e86edef47cee4dce24a4f0fdc7307481c2111567
457
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  dtourolleandClaude Opus 5
|
b9891e2c04 |
Merge master into tablet-selection
Two real conflicts, both from work that landed either side of the same lines rather than against them. `lib.rs`: the settings controller was hoisted above the People screen's wiring, and Android's thumbnail-tier eviction registered itself at the same point. Independent, so both stay. `library.rs`: manual collection ordering and burst folding each added a clause to the same two queries. The scoped range read now carries both — the folding matters there for one step further on than it does in the grid, because a collapsed burst is one cell, so an ordinal counted over a list still holding every frame names a photograph several places away from the one the user pointed at. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
23c74d7063 |
Put the grouping dials where the regrouping is
The merge probability was `dr_face`'s constant and the smallest group was a bare `< 2` in the clustering pass. Both were tuned on one library — 1,813 faces of one photographer's family — and the quantity they optimise is a property of the population, not of the model. A household at close family resemblance and two thousand strangers at a wedding want different answers, and neither of them is the reference library. The doc comment already conceded the point and pointed at `face_index --tune`; a photographer does not have a terminal. So they are `FaceSettings` now, saved per device beside the cache budgets and edited from the People screen — beside the Regroup button that applies them and the rail that shows what they did, because a value changed three screens away from its effect is one nobody can tune. Moving them is safe by construction, which is why nothing asks for confirmation: a regroup writes only the suggested half, and confirmations, names and ignores enter as anchors and come back unchanged. The smallest-group rule is applied only to groups the system invented — a group the user named or set aside survives it whatever its size, because a display preference does not overrule a judgement. **Withdrawal, without which the setting does nothing visible.** Raising the smallest group stops the pass creating small groups; it does not remove the ones a previous pass made, because those still hold their suggestions, so they are not empty, so the prune leaves them. The pass now releases every unanchored face it did not place before pruning. And a dial you cannot see the effect of is not a dial. "What would this do?" runs the same population through the clusterer without opening a transaction and reports groups, faces grouped and largest group — one row of `--tune`'s table, on the user's own library, on a worker thread. The line leads with the group count because that is the number that says which side of the right setting you are on: it climbs as fragments are gathered into people and falls as separate people start being welded, while the grouped-face count rises straight through both. The preview parks its poll timer in a slot of its own. A preview and a regroup are allowed to be in flight together, and sharing the sweep's single slot would have the second to start drop the first's timer — visible as a Regroup that finished on its worker and never said so. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
a4b9deaf96 |
Put the people filter where the filters are
Narrowing the grid to two people at once has worked since people became a selector term, and it was effectively unreachable. The only control that could add a second person lived on the People screen, behind selecting them there, and it appeared only once the grid was already narrowed to somebody — so "photographs with both of them" needed a two-screen round trip the user had to guess at. A filter belongs on the filter bar. A "People" chip there opens a tray of everyone the library knows; tapping a name adds or removes them, and the any/all chip beside it — already there, and already the thing nobody found — now has something to sit next to that explains it. The caption leads the row so a pair of chips means something before either is pressed. The tray is a strip under the bar rather than a popup, the way the develop column's film picker is: the view scrolls as one, so an inline strip is taller content and not a second overlay to dismiss. It scrolls horizontally for the same hard reason the bar above it does — a layout cannot be narrower than its children's minimums, and forty people would otherwise set the minimum width of the whole view. The roster is built on open, not kept in step: indexing and regrouping change who exists, and a list cached at startup would be stale for exactly the user who has just been naming people. Named first, then by how much of them the library holds — the catalog orders by face count alone, which puts a dozen unnamed strangers ahead of the two people the user actually cares about. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
2403f355d6 |
Tell a tap on a photograph from a hand going past
A brush across the grid opened whichever photograph was under it. Travel was already answered — the Flickable claims the pointer and the press is cancelled — but a contact that neither travels nor lasts reaches a TouchArea as an ordinary press and release, and it was landing the user in develop. So a finger now has to stay down for `TAP_MIN_MS` before letting go counts as opening anything. That is the floor under a tap where the 450 ms `HOLD_DELAY_MS` is the ceiling: below is a graze, between is a tap, above is a hold that starts a selection. One scale, three gestures. Only a finger is held to it. A mouse click is a discrete decision made by a button and is routinely over in thirty milliseconds, so `cell-pressed` now reports whether a finger did it — the same finger-id convention the pinch arbitration beside it already uses — and the dwell applies to touch alone. A graze still *selects* the cell it landed on, because the press already did that. That is the right failure mode: something visible and reversible rather than a silent nothing, and rather than develop. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
bbbc23f376 |
Let go of the keyboard when a name is finished
Pressing Enter on a person's name committed it and then kept the field focused, so on a tablet the on-screen keyboard stayed up over the faces the user had pressed Enter to get back to. The name looked accepted and the screen looked stuck. `Field` grows `release-focus()`, the other half of the `take-focus()` it already had, and the Identity screen calls it from `accepted`. A function rather than a property for the reason the existing one gives: focus is an event, and bound to a property it would fight anything else that took it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
82d9d077b0 |
Merge: answer Android's memory warnings, and stop reporting a lost root as an empty library
FR-PLAT-AND-5 in full, FR-PLAT-AND-2 in part -- the recovery is built and live for Nextcloud roots, the SAF cause it names does not exist yet. FR-PLAT-AND-4 and FR-PLAT-AND-6 are not here, both blocked behind the same gap: assemble-apk.sh compiles no Java, so the APK cannot carry a Service or a FileProvider. The container has JDK 17 and build-tools 36; the build step is what is missing. Verified: fmt, clippy --workspace --all-targets -D warnings, and 1043 tests across dr-catalog, dr-sync, dr-sync-folder, dr-sync-nextcloud, dr-plat and dr-ui. The aarch64 target was checked before the branch was finished but not after; no device was available. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
75fd5619ca |
Refuse a scan whose root has gone, instead of reporting it empty
FR-PLAT-AND-2, and a silent failure on both platforms. `dr_sync::scan` stepped over a NotFound or PermissionDenied the way it does for a child that vanished mid-walk -- correct for a child, wrong for the root, where it ended the walk, returned Ok with nothing in it, and reported a successful scan of a library that was no longer there. A lost root is now its own error. The images under it are marked Availability::Offline per FR-CAT-9 and no catalog row is deleted; `library::persist` clears the mark per file as each one is listed again, so a root that comes back needs no repair step. Partly satisfied rather than closed, and the gap is worth stating. The recovery half is real and reachable on Android today, because `map_status` turns Nextcloud's 403 and 404 into it and Nextcloud is how a phone actually gets a library in this build. The causes the requirement names -- revocation, reinstall, a removed card -- are properties of a persisted tree permission, and there is none: SAF does not exist here, `SourceRef::Document` is constructed only in test modules, and `LocalStorage` rejects the variant outright. When SAF lands it becomes a third producer of this error and nothing above it changes, which is why the discovery belongs in the connector. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
