the margin then declared the view too close to the top at precisely that distance: every single row scrolled upward re-read the catalog, rebuilt all 360 cells and re-queried their badges and ratings, and so did the row after it. So the grid now reports what it shows — a screenful, counting the row the scroll position has cut in half, which `visible-rows` alone undercounts and which is exactly the row reported missing — and Rust owns the rest: four screenfuls loaded, placed a quarter back, and moved once the view comes within half a screenful of an edge of them. One decision in one place, and the test now walks the view the length of the library and asserts the window covers it at every step. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-24 19:48:58 +02:00
dtourolleandClaude Opus 5	33847a0bbc	Open one GPU device for the tests, and stop the checkout dying over LFS ... Two CI failures, unrelated except that both were mine. **The test binary faulted under parallel threads.** Every GPU test opened its own `GpuContext`, and `cargo test` runs on as many threads as there are cores — so a full run asked the driver to bring up a dozen Vulkan devices at once and died with SIGSEGV. Serially it passed, which made it look like flakiness rather than a fault in the harness. One device now, behind a `OnceLock`: a `GpuContext` is an `Arc<Device>` and an `Arc<Queue>`, so sharing it is a refcount, and the losers of the race block until the winner is done. 416 tests now pass in parallel, in half the time twenty-six devices took. **`lfs: true` on the checkout made the checkout fail.** The intent was right — the model is in LFS, a plain checkout writes a 133-byte pointer, and the build script panics on it — but on this server `git lfs fetch` is rejected at `/info/lfs/objects/<oid>` with a client error: the credential `actions/checkout` installs for git is not one the LFS endpoint accepts. So a fetch problem presented as a checkout problem and took the whole job with it. The object is on the server; a clean clone over SSH with `git lfs install --local` pulls all 11 MB of it. It is now its own step with an explicit token, and `continue-on-error` so a credential problem cannot masquerade as a broken checkout — if it fails, the build still runs and fails with the build script's own message, which names the real problem. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-24 19:36:34 +02:00
dtourolleandClaude Opus 5	6b5ffc6a93	Anchor the delete on what the view was showing, not on the window's start ... The grid still jumped. Anchoring on `offset` was wrong for a reason this file already states, a few hundred lines away: "the first *visible* ordinal, not the window's start: the loaded window deliberately begins a quarter of a screen above the view, so its first cell is one the user cannot see." Two things made `offset` the wrong number. It is a screen-quarter above what is being looked at, and by the point this runs it has already been re-clamped against the new, smaller total — so seeking to it moved the view somewhere the photographer had not been. A smaller jump than the original, and the same fault. `resume_at` is what the grid last reported as its first visible image, which is the photograph the person is actually looking at. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-23 19:38:27 +02:00
dtourolleandClaude Opus 5	cd64166b15	Keep the view on the photographs after some of them are deleted ... Deleting made the grid go blank and jump somewhere arbitrary. Two causes, both of them the viewport being left behind by everything else that moved. The Flickable is sized to the *whole* library so its scrollbar is a real address into twenty thousand images. Delete some and that content gets shorter, which leaves a view near the end scrolled past what now exists — cells sitting above a viewport looking at empty space. Slint does not pull a Flickable back on its own. (The clamp for that went in with the previous commit.) The jump is the other half. Cells are drawn at their absolute place in the library, `(i + offset) / columns`, and a delete re-clamps `offset` downward so the loaded window still fills. Nothing touches `viewport-y`, so the same scroll position now addresses different photographs and the grid appears to leap somewhere unrelated. `restore_position` re-anchors on the ordinal the view was showing, clamped into what is left. Not on the deleted image's own position, which no longer exists, and not on the top of the library, which would throw the scroll position away on every delete — after removing one frame from a wall of twenty thousand, the one you want next is the one that just moved into its place. Only on a shrink, and the shrink is detected by reading `library-total` before overwriting it. Re-anchoring on every load would fight a scrub, which sets exactly this property to go where the user asked. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-23 19:03:15 +02:00
dtourolleandClaude Opus 5	fa4ad6e2d6	Drag the date range on the axis it is chosen from ... The range could be turned on with a finger and not aimed with one. Its two ends were typed as `YYYY-MM-DD` into 108px fields behind a soft keyboard, to name days already drawn on the axis a thumb away; and the chip that seeds them takes its span from the timeline's zoom and pan, which are a wheel and a middle button. A touch screen has neither, so on Android the filter was a switch with no aim. The band is now on the timeline. Two ends with grips, dragged along the bars, released to filter — the histogram was already how a period is found, and this makes it how a period is stated. Both ends snap to whole days, which is what the typed fields mean, what `show_range` reads back out, and a floor under a range dragged shut. The fields stay for what dragging cannot do: name an exact day, and say in words what the range is. For that to work the axis had to stop following the range. Redrawn to the band, it moved the ground under the very handles doing the narrowing, and there was nothing outside the range left to widen back into. While there: a fixed number of equal bins instead of calendar buckets. Between one calendar unit and the next the bar count is free to wander by a factor of twelve, so zooming in halved it two steps out of three — the same picture drawn wider until it jumped back to fine. Equal bins also include the empty ones, so a bar's position on the track and the date under it are finally the same quantity; before, a library with gaps drew a February six months wide and the marker, the band and a click all pointed somewhere else. The count is a setting, 32 or 64, because the right answer is a question about the screen. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-23 18:42:42 +02:00
