`texture_contributes_nothing_where_its_scale_does_not_exist` asserted that the
detail chain composed *nothing* when texture's kernel rounded away, and its
comment recorded that empty chain as a gap: the fused pass had already decided
to hand on linear working values, so an empty chain left the output transform
undone and the render was rejected. It said fixing it meant composing both
halves together, at the composition boundary rather than in that file.
Noise reduction closed it there in the same round, by emitting a bodyless
`detail/resolve` pass for exactly this case. So the assertion was describing a
defect that no longer exists, and failing because the defect was fixed.
Now asserts the property it was always about — texture contributes no kernel,
`radius() == 0` — while the chain carries the one pass that finishes the
render. Two agents working in parallel each saw one half of this; it is only
visible with both merged.
Sharpening, noise reduction and clarity were written in parallel and each
rewrote the same two tests, which had counted one fused block per operation —
true only while every operation was a point function.
Kept the exclusive-or formulation: each operation must reach exactly one of
the two stages. A count cannot tell "moved to the detail stage" from
"vanished from both", and that ambiguity is what broke these tests three
times over.
The merge left two fragments of the versions it replaced — a loop over a set
that no longer exists, and the tail of an assertion whose head was gone.
The loop is not restored: `point ^ neighbourhood` already asserts per
operation what it checked over the set. The assertion is, because it catches
a different fault from the exclusive-or — a block in the shader that nothing
in the chain asked for, rather than an operation in the wrong stage.
Capture sharpening and noise reduction were written in parallel and both
claimed `order: 110`; the codegen refuses that, which is the guard working —
two nodes at one order is an ambiguous pipeline and operation order changes
the result.
Resolved in noise reduction's favour, for the reason its own `placement:`
block already gives: denoising is a repair and everything else in this stage
is an enhancement. Sharpening or adding clarity to a noisy frame amplifies the
grain along with the detail, and no later pass can separate them again. So the
detail stage now runs noise reduction, capture sharpening, clarity, texture,
and the other three shift up a slot to keep the multiple-of-ten convention the
rest of the chain uses.
Noise reduction was also missing the required `attributes:` key. The order
collision aborted the build before the attribute check could report it, so it
arrived looking like one fault and was two.
A layer holds a full chain and fuses it into the colour dispatch, so the
panel - which names no operation - would have offered a noise reduction
slider inside a local adjustment. It could not have worked: the detail stage
is its own dispatch, running after the masks are already applied, with
nowhere to be handed one layer's mask. The control would have moved and done
nothing. Filter the layer's chain to the operations that can honour it.
Activating every operation now activates a kernel too, and a kernel emits no
block in the fused shader. Assert that each operation reaches exactly one of
the fused pass and the detail chain, rather than counting fused blocks
against the length of the chain.
Both tests composed only the fused half and rendered it through the plain
path. That was correct while every operation was a point operation; with a
kernel in the chain the fused pass stops short of the output transform, so
the render was rejected and the operation-block count was one too high.
Compose both halves and dispatch them together, and assert that each
operation reaches exactly one of the two stages rather than counting blocks
- so the next kernel added extends the coverage instead of breaking it.
Re-inserting a card that has already been imported produced a folder full of
`-1` copies. Both halves of the placement logic treated a taken name as a
collision to rename around, which is right for the case they were written for
— two cameras both writing IMG_0001.CR3 — and exactly wrong for the far more
common one, where the taken name is the same photograph.
Locally this cannot be answered from the catalog. On a library whose catalog
describes a *server*, a file sitting in the local destination has no row to be
found by, so the only way to know whether it has already been copied is to
look. The destination folder is listed once per folder rather than probed per
file: a card is two thousand frames landing in a handful of days.
Remotely the same question is one PROPFIND that was already being made to
resolve the name, so `upload_original` now returns `Placed::AlreadyThere`
instead of inventing a second copy of work that is already safe. The count is
reported apart from `uploaded`, because "12 already on the server" and "12
uploaded" are different answers to whether this run backed anything up — and
apart from the local duplicate count, because these files *were* copied here.
Name plus length decides it, not a digest: this runs before any transfer, and
hashing to answer it would read the whole card to avoid reading the whole card.
A camera reusing a filename after IMG_9999 writes a different number of bytes
essentially always, which leaves the rename for the case it is really for. The
digest tier still catches the same frame under a different name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
every_operation_generates_compilable_wgsl and the_whole_chain_at_once_compiles
both rendered through the fused half only. A neighbourhood operation
contributes no fused fragment, so its kernels went uncompiled — and once one
is active the fused pass hands on linear working values, which plain render
refuses. Both now compose both halves from the one graph, and the fused
block count excludes the operations the detail chain names.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A test that cannot be run cannot be checked by running it, and a number
copied out of a test run agrees with whatever the code did on the day.