2b812ebe21 |
Give memory back in the order the user will miss it least
FR-PLAT-AND-5. Android asks for memory back through onTrimMemory and kills the process if it is not given; until now nothing listened, so the answer was always "no". A tiered registry answers instead: GPU caches first, then proxies, then thumbnails, driven from android_main on MainEvent::LowMemory and MainEvent::Stop. The order is the argument. A backgrounded app has no window to draw and therefore no use for a render pipeline, while its thumbnails are exactly what the user will be looking at half a second after they come back -- so going into the background frees only the GPU tier, and only being measured against death frees everything. Sinks register beside the cache they free and hold weak handles, so the registry cannot keep a controller -- and every decoded portrait in it -- alive past the interface it belonged to. `try_borrow_mut` and skip: a warning can land mid-render, freeing textures under the code drawing with them is worse than missing one, and a warning not acted on is always followed by another. The GPU test is the one that matters: an eviction must change no pixel. A freed intermediate pool whose `colour_key` promise still stands renders an empty texture, and nothing else would have caught it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
6246a2e346 |
Merge: group the frames of one moment, and let a burst fold away
FR-CULL-5. Frames join a burst when they are adjacent in time and look like the frame before them -- both, because time alone groups a whole ceremony and similarity alone groups a studio setup across two days. Adjacent pairs only, chained; there is no all-pairs step and there must never be one. No selection of any kind. The representative is the earliest frame, a fact about the clock rather than a judgement about the photograph, and a newly found burst arrives open, so the pass never takes a row off the screen. Verified: fmt, clippy --workspace --all-targets -D warnings, 346 dr-catalog tests, 511 dr-ui tests. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
fc4157a1e0 |
Keep the test scene's own arithmetic from overflowing a u64
The first compile this branch ever had. `cargo fmt` reflowed four files and clippy passed at -D warnings untouched, but one test panicked: `the_signature_does_not_change_with_scale`, on "attempt to multiply with overflow". It is the fixture, not the feature. `scene()`'s little LCG multiplied the block's y by the golden-ratio constant with a plain `*` while the term beside it already used `wrapping_mul`, so any scene taller than about 104 pixels overflowed in debug. Only the scale test builds one that large, which is why 345 of 346 passed around it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolle
|
91fe6cf300 |
Merge master into partial-preset-scope
🐳 Android image / Build and push (push) Successful in 8s
Build and test / android-image (push) Successful in 8s
Build and test / Desktop (Linux) (push) Failing after 1h17m12s
Build and test / Layer separation (push) Successful in 56s
Traceability / Requirement traces (push) Successful in 1m33s
Build and test / Android (aarch64) (push) Successful in 1h0m38s
# Conflicts: # docs/traceability.md # ui/dr-ui/ui/app.slint |
||
|
dtourolleandClaude Opus 5
|
754ab91347 |
Bring a Lightroom library across, and start with something in the list
Two halves of the same complaint: a preset sheet that opens on "No presets yet" is homework, and a photographer with ten years of presets in Lightroom has no way to bring them. `dr-preset-xmp` reads Camera Raw `.xmp`. The mapping turned out to be mostly a rename rather than a conversion, because Adobe and this pipeline already agree: exposure is in stops in both, and contrast, the four recovery controls, clarity, texture, vibrance and saturation are all ±100 in both. That is not imitation, it is the convention raw developers converged on — `highlights_shadows.yaml` cites it in as many words. Only sharpening needed arithmetic, Adobe's 0…150 against our 0…100. The white balance does not come across, and says so rather than guessing. Adobe writes absolute Kelvin for a raw file where ours is a relative nudge from what the camera recorded, so converting needs the *target image's* as-shot white balance — exactly what a preset cannot carry, since the same preset lands on a frame shot at 3200K and one shot at 7000K. A guess would be wrong on most images and invisibly so. A folder is read as readily as a file, nested, because that is the shape an exported preset folder is in and importing ninety files one at a time is asking someone not to bother. `dr_pipeline::starter` is six presets a first run begins with, written against this pipeline in its units and deliberately mild — a starting point, not a caricature. They are seeded when the library *file* does not exist rather than when the library is empty, so deleting all six does not hand them back on the next launch. Both of these name operations, and `ui_names_no_operation` was right to stop them living in `ui/`. That test exists because the failure is silent and cumulative, and it caught exactly what it was written for: a preset called "Punch" is a statement about contrast, clarity and vibrance, and a table mapping Adobe's vocabulary to ours is a statement about the pipeline. Neither is a fact about an interface. So the starter set went into `dr-pipeline`, and the importer into its own crate — between two walls, since `dr-pipeline` depends on nothing on purpose and XMP is real XML not worth hand-rolling. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
36ea53cceb |
Merge: stop a subject's name from setting the width of the develop column
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
3e19628324 |
Stop a subject's name from setting the width of the develop column
The column moved sideways the moment segmentation finished. It takes the widest minimum any panel declares, each panel publishes `layout.preferred-width` as that minimum, and `MaskPanel` gained rows whose width came from the model's output -- so a photograph the user was looking at jumped because a label said "traffic light". `overflow: elide` did not prevent it and was never going to. Eliding is what a `Text` does when it draws; at layout time it still asks for the width of its whole string, and it is the asking that reaches the column. Both the subject rows and the mask entries are bounded, because a mask is itself a segmentation result -- without the second half the column moved when a subject was clicked instead of when one was found. The bound is stated for the reason `ChipGrid` declares its width from its column count rather than from its options ( |
||
|
dtourolle
|
4a04496c78 |
Merge: focus peaking, so a frame can be judged without zooming to 100%
FR-CULL-3's peaking half. The raw histogram and raw clipping indicators remain unbuilt -- what exists is a display histogram tagged FR-DSP-7, counting AdjustPass's 8-bit output, which reports a highlight as gone precisely where FR-CULL-3 needs it to report the highlight recoverable. Verified before merge: fmt clean, clippy --workspace --all-targets -D warnings green, 11 focus GPU tests, 79 baseline dr-gpu tests, 511 dr-ui tests. The cfg(target_os = "android") arm is unverified -- the host-target clippy never compiled it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> # Conflicts: # ui/dr-ui/src/lib.rs # ui/dr-ui/ui/app.slint |
||
|
dtourolleandClaude Opus 5
|
2168cdd1c4 |
Mark what is in focus, so a frame can be judged without zooming to 100%
FR-CULL-3's focus peaking. One compute dispatch measures local contrast in WGSL and writes an overlay texture; on desktop it reaches Slint through the same zero-copy wgpu import the canvas uses, so nothing per-pixel touches the CPU on the frame path. With peaking off the cost is zero and structurally so: focus_overlay opens with `let settings = self.peaking?;` before the frame is touched, and clearing drops both overlay textures, so no VRAM is held either. NFR-P14 is met by construction rather than by measurement -- one dispatch, no second render, no pipeline compile after session open, and a test asserting allocations stay at 2 over eight frames. The budget test asserts 50ms at 4K rather than a tight bound, deliberately: a tight bound fails on a loaded machine and gets deleted, which is worse than a loose one that still catches the regression that matters. TD-1 is amended rather than joined by a TD-6: on Android the overlay rides the readback that already exists there, roughly doubling that transfer while peaking is on, and TD-1's own "Done when" removes both because both are the same missing capability. Verified: cargo fmt clean; clippy --workspace --all-targets -D warnings green, which also compiles peaking.slint through dr-ui's build.rs; 11 focus GPU tests and 79 baseline dr-gpu tests pass; 511 dr-ui tests pass. Not verified: the cfg(target_os = "android") arm, which the host-target clippy never compiled. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