dtourolleandClaude Opus 5	b0b6dd559a	Show what is selected, and let a collection be made of it ... Three things a selection needed and did not have. **Seeing it.** The count existed — "12 selected" — in the header row, which scrolls sideways. On a tablet it sat past the right-hand edge along with every button beside it, so a selection was something you could make and then not see. A selection you cannot see is one you act on by accident. **Putting it down.** The only way to clear one was "Done", which also leaves select mode — so after filing forty photographs the next forty began by re-entering a mode the user had not meant to leave. Clearing is now its own action and keeps the mode. **Filing it somewhere new.** Making a collection of a selection took four steps: create one, find it in the tree, select the photographs again because creating it changed the scope, then add them. It is one press, which is how a selection is usually meant — it is gathered *because* it is going somewhere. The new collection is created at the top level rather than inside the current scope, unlike the tree's "+". A selection can be gathered from anywhere, including across collections, so filing it under whichever one happens to be open would put it somewhere its contents did not come from. It opens straight into its name field, for the reason `collection_new` already does: the placeholder name is nobody's choice, and making the user find the rename afterwards is asking them to finish a job we started. All of it on its own strip beside the date range's, appearing only while there is a selection — the third control this session that was invisible for being put in a row that scrolls. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-23 17:57:35 +02:00
dtourolleandClaude Opus 5	f9c7aba8b6	Regenerate the traceability matrix ... Six commits added nineteen TRACES tags between them and none regenerated the matrix, so the gate failed on every one of them — including the commit the release tag points at. The gate is doing its job: a matrix that disagrees with the tree is worse than none, because it is read as current. Coverage is unchanged at 50.3%; what moved is where each requirement is tagged, which is the half of the file that is actually consulted. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-23 15:00:45 +02:00
dtourolleandClaude Opus 5	b7bd2356be	Regenerate the traceability matrix ... The gate regenerates it and fails if the result differs from what is committed, which is what it is for: a matrix that disagrees with the tree is worse than none, because it is read as current. Stale since the detail stage landed — 160 files and 436 tags then against 180 and 521 now. Coverage 49.1% to 50.3%, and no orphan tags. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-23 10:26:59 +02:00
dtourolleandClaude Opus 5	d04087af83	Import into the library, which is on the server ... There was a local destination, defaulting to ~/Pictures, and an "upload" switch that could be turned off. That was wrong twice over. DarkRoom's library *is* a folder on a Nextcloud server (FR-NC-6) — there is no local library — so a user-chosen local destination built a second pile of photographs that no view in the application ever lists, and made "where did my import go" a question with two answers. An import now has exactly one destination and the page asks nothing about it. With no account there is nowhere to go at all, so Import is refused rather than quietly filling a folder. What lands on the device is a staging copy in a directory the app owns, the same shape `export` uses for its outbox and for the reason its module docs give: staging first is the only path, not a fallback for being offline. The bytes have to reach disk before the network — streaming a card straight to the server would let a move-import erase a card against an in-flight upload, and would make importing impossible with no connection (FR-NC-10). A staged file is removed once the server confirms it; one that is not confirmed stays queued, and the next import drains it. And the rule that was stated but never enforced: `retirable` was reported and `dr_ingest::retire` was never called by anything, so a move-import silently behaved as a copy. The card is now emptied by the worker, of exactly those photographs the *server* has confirmed — not those merely written here, because the staging copy is removed moments later and anything unconfirmed would then exist nowhere at all. FR-NC-7b said "copied locally first ... then queued for upload", which is a staging area; it has been rewritten to say so in terms that do not also permit what was built. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 21:09:26 +02:00
dtourolle	56dd3187f1	Merge integration into wip/ingest ... Second pass, against the detail-stage and thumbnail work that has landed since the first. Resolved and verified here rather than in the shared merge worktree, so what goes back is a fast-forward. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> # Conflicts: # docs/traceability.md	2026-08-22 19:44:42 +02:00
dtourolle	42f1f55fd3	Regenerate the traceability matrix ... The detail stage and its four kernels, the camera profiles, per-channel tone curves, keywords and export metadata all landed since the last regeneration.	2026-08-22 19:37:56 +02:00
dtourolle	5d15b753f7	Regenerate the traceability matrix ... Five branches merged since the last regeneration. Generated file, so the only correct version is the one produced once, here, from the merged source.	2026-08-22 19:31:22 +02:00
dtourolleandClaude Opus 5	28325af448	Make the thumbnails while the originals are still in hand ... An import read every byte of every original, uploaded them, and then left the grid to fetch a preview range back out of each one over the network — for files that had been on this machine minutes earlier. The pixels are now made from the bytes already in memory, on the fast path FR-CAT-3 names: locate the camera's own embedded JPEG, decode a few hundred KB, downscale, orient. Never a demosaic. A file with no usable preview yields none, which is not an error and simply leaves the grid to fetch one later. The filing waits for the upload, and only the filing. The shard store is keyed by `oc:fileid` (FR-NC-5) and that does not exist until the server has the file — so the thumbnail is made from the local copy and held until an id can be attached to it. One listing per folder supplies every id at once, rather than a PROPFIND per photograph over a link that may be mobile data. Best-effort throughout: a thumbnail that cannot be filed costs the grid one preview fetch later, and failing an import over it would be the wrong trade. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 19:20:13 +02:00