Each asserted kernel width, tolerance and overshoot bound now carries the
arithmetic that produces it -- the shorter edge, the sigma, the
truncation at two sigmas, and where the rounding falls -- so a reader can
verify the expectation against the recipe without a GPU or a compiler.
Also records the two places where a bound is a bound and not a
measurement: the tolerance in the frame-fraction test is exactly what
rounding a kernel to a whole pixel costs on the smallest frame it uses,
and the halo test's floor and ceiling bracket a peak derived from the
step, the soft limit and the midtone taper rather than from a run.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The fused-fragment check in lib.rs cannot see a detail pass: it is a
separate shader composed at a resolution compose() never knows. The
kernel's own test now scans the block the composer wrapped, with comments
stripped so prose about the keyword cannot fail a test about the code.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`the_whole_chain_at_once_compiles` counted one `---- ` block per
operation in the chain. That was true while every operation was a point
operation, and stopped being true the moment a neighbourhood one existed:
clarity and texture are active in that test, and still emit no fused
block, because `compose_full` filters them out and the detail stage
dispatches them separately.
Counted now by asking each operation whether it has a detail stage --
the same question the composer's own filter asks -- rather than by
subtracting a number someone has to remember to update. Capture
sharpening and noise reduction are covered by this without another edit.
The render at the end is now `render_detailed`, which is not a
concession but the stronger test: with a neighbourhood operation active
the fused pass hands on linear working values and the last detail pass
performs the output transform, so rendering the fused half alone is the
mismatch `render_detailed` exists to reject -- and the detail passes are
generated WGSL with uniform blocks of their own, which is exactly what
"everything at once" is here to collide. It renders at 512 rather than
32 because a compositional radius is a fraction of the frame, and on a
32-pixel target every detail kernel rounds away to nothing.
Also records, in `texture_contributes_nothing_where_its_scale_does_not_exist`,
the seam this uncovered: an active detail operation whose kernel rounds
away composes an empty chain while the fused pass has already been
composed to hand on linear values, and nothing can then encode the
result. That test now asserts the property on the composed chain instead
of driving the unrenderable configuration.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A colour square wave built from equal, opposite swings of red and blue is
not a pure colour pattern: Rec. 709 weights them 0.2126 and 0.0722, so it
carries a luminance square wave of about a seventh of the swing underneath.
Correlating the raw red channel therefore reads a constant floor that the
chroma filter is not meant to remove, which compressed every ratio towards
one - enough that the resolution test could no longer tell a correct kernel
from one twice the size. Correlate the colour difference instead, and write
the derivation of each expected value into the test.
Carries the source's metadata all the way to the file the user hands over,
and proves in bytes that the coordinates do not come with it.
The privacy test was the piece that mattered and the piece that was wrong.
It searched the whole file for the two-byte hemisphere reference "N\0" or
"E\0", which is not a fingerprint of a GPS directory at all: sample 14 of the
sRGB tone curve inside the ICC profile every export embeds is 69, written as
`00 45`, and the next sample is below 256, so its high byte is `00`. Every
format would have failed a test about a colour profile. The needle is now the
twenty-four bytes a coordinate actually serialises to — three rationals, both
byte orders, since exif.rs writes little-endian and the tiff crate writes in
the host's — which cannot match by accident, and the retaining test asserts
the same needle is *present* so a search that could never find anything
cannot make the stripping test pass by being useless.
The batch exporter now hands the decoder's reading on to the encoder. It
already read the metadata for the orientation and the {date} token; passing
it through is what puts the camera, the lens and the rights statement into
the file. Nothing about privacy is decided there — dr-export takes that
decision once, from the settings.
The example passes it too, because it is the only place in the tree that
produces files a person can open in exiftool. A unit test can prove a GPS
directory is absent from a byte slice; only a real export proves a real
photograph comes out the far end still knowing which camera took it.
TRACES: FR-EXP-8
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
An active detail operation may emit no pass at a given render scale - the
honest answer for a sensor-sized radius on a heavy proxy. The fused composer
cannot see that, having no resolution to consult, so it had already stopped
short of the output transform and the frame died on a storage-format
mismatch. Compose a bodyless resolve pass in that case so the output
transform still happens exactly once.
every_operation_can_be_activated_together counted one block per operation
in the chain, which was true only while every operation was a point
function. A neighbourhood operation is a dispatch of its own and emits no
fused block, so the count now excludes the operations the detail chain
names, and each of them is separately asserted absent rather than the
comparison being loosened.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Capture sharpening as a two-pass unsharp mask in the detail stage: blur
along x, then along y, each pass applying a one-dimensional high-pass to
luminance so the composite preserves a flat field exactly and matches the
textbook kernel on any locally one-dimensional edge.