7ad75dd905 |
Let a manual collection be put in the order the photographer wants
`collections::set_order` and `Sort::CollectionPosition` have been in the catalog since collections were, and nothing above dr-catalog has ever called either. A manual order existed, could not be seen, and could not be set. This is the half that was missing. Three pieces, because it needed all three to be visible at all. The catalog gains `orders_manually` and `members_in_order`. The first is the rule about *when* a manual order means anything, kept in one place with one name: a collection must be manual, and it must have no children. A set shows its descendants' images, and positions are only ever assigned within one collection — so two children's positions are unrelated integers, and ordering by them would sort the grid by a coincidence. The existing comment on `read_cells_scoped` already argued this; now something enforces it. `members_in_order` returns the *whole* membership rather than the filtered view, because `set_order` renumbers exactly what it is handed. Reordering a filtered list would renumber those and leave every hidden image on a stale position — two images sharing one, and a grid that rearranges itself the moment the filter comes off. The grid reads position where the scope qualifies and capture time everywhere else. Manual order joins the member row rather than testing membership with `IN`, which is safe from fanning out rows *because* that branch is a single collection. The gesture is a DropArea over the viewport, drawn only where a reorder means something, with a caret in the gap the photographs would go into — a line between two images rather than a highlight on one, because lighting up a cell would say the drop replaces it. The trap worth naming: `DropEvent.position` is in **window** coordinates. Slint maps it through `map_to_window` when the drag begins and hands every target the same event untranslated, so a target inside a Flickable has to subtract its own `absolute-position`. Getting that wrong is invisible until the grid is scrolled, because at the top the two frames coincide. `reordered` is pure and names its destination by the image it goes before rather than by an index, because the grid can only name a gap in what it is showing and the ids are what survive a window swap. A drop that changes nothing returns the order untouched: that counter is what a cross-device merge resolves by, and spending a revision on a no-op makes this device win an argument it did not have. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
115653a262 |
Mark a burst in the grid, and let it be folded away
The counterpart to the grouping: where the signatures come from, and how a group reaches a cell. Signatures are computed from the 256px thumbnails dr-thumbs already holds -- vastly more resolution than a 9x8 reduction can use -- so a library that has been browsed, or that has synced somebody else's shards, has already paid for them and no RAW is decoded for this. The consequence is stated rather than hidden: an image with no thumbnail gets no signature and never joins a burst. That is self-correcting, and it is why the pass runs when the thumbnail sweep finishes rather than on a timer. Nothing happens at import and nothing happens at query time. The mark is drawn as a child of the cell's TouchArea, for the same reason the star strip is: a click on it must not also reach `cell-clicked` and throw the user into develop, and children are hit-tested before the element they sit in. It is never hidden on hover the way the stars are -- a collapsed burst stands in for frames that are not on screen, and something has to say so whether or not a pointer is nearby. Folding changes what the grid's *query* returns rather than what its cells draw, because the grid is a window over an ordered query and the frames a fold hides are mostly not loaded. So the predicate joins VISIBLE in every query that lists or counts cells -- the window, the header's count, the run a shift-click resolves, and the ordinal a scrub lands on -- under the discipline VISIBLE's own comment sets out: present in four places of five is worse than absent, because the counts disagree with the cells and neither looks wrong on its own. There is a test for exactly that. `the_window_read_walks_the_ordering_index` now includes the burst clause. It asserts on the query plan while holding its own copy of the query, so left alone it would have gone on reporting green against a query the grid no longer runs. If the clause costs `images_grid_order` and puts the sort back, that fails here rather than becoming jitter someone measures in six months. The pass keeps its own drain timer in a thread-local instead of taking fields on the library controller, so everything the feature needs to run lives in one file and the screen that starts it holds nothing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
bb35665bd2 |
Let a paste carry some kinds of edit and not others
FR-DEV-6 asks for presets "covering a subset of the edit graph". What landed with the named presets covered two subsets: everything, and everything but the crop. "Match the colour but not the sharpening" had no way to be said. `Scope` is now a set of `Attribute` — the same six kinds every operation already declares and the develop panel already builds its tabs from. The photographer ticking "tone and colour" is naming the groups they navigate by, and neither this module nor the interface has to name an operation to do it (FR-DEV-3c). The pleasing part is what left. Framing used to be excluded by an explicit test against one operation's id; it is now excluded because Geometry is not in the default set. The special case dissolved into the general rule, and the argument for it — a crop is a decision about *this* photograph, and carrying it across forty destroys forty compositions — is now a statement about a kind of edit rather than about a node. All thirty-three existing preset tests pass unchanged, which is the evidence that the generalisation kept its promises. One decision that is a field rather than a rule, because the two cases genuinely differ. An operation this build cannot classify — from a newer version, arriving over sync — travels under "everything" and "everything but the crop", because those are claims about the whole edit and an unrecognised operation is part of it (FR-NC-8). It does not travel under a hand-picked set, because that is a claim about kinds, and an unknown kind is not one of the kinds that were ticked. The settings page's "Copy crop and rotation" checkbox is gone, replaced by the same chips the preset sheet draws. It asked the right first question — geometry is the kind whose accidental travel destroys work — but it was the only question a boolean could ask. The field stays in `Settings`, read exactly once to seed the new set, so anyone who had ticked it keeps their behaviour. The chips are deliberately not in the develop column. Six of them there would set the width of the whole sidebar, which is the bug `ChipGrid`'s comment records at length. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
1cd58bcaaa |
Say where a range ends in words, instead of hiding it in a double tap
Touch has had a range gesture for as long as selection mode has: hold to
enter it, then double-tap the far cell. Nobody finds it. It is invisible,
it is unreliable on a grid that scrolls under the second tap, and it
extends from the anchor as it was *before* the two taps moved it — a rule
subtle enough to need two paragraphs of Rust to explain itself.
The deeper problem is the timer. A double tap is bounded by the double-tap
interval, so the two ends have to be on screen together. The ranges that
actually hurt on a tablet are longer than a screenful, and those are
exactly the ones it cannot describe — which is also why a drag-to-select
sweep would not have fixed this, and why it is not what went in.
So: a "Select to…" button arms the range, the strip stops reporting and
starts instructing ("Tap the last photograph — scroll first if you need
to"), and a Cancel puts it down. Nothing is timing the two taps, so the
user may scroll as far as they like between them, and the run is resolved
by the catalog rather than by what happens to be loaded.
An armed range reaches Rust as `cell-pressed`'s shift argument, because
that is what it is: `apply_press` already reads ctrl+shift as "add the run
from the anchor to here", and in selection mode ctrl is already set. So
this needs no Rust state and no third selection policy — one copy of the
rules, in the function that had them.
"Select all" goes in beside it, asked of the catalog for the same reason:
the window is a hundred cells over a library of thousands, and a select-all
that quietly meant "the hundred that are loaded" is a lie the user cannot
see until the export runs. It sets the anchor to the first frame, or a
"Select to…" straight afterwards would reach `apply_press` with no anchor,
take its shift branch, and clear everything it had just taken.