dtourolle	45214d3ca8	Regenerate the traceability matrix ... Four branches merged, each of which had regenerated this file against its own tree. Those versions all disagreed and none was right for the union, which is why the merges took whichever side was to hand and deferred to this: the matrix is generated, so the only correct version is the one produced once, here, from the merged source.	2026-08-22 19:01:39 +02:00
dtourolleandClaude Opus 5	f4c21c4e2c	Regenerate the traceability matrix after the merge ... Both sides added tags. 49.7%. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 15:53:25 +02:00
dtourolleandClaude Opus 5	939f33a3a3	Say on the import page where the photographs end up ... Three lint findings and the gap the third one was pointing at. `Context::library_label` was dead: the page named the folder on this machine and said nothing at all about the server, which is half of what the Import button commits to and the half that takes minutes rather than seconds. It now names both, and states the order — copied and verified here first, then uploaded (FR-NC-7b) — beside the destinations rather than beside the button, because someone watching a slow upload needs to already know the photographs are safe on disk. The label is cached when the page opens rather than read in `render`: reaching it goes through the context closure to the account, and `render` runs on every keystroke. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 15:49:02 +02:00
dtourolleandClaude Opus 5	98e0ad0537	Regenerate the traceability matrix ... FR-CAT-10, FR-NC-7a and FR-NC-7b gained implementations; the two new requirements also raise the denominator. 46.9% to 48.6%. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 14:01:01 +02:00
dtourolleandClaude Opus 5	5945f7420a	Say where an uploaded original lands ... FR-NC-7 specifies how bytes travel and deliberately has no opinion about where they go, and nothing else said either — so the one thing a photograph needs on arrival, a folder, was unwritten. FR-NC-7a gives it `{yyyy}/{yyyy}-{mm}-{dd}`, and two consequences the transport mechanics do not supply on their own: expansion is a pure function of capture metadata, so two devices computing a destination for the same frame agree; and the template governs placement on upload only, because the remote library is reachable by other clients and restructuring it under them is not ours to do. FR-NC-7b joins import to upload. A move-import must not erase the card until the upload is confirmed — a card erased against an in-flight transfer is the one failure in this application with no undo. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 14:00:13 +02:00
dtourolle	610f679881	Reconcile the three branches ... Two faults textual merge could not see. Both agents added a `mod tests` to masks_ui.rs — the module boundary was an artefact of them being written apart, and the tests do not overlap, so they fold into one. And `segment` lost its context argument when the work moved to a worker, which a test written on another branch still passed.	2026-08-22 13:33:55 +02:00
dtourolleandClaude Opus 5	96a7b405c2	Say which photograph the sliders are pointed at ... Selecting a mask layer silently re-points about thirty controls at that layer's chain. Same panel, same order, same sliders, different meaning — and the only thing that said so was a sentence in the panel above, which a photographer reaching for the exposure slider has no reason to read. An exposure change lands on the whole frame when it was meant for a face, or the reverse; both are silent, and both are discovered later. `ui-navigation.md` §1.1 calls it the dangerous one and it is: the others in that document cost time, this one costs work. The remedy is the classic one for a modal fault — make the mode visible — and the application already had the pattern. Crop arms a canvas interaction, draws an overlay, gives the column one job and is left by the control that entered it. Local masking is the same animal built as a peer panel, and that is what created the ambiguity. So `crop-mode` stops being a bare boolean and becomes one value of a three-state mode, which is the point: two modes could both be on before, and now that is not a state the interface can be in rather than one it is tested against. **One strip, not two.** The mode control was going to sit beside the group strip that filters the adjustments, which is two controls above one column answering the same question — what am I working on. They are one control now, `Crop · Local │ All · Light · Colour`, which is the shape Lightroom Mobile's bottom strip has for the same reason. The two halves are different kinds of state and are drawn differently: a mode is a chip that fills with the accent when it is on, a group is a word with a rule under it. That difference is what lets both be read at once, which they routinely are — picking Light while a mask is selected filters *that layer's* chain and does not leave the mode. Dropping the scope on a group press would be the same fault coming back from the other end, and would make Light mean two things depending on where it was pressed. The strip stays pinned above the develop column rather than moving to the top of the canvas as the document proposed. The half that filters the column belongs to the column, and the photograph is the subject. The canvas keeps one button, which now names the mode it leaves rather than saying "Done" — that was unambiguous with one mode and would not be with two — because the column can be closed on a narrow window and no mode may be inescapable. Entering a mode is a side effect, so Rust owns it rather than the strip writing the property: crop drops the zoom, local turns the overlay on, and leaving clears the selection. That last one is the fix. The "Overlay" and "Select" toggles are gone because they armed things that are simply what the mode *is* — a mode that has to be switched on separately is one you can enter and have do nothing. Escape and the Android back gesture join `back_step` as one `LeaveMode` rather than a second exit concept, and the mode is left before the zoom is: it was entered later, and it is the bigger step back. The heading is where the scope goes. Not a caption beside the panel, the heading *of* the panel that changed — `ADJUST` becomes the layer's name, the same string the selected row in the stack shows. That is the difference between describing a hazard and removing it. **Handles on the photograph.