The radius is stated in source pixels and converted once per render, so a
radius tuned on a fit view is the radius the exported file gets. Below one
render pixel the operation declines to draw rather than showing sharpening
the file will not contain, and emits a single pass-through that still
carries the output transform.
The develop session now renders through render_detailed, which is what
lets an active neighbourhood operation reach the screen at all.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Checkpoint committed by the coordinator, not by the authoring agent: the
session hit its API limit mid-task and left this work uncommitted. Committed
so it survives, NOT because it is finished - expect failing tests and
half-applied changes. The agent resumes from here.
Checkpoint committed by the coordinator, not by the authoring agent: the
session hit its API limit mid-task and left this work uncommitted. Committed
so it survives, NOT because it is finished - expect failing tests and
half-applied changes. The agent resumes from here.
Checkpoint committed by the coordinator, not by the authoring agent: the
session hit its API limit mid-task and left this work uncommitted. Committed
so it survives, NOT because it is finished - expect failing tests and
half-applied changes. The agent resumes from here.
Checkpoint committed by the coordinator, not by the authoring agent: the
session hit its API limit mid-task and left this work uncommitted. Committed
so it survives, NOT because it is finished - expect failing tests and
half-applied changes. The agent resumes from here.
The declaration in ops/tone_curve.yaml has claimed per-channel curves since
it was written — it is the justification for the operation carrying both
`tone` and `colour`. Only the master curve existed. This is the other three.
The master runs first and the channels grade its result. Both orders are
real images and they differ visibly, so the choice is made and written down
rather than left to the loop: a point placed on the blue curve should act on
the tone the photographer can see, which is what the master has already
produced. The other order anchors the grade to tones the master is about to
move, so adjusting contrast slides a warm shadow up into the midtones.
Every id that existed before today is spelled exactly as it was. The master
curve keeps `p2_y` and the new curves take `r_`, `g_` and `b_` prefixes, so
a sidecar written when there was one curve loads, means what it meant, and
renders the same shader — asserted on the generated source, not on the
parameter values. Nothing needed a version check because nothing was
renamed.
Each curve reaches the shader only when it has been moved off the diagonal,
so an S-curve and no colour work generates what it generated when this
operation held ten parameters instead of forty, down to the uniform names.
The monotonicity guarantee is enforced per curve: a coincident pair on blue
divides by zero exactly as thoroughly as one on the master.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Keywords are catalog state, and the catalog syncs. Without this, two devices
keywording the same library would resolve to whichever synced last, and an
afternoon of work would vanish with no sign it had ever happened.
The vocabulary merges per row on the rule collections already use: revision
first, timestamp only to break a tie, so a device with a skewed clock cannot win
by having the wrong idea of the time. Assignments merge as a set union, which is
FR-NC-9's principle applied to metadata instead of edit nodes — disjoint work
survives on both sides.
Three things needed care and are commented where they happen:
A deletion travels *by name*, not by identity. Both devices may have minted
their own uuid for one word before they ever synced, so deleting by uuid would
tombstone a row nothing was assigned to and leave every photograph still
carrying the word. The union then refuses to readmit a word a winning tombstone
has just removed — without that filter the remote's live assignments would
resurrect it on the very same pass.
Images are resolved by the server's file id first and the content hash second.
Membership has always used the hash alone, but the hash is computed only when
import dedup or a reconnect asks for it, which for most libraries is never — so
a hash-only union would have quietly done nothing for the ordinary photograph.
A word lands on the local default version. Version uuids do not reconcile in the
catalog at all: ensure_default_versions mints a fresh one per device, so a
uuid-keyed join would have unioned nothing.
Removal still does not propagate. That is the trade collection membership
already makes, for the same reason — an unwanted keyword is removed again in a
second, and a silently lost afternoon is not recoverable at all.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The catalog has been able to *find* by keyword since v1 — query.rs joins the
keywords table, matches it exactly, and substring-matches it for free text — and
nothing anywhere could ever put a word there. A user could filter to a keyword
they had no way to apply.
This is the missing half: create, rename, delete, list, assign, unassign, and
the two reads a panel needs. Bulk-only for assignment, because keywording a
selection is the common case rather than the exception — the photographer picks
out the frames with the puffin in them and applies "puffin" once, in one
transaction.
Schema v6 adds `keyword_terms`, and deliberately does *not* touch the v1 join.
The assignment keeps the word as text because the catalog is a rebuildable index
and the durable copies of that fact — the sidecar, XMP dc:subject — both carry a
string; a foreign key would mean a catalog rebuilt from sidecars had to invent
identity rows before it could record anything, and would break the query path
that already works. So the text is the fact, and the new table is only the
identity a rename and a deletion can be keyed on.