The strip is at four buttons and a count now, so "New collection from
selection" loses its tail — the sheet it opens already says "New collection
holding 12 photographs" across the top.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
dtourolleandClaude Opus 5
|
ab49280614 |
Ask for the collection's name before there is a collection to name
"New collection from selection" created the collection under a placeholder name and then opened the sidebar tree's rename field to correct it. On a tablet that field is not on screen. The collections panel is always instantiated — app.slint collapses it to zero width and `visible: false` rather than using an `if`, because an `if` there is a layout loop Slint panics on — so the rename TextInput was created all the same, its `init` called `self.focus()`, and Android raised the on-screen keyboard for a box nobody could see. Nothing else on the screen is focusable, so the keyboard had nowhere to go back to: it stayed up, the name could not be typed, and the collection was already written under the name the user did not want. Asked in a sheet instead, on the same card, scrim and dismissal the filing and keywording sheets use. The field takes the keyboard as the sheet appears — over a field that is actually drawn, which is the whole difference — and the card sits a third of the way down rather than centred, because on a tablet the keyboard is the bottom half of the window. Nothing reaches the catalog until Create. That also ends a second bug the old order could not avoid: an abandoned rename used to leave a collection called "New collection" behind, because creating came first. `Field` grows a `take-focus()` for this. A function rather than a property: focus is an event, and bound to a property it would fight whatever took focus next and re-take it on every unrelated re-evaluation. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
ab0ef6a26d |
Say which requirements the code was already satisfying
Thirteen requirements were surveyed as built but untagged. Eight of them were: R3, R6, FR-DEV-1, FR-UI-6, FR-NC-6d, NFR-OPS-3, NFR-PORT-2 and NFR-SEC-3. Each was read against its full text in requirements.md and against the code before the tag was added, because a tag that is wrong is worse than an absent one — it turns a visible gap into an invisible one. The five that were refused, and why, because the reasoning is the part worth keeping: R2 carries "(figure TBD)" in its own acceptance criterion and asks for a stated prefetch margin and cache-hit rate; neither figure exists anywhere in the tree and neither quantity is measured, while TD-2 and TD-3 both describe the thumbnail path falling short of it. R5 asks for three things and the code does one. The display pipeline does run at viewport resolution, but "only visible tiles are computed" and "panning recomputes only newly exposed tiles" need a tile scheduler that does not exist — and frame_budget.rs currently argues for striking tiled computation from the interactive path rather than building it. FR-RAW-2 asks for a trait taking a SourceRef, so that a second decoder can be added without changing callers. What exists is free functions over &[u8]. That meets the requirement's stated *purpose* — the same decoder serves a local file, a SAF document and a byte range, which is exactly why it takes bytes — but there is no trait and no second implementation seam, so the requirement should probably be amended rather than tagged. NFR-ARCH-1 asks for named executors with stated thread counts. architecture.md §7.1 states the table; nothing implements it. Workers are twenty-odd ad-hoc std::thread::spawn sites, each building its own one-worker tokio runtime, with no decode pool, no GPU-submit executor and no I/O pool. The requirement's own text says R4 and NFR-P9 "assert an outcome with no stated means", and that is still true. NFR-SEC-4 is satisfied by absence — there is no telemetry — and absence has no module to tag. A tag would point at nothing. NFR-OPS-3 was the closest call of the eight taken. The store is single, separate from the catalog, survives a catalog rebuild and does not sync between devices; it has no version *field*, deliberately, and settings.rs argues why and names the condition that would need one. The substance is met and the reasoning is recorded where it belongs. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
5a8327824f |
Keep an edit under a name, not just on the clipboard
FR-DEV-6 asks for three things — named presets, copy/paste between images, and batch-apply to a selection. The last two have been here for a while; this is the first. The format is the sidecar's, deliberately. A preset *is* the non-default half of a version, so the lines are the same lines keyed the same way, which makes the two files diffable against each other and lets someone debugging an edit paste a block from one into the other. One file rather than one per preset: a preset per file makes the name a path, and every name then has to survive a filesystem — a `/` becomes a directory, a name differing only in case collides on one platform and not another, and renaming becomes two operations that can half-fail. As a key in a document it is none of those. Unknown *parameters* needed no machinery. `Preset` already holds whatever keys it is given and resolves them against the descriptors only at apply time, so one written by a newer build survives by being stored. Only lines that are not `op.param = float` at all are preserved verbatim, which is the sidecar's version-skew promise made here too. Applying is the paste path with a different source, so a preset reaches a selection through the sidecar read-modify-write that was already there: no graph, no decode, no GPU, forty files or one. Two smaller decisions worth the record. A library that fails to parse is held empty in memory and *not* written back over — settings regenerate themselves and this is work, so a parse failure must not be the moment it is destroyed. And every save persists immediately and rolls the in-memory copy back if the write fails, so the sheet never lists a preset the file does not have. The grid's "Presets" button is gated on the selection alone, unlike the "Paste to 40" beside it. That button needs a clipboard armed this session; the preset list is whatever was saved last month, and hiding it behind an unrelated action is what makes a feature only its author knows about. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
574107bc39 |
Let a manual collection be put in the order it is meant to be seen in
`collection_members.position` and `Sort::CollectionPosition` have been in the catalog since collections were, and nothing above dr-catalog has ever written or read either: `collections::set_order` had no callers, and the grid ordered everything by capture time whatever it was scoped to — dr-ui does not construct a `Query` at all, it has its own `GRID_ORDER` constant. So a manual collection was a set with an order nobody could see or change. Three pieces, because it could not be fewer: `grid_order_for` decides the ordering from the scope, and both readers take it from there. That is the load-bearing part. An ordinal only names a photograph relative to an ordering, so the window read and the span read have to agree — a shift-click resolved through a different ORDER BY than the cells were drawn with selects a different run than the one on screen, and the user finds out when the export runs. `read_ids_span` already stated that invariant about `GRID_ORDER`; this widens it to an ordering that depends on the scope. Only a single manual collection has one. A set draws its descendants' images too, and two children's positions are unrelated integers that interleave arbitrarily; a smart collection has no member rows to carry a position at all. Both fall back to capture time and refuse the drop rather than pretending. The drop is on the cell, on whichever half of it the finger landed — the trailing edge is the only way to name the last place in a collection, since there is no cell beyond the last one to drop in front of. `reordered` is pure and the membership is rewritten whole. `set_order` sets the positions it is given and leaves the rest, so a partial write would interleave the moved run with rows nobody touched; and it is read unfiltered, so what the filter is hiding keeps its place relative to what the user can see. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
6d25d85f18 |
Make the range gesture visible, and offer the whole grid at once
Touch has had a range gesture for as long as selection mode has: double-tap the far end. It is invisible, it is unreliable on a grid that scrolls under the second tap, and it extends from the anchor *before* the two taps moved it — a rule subtle enough that the code needs two paragraphs to explain it to itself. Nobody who was not told about it has ever used it. "Select to…" is the same operation with state you can see. Press it, the strip stops reporting and says "Tap the last photograph", and the next cell taken is the far end. It reaches Rust as shift on `cell-pressed`, so it lands in `apply_press` as the ctrl+shift it already is, and there is no third selection policy to keep in step with the other two. This is deliberately not the sweep gesture. A drag that paints cells can only reach what is on screen, and the ranges that hurt on a tablet are longer than a screenful — between the two taps here the user may scroll as far as they like, and the run is resolved by the catalog rather than by what happened to be loaded. A sweep is still worth having for short runs; it is not what this should have rested on. "Select all" beside it, asked of the catalog for the same reason: a select-all that quietly meant "the hundred cells that happen to be loaded" is a lie the user cannot see until the export runs. The double-tap stays. It is tested, and an accelerator that costs nothing is worth keeping for whoever has already learnt it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