** A linear or radial mask could be created and then not moved, so a radial sat at the centre of the frame at its default size for ever. Three faults stood in the way of drawing one. The first is that a gradient did not render at all until the model had run. The rasteriser was built on the way out of `segment` and the array's size was read *off* the segmentation, so a gradient added to an unsegmented photograph produced nothing — silently, in the same way exports and thumbnails once did: the shader still emits the layer's block and the empty placeholder multiplies it by zero. The proxy size is a property of the photograph. Both are derived from it now, and deliberately at the same size rather than by coincidence, because a subject's distance field is sampled against that array. The second is hit-testing. A handle is drawn in output coordinates and stored in source ones, and between them lie the crop, the zoom, the pan, the straightening and the turns. `Framing::source_at` is `wgsl_prologue` evaluated on the CPU, kept in that file beside it so that keeping the two in step is one file's problem — a handle mapped through anything less drifts off the mask the moment the view moves, which is exactly what masks are rasterised in source space to avoid. The third is that a drag is a displacement, not a destination. Each handle answers to the movement of the pointer since the press, applied to where the mask was when the press landed. Snapping the handle to the pointer instead jerks it by up to half a touch target on the first press, and the target is finger-sized because a tablet has no hover to reveal a control and no modifier to qualify it. A ramp gets three handles — centre, width, angle. An ellipse gets three too: centre and one per semi-axis, the major one carrying the direction as well as the length, because where an axis is put says both. It had a fourth, and it is gone: standing off the shape by a fixed distance, the rotation arm began outside the photograph at the size a new radial is created at, so the first thing anyone saw was a control they could not reach without first shrinking the mask. Two faults here were found by looking at the screen rather than at the source, both of the kind that cannot be found any other way. A `1px` rule with a size and no position is *centred* by Slint, so the seam between the photograph and the column was a hairline down the middle of the panel, through the histogram and every slider under it — twice, once in `app.slint` and once in `AdjustPanel`. And handing Slint a fresh model for the handles on every pointer event made the repeater rebuild its items, taking the `TouchArea` holding the gesture with them: the handle jumped once and then went dead under a finger that was still down. `develop.rs` carries the same warning about the parameter rows, where it broke slider drags; the model is rewritten in place now. The tests worth having are the ones about ambiguity and about the map. That the same row reads the frame's value, then the layer's, then the frame's again is §1.1 in one assertion. That dragging a handle onto another gradient's matching handle *produces* that gradient closes the loop between the two directions of the framing map, through a view that is cropped, zoomed, panned, straightened and quarter-turned at once — a one-legged map is invisible when the framing is neutral, because then both legs are the identity. Not done here: the histogram still reports the whole frame while the sliders edit a layer. That disagreement is real and is N3's, which this unblocks. The strip has room for a Brush entry beside Crop and Local when the painted masks land in the core, and it needs nothing here but the canvas interaction. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-22 13:20:41 +02:00
dtourolle	acd694c2cf	No phone, so stop designing for one ... Targets are a 12-inch tablet and a desktop (D15). That removes most of the navigation question rather than answering it. `EXPANDED_MIN_WIDTH` is 820 logical pixels and a 12-inch tablet is ~1024 across in portrait, so both orientations of both targets are the expanded class. The compact class now fires only when a desktop window is dragged narrow — graceful degradation, not a second interface. The bottom tool strip and the one-tool-at-a-time sheet were solving a phone, and there is no phone. What survives is input, not size, and the architecture had already decided it: `WidgetDemand::precise_pointing` exists for a television remote, and its own documentation says touch is fine because hit regions grow to the modality. Touch changes hit regions, not layout. The rules that fall out are worth stating because they are easy to violate by accident — no hover-only affordance and no modifier key may be the sole route to anything, since a tablet has neither. Local masking already lost its shift-click extend for exactly this reason. The guaranteed-wide viewport also pays for a better answer to the extent problem than hiding things. The complaint was never that the column is long; it is that the histogram scrolls away from the sliders it reports on. Collapsing shortens the scroll, pinning removes the problem, and ~260px of fixed height is affordable on a viewport that is never under 820 wide.	2026-08-22 09:55:09 +02:00
dtourolle	85dafd78b7	Work out where things go, now that there are many of them ... Local adjustments took the develop column from four panels to six, and the operation set is meant to keep growing — FR-DEV-3 still lists texture, clarity, sharpening and noise reduction as v1. But the count is the lesser problem. The real one is that local adjustments introduced a *mode* without introducing a way to see it. Selecting a mask silently re-points thirty sliders at that layer, and the histogram those sliders are judged against goes on reporting the whole frame. I built that, and it is the fault that loses work rather than merely slowing someone down. Decided: local becomes a mode, in the sense `crop-mode` already is. The app has the pattern, the user knows it, and it removes the ambiguity by construction instead of describing it in a caption. It also inherits the Escape/back stack that already leaves the innermost state first. Recommended: diverge on **width**, not on platform. A tablet in landscape wants what a desktop wants and a narrow desktop window wants what a phone wants, so `cfg(target_os)` would give one physical situation two answers. `apply_layout_class` already classifies on width and already remembers a per-class override; this is a second consumer of a decision the app makes anyway. What must not diverge is the controls — both layouts consume the same generated capability model, so a new operation still needs no UI edit. Left open, because it is taste: whether the wide layout eventually gains tool tabs. Recorded rather than left to be rediscovered is the *legitimate* route to them — a descriptor declaring an operation's nature, the same shape as `Affects`, with the frontend free to render it as a tab or ignore it. Deferred because ten operations do not need eight tabs and the field is easy to add later and awkward to remove. Surveys what Lightroom, Capture One, darktable and the phone editors actually do, including the thing none of them do: make a mask a panel that rewires a different panel.	2026-08-22 09:52:08 +02:00
