6 Commits

Include renames

Author	SHA1	Message	Date
dtourolle	7421837c8a	Let an operation say what it is about, so the panel can group without naming ... Tool tabs need a taxonomy, and the taxonomy was the problem: a table in `ui/` mapping operation to tab breaks FR-DEV-3a, and a `group:` field risks what `ui-refinement.md` condemned `starts-group` for — the core deciding where the panel draws things. `Attribute` threads the needle. It says what an operation *is* — tone, colour, detail, optics, geometry, effect — which is the same category as `ParamKind` and squarely on the core's side of ARCH §4.3a's line. What is drawn, where it sits and whether it is visible stay the frontend's. There is no attribute for "the third tab", the enum's order is declaration order rather than screen order, and a frontend may render these as tabs, as headings, or ignore them. The payoff is that a tab strip can be *derived*: the groups are the attributes present in the capability list, so the interface names no operation and needs no table to keep in step. An operation joins the right group by declaring what it is, which is the one thing its author is well placed to say. Plural, because the tone curve is genuinely both — an RGB curve is tonal and the per-channel curves are chromatic, and filing it under one would hide it from half the people looking for it. Required and non-empty, enforced in `build.rs`, and the failure was checked by removing the line rather than assumed. An operation with no attribute is invisible to a panel that groups by them; a build that stops costs ten seconds, a control nobody can find costs more. The vocabulary is closed for the same reason: a typo would otherwise invent a category holding exactly one operation, which looks like a deliberate one until somebody counts. Six tests over the real chain, including the hand-written operations that `build.rs` never sees and so cannot check.	2026-08-22 10:10:00 +02:00
dtourolleandClaude Opus 5	0a331c717e	Give the controls a vocabulary, and let a node ask for one ... widgets.slint set the rule — screens consume components, and a bare `Theme.*` at a call site means a component is missing — and it set it for chrome only. The controls never got the same treatment, so they were written wherever they were first needed and copied from there. **The slider was private to the develop panel.** `SliderTrack`, with the fifty-line preamble explaining how it wrests a drag away from a Flickable, lived inside adjust.slint and no other screen could reach it. It shows: export quality is a 1-to-100 value, and the settings page offered a free-text box for it, with the range written in a hint and enforced nowhere. `to-float()` answers 0 for anything it cannot parse, so a typo saved a quality of 0 and the page displayed the 0 back as though it had been asked for. The tick-box was written twice, in launch.slint and settings.slint, from the same 18px box and the same handler; the second carried a comment deferring the lift until a third caller appeared. The label-and-hint header was written three times inside settings.slint alone. controls.slint is the input layer beside widgets.slint's chrome layer, and the constraint that makes it reusable is that **nothing in it knows about `ParamRow`** — that struct is the develop panel's flattening of the capability model, and a control that imported it could only ever be used by the develop panel. The primitives take plain numbers; the ParamRow-shaped wrappers stay in the panel that owns the model. 658 lines came out of the three screens. `SliderRow` is the slider-plus-number-box ARCH §4.3 names as the pointer presentation of a bounded scalar, and quality is its first adopter. It commits on gesture end rather than on every movement, because the settings page saves to disk on change and a two-second drag is a couple of hundred writes where a text field committed once. The develop panel keeps the live stream — that is what its pipeline is for — so `SliderTrack` now reports both. **The other half is the descriptor.