9ac1447139 |
Ask for the collection's name where the keyboard can reach it
"New collection from selection" created the collection under a placeholder name and then opened the rename field in the sidebar tree. On a tablet the sidebar is not on screen. It is instantiated all the same — app.slint collapses it to zero width and `visible: false` rather than using an `if`, because an `if` there is a layout loop Slint panics on — so the rename field was created, its `init` took focus, and Android raised the on-screen keyboard over a box nobody could see. Nothing else on the screen is focusable, so the keyboard had nowhere to go: it stayed, the name could not be typed, and the collection was already written under the name the user did not want. Asked in a sheet instead, on the same card as the filing and keywording sheets, before anything is written. That also fixes what was hiding behind it: an abandoned rename used to leave a "New collection" in the tree, because the collection existed before the name did. `Field` gains `take-focus()` so a sheet whose field is the only thing to do in it can answer the keyboard for the user — a function rather than a property, because focus is an event and a bound property would re-take it on every unrelated re-evaluation. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
5133e53bc8 |
Give back what a straighten took, when the angle comes back
Build and test / Desktop (Linux) (push) Successful in 2h16m6s
Build and test / Layer separation (push) Successful in 52s
🐳 Android image / Build and push (push) Successful in 4s
Build and test / android-image (push) Successful in 4s
Traceability / Requirement traces (push) Successful in 51s
Build and test / Android (aarch64) (push) Successful in 47m10s
The auto-crop only ever shrank. Straighten to 20 degrees and the corners are cropped away correctly; come back to 3, or all the way to zero, and the crop stays at the size 20 degrees demanded. Nothing on screen explains why the photograph is still small, and the only way back was undo. The cause was that each correction was computed from the previous correction's output, so it accumulated: every angle the slider rested at took its cut and none was ever returned. The fix is to stop accumulating and recompute. The applied crop is now always the user's own rectangle fitted into the current angle's safe area, so as the angle falls and that area opens up the crop grows back — and stops, exactly, at the rectangle they chose. At zero the safe area is the whole frame and the fit is the identity, which is what carries it the last of the way home. There is deliberately no early exit for the upright case now: that exit is precisely what would strand the crop small. **The intent is remembered as a pair, so it repairs itself.** The session keeps `(applied, intended)` — what the correction wrote, and what it was derived from — and trusts the remembered intent only while the graph still holds `applied`. Every other route to the crop leaves something else there: a handle dragged, a ratio chosen, a sidecar loaded, a paste, an undo. That mismatch is the signal the memory is stale, and the current rectangle becomes the new intent. The alternative was a write into this field from each of those paths, which is the kind of bookkeeping that is correct until someone adds a seventh path. Dragging a handle therefore *is* the user choosing, including at a non-zero angle: the correction will not later grow the crop past what they dragged it to. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
ff6c313bab |
Wrap the chip rows, so one six-choice parameter stops sizing the sidebar
The develop column asked for 482px. Every comment in it, a dozen of them, describes it as a 280px column — and on a tablet it was taking 40% of the screen from the photograph it exists to serve. Measured rather than guessed, because none of it is visible in the source: the column takes the widest width any panel declares, `AdjustPanel` wanted 482 of it, its rows wanted 458, and after the 44px scroll gutter the widest single row was 414. That row is `film_sim`'s `format` — six film formats from 35mm to 8x10, laid out by `Segmented` as six 64px chips in a `HorizontalLayout` that cannot wrap. 6 x 64 + 5 x 6 = 414, exactly. Nothing about that is the film simulation's fault. An operation declares its parameters and the panel decides how to draw them (FR-DEV-3a), so a node is entitled to offer six choices; it is the drawing that has to cope. Any future operation with a five-choice enum would have done the same thing, silently, to every screen in the application. `ChipGrid` is the general answer: chips placed by index arithmetic inside a plain `Rectangle`, wrapping at a column count, declaring a width that depends on the columns rather than on the number of choices. `Segmented` takes a `columns` property and uses it when asked — zero, one row however many chips, stays the settings page's behaviour, where the page is full-width and reading the alternatives side by side is the whole argument for chips over a dropdown. The generated enum rows and the curve-channel picker now wrap at three, and the crop ratio chips use the shared grid instead of the private copy of it they shipped with last week. The column measures 351 now, down from 482, and what sets it is the mode strip rather than a parameter — which is a control the user chose to have on screen rather than an accident of one node's variant list. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
bd33487054 |
Say which axis each export dimension is, in the one place that renders
The box modes put two numeric fields one above the other, and on screen they are two anonymous numbers: `TextRow` draws its label behind the field rather than above it, so "Width" and "Height" never appear. That fault is older than this feature — the storage panel's cache sizes have the same missing labels, and the single "Size value" row always did — and it belongs in its own change rather than being fixed under cover of this one. But one unlabelled number is survivable and two are not, so the axis goes where the page does render it: the unit. It reads "3840 px wide" above "2160 px high", which is the sentence the user is trying to write anyway. The `label` bindings stay correct and stay where they are, so this becomes redundant rather than wrong the day `TextRow` is fixed. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
c38df01bf7 |
Hang the auto-crop off the slider's commit, not off the pointer passing over
The straighten auto-crop worked once and then stopped. It was keyed on `PlainSlider::drag-changed`, whose name is a lie inherited from what it forwards: `SliderTrack` defines `engaged` as `has-hover || claimed`, and it has to — a `Flickable` withholds the press for 100ms, so hover is the only signal that arrives in time to stand the scrolling ancestor down. That is the right definition for the job it was written for and the wrong one for this. Keyed on hover, the correction fires when the pointer first crosses the track — before anything has been dragged — and then does not fire again for as long as the pointer stays on it, however many times the angle is changed. Which is exactly what "it only works once" looks like. `SliderTrack` already publishes the signal this wants. `committed` fires on release, once per gesture, after the final `changed`, and its doc comment says so in as many words. It was simply not forwarded through `PlainSlider`, so it now is, and the geometry panel's callback is a `committed(float)` rather than a `drag-changed(bool)`. The angle needs no re-applying here: the track emits its last `changed` before it commits, so the value is already in the graph by the time this runs. What is left is the correction that has to happen exactly once. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
2c8768ac29 |
Lay the ratio chips out by hand, because Slint will not lay them out
The ratio chips shipped inside a `GridLayout` with `row` and `col`
computed from the repeater's index. It compiles. On screen every chip
piles into a single row that runs off the panel, and the terminal fills
with
Internal error in Slint: RepeatedItemTree::grid_layout_input_data()
not implemented
once per frame. A `for` inside a `GridLayout` is not supported, and
nothing says so until it is running.
A `HorizontalLayout` is not the answer either: six chips side by side
need over 400px, and this column's width is the largest width any panel
declares — so one row would widen every other panel in the application to
fit a control that is on screen only while cropping.
So the grid is arithmetic over the index inside a plain `Rectangle`. It
costs the layout engine nothing, it wraps a seventh ratio onto a third
row by itself, and — because a bare `Rectangle` declares no preferred
width — it takes the width the column already has instead of setting it.
The Portrait chip gets a container of its own for the same reason: a
`ChoiceChip` dropped straight into a `VerticalLayout` is stretched the
full width of the panel and reads as a button for the section rather than
as one more chip.
The three conditional pieces are also now individually-conditional
children of the one layout rather than a nested layout under a single
`if`, which is the convention `app.slint` and `masks.slint` already carry
notes about: a conditional nested layout under-reports its height here
and the panels below it draw on top of one another.