dtourolle	12d320cf33	Record what the spec got wrong about the model that exists ... docs/segmentation.md §4 priced arm B as costing a C dependency under the NDK and treated that as most of the difference between the arms. It is not a cost that has to be paid: `ort`'s `alternative-backend` disables its linking entirely and `ort-tract` supplies the API from tract, which is pure Rust. D13's "largest exception the policy would tolerate" turns out not to be needed, and the answer generalises to the face pipeline — so D13's runtime half is now answered and only its licensing half is open. Three findings contradict §4 outright and are recorded as F4-F6 rather than quietly designed around. There is no ADE20K-trained YOLO, so the shipped vocabulary selects subjects and not stuff — "select the sky" comes from the watershed or from nowhere. It is instance segmentation, so it partitions nothing and two people come back as two instances. And tract cannot parse a dynamic-shape export, which fixes the input at 640 square and makes tiling the only route to more semantic resolution. Arm C ships, but §8's criteria are not what decided it, and saying so matters more than claiming the process worked. §8 asked for a two- interaction margin over arm A on a traced corpus. That comparison was never run: F4 and F5 changed what the arms are, and a model that recognises subjects but has no word for sky cannot be a selection tool alone, while a watershed cannot tell a person from the wall behind them. They stopped being candidates and became complements. What is *not* done is written down as plainly: the 24-image corpus is untraced, so M1-M4 have no numbers and "this feels right" has not become one. M5 is answered on one device only, and region ids now reach the sidecar — so a cross-vendor divergence would mean a mask written on the desktop meaning something else on Android. F3 stands.	2026-08-22 08:39:17 +02:00
dtourolleandClaude Opus 5	02ae92ba0d	Tidy what the seven-branch merge left behind ... Three lints, all from merged work rather than from any one branch: `terrace` and `disc` were steps on the way to the ramp the plateau test now uses, and the reasoning that discarded them lives in docs/segmentation.md §12 rather than needing the code; two mechanical clippy suggestions in segment and cache. 1176 tests pass, clippy and fmt clean, traceability regenerated. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 12:36:15 +02:00
dtourolle	76bb6b2847	Merge branch 'worktree-watershed-plateaux'	2026-08-17 12:25:41 +02:00
dtourolleandClaude Opus 5	0b20436445	Prove the plateau pass does nothing, and stop paying for it ... Picks up the lower-completion work a crashed session left mid-debug, with one failing test and no diagnosis. The diagnosis is that the pass is a no-op. Not "does not reduce basin count" — it changes *no pixel's basin at all*, zero of 9216, comparing one plateau iteration against sixty-four. That assertion is the substance of this commit: the original test asserted a consequence (fewer basins) which a working pass need not produce, so it could have been satisfied by weakening it. A no-op check cannot pass vacuously, and it is what turned an opinion into a fact. Three candidate causes were tried and none was it. Exact float equality is genuinely wrong and is fixed regardless — a gradient computed from 8-bit samples is never exactly equal across a region the eye calls flat, so `==` never fires and `<` fires everywhere; `LEVEL_EPS` now sits behind all three comparisons. The test image is not it either: a flat disc, a terraced disc and a constant-slope ramp all behave the same. The finding worth keeping is about the domain rather than the code. On a gradient-magnitude watershed every flat region of the picture is at gradient zero, the global minimum, and a plateau with no descending exit is a minimum — one basin already, nothing to resolve. The plateaux lower-completion is defined for are regions of constant non-zero gradient, which are rarer in a photograph than F1's phrasing implies. That may be the whole answer, or it may be hiding a fourth cause; I could not close it. So `plateau_iterations` defaults to 0. The implementation stays, correct as far as it goes and costing nothing until someone finishes it; the test stays, ignored with its reason; docs/segmentation.md §12 records what was ruled out so the next attempt starts further along than this one did. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 12:25:28 +02:00
dtourolleandClaude Opus 5	a8b28136a6	Merge the batch export, and settle the seven-branch merge ... Resolves the last of the parallel work. Two conflicts worth recording, because both were semantic rather than textual: `render_for_export` gained a colour space on master while the batch branch was rewriting the single-image export path around it. Kept both: the batch request supersedes the synchronous path, and the space still has to be chosen at render time because the conversion happens in the shader before the clip to 0..1. `render_open_frame` takes it as an argument rather than reaching for a controller it does not hold. The map-wait moved into `readback::await_mapping` on one branch while another was editing the constant it used, so `READBACK_POLL_LIMIT` survived the merge with no callers. Removed rather than left for clippy to find later. 1164 tests pass, clippy clean, fmt clean. Traceability 53.0% -> 54.3%. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 10:11:44 +02:00
dtourolleandClaude Opus 5	4b36ca66aa	Render an export into the colour space its file will claim ... The colour-managed export branch left one call site deliberately unfixed, and this is it. `render_for_export` composed with the default sRGB shader, so a Display P3 export failed with an accurate error rather than producing a mislabelled file — the right way to leave a half-finished path, and no way to leave it. The space is chosen at render time because that is the only time it can be: the conversion happens in the shader, before the clip to 0..1, so by the time pixels reach an encoder they are in exactly one space and the only honest thing left is to label them. `Frame::in_space` carries which, and a mismatch between what was rendered and what was asked for stays a typed error. Also regenerates the traceability matrix over the four merged branches. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 09:34:57 +02:00