** FR-DEV-3a and ARCH §4.3a already specify more than was built: an ordered preference list of widgets rather than one, the demands a widget makes, and kinds beyond scalar and bool. - `Presentation.widgets` is now a list, walked by `choose`, falling back to plain sliders. Falling off the end is not an error, and there is a test asserting an operation asking only for an unimplemented widget still yields one control per parameter. - `WidgetDemand` carries what a widget inherently needs — two-dimensional dragging, precise pointing — and no pixels, breakpoints or platform names. - `WidgetKind` grows to the specified set. There is deliberately no `Colour` *kind*: a colour is three numbers, and a value type that is not an `f32` would reach through the graph, the uniform block and the sidecar format to buy what `ColourWheel` over three scalars already describes. Every widget here is a hint over ordinary scalars, which is what keeps the fallback honest. - `ParamKind::Enum` is the one new shape, and it fits because a variant index is exact in binary32. `kind: enum` with a `variants:` list works in `ops/*.yaml`, so a node declaring one gets a segmented control with no UI file edited — which is the promise ops/mod.rs already makes. The panel's dispatch was duplicated: a lone parameter and a grouped one each wrote out their own list of kinds, so `enum` would have had to be added twice and a kind added to one would appear or vanish depending on how many parameters its operation happened to declare. `ParamControl` is now the only such chain. `rows_from` is free-standing rather than a method, which is what lets the FR-DEV-3c acceptance test requirements.md asks for actually be written: an operation the frontend has never heard of, appearing in a generated panel, with no GPU in sight. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 23:21:35 +02:00
dtourolleandClaude Opus 5	9b2ee0d0eb	Show the colour mixer as three runs of twelve, each row a colour ... The mixer was thirty-six sliders reading "Hue / Sat / Lum" twelve times over with nothing saying which band any row belonged to. The identity was there all along — the descriptor declares param.mixer.orange.sat and BANDS carries orange at 30° — and was discarded on the way out: labels.rs had no mixer entries, so every key fell through to a derived label that yields the bare channel name. A parameter can now say which aspect it adjusts and which subject it adjusts it on, with the subject's hue where the subject is a colour (descriptor::Facet). That is data about what the operation does, not a layout: the mixer genuinely weights pixels around 30°. What to draw from 30°, and in what order to stack the runs, stay in dr-ui (ARCH §4.3a) — develop.rs brings rows sharing an aspect together and marks the first of each, and adjust.slint names the run once and draws a swatch, a track and a readout on one line. Grouped by channel rather than by band because an edit is almost never "everything about orange"; it is the saturation of the greens, made by comparing one channel across neighbouring bands. Twelve band sections put those twelve rows in twelve different places. The swatch is the label, which is what makes twelve rows fit where four did. The band name is not lost: it is the row's accessible label, so the control is not colour-only, and labels.rs is where the mapping is written down — including chartreuse as "Yellow-Green" and spring as "Blue-Green", since nobody hunting foliage scans a list for "Spring". Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-16 16:14:13 +02:00
dtourolle	f630a3ff81	Wire the launch screen into the app ... The app now opens on the login screen when there is nothing else to show — no local paths and no configured library — and goes straight to the images otherwise. Making someone click past a login they already completed is pure friction. launch.slint imported by app.slint, replacing the window rather than overlaying it: there is no library to look at until an account is configured launch_ui.rs the Slint wiring, kept out of lib.rs so the launch flow can change without touching the develop window Login runs on a worker thread and posts results back through a channel, since Slint's event loop is single-threaded and a 20-minute browser wait cannot block it. The system browser is opened via xdg-open, never an embedded webview (FR-NC-1). Sign-out deletes the local credential even if server-side revocation fails: a network error must not leave a usable secret on the machine. Format tick-boxes persist on each toggle, so a selection survives a crash before the library is opened. Two things deliberately incomplete rather than faked: - "Choose folder" lists the account's folders and reports them, but there is no picker widget yet, so selection still happens via the connect example. - "Open library" logs the request. Opening a remote library needs the scan-and-cache path, which belongs with the catalog work in flight. Earlier I broke the other in-flight dr-ui work by calling slint_build::compile twice, which replaces the generated module. The correct wiring is an import inside app.slint, which is what this does. 30 dr-ui tests passing; both launch paths verified by running the app.	2026-08-09 15:34:46 +02:00