`keyword_terms.name` carries no unique index, which looks like an oversight and
is not: two devices that each type "Iceland" are both right until they meet, and
a constraint would abort the merge at that moment. Uniqueness is converged upon
instead — create resolves an existing name, fuse_duplicates collapses a
cross-device pair onto the smaller uuid.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Brings in the lens-profile and neighbourhood-operation work so the card
import is verified against what it will actually be merged into, rather
than against the tree it was written on.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The unit tests either side of the base curve check halves — that the shipped
database parses and lifts its midtones, and that the generated WGSL evaluates
a curve in the right place. Neither would notice if the two agreed with each
other and both were wrong: a curve packed into the wrong uniform slots, or a
flag read from the wrong component, satisfies both and renders nothing.
So render real pixels. A flat frame through a neutral edit, once with the
Canon EOS 6D's curve looked up by name from the YAML and once with the
identity, asserting what a base curve is actually for — midtones lifted,
black still black, white still white, monotone the whole way — plus the
number an unprofiled body must still produce, so "never worse than today"
is a value rather than a promise.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The fused pass hands a fragment a colour and no coordinate. That is what buys
one dispatch for a whole edit, and it is also a wall: sharpening, noise
reduction, clarity, texture, dehaze and spot removal are each defined by what
the neighbours are doing, and FR-DEV-3 and FR-DEV-8 ask for all six. None of
them could be written at any price.
So there is now a detail stage. An operation implements `Operation` for its
parameters exactly as before — the panel, the sidecar, the history and the
presets all work unchanged — and additionally returns `Affects::Detail` and a
`DetailStage` yielding one pass per dispatch. `Affects` grows the third variant
`docs/requirements.md:250` designed and nothing had cut.
Where the stage sits is a colour-science decision, not an arrangement of
convenience. It runs after every point operation and every mask layer, so an
amount chosen against a tone curve survives the curve moving; in linear sRGB
after the camera matrix, because camera RGB has no luminance to sharpen
against; and before the output transform and the clip, because FR-DEV-2 allows
one quantisation and a highlight clipped before a convolution grows a dark
ring. The fused pass therefore ends one of two ways, and when a detail stage
follows it hands on unclipped f16 and the last detail pass encodes.
At render resolution rather than on the source, which is the whole of FR-DSP-1:
a pass before the framing prologue would cost 24 MP to draw a 2 MP preview.
`RenderScale` is what makes that survivable — a radius is stored as a fraction
of the frame's shorter edge, exactly as a mask feather already is, or as a
count of source pixels, and converted per render. It also reports when a radius
is smaller than a proxy pixel rather than drawing a plausible lie; zooming to
1:1 makes the preview exact with no second path.
`Invalidation` gives FR-DEV-3d something to mean. Moving a detail parameter
leaves the colour key alone, so `AdjustPass` keeps the linear intermediate and
skips the fused dispatch: dragging a sharpening slider costs a convolution.
Moving exposure does re-run the detail passes, because they read what the
colour pass wrote, and there is no arrangement of keys that avoids it while
keeping sharpening after tone.
Validated by a separable box blur that is not a develop operation, behind the
`detail-probe` feature and absent from a shipping build. An abstraction with no
consumer is a guess; a box blur's answer is known in closed form, so the tests
assert every byte of the ramp rather than that the edge got softer.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Colour came from whichever matrix rawler happened to key `D65`, the second
one was discarded, and the rendering was left linear. That is the dcraw
default, and FR-DEV-3e names it as the reason people abandon a converter in
the first hour: correct in the abstract, flat and poor on skin in practice.
The decoder now builds a camera profile.
- `ColorMatrix1/2` and `CalibrationIlluminant1/2`. rawler surfaces these as
an illuminant-keyed map — for DNGs from the tags, and for native formats
from its own camera database — so a Canon CR2 arrives with a tungsten
matrix and a daylight matrix exactly as an Adobe DNG of the same frame
would. Dual-illuminant support is therefore not a DNG feature here.
- `ForwardMatrix1/2`, read straight from the root IFD, because rawler parses
them and never surfaces them. Where a file carries both, they replace the
inverted colour matrix: the same relationship measured in the direction
rendering actually wants, rather than an inversion that amplifies the
measurement error exactly where skin lives.
- `AsShotNeutral`, used to estimate what the scene was lit by and to
interpolate between the two calibrations in mireds. The estimate is
circular — the temperature needs a matrix and the matrix needs the
temperature — so it is a fixed point, three rounds, as Adobe's SDK does it.