All of this was invisible in the source and obvious in a screenshot.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
dtourolleandClaude Opus 5
|
52c655e6cf |
Turn the ratio lock with the photograph when it is turned
A quarter turn carries the crop with it — that is what makes turning a photograph keep its composition rather than sliding the selection onto a different part of the picture. So a rect locked to 16:9 comes out of the turn at 9:16, of a frame whose axes have also swapped, and the lock was left claiming landscape over a portrait rect. The next drag would then snap it back upright and undo what the turn had just done. The orientation switch now turns with it, on odd numbers of quarters. `Original` is deliberately excluded, and getting that wrong flips it twice: it is resolved against the framed size every time it is asked for, and the turn has already swapped that frame's axes — so it has turned by the time anything asks. `turns_with_the_frame` is the one predicate that separates the two cases, with a test that pins both. `CropAspect` arrived without tests of its own; it has them now, including the round trip this fixes. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
3bb68cff69 |
Export at an exact resolution, and offer the panels worth naming
Export sizing could bound an image but not fix it. Long edge, short edge and percentage all preserve the aspect ratio by letting one dimension fall where it may, which is right for most work and useless against a display that accepts one resolution and rejects everything else — a television's art mode, a digital frame, a wallpaper slot. FR-EXP-3 has always listed both halves of the answer, and this adds them. **Fit box** scales to fit inside a width and height, so nothing is thrown away and the result is smaller than the box on one axis unless the crop already matches it. **Fill box** scales to cover the box and cuts the overhang off the middle, so the file is exactly the pixels asked for. Fill is the only mode in the file that discards image data, so two things about it are worth stating. The overhang comes off symmetrically: the crop tool is where a photographer decides which part of a frame survives, and this stage having an opinion of its own would fight it. And locking the crop to the same ratio leaves nothing here to cut, which is the workflow the two features are meant to be used in. With upscaling off and a source too small to cover, a fill box keeps its *shape* rather than falling back to the source's: exporting a 3:2 file where 16:9 was asked for is silently wrong in exactly the way the mode exists to prevent, so the box shrinks instead. The existing rule — clamp, never fail — is otherwise unchanged. Four panel sizes are offered as buttons beside the fields. Getting 3840 x 2160 by typing four digits twice is a step at which the mistake is discovered after the upload rather than before it. They fill in the numbers and nothing else, in particular not the fit/fill choice: both are legitimate against a screen, and guessing would discard the edges of a photograph for a user who wanted them. The list is panels rather than platforms, because a screen has one exact pixel count for ever where "what a photo site wants" would rot in the file. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
d9eb8faffd |
Crop away the corners a straighten exposed, once the slider is let go
Turning a rectangle inside its own bounds exposes its corners: there is no source pixel out there, and the shader renders it black. Nothing in the render prevents that, deliberately — a free angle does not change the output size, which is what leaves the frame where the user put it while the slider moves. Correct during the drag; four black wedges on the finished photograph. Letting go of the slider now pulls the crop inside the area the angle leaves defined. `Framing::max_inscribed_crop` already computed that bound and had no caller; this is the caller its doc comment described. **Once, at the end of the gesture.** Applied per frame it would shrink the crop on every step of the slider and never grow it back, so a user who overshot to 20° and came back to 3° would be left with a crop ratcheted down by the excursion rather than by the angle they settled on. Per gesture it is bounded by the angles actually rested at, and undo steps back through them. **The crop is fitted into the bound, not replaced by it.** A crop placed deliberately off-centre is a decision, and an automatic correction that recentred it would undo the user's work to fix a problem they did not have. `CropRect::fitted_into` scales only as far as the bound demands and then slides the rect the shortest distance needed to be inside — so a ratio locked in the crop panel survives the straighten too, since the shape is never touched. It returns the rect unchanged, bit for bit, when nothing needed to move. That matters more than it looks: this runs on every release of the slider, including releases at zero, and a rect that drifted by a rounding error each time would be an edit recorded for no reason. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
e6ad906bc1 |
Let the crop be held to a ratio while it is dragged
A photographer cropping for a print, a phone wallpaper or a 16:9 frame is not choosing four edges — they are choosing one edge and a known shape. Free-dragging every corner made them do that arithmetic by eye on every drag, and get it slightly wrong. The panel now offers Free, Original, 1:1, 3:2, 4:3 and 16:9, with a Portrait switch for the ones that have two orientations. Original follows the frame rather than naming a number, so it stays right on the next photograph from another body and after a quarter turn. **The ratio is of output pixels, and the rect is not.** `CropRect` is stored in fractions of a frame that is not itself square, so holding a shape needs the frame's size — `ratio * height / width` of the frame. Skipping that gives a "1:1" crop that is square only on a square photograph, which is the one case nobody would test on, so the conversion lives in `CropRect::with_aspect` where it is explained and pinned by a test that asserts the fractions are *not* equal. Two decisions worth recording: The reshaped rect **grows** onto the ratio rather than shrinking onto it, then scales down only as far as the frame's edge demands. Fitting inside instead makes a one-axis drag do nothing at all — the other axis clamps the first straight back, and the handle simply refuses to move. The overlay now reports **which corner the drag is holding**, because reshaping onto a ratio has to know which corner is nailed down and only the handle that took the press knows that. A move reports no corner and keeps its shape: reshaping about a centre would pull an over-moved rect smaller instead of sliding it along the edge. The lock lives with the window rather than the session. A `DevelopSession` is per image, and cropping a set of frames to one shape is exactly when the lock earns its place. It is not an edit and reaches no sidecar — what is saved is the rectangle it produced. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
dbaf5358d1 |
Measure a crop drag against the frame, not against the rect it is moving
Dragging the crop rectangle tracked the pointer at half speed: the rect slid out from under the cursor, and the handle being held stopped being the one under the finger. On a photograph where the whole point is to place an edge by eye, that made the tool close to unusable. The cause is that a `TouchArea` reports `mouse-x` relative to itself, and every area in the overlay is positioned *by the very rect the drag is editing*. Rust echoes the applied rect back on each step, so the area moves under the pointer and the reported position falls by exactly the amount it had just risen. `mouse-x - pressed-x` therefore subtracts the drag from itself, and the fixed point of that feedback is a rect that moves half as far as the pointer does — which is why it looked like sluggish tracking rather than like a coordinate bug. Both terms are now taken in the frame's own coordinates: `parent.x + mouse-x`, where `parent.x` tracks precisely the movement `mouse-x` lost, with the press captured in those same coordinates on the way down. The two movements cancel and the rect follows the pointer exactly. `GradientHandles` in masks.slint was already written this way, and for the same reason — its handles are placed by the mask they drag. The header note here now says why the shape matters, since the wrong version compiles, looks plausible, and is only wrong once the rect starts moving. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
da20d42d33 |
Merge master: pluggable storage, and a name that anchors
Conflicts were docs/traceability.md alone, and it is generated — so it was regenerated rather than hand-merged. dr-face was untouched on the other side; ui/dr-ui/src/faces.rs and identity_ui.rs auto-merged, the first around recluster's anchoring and the second around load_faces. Worth recording because the two branches met on the same problem from different ends. Master's "Let a name hold a group together" is the fix for the sixteen Catherines — fourteen of them empty — that this branch found while measuring the library and reported without fixing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
ebb7d3cf5c |
Score a suggestion against the people the user has named
The number beside a suggestion was the mean calibrated probability between the face and the rest of its group, which measures the wrong thing twice. It punishes coverage: a person with two hundred faces over fifteen years is *meant* to have members a given photograph is orthogonal to, so a correct suggestion onto a well-photographed person scored low for being well photographed. And it never asked who else the face might be — a face matching Anna at 0.95 and nobody else, and one matching Anna at 0.95 and her sister at 0.93, came out identical, when the second is the only one worth the user's attention. dr_face::assign answers both, and multiplies them: the mean of the best ten calibrated matches into the identity (the old mean, capped, which is what stops coverage counting against it), times that identity's share of the evidence against every *named* rival. Only named people compete, and per person rather than per group. Both halves of that had to be measured on a real 18,000-face library rather than reasoned about. Normalising across every group made the number useless — median suggestion 21%, four in five under half — because clustering leaves one person spread over many groups, so a face competed against itself; and keying rivals by group left Catherine competing with Catherine, median 39%. Per named person: median 99.5%. Rivals are gathered below the merge threshold, down to even odds: a named person matching at 0.6 will never be merged into but is exactly the competition to discount for. That would be a second similarity scan, the expensive half of regrouping a library, so cluster_scored scans once at the looser floor and hands the merge engine the subset at or above the threshold — pair for pair what it would have scanned for itself, held to that by a test. Leave-one-out over that library's 2,702 confirmations across 54 named people: 99.33% of faces placed on the right person against the old mean's 99.15%, and the number shown for the right person moves from a median of 90.4% to 99.3%. It errs low — 100% correct wherever it states 80% or more — which is the safe direction, and docs/faces.md §9.1 says plainly that the low bands are not calibrated. The example that measures it comes too: this is a claim about a library's numbers, and nobody should have to take it on faith. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolle
|
21d599b420 |
Test the guard, since the bug was a branch nobody ran
Build and test / Desktop (Linux) (push) Successful in 2h5m41s
Build and test / Layer separation (push) Successful in 50s
🐳 Android image / Build and push (push) Successful in 2s
Build and test / android-image (push) Successful in 2s
Traceability / Requirement traces (push) Successful in 1m37s
Build and test / Android (aarch64) (push) Successful in 59m40s
The catalog clobber existed because `if let Ok(bytes)` had a failure arm that was never exercised. Fixing it without covering that arm leaves the next person free to collapse it back. Three tests against a backend whose read fails in a chosen way, counting writes — because what went wrong was not a wrong value but a write that should not have happened at all: - a dehydrated snapshot uploads nothing - an unreadable one uploads nothing either, since "refused" is no more "absent" than "not downloaded" is - and a genuine first sync still uploads, which is the half that keeps `NotFound` distinct from `NotMaterialised` rather than merely cautious Checked against the original shape: the first two fail on it and the third passes. A guard test that cannot tell the bug from the fix is decoration. `async-trait` joins dev-dependencies to stand the double up behind `dyn RemoteBackend`. |
||
|
dtourolle
|
4168d67cfa |
Do not push a catalog over one we could not read
`sync_catalog` is a read-modify-write over a file another device also
writes: take theirs, merge, push the union. It was shaped
if let Ok(bytes) = backend.get(&RemoteId::Path(target), None).await {
which folds *every* failure into "there is no remote catalog" and carries
straight on to the upload. On a placeholder library the snapshot in
`.darkroom-derived/` is dehydrated like anything else, so the read failed
every time and each sync pushed our catalog over theirs unmerged —
taking the other device's collections and their members with it.