dtourolle	c8bb08e661	Add folder scan with format selection; validate A3 on a real library ... Library setup as the user described it: pick a folder, choose which RAW types to look for, scan recursively. dr-types::FormatFilter the tick-box selection, seeing through VFS placeholder suffixes so a dehydrated CR2 still matches as a CR2 dr-sync::scan recursive walk, Depth:1 per directory, pruning unchanged subtrees where the backend propagates directory ETags Verified against nextcloud.tourolle.paris (34.0.2) on a real library: browse root 32 entries, 98ms scan PhotosRaw 17,185 RAW files in 334 directories, 34.1s (7,836 CR2 + 9,349 DNG) range read 262KB of a 21.5MB DNG in 119ms — 1.22% of the file, and enough to read "Canon EOS 6D | ISO 100" That last line is assumption A3 validated on real data. Cataloguing this library by whole-file fetch would move roughly 370GB; the range path moves a few MB. Pruning is capability-gated rather than assumed: with per-entry ETags a probe costs a request and proves nothing about children, so it is skipped entirely. A test asserts zero probes in that case. Still unresolved: /core/preview returns 400 for every parameter combination tried, including on a JPEG the server reports as having a preview. Not a request-shape bug — it fails identically bare. Recorded rather than worked around; ARCH §6.7 already treats server previews as opportunistic, so nothing depends on it.	2026-08-09 12:22:31 +02:00
dtourolleandClaude Opus 5	78e3e6b846	Add the develop pipeline: demosaic and seven raw adjustments ... Decode through display, on the GPU: black/white normalisation, Bayer demosaic, camera colour transform, and the first seven adjustment operations — white balance, exposure, highlights/shadows, blacks/whites, brilliance, vibrance, saturation. Composable shaders. Each operation contributes a WGSL fragment rather than owning a pass, and dr-pipeline fuses the *active* ones into a single compute shader. One texture read and one write per frame regardless of how many adjustments are in play, while the operations stay independent in Rust — adding one is a new file, with no central shader to edit. An operation at neutral settings contributes no code, no uniform and no branch. Uniforms are prefixed per operation so two may both declare `amount`; helpers dedupe by name from a single source of truth. Pipelines cache on a structure hash covering the op-set and its order but not the values, so dragging a slider uploads uniforms and reuses the compiled pipeline. Measured on a 24 MP CR2: 0.60 ms re-render, one pipeline compiled across ten slider positions. The UI is generated, not written. EditGraph::capabilities() reports parameters with their kinds, ranges, defaults and current values; the panel builds one control per entry chosen by ParamKind. No file in ui/ names an operation, and dr-pipeline has no wgpu dependency, so codegen is testable without a device (ARCH §6.5a). Three defects found against real files, each silent: - rawler 0.7.2's `xyz_to_cam` is all zeros — deprecated and no longer populated. The live matrices are in `color_matrix`, keyed by illuminant. Reading the old field yields no colour transform at all. - `cam_to_xyz_normalized()` returns all NaN on any Bayer sensor: it divides each of four rows by its own sum, and the unused fourth (emerald) row sums to zero. Inverting the 3x3 ourselves avoids it. `wb_coeffs[3]` is NaN for the same reason and is normalised at decode. - As-shot white balance reached the uniform block but no shader read it, so the first render of a real CR2 came out violently green. Green photosites collect roughly twice the signal of red and blue. Now applied unconditionally before any operation, with tests on ordering. Demosaic is Malvar-He-Cutler rather than bilinear: gradient-corrected interpolation at one 5x5 neighbourhood per pixel, where bilinear leaves visible zippering on any high-contrast edge at 1:1. Two of the four packed CFA constants were wrong on the first attempt, so all four layouts are asserted to reconstruct the same colour. Crop origins at odd coordinates re-phase the pattern; without that, red and blue swap. X-Trans reports GpuError::UnsupportedCfa rather than approximating with the Bayer path, which would look like a corrupt file. 206 tests, including GPU tests proving every operation and the full seven-operation chain generate compilable WGSL. Known gaps: the display path still reads back to the CPU each frame, which ARCH §6.1 forbids and AC-8 asserts against — it is gated behind the `readback` feature and waits on spike S1 wiring Slint's texture import. Curve shapes are a first draft and want tuning against real photographs. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-09 11:37:58 +02:00