Bodies calibrated at neither D65 nor A stopped rendering uncalibrated as a
side effect: a Phase One IQ3 carries D55 and D75 and used to get no matrix
at all.
And a base curve, applied per channel in camera RGB between the last
adjustment and the conversion out of camera space — a toe, a steep midtone
and a shoulder, which is the difference between a photograph and a scan of
one. It is not an edit: no slider, nothing in the sidecar, because it
belongs to the body rather than to anything anyone decided, and a sidecar is
shared between bodies. It is not a develop node either, and `ops/README.md`
now records why. It evaluates on the tone curve's own spline rather than a
second copy, so a profile author placing a control point and a photographer
dragging one mean the same thing by it.
The curves are data. `core/dr-decode/profiles/base_curves.yaml` ships inside
the binary as a floor and is superseded by any copy on disk carrying a
higher `version:`, so a body can be added and distributed without a release
— and, under the GPL, contributed. The comparison runs both ways: a stale
pack cannot hold an upgraded binary back at last year's rendering.
Canon EOS 6D and R6, Nikon Z 6 and D750, Sony A7 III and Fujifilm X-T3 ship
with their own curves. Every other body gets a conservative default, which
is much closer to right than the identity is for any of them. A JPEG gets
none — it has already been rendered once, by the camera.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The transport was built and had nowhere to aim: put_chunked has existed since
the connector landed, and the only things pushed through it are thumbnail
shards and the catalog snapshot.
The folder segments arrive already expanded, from dr_ingest::layout, rather
than being re-derived here. That split is what makes FR-NC-7a's first
consequence true — if this module worked out the folders from whatever the
local library happened to look like, two machines with differently organised
libraries would file the same photograph in two different places on one
server.
A name is resolved against one listing rather than a probe per candidate: a
day folder is one PROPFIND and the answer covers every collision in it, where
probing costs a round trip per attempt over a link that may be mobile data.
Two cameras both produce IMG_0001.CR3, and the second must not overwrite the
first.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Distinct from a scan, and the distinction is the whole reason the crate
exists: a scan catalogues files where they already are, where an import moves
them from a card into the library. A scan that fails halfway has read
nothing; an import that fails halfway has written something.
So the failure paths are the design. Bytes stream at 1 MiB and are hashed on
the way past, so an 80 MB RAW never sits in memory. The second destination
(FR-CAT-10's backup copy) is written from the same read rather than copied
from the primary afterwards — a backup made by re-reading the primary would
inherit a bad write rather than catch it, and re-reading the card doubles the
wear on the one copy that still exists. Verification re-reads the
destination, because hashing what is still in memory would pass on a full
disk, a dying card and a truncated write alike. Anything that fails past the
point of creating the file takes the file back, or the next scan catalogues a
truncated RAW as though it were fine.
Three things the crate refuses to know. It never deletes from the card: a
move-import records what is now redundant and a separate retire() does the
deleting, because on a syncing library "safe" means the upload was confirmed
(FR-NC-7b). It does not decode, so capture metadata arrives through a probe
and a card of unreadable files costs no demosaic. And it does not know what a
duplicate is, since that is a catalog query — FR-CAT-11's two tiers arrive as
one closure asked twice, once before any transfer and once with the digest.
Camera serial would be the stronger metadata key and is absent, because
nothing in the tree reads it yet; make and model plus capture time and the
original filename is what is available, and the digest tier covers the gap.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The era-based conversion sat in library_ui.rs with two readers: the
timeline's month headings and, through format_date, the exporter's {date}
token. Import folder templates are a third, and three copies of a date
calculation that could drift apart is one too many — an image filed under a
date the timeline does not show it on is a file the user cannot find.
Moved to dr_types::time, which is where shared vocabulary lives, and given
the offset-aware reading an import needs: a shot taken at 23:30 in Tokyo
belongs in Tokyo's day, and filing by UTC would split one night's
photographs across two folders at whatever hour the offset happens to be.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Selecting a mask layer silently re-points about thirty controls at that layer's
chain. Same panel, same order, same sliders, different meaning — and the only
thing that said so was a sentence in the panel above, which a photographer
reaching for the exposure slider has no reason to read. An exposure change
lands on the whole frame when it was meant for a face, or the reverse; both are
silent, and both are discovered later. `ui-navigation.md` §1.1 calls it the
dangerous one and it is: the others in that document cost time, this one costs
work.
The remedy is the classic one for a modal fault — make the mode visible — and
the application already had the pattern. Crop arms a canvas interaction, draws
an overlay, gives the column one job and is left by the control that entered
it. Local masking is the same animal built as a peer panel, and that is what
created the ambiguity. So `crop-mode` stops being a bare boolean and becomes
one value of a three-state mode, which is the point: two modes could both be on
before, and now that is not a state the interface can be in rather than one it
is tested against.
**One strip, not two.** The mode control was going to sit beside the group
strip that filters the adjustments, which is two controls above one column
answering the same question — what am I working on. They are one control now,
`Crop · Local │ All · Light · Colour`, which is the shape Lightroom Mobile's
bottom strip has for the same reason. The two halves are different kinds of
state and are drawn differently: a mode is a chip that fills with the accent
when it is on, a group is a word with a rule under it. That difference is what
lets both be read at once, which they routinely are — picking Light while a
mask is selected filters *that layer's* chain and does not leave the mode.
Dropping the scope on a group press would be the same fault coming back from
the other end, and would make Light mean two things depending on where it was
pressed.
The strip stays pinned above the develop column rather than moving to the top
of the canvas as the document proposed. The half that filters the column
belongs to the column, and the photograph is the subject. The canvas keeps one
button, which now names the mode it leaves rather than saying "Done" — that was
unambiguous with one mode and would not be with two — because the column can be
closed on a narrow window and no mode may be inescapable.
Entering a mode is a side effect, so Rust owns it rather than the strip writing
the property: crop drops the zoom, local turns the overlay on, and leaving
clears the selection. That last one is the fix. The "Overlay" and "Select"
toggles are gone because they armed things that are simply what the mode *is* —
a mode that has to be switched on separately is one you can enter and have do
nothing. Escape and the Android back gesture join `back_step` as one
`LeaveMode` rather than a second exit concept, and the mode is left before the
zoom is: it was entered later, and it is the bigger step back.
The heading is where the scope goes. Not a caption beside the panel, the
heading *of* the panel that changed — `ADJUST` becomes the layer's name, the
same string the selected row in the stack shows. That is the difference between
describing a hazard and removing it.
**Handles on the photograph.** A linear or radial mask could be created and
then not moved, so a radial sat at the centre of the frame at its default size
for ever. Three faults stood in the way of drawing one.
The first is that a gradient did not render at all until the model had run. The
rasteriser was built on the way out of `segment` and the array's size was read
*off* the segmentation, so a gradient added to an unsegmented photograph
produced nothing — silently, in the same way exports and thumbnails once did:
the shader still emits the layer's block and the empty placeholder multiplies it
by zero. The proxy size is a property of the photograph. Both are derived from
it now, and deliberately at the same size rather than by coincidence, because a
subject's distance field is sampled against that array.
The second is hit-testing. A handle is drawn in output coordinates and stored
in source ones, and between them lie the crop, the zoom, the pan, the
straightening and the turns. `Framing::source_at` is `wgsl_prologue` evaluated
on the CPU, kept in that file beside it so that keeping the two in step is one
file's problem — a handle mapped through anything less drifts off the mask the
moment the view moves, which is exactly what masks are rasterised in source
space to avoid.
The third is that a drag is a displacement, not a destination. Each handle
answers to the movement of the pointer since the press, applied to where the
mask was when the press landed. Snapping the handle to the pointer instead
jerks it by up to half a touch target on the first press, and the target is
finger-sized because a tablet has no hover to reveal a control and no modifier
to qualify it.
A ramp gets three handles — centre, width, angle. An ellipse gets three too:
centre and one per semi-axis, the major one carrying the direction as well as
the length, because where an axis is put says both. It had a fourth, and it is
gone: standing off the shape by a fixed distance, the rotation arm began
outside the photograph at the size a new radial is created at, so the first
thing anyone saw was a control they could not reach without first shrinking the
mask.
Two faults here were found by looking at the screen rather than at the source,
both of the kind that cannot be found any other way. A `1px` rule with a size
and no position is *centred* by Slint, so the seam between the photograph and
the column was a hairline down the middle of the panel, through the histogram
and every slider under it — twice, once in `app.slint` and once in
`AdjustPanel`. And handing Slint a fresh model for the handles on every pointer
event made the repeater rebuild its items, taking the `TouchArea` holding the
gesture with them: the handle jumped once and then went dead under a finger
that was still down. `develop.rs` carries the same warning about the parameter
rows, where it broke slider drags; the model is rewritten in place now.
The tests worth having are the ones about ambiguity and about the map. That the
same row reads the frame's value, then the layer's, then the frame's again is
§1.1 in one assertion. That dragging a handle onto another gradient's matching
handle *produces* that gradient closes the loop between the two directions of
the framing map, through a view that is cropped, zoomed, panned, straightened
and quarter-turned at once — a one-legged map is invisible when the framing is
neutral, because then both legs are the identity.
Not done here: the histogram still reports the whole frame while the sliders
edit a layer. That disagreement is real and is N3's, which this unblocks. The
strip has room for a Brush entry beside Crop and Local when the painted masks
land in the core, and it needs nothing here but the canvas interaction.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A linear mask at 45° was not at 45°, and a radial with equal radii was an
ellipse. Both on every photograph that is not square, which is all of them.
The geometry is stored in normalised coordinates so that a mask survives a
crop, a zoom and an export at another size — that part was right. What was
wrong is that a *distance* was being measured in those coordinates too, and a
fraction of the width is not the same length as a fraction of the height. So
`dot(uv - centre, axis)` measured the ramp in a space one of whose axes is
squashed against the other by the aspect ratio, and the iso-lines came out
sheared: on a 3:2 frame a ramp asked for at 45° arrives at about 34°.
Nothing announces it. The stored numbers are exactly what was written, the
shader is doing exactly what it says, and the only place the fault exists is
between the photographer's intent and the picture. It has been invisible so far
because there is no way yet to place a gradient by eye — the handles that make
it visible are what turned it up.
So distances and angles move into the frame's own isotropic units: y spans
`0..1` and x spans `0..aspect`, which makes a circle round and 45° a real
diagonal. The centre stays a plain fraction of each axis, because it is a point
and a point has no such problem — and because that is the space a click arrives
in. `frame_delta` is the one conversion and must stay the only one; the mask
array's own dimensions carry the aspect, so it costs no uniform.
The sidecar format does not change. What changes is what the numbers mean, and
the only geometry in the wild is a default that has never been movable.
The two tests are at 96×64 rather than square, which is the whole point: on a
square target this bug cannot be reproduced, and every existing mask test was
square. Both fail without the conversion — the radial reaching 28px sideways
where it reaches 19px down, and the diagonal landing on the wrong side of the
line it is supposed to lie along.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The last line of FR-DEV-3, and the mask ARCH §5.4 was written for. darktable
rasterises drawn masks on the CPU and users call the result unworkable; the
architecture's answer is that a stroke arrives as *parameters* and the device
draws it. This is that, from the model through the sidecar to the pixels — but
not the finger: the canvas is somebody else's change, and this leaves it a
seam rather than reaching into it.
**A stroke is a swept disc along a polyline**, plus erase, radius, hardness and
flow. `MaskSource::Brush` holds an ordered list of them, and the order is the
mask: an erase after an add takes it away and the same pair reversed does not.
Nothing about it is pixels, which is what makes a mask that costs a line of
text, diffs by the gesture, and survives a crop, a straighten and an export at
any size — the properties a stored raster has none of, and the same argument
the region ids were chosen for.
Two things keep the point count honest. While the finger is down, a position
closer to the last than an eighth of the radius is dropped: a touch screen
reports 120 a second, so a finger held still for five seconds is six hundred
points in the same place, and simplification would only remove them once the
gesture had ended — after every frame in between had drawn all of them. When
it ends, Douglas–Peucker at an eighth of the radius removes what a disc that
wide cannot express: a swept circle moved by r/8 moves its own edge by r/8,
which is inside the soft part of any brush. Coordinates snap to a
ten-thousandth of the frame on the way in *and* are written at that precision,
so a round trip is exact rather than nearly exact — a file that drifts in the
sixth decimal every save is a per-field merge conflict a day, over nothing.
**Cost is why the strokes are not drawn by the full-screen triangle the other
masks use.** A swept disc is the minimum distance to any of its segments, so a
stroke over the whole frame costs `pixels × segments` and both terms grow
together — the quadratic that is darktable's problem moved onto the GPU rather
than solved. Each stroke is instead drawn over its own bounding box, grown by
the radius, so the rasteriser never invokes the shader for a pixel the stroke
cannot reach: `area(box) × segments`, which for a dab or a swipe is a small
fraction of the frame. A gesture past 256 points continues as a second stroke
for the same reason, since a shorter stroke has a smaller box.
Add and erase are `dst + a(1 - dst)` and `dst(1 - a)`, which are exactly a
source-over and a one-minus-source blend — so they are blend state, not
arithmetic, and no pass ever reads the slice it is writing. That is what
permits one draw per stroke at all. Within a stroke the coverage is the
*minimum* distance over its segments rather than a sum: a path that crosses
itself must not build up where it did, or every circle and every scribble
would be blotchy wherever consecutive dabs overlap, which is everywhere.
Not a distance field, deliberately. `dr-segment`'s transform documents the two
conditions that make CPU work right there — once per mask edit, over input
already CPU-side — and a stroke fails both: it changes while the finger moves,
and its input is a handful of coordinates that never needed to be pixels. It
also needs no transform, because the distance to a swept disc is closed form.
A stroke is the one mask whose distance field is known without computing one.
An unpainted brush layer is inactive rather than empty, which is not an
optimisation: `invert` turns empty into everything, so a layer created with
invert already set would apply its adjustment to the whole photograph before a
single stroke was made. That is the loud, confident kind of wrong this codebase
refuses everywhere else a mask can go missing, and there is a rendered test for
it.
The tests read pixels back off a device rather than checking that the two
halves agree with each other. What they pin down is what is silent when wrong:
the y flip between mask space and clip space, which a centred stroke would not
notice; a bounding box not grown by the radius, which makes a tap draw nothing
at all; an aspect ratio ignored, which makes a dab an ellipse on any frame that
is not square; a stroke doubling back and building up; and an erase that lost
its place in the order and put back paint the user had taken off.
Not done here: the interaction. The canvas needs to begin, extend and end a
stroke on the active layer, and `DevelopSession::rasterise_masks` still returns
early without a segmentation — it takes the proxy size from one, and a brush
needs no model to have run over the photograph first.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Reported as a thumbnail bug; the export had it too, which is the serious
half. You would have exported a photograph missing every local adjustment.
Both called the unmasked `render`, and the failure is silent by
construction: the generated shader always declares the mask binding and
always emits a block per active layer, so binding the empty placeholder
multiplies each of them by zero. No error, no warning, no missing texture —
the adjustments are simply not there. From inside either path there is
nothing to see.
Every path that produces pixels now goes through one helper that binds the
array, and that is the point of it being one helper rather than three
correct call sites. The array is rasterised in source space at proxy size
and sampled through the framing map, so one array serves every output size:
a 256px thumbnail and a 24 MP export bind the same texture.
Three tests, and the first is the fault stated directly — render the same
edit with and without the array and assert they *differ*. If binding it ever
stops mattering, the masks have stopped reaching the shader. The third
checks the masked share of the frame is the same at 32px and 128px, because
"both non-empty" would pass while a mask that scaled wrongly still ruined
every thumbnail.
A strip of groups over the adjust panel — Light, Colour, Detail — derived
from the attributes the operations declare. `adjust.slint` names none of
them: the strings arrive resolved and the panel only draws them, so a new
operation joins the right group by saying what it is and this file does not
change (FR-DEV-3a).
A group nothing carries is not offered, so a tab never opens onto nothing.
Geometry is left out because its one operation prefers an on-canvas widget
and is skipped by the row builder — a Geometry tab would be empty while
`GeometryPanel` holds the real controls. The strip appears only when there
is more than one group to choose between; a single tab is a control with one
option.
The selected group is underlined rather than filled. The accent means
*modified* everywhere else in this interface, and spending it on "which tab"
would blunt the one signal the panel has.
**The trap, and it nearly bit again.** `op_index` on a row counts over every
capability, not over the ones a filter kept — it is how a row routes back to
the core. Renumbering it while filtering would make a slider drive a
different operation, which looks like a rendering fault rather than a
routing one. `rows_filtered` keeps `enumerate` over the full list and only
`group_head` is a position within the emitted rows; a test moves a value
through a filtered row and checks it lands where it was asked to.
Six tests, including that a nonsense index falls back to showing everything
rather than to showing nothing.
Tool tabs need a taxonomy, and the taxonomy was the problem: a table in
`ui/` mapping operation to tab breaks FR-DEV-3a, and a `group:` field risks
what `ui-refinement.md` condemned `starts-group` for — the core deciding
where the panel draws things.
`Attribute` threads the needle. It says what an operation *is* — tone,
colour, detail, optics, geometry, effect — which is the same category as
`ParamKind` and squarely on the core's side of ARCH §4.3a's line. What is
drawn, where it sits and whether it is visible stay the frontend's. There is
no attribute for "the third tab", the enum's order is declaration order
rather than screen order, and a frontend may render these as tabs, as
headings, or ignore them.
The payoff is that a tab strip can be *derived*: the groups are the
attributes present in the capability list, so the interface names no
operation and needs no table to keep in step. An operation joins the right
group by declaring what it is, which is the one thing its author is well
placed to say.
Plural, because the tone curve is genuinely both — an RGB curve is tonal and
the per-channel curves are chromatic, and filing it under one would hide it
from half the people looking for it.
Required and non-empty, enforced in `build.rs`, and the failure was checked
by removing the line rather than assumed. An operation with no attribute is
invisible to a panel that groups by them; a build that stops costs ten
seconds, a control nobody can find costs more. The vocabulary is closed for
the same reason: a typo would otherwise invent a category holding exactly one
operation, which looks like a deliberate one until somebody counts.
Six tests over the real chain, including the hand-written operations that
`build.rs` never sees and so cannot check.
dtourolle