The same shape as the sidecar bug, and the same fix: a read that fails
for anything other than `NotFound` stops the upload and says why. An
unreadable or unopenable snapshot stops it too — "will not parse" is not
"is not there". This is what `NotFound` and `NotMaterialised` being
separate errors is *for*: one means ours is the whole truth, the other
means do not dare.
Shard downloads go through the same fetch-on-demand read. They logged
and skipped before, which on a library the client keeps dehydrated is
every shard, every pass, and a peer's thumbnails and faces silently
never arriving.
And `put` over a placeholder now replaces it rather than refusing.
Refusing was over-cautious of me: derived state lives inside the library
folder, so a folder the client had dehydrated could never be written to
again. An unconditional write replaces the whole file, so there is
nothing in the stub to keep — content first, then the placeholder, since
in a synced tree an absence is a deletion that propagates. `IfMatch`
still refuses, because a stub's validator describes the stub; `IfAbsent`
fails, because the file is there and only its content is not.
|
||
|
dtourolle
|
5768100816 |
Borrow the library to index it, and give it back
The passes that need every photograph's bytes — thumbnails, face indexing — now borrow each one and release it at the end. On a placeholder library that is the difference between peak disk being the working set and being the whole library. Including on cancellation, which was nearly missed: the face sweep returns mid-loop when the user presses Stop, and without releasing there the disk is spent and nothing is delivered for it. `materialise` now answers whether *it* fetched the content. The pool used to work that out by listing a file's parent directory — one listing per file across a library — when the backend already had to `stat` it to decide whether to ask. One syscall instead of a directory walk, and it removes the bug class the tests found earlier: a file at the library root has no `parent()`, so every one of them read as already-downloaded. **Pinning is the retention control**, and it drives the model the catalog already had rather than a second one. `tier_desired` is what the user asked to keep hydrated, `pending_pins` is the resumable work list, and a pinned collection is never dehydrated for the same reason it was never evicted. It was in fact *broken* here before: `get` on a stub failed, and the pin worker logged "one unreadable file must not abandon the whole pin" and silently did nothing. Pinned originals on such a library are recorded with `path = NULL` (`Cache::record_in_place`) rather than copied under `originals/`. Two reasons, and the second is the important one. A copy would hold every pinned photograph twice, with the budget able to evict the half that was not costing the disk. And `release` deletes the file a row names — so a row that names none cannot delete anything, which puts the one catastrophic operation out of reach by construction rather than by remembering not to call it. Deleting a materialised file inside a synced tree removes the photograph from the server and every other device. Handing disk back is `spawn_dehydrate`, which asks the client. Two gaps written down rather than papered over (docs/storage.md §7): a hydrating pass cannot yet quote its cost, because a stub reports no size; and the two sweeps hold separate pools, so a library indexed for both fetches twice. |
||
|
dtourolle
|
c102ba9df2 |
Treat a placeholder as the photograph, not as a one-byte file
The folder connector was pointed at a Nextcloud VFS tree and got three things wrong, the first of which loses work. **A dehydrated sidecar read as absent.** `a.drsc` does not exist when the client has dehydrated it — only `a.drsc.nextcloud` does — so `get` missed, `.ok()` swallowed the `NotFound`, and the sidecar writer took that for "there is no sidecar yet" and wrote a fresh document over the existing one. Every edit another device had put there went with it. That function's own doc comment calls this the exact loss the format's unknown-key preservation exists to prevent. **A stub was catalogued as a 1-byte image**, and ARCH §9.0 measured this machine at 121,785 placeholders against 10,267 real files — so a folder library on a synced tree was ~92% broken rows. **Identity changed on hydration**, so downloading a photograph looked like a delete and an add, orphaning its thumbnail and its face rows. Entries now carry the photograph's own name and a `materialised` flag; `get` on a stub returns the new `RemoteError::NotMaterialised`, which is distinct from `NotFound` precisely because the sidecar writer must treat them differently — it fetches the sidecar and merges, or leaves the entry queued. Hydration is a **borrow**. `BorrowPool` records what was on disk before it asked, so `release_all` dehydrates only what a pass brought and leaves what the user already had. Reference counted: the thumbnail pass and the face pass meet on the same RAW, and without counting the first to finish dehydrates the file the second is reading. A borrow against a plain folder or a server does nothing, so a pass written for VFS runs everywhere. Releasing means asking the client to dehydrate and never deleting: a deletion inside a synced tree propagates to the server and removes the photograph from every device. Not a second backend — the capability is per *connection*, not per type, since the same folder hydrates only while the client runs. The convention arrives through a detector the registry supplies, so `dr-sync-folder` still knows nothing about any client's protocol. ARCH §9.0a records this as an amendment: finding 3 rejected hydration because it costs 100× a range read, and that comparison assumed a connector was available. A folder library has none. |
||
|
dtourolle
|
6c363cee97 |
Let the launch screen scroll, now that it offers three routes
The signed-out screen was a `VerticalLayout { alignment: center }` with
no scroll. That was already tight with two routes; the folder option
made the column taller than a 900x560 window, and a centred layout that
overflows clips at *both* ends — so the masthead and the last route
disappear together, with nothing on screen to suggest either existed.
A Flickable whose viewport follows the content, and a top padding that
centres the column only while it fits. Both cases checked against the
running app: centred at 1000x1800, top-aligned and scrollable at
900x560.
|
||
|
dtourolle
|
64462e9fd3 |
Test the folder sign-in instead of trusting it
The whole of a folder library's sign-in lived inside a Slint callback, which cannot run without a display server — so the one path that decides whether a mistyped folder becomes a *stored* account had no test at all. That failure is quiet and lasting: an account for a directory that is not there skips the launch screen on the next start and reads as a library that has lost its photographs. `open_folder_library` is that logic, lifted out whole. Four tests: it stores an account with no credential and reaches the keyring for nothing, a typo is refused before anything is written, the messages read as instructions because they go straight to the screen's error line, and a file is not a library. |
||
|
dtourolle
|
f12aece07e |
Make storage pluggable, and prove it with a folder backend
`RemoteBackend` existed from the first release and bought nothing it was
designed for. Seven files in `dr-ui` constructed a `NextcloudBackend`
directly, an account *was* a server URL beside a DAV user id, the local
cache directory was named after a hostname, and the launch screen knew
that signing in meant a browser handshake. The trait was real; the seam
was documentation.