dtourolleandClaude Opus 5	40d4e439a9	Drop the parameter the offline sidecar writer never used ... `write_one_sidecar` took an `Option<&NextcloudBackend>` it ignored. It was a leftover from the shape the write path had before online and offline separated into two functions: the offline one records to the cache and queues, and has no server to talk to by definition. A parameter that is always `None` and always unused says the opposite — that there is a case where it is `Some` — and the next reader has to check. The closure it was threaded through is renamed to say what it does rather than how it is called. `run(None)` needed the reader to know what `None` meant; `queue_all()` is the sentence. Also regenerates the traceability matrix, which now records FR-CAT-9's queue. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 07:17:31 +02:00
dtourolleandClaude Opus 5	cb1d2be240	Choose the export folder by walking the server, not by typing it ... The destination for a Nextcloud export was a text field. Nobody recalls the exact spelling of a path three levels down, and getting it wrong does not fail — `create_dir` makes whatever was typed, so a misremembered folder becomes a new one at the root and the exports are somewhere nobody looks. So it is picked the way the library root is picked, using the same `FolderBrowser` model the launch screen drives: up, into, and "use this folder", confirming the folder currently *shown* rather than one selected in the list. Same rule in both places, so the phrase means one thing. The model is shared; the worker is not. `settings_ui::spawn_folder_list` is a near-twin of the launch screen's, because that one reaches into the `LaunchController` for its session and reports onto the launch screen's error line, while this one is handed credentials and writes to the settings page. Factoring them together needs a function taking both controllers or a trait implemented twice to abstract two call sites — more machinery than the twenty lines it saves. What matters is shared already: navigation behaves identically because both drive the same model. The callbacks are wired in `lib.rs` rather than in `settings_ui::wire`, because listing a remote folder needs credentials and the settings page holds no session on purpose — it is reachable before a library is opened and must not depend on one existing. With no account the picker says to sign in first, rather than showing an empty list that reads as a server with no folders. Details that are decisions rather than accidents: the picker opens at the library root rather than at whatever half-typed path is in the field, which would list nothing and look broken. The listing area is a fixed 180px, since a folder with sixty children would otherwise push the rest of the settings page off the bottom. "Up" is disabled at the root rather than hidden, so the row does not jump as the user navigates. A failed listing leaves the picker open on the folder it was showing — where the user had got to is not something to discard over a dropped request. And the chosen folder saves immediately like every other setting on a page that has no Save button. The poll timer lives on the controller for the reason `LaunchController` keeps its own there: a `slint::Timer` stops when dropped, so one local to the function that starts it would be collected before the listing arrived. Carries in-flight work from a parallel session — a segmentation pass in dr-gpu, a sidecar cache, and the develop panel's continuing changes. 1020 tests pass, fmt clean. One clippy warning remains and is not mine: `sidecar_cache::dir` is unused while that work is in progress. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-17 07:12:01 +02:00
dtourolleandClaude Opus 5	e00c99b864	Let a photograph leave: an export button, and a cache to leave from ... dr-export could turn a frame into bytes and nothing could ask it to. This is the button, and the place the bytes go. **Everything is staged first.** An export bound for the server is written to a local outbox and uploaded afterwards; offline is not a special case, it is the same path with a drain that finds the server absent. Doing it the other way — upload directly, stage only on failure — makes the failure path the one that is rarely exercised and always broken, and a network drop mid-batch leaves some exports existing and some not with nothing recording which. Staged first, an export is finished the moment it is written and the upload is a promise kept later. The outbox sits beside the catalog rather than under the cache. dr_catalog's cache already draws that line: passive entries are a convenience and go under LRU, pinned ones are a promise and never do. An export awaiting upload is a promise — the user was told it succeeded — and sweeping it for disk would destroy the only copy. Bytes are written before the destination record, so a kill between the two leaves an orphan the drain ignores rather than a record pointing at nothing. The status line says "Queued for Exports/2026", never "Exported to Nextcloud", until it has actually landed. There is a test asserting that wording, because the tempting shorter sentence is a claim the app cannot keep. The drain runs on the sync pass, before the shards: a thumbnail shard can be rebuilt from the originals and the catalog is an index, but a queued export exists nowhere else. `DevelopSession::render_for_export` renders the framed size rather than reusing the frame on screen, which is deliberately viewport-sized (FR-DSP-1) — encoding that would hand the user a soft, screen-sized file with nothing to say anything had been lost (FR-EXP-9). One compromise, recorded rather than hidden: the export runs synchronously on the UI thread, so the window is unresponsive for the few hundred milliseconds a full-resolution render and encode takes. Moving a DevelopSession and its GPU pass to a worker is a larger change than one button earns, and it is batch export that makes the wait intolerable rather than merely noticeable. Still missing: the Nextcloud folder *picker*. The destination is typed into Settings for now. `FolderBrowser` in launch.rs is already the reusable model for it — it browses a remote tree and nothing about it is specific to choosing a library root — but wiring it into the settings page needs a listing worker and browser UI there, which is its own piece of work. Carries in-flight work from a parallel session — presets, the develop copy and paste, and the node schema's `presentation` and `enum` support. One misplaced callback in settings_ui.rs is moved from `render` to `wire`: registered in `render` it borrowed a `&SettingsController` into a 'static closure and would not compile, and that file's own docs say render pushes properties while wire connects callbacks. 992 tests pass, clippy and fmt clean. Traceability 48.3% -> 51.0%. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 23:58:17 +02:00
dtourolleandClaude Opus 5	151dcc3c02	Make a file out of a photograph ... Export existed as a settings page and nothing else: format, quality, colour space, five sizing modes, a filename template and a metadata switch, all configurable in detail, and no way to produce a single file. dr-export is the other half. **It returns bytes and a name, and writes nothing.** An export has three destinations with nothing in common — a path on Linux, a SAF document on Android where there is no path at all (ARCH §6.9), and a PUT to a Nextcloud folder — so a crate that opened the file itself would serve one of them and be rewritten for the other two. The caller places the bytes. Resize, then sharpen, then encode, in that order and for a reason: output sharpening compensates for the softening the resample introduced, so its strength scales with how much scaling actually happened, and sharpening before shrinking would throw the result away. Lanczos-3, separable, with weights computed once per output row — FR-EXP-4 asks for Lanczos or better because a box filter turns a distant fence into moiré. Collision handling takes the "is this name taken" test as a closure rather than looking at a directory, because there is no directory it could look at that works everywhere. That shape is not politeness toward Linux: Android's createDocument renames on collision by itself and cannot overwrite at all, so all three CollisionPolicy settings need the answer *before* anything is created. Overwrite, Skip and Increment are each tested, and Increment gives up after ten thousand rather than spinning against a destination that reports everything as taken. Three things are honest rather than done: - **Colour space.** sRGB only. The shader encodes and clips to sRGB before this crate sees a pixel, so tagging a file Display P3 would claim a gamut it does not contain. Refused with a typed error instead of mislabelled; honouring it is a pipeline change (FR-EXP-2). - **AVIF and JPEG XL.** No encoder. libaom and libjxl are C, ravif is slow enough to change what a batch feels like, and the settings page offers both because FR-EXP-1 lists them — so asking for one says so rather than writing a JPEG under a .avif name. - **16-bit TIFF** is a real 16-bit file carrying eight bits of information, because AdjustPass renders to Rgba8Unorm. Widened by *257, not <<8, so white lands on 65535 rather than a quarter-percent grey. Making it mean what it says needs the composer told what format to write. Metadata is not written at all, which satisfies the half of FR-EXP-8 that matters most: strip_location defaults to on, and a file with no EXIF block has no GPS tag. Retaining camera and copyright when asked is not implemented and cannot be faked by omission. Also here: - `AdjustPass::export_pixels`, ungated where `read_output` is behind a feature. The two are the same transfer and opposites in intent: reading pixels back to *display* them is what ARCH §6.1 forbids and AC-8 asserts against, while reading them back to encode a JPEG is the only way a file has ever been made. Separate methods so the instrumentation can count one without counting the other. - `ExportTarget`, so a destination can be a folder on the server. On Android that is the only destination needing no platform work whatsoever — a PUT against create_dir, already on the RemoteBackend trait, behaving identically on both platforms. Switching target clears the destination, since a path is not a remote folder and carrying one across would offer to create a folder called `home` at the library root. Verified end to end rather than by unit test alone: `cargo run -p dr-export --example export` decodes a frame, runs the develop chain on the GPU at full resolution, reads it back, and writes all five formats — 27 ms for a full-size JPEG, 165 ms with a Lanczos reduction to 1200px. ImageMagick agrees the 16-bit TIFF is 16-bit. dr-export cross-compiles clean for aarch64-linux-android; all three encoders are pure Rust, which is why they were chosen. 944 tests pass, clippy and fmt clean. Not yet wired to a button. The develop view has no export action, so nothing in the running app can reach any of this yet. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 22:26:37 +02:00
dtourolleandClaude Opus 5	d7aeafaf84	Move to wgpu 29, the version Slint can share a device with ... Groundwork for spike S1. Importing a texture into a Slint scene requires it to come from the *same* `wgpu::Device` Slint renders with, and Slint hands out a device of the version it was compiled against. Slint 1.17 offers `unstable-wgpu-28` and `unstable-wgpu-29` and nothing older, so wgpu 23 could never have met it: two semver-incompatible wgpu crates in one tree are two distinct types, and the device would not typecheck across the gap. The version is therefore not a free choice, and the manifest now says so — Slint and wgpu move together or not at all. The Slint requirement is also corrected from "1.9" to the 1.17 it has actually been resolving to. Nothing about the render path changes here. The readback bridge is still in place and still the display path, so this is verified by the tests that already existed rather than by anything new: 39 dr-gpu tests, which compare real pixels off a real device, and 888 across the workspace, all passing. Zero-copy lands separately and small. What the six releases cost, in full: - `ImageCopyTexture`/`ImageCopyBuffer`/`ImageDataLayout` became the `TexelCopy*` names (24). - `Instance::new` takes the descriptor by value, and `InstanceDescriptor` lost its `Default` — it carries a boxed display handle now, so a headless context says `new_without_display_handle` and means it. - `request_adapter` returns `Result` rather than `Option` (24). - `DeviceDescriptor` absorbed the API trace from `request_device`'s second argument and gained `experimental_features` (25). - `PipelineLayoutDescriptor` takes `Option<&BindGroupLayout>` per slot, and `push_constant_ranges` became `immediate_size`. - `Maintain` became `PollType`, and `poll` is fallible. Two of those are improvements worth having rather than churn. The error scope is a guard whose `pop` runs on drop, so an early return from the pipeline compiler no longer leaves a scope open on the device for whatever ran next to fall into. And a fallible `poll` reports a lost device (NFR-R7) at the point it happens, where before the map callback simply never arrived and the failure surfaced later as a readback that spun out its poll limit. Still to do for S1: dr-ui renders through `renderer-femtovg`, which is OpenGL. Texture import needs Slint itself rendering on wgpu. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 21:34:04 +02:00
dtourolleandClaude Opus 5	3b0950c39b	Regenerate the matrix that dr-thumbs moved out from under ... Commit 9a51cc8 edited core/dr-thumbs/src/lib.rs and pushed its TRACES tag from line 341 to 376 without rerunning the extractor, so the two rows that cite it — FR-CAT-15 and NFR-RES-4 — kept pointing at a line that is now something else. Nothing else in the report changed. The matrix records line numbers, so any edit above a tag dates it; the CI step exists precisely because that staleness is invisible in review. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 21:19:51 +02:00
dtourolleandClaude Opus 5	9a51cc88d6	Give a shard's remote name the client that wrote it ... Shard ids are per store: every client fills its own numbering from 0, so "shard 3" names different thumbnails on every device. The derived sync published them into a flat shard-NNNN.sqlite namespace anyway, which left two clients writing one name. Both failures that follow were live. On upload, a client's open shard overwrote a peer's file of the same id — content the peer still believed was published and would never restore, because its own copy was sealed and the name existed. On download, the loop skipped any remote id it already held locally, which is the only safe reading of a name that says nothing about who wrote it, so a client holding shards 0..5 never fetched the peer's 0..5 at all. Between them, two populated clients exchanged almost nothing: only shards numbered above the other's highest. A fresh device worked, having no local shards to collide with, which is why this went unnoticed — it is exactly the case the feature was written for. The name is now shard-<client>-NNNN.sqlite. The client id is minted per store in index.sqlite, beside the numbering it qualifies rather than in settings: a store deleted and rebuilt restarts at shard 0 and must not claim the remote names its predecessor wrote. Since our own ids now say nothing about what we have taken from others, index.sqlite also keeps a ledger of adopted remote names and the size each had when merged. A size rather than a flag, because a peer's sealed shard never returns but its open one grows, and re-merging the grown copy is how the thumbnails it gained since arrive. Flat names already on servers still parse, reporting no owner, so each client adopts them once, and nothing is written under that form again. One whose id and byte size match a local shard is that client's own earlier upload by the same identity argument the upload path already makes for sealed shards, so the rename does not cost every client a re-download of its whole store. Older builds ignore the new names and stop receiving shards until updated; their own uploads are still adopted, so nothing is lost. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 21:15:12 +02:00
dtourolleandClaude Opus 5	7c57f490fe	Declare a develop operation in YAML, and generate the rest ... An operation was, in the overwhelming majority of cases, four facts: what its parameters are, what uniforms they compute, what WGSL those uniforms drive, and where it sits in the chain. Written in Rust those four facts arrived wrapped in ninety lines of trait implementation — a match on parameter id to a struct field, another match back, an is_active comparing each field to its default, a Vec<Uniform> built by hand. All mechanical, and each one a place to make a silent mistake: a param() arm returning the wrong field reads perfectly and breaks the sidecar round-trip. So the four facts are the file now. core/dr-pipeline/ops/<id>.yaml is a node, build.rs compiles it into the same Operation impl as before, and the result lands in OUT_DIR — the same reasoning as style.yaml -> theme.slint, including why it does not land beside the sources it would look exactly like. Nothing downstream can tell a declared node from a hand-written one: same &'static OpDescriptor, same fused-shader composition, same sidecar. Nine nodes moved: exposure, white_balance, contrast, highlights_shadows, blacks_whites, brilliance, vibrance, saturation, and the shared WGSL helper registry. Their prose came with them, and so did their tests — set/expect/expect_active/expect_wgsl in the declaration compile to real #[test]s, so a node file carries its own proof rather than leaving it behind in a file that no longer exists. Two stayed in Rust and say so with `rust:`. The tone curve's neutral is a relationship between five interpolated points rather than a set of values; the colour mixer generates thirty-six faceted parameters from twelve computed hue bands. A schema stretched to cover either would be a worse language than Rust aimed at one caller. They still declare their position here, because the chain's *order* is the one thing a reader comes to this directory to learn, and an order written half in YAML and half in Rust would be worse than either alone. default_chain() is generated from it. Uniforms are derived by a small expression language — exp2(exposure), blacks / 100 * 0.02 — compiled to Rust rather than interpreted, so an unknown name or a wrong arity is a build error naming the file and the key and the arithmetic costs nothing at runtime. The build script refuses a duplicate order, a filename disagreeing with its id, a default outside its own range, a test value the graph would clamp before the node saw it, a helper that does not define the function it names, and a declared node colliding with a file in src/ops. Verified by adding a scratch node and removing it again: one file, no other edit, and it joined the chain at its declared order with its test running. 237 tests pass in dr-pipeline, clippy and fmt clean. .yaml joins the traceability tool's scanned suffixes, because a node's Rust now lives in OUT_DIR where a tag could never be linked from the report. Coverage 47.7% -> 48.3%. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 21:08:16 +02:00
dtourolleandClaude Opus 5	65e6a96a65	Say what the application is doing, in one bar and one list ... Every background job reported into a window property of its own — library-thumbs-done, library-pin-total, library-syncing — which only the grid ever read. A pin download that outlived the view it was started from drew nothing at all once the user opened an image, and there was no answer anywhere to "what is this busy with", because the answer was spread across eight properties nothing collected. They report to one register now (ui/dr-ui/src/activity.rs). It publishes an aggregate, which draws a three-pixel bar across the top of the shell in every view, and a row per job, which the settings page lists: scans, thumbnail batches, pin and open downloads, sidecar uploads, the sync and the trash. Failures stay on the list until they are cleared; routine successes do not, or a scroll would bury them. The handle removes a still-running job when it drops, so a worker that dies mid-transfer takes its row with it rather than leaving the bar sweeping for the rest of the session. Also carries in-flight work from a parallel session — the drawn icon set and the dr-pipeline ops split. dr-pipeline's build script does not compile at this commit; ui/dr-ui does, with clippy clean and its tests passing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 18:32:09 +02:00