A trait over operations is only a quarter of it. Pluggable storage needs
four things, and this adds the other three:
- **Capabilities** — already there, and the reason the engine can drive
two backends at the speed each actually runs at.
- **Configuration** — `dr_sync::Account`: where a library lives, in
whatever form its connector addresses, with no server in it. Loads
every existing config unchanged (`backend` defaults to `nextcloud`,
`endpoint` is stored under its historical `server` key), and
`Account::namespace()` reproduces the old catalog directory byte for
byte, because changing it would abandon a catalog, its thumbnail
shards, and the sidecars holding unsynced offline work.
- **Registration** — `BackendProvider` and `BackendRegistry`.
`ui/dr-ui/src/remote.rs` is now the only file above `dr-sync` that
names a connector.
`Connection` (an account plus an optional `Secret`) replaces the
credentials-and-user-id pair that was threaded through fifteen
signatures in an order that could be swapped. `Secret`'s inner string is
reachable only through `expose()` and its `Debug` prints `Secret(***)`,
so the indirect leak — a `{:?}` on anything holding one — no longer
compiles into a leak.
Nextcloud is unchanged and keeps every peculiarity: propagating ETags,
chunked upload v2, `oc:fileid`, the `oc:permissions` probe on a refused
PUT, the 423 retry classification, Login Flow v2. Those are what the
capability model exists to serve, not something to hide.
`dr-sync-folder` is the second connector: a local disk, a network mount,
an external drive, or a folder a Nextcloud client already syncs. No
account, no credential — the route that works where no secrets daemon
does. It declares `LocalEtags` rather than claiming propagation a POSIX
directory cannot provide, which costs nothing because 50k `stat` calls
are not 50k PROPFINDs. Identity is a path hash, not an inode: an inode
survives a rename but differs between devices and is reused after a
delete, so two machines would disagree about which photograph a
thumbnail belonged to. Re-deriving a thumbnail is a cost; showing the
wrong one is a bug.
docs/storage.md is the contract — the traits, the four steps to add a
backend, and what each connector declares. ARCH §8.0 and §8.4a, and
FR-NC-13, say why.
|
||
|
dtourolleandClaude Opus 5
|
c8e05831f4 |
Show the confidence, and say which curve it came from
FR-CULL-9 was read as "no fit, no number", so every library without 200 confirmed positive pairs showed "Confidence unavailable" on every suggestion — which is every library, until enough confirmations exist to fit one. The confirmations are made on this screen, ranked by the number it was withholding, so the degraded state was also the permanent one. There has always been a curve: Calibration::default is the reference implementation's fitted MBF sigmoid, which is what clustering already operates at. It is a published operating point, not an invention, and what the requirement forbids is presenting it *as though it were measured on this library*. So the percentage is shown, and the screen says once, above the grid, where the curve came from. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
1b8b7998a2 |
Let a name hold a group together, the way a confirmation does
Build and test / Desktop (Linux) (push) Successful in 2h6m43s
Build and test / Layer separation (push) Successful in 46s
🐳 Android image / Build and push (push) Successful in 1s
Build and test / android-image (push) Successful in 2s
Traceability / Requirement traces (push) Successful in 29s
Build and test / Android (aarch64) (push) Successful in 21m27s
Sixteen people called Catherine, fourteen of them holding no faces at all, and her actual photographs split across the two that did. That is not a sync fault; it is this function, and it has been quietly doing it on every Regroup. Naming a cluster does not confirm its faces. They stay *suggestions* — and only confirmed faces anchored here, so the next pass cut them loose, regrouped them into a brand new person, and left the named one holding nothing. `prune_empty_unnamed` will not clean that up, because it has a name. Name the new group the same thing, and it happens again. Repeat over a few sessions and you have sixteen of her. A name is a judgement about *this group*, of exactly the kind FR-CULL-12 says travels and inference does not — the same argument that already anchors a group the user set aside. So all three kinds of ruling anchor now: confirmed, ignored, and named. It also fixes the quieter half of the same fault. A face indexed later that matches a named person now merges *into* them, rather than arriving as a rival group the user has to name all over again. Two tests, and the first fails without the change — it reports "Catherine" finishing the pass with zero faces while a fresh unnamed person holds the two she was named for. This does not retro-fit an existing library: the fourteen empty Catherines stay until they are merged by hand, and the two holding faces are separate identities that only the user can say are one person. What it stops is making more. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
2fb3eb5d2d |
Upload a shard that was sealed after the server saw it
Build and test / Desktop (Linux) (push) Successful in 2h7m52s
Build and test / Layer separation (push) Successful in 57s
🐳 Android image / Build and push (push) Successful in 12s
Build and test / android-image (push) Successful in 13s
Traceability / Requirement traces (push) Successful in 57s
Build and test / Android (aarch64) (push) Successful in 20m58s
The tablet showed 442 of a person's 648 faces and could never catch up. Its shard ledger said why: it had adopted the laptop's shard 0 at 2,711,552 bytes, and that shard is 20,402,176 bytes on disk. The upload skipped it. A sealed shard the server already had under that name was taken to be "byte-identical by construction", so its mere presence was proof enough and the size was never consulted. That premise is false, and this library is the counter-example: an *open* shard is uploaded on every pass as it fills — that is how a growing shard reaches the other devices — so the server ordinarily holds a partial copy of a shard that is later completed and sealed. Sealing then froze that partial copy in place for ever. Nothing downstream could recover from it. The tablet's `has_adopted` check is keyed on name *and* size and would have re-downloaded a changed shard gladly; it was never offered one, because the sending side had stopped looking. So the comparison is on size, sealed or not. The client id is in the name, so nobody else can have written the file and size is a sound test. A sealed shard whose size already matches is still skipped on the first comparison, which is all the original cheapness was worth. The thumbnail upload had the identical test and the identical hole, and is fixed with it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
d70fe9da8d |
Decide whether to send a shard before reading it
The upload read every shard off disk and only then asked whether it needed sending. For a library with 94 MB of face shards already on the server, every idle sync read 94 MB to conclude it had nothing to do. The question does not need the bytes. A sealed shard the server already has is byte-identical by construction, and the client id is in the name, so nobody else could have written it — the name settles it. The open shard is compared on size, which `stat` answers. The progress line moves after the skip for the same reason: announced before it, an idle pass claimed to be sending five shards and sent none. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
a1e8f494b9 |
Say what the face sync is doing while it does it
The face pass set the status to "checking faces…" once and then said nothing until it was finished. On a library whose first export after a re-index is 9,849 photographs and 85 MB of shards, that is eight minutes of a progress bar sitting still — which is indistinguishable from a hang, and was reported as one twice. Nothing was wrong with the sync. The only fault was that it was silent. Three places now report, which are the three that take real time: - **Preparing**, per image with a count, since this is the long one and the only one whose length the user cannot guess from anything on screen. - **Sending**, per shard with its size, because a face shard carries crops and runs to tens of megabytes — one of them is a visible wait on any connection. Announced before the upload rather than after, since the wait *is* the upload. - **Taking in** a peer's shard, which is a download and then a row-by-row merge. The export reports every 25 images rather than every one, so the channel behind it stays lost in the write it accompanies. `export_to_shards` keeps its old signature and delegates, so the callers that do not want progress do not grow a parameter for it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |