|
|
@@ -308,7 +308,7 @@ Internal architecture, components, and application logic.
|
|
|
|
| DR-131 | The offline mutation queue is drained. `sync_queue` had producers and no consumer: `PlaybackReporter::queue_for_sync` writes a row for every start/stop/mark-played that cannot reach the server, `sync_mark_processing`/`_completed`/`_failed` were registered commands with no callers, and no Rust task processed the table — so queued watch positions never reached Jellyfin and the offline banner's count only ever grew. A drain hangs off the same `connectivity:reconnected` transition as DR-120 (in Rust, because a drain started by a component dies with it) and replays rows oldest-first, so a stale start cannot move the server's resume position backwards after a later stop. `update_progress` replays as *stopped at N* rather than as progress — replaying a mid-playback report hours later would claim the item is still playing — and payloads are read in both dialects that exist in users' databases (`position_ticks` from Rust, camelCase `positionMs` from the frontend helper). A failed row stays queued for the next reconnect; after `MAX_SYNC_ATTEMPTS` it is `abandoned` and stops counting, because a row nothing can ever push is what turns the queue into a counter that only grows. An *unreachable* server is not counted as an attempt at all — the row goes back to `pending` untouched — so opening the app offline a few times cannot abandon good rows; only a server that answers and refuses spends the budget. The drain also runs once at startup, because a queue built in a previous session would otherwise sit untouched for a whole run whenever the server was reachable the entire time and no offline→online transition ever fired. Requires `MediaRepository::mark_played` (JA-035) — the previous stand-in reported a stop at `i64::MAX` | Backend | UR-025, UR-002 | Done |
|
|
|
|
| DR-131 | The offline mutation queue is drained. `sync_queue` had producers and no consumer: `PlaybackReporter::queue_for_sync` writes a row for every start/stop/mark-played that cannot reach the server, `sync_mark_processing`/`_completed`/`_failed` were registered commands with no callers, and no Rust task processed the table — so queued watch positions never reached Jellyfin and the offline banner's count only ever grew. A drain hangs off the same `connectivity:reconnected` transition as DR-120 (in Rust, because a drain started by a component dies with it) and replays rows oldest-first, so a stale start cannot move the server's resume position backwards after a later stop. `update_progress` replays as *stopped at N* rather than as progress — replaying a mid-playback report hours later would claim the item is still playing — and payloads are read in both dialects that exist in users' databases (`position_ticks` from Rust, camelCase `positionMs` from the frontend helper). A failed row stays queued for the next reconnect; after `MAX_SYNC_ATTEMPTS` it is `abandoned` and stops counting, because a row nothing can ever push is what turns the queue into a counter that only grows. An *unreachable* server is not counted as an attempt at all — the row goes back to `pending` untouched — so opening the app offline a few times cannot abandon good rows; only a server that answers and refuses spends the budget. The drain also runs once at startup, because a queue built in a previous session would otherwise sit untouched for a whole run whenever the server was reachable the entire time and no offline→online transition ever fired. Requires `MediaRepository::mark_played` (JA-035) — the previous stand-in reported a stop at `i64::MAX` | Backend | UR-025, UR-002 | Done |
|
|
|
|
| DR-132 | The pending-sync count is answerable. The offline banner's badge read "N pending sync(s)" and led nowhere, so it was taken for pending *transfers* and looked for on the Downloads page — which lists the `downloads` table and structurally cannot show `sync_queue` rows. The badge becomes a button opening the queue it counts: each row's operation, the item's title (resolved by a `LEFT JOIN items` in `sync_get_pending`, not a per-row frontend fetch), when it was queued, and the error of anything failing, plus a "Sync now" that runs the DR-131 drain on demand. The same list is a Settings section, because a row that keeps failing is still queued when the server is reachable and no banner is on screen. The drain emits `sync-queue-changed` so the badge updates on reconnect instead of lagging by up to one 10s poll | UI | UR-025 | Done |
|
|
|
|
| DR-132 | The pending-sync count is answerable. The offline banner's badge read "N pending sync(s)" and led nowhere, so it was taken for pending *transfers* and looked for on the Downloads page — which lists the `downloads` table and structurally cannot show `sync_queue` rows. The badge becomes a button opening the queue it counts: each row's operation, the item's title (resolved by a `LEFT JOIN items` in `sync_get_pending`, not a per-row frontend fetch), when it was queued, and the error of anything failing, plus a "Sync now" that runs the DR-131 drain on demand. The same list is a Settings section, because a row that keeps failing is still queued when the server is reachable and no banner is on screen. The drain emits `sync-queue-changed` so the badge updates on reconnect instead of lagging by up to one 10s poll | UI | UR-025 | Done |
|
|
|
|
| DR-133 | A downloaded file has exactly one on-disk path, and the row that names it is authoritative. `downloads.file_path` starts relative to the storage root, but the worker rewrites it to the absolute path it actually wrote when the transfer completes — so a *completed* row is already rooted. The video player's offline branch rooted it a second time, handing the asset protocol `/data/user/0/app//data/user/0/app/videos/x.mp4`; the webview reported `MEDIA_ERR_SRC_NOT_SUPPORTED` with `NETWORK_NO_SOURCE`, so every downloaded video failed to play while audio — which resolves the same column through Rust's `resolve_local_media_path`, without re-rooting — played fine. The join is absolute-aware (POSIX, Windows drive letters and UNC) so rows written before completion still resolve | Playback | UR-071 | Done |
|
|
|
|
| DR-133 | A downloaded file has exactly one on-disk path, and the row that names it is authoritative. `downloads.file_path` starts relative to the storage root, but the worker rewrites it to the absolute path it actually wrote when the transfer completes — so a *completed* row is already rooted. The video player's offline branch rooted it a second time, handing the asset protocol `/data/user/0/app//data/user/0/app/videos/x.mp4`; the webview reported `MEDIA_ERR_SRC_NOT_SUPPORTED` with `NETWORK_NO_SOURCE`, so every downloaded video failed to play while audio — which resolves the same column through Rust's `resolve_local_media_path`, without re-rooting — played fine. The join is absolute-aware (POSIX, Windows drive letters and UNC) so rows written before completion still resolve | Playback | UR-071 | Done |
|
|
|
|
| DR-134 | The webview can actually fetch the local files it is handed. `convertFileSrc` rewrites a path to `http://asset.localhost/…` unconditionally, but Tauri only answers that origin when the `protocol-asset` cargo feature is compiled in *and* `app.security.assetProtocol.enable` is set — neither was, so every such URL reached a protocol with no handler and the webview reported `NETWORK_NO_SOURCE`. This silently defeated both offline video (`<video src>`) and the cached-thumbnail path in `imageCache`, which fails soft to the server copy and so hid the breakage whenever the server was reachable. The scope is `$APPDATA/**` — the storage root under which the database, `downloads/` and the thumbnail cache all live — rather than an unrestricted grant, so the webview can read the app's own media and nothing else | Security | UR-071 | Done |
|
|
|
|
| DR-134 | The webview can actually fetch the local files it is handed. `convertFileSrc` rewrites a path to `http://asset.localhost/…` unconditionally, but Tauri only answers that origin when the `protocol-asset` cargo feature is compiled in *and* `app.security.assetProtocol.enable` is set — neither was, so every such URL reached a protocol with no handler and the webview reported `NETWORK_NO_SOURCE`. This silently defeated both offline video (`<video src>`) and the cached-thumbnail path in `imageCache`, which fails soft to the server copy and so hid the breakage whenever the server was reachable. The scope was `$APPDATA/**` — the storage root under which the database, `downloads/` and the thumbnail cache all live — rather than an unrestricted grant; DR-198 narrows it further to `$APPDATA/thumbnails/**`, since DR-137 moved downloaded media off this protocol and thumbnails are all it still serves | Security | UR-071 | Done |
|
|
|
|
| DR-140 | An audio track is pinned only when the user picked one. Jellyfin's `MediaStream.Index` is global across every stream in a media source, so index 0 is the *video* stream on virtually all files — yet `AudioStreamIndex=0` was sent as "the first audio track" on the HLS transcode URL, the background audio-only handoff URL, the direct-play fallback URL, and the `PlaybackInfo` negotiation body. A server that honours the request literally then transcodes the video stream into the audio slot and the result plays as a picture with no sound; only servers that silently correct the index hid the bug, which is why it presented as "some videos have no audio". The parameter is now omitted whenever no track has been chosen, so the server resolves the source's `DefaultAudioStreamIndex`; an explicit selection from `player_switch_audio_track` is still carried through unchanged. On the `static=true` direct-play URL it is dropped outright — the original file is served untouched, so the parameter could only mislead | Playback | UR-004, UR-040 | Done |
|
|
|
|
| DR-140 | An audio track is pinned only when the user picked one. Jellyfin's `MediaStream.Index` is global across every stream in a media source, so index 0 is the *video* stream on virtually all files — yet `AudioStreamIndex=0` was sent as "the first audio track" on the HLS transcode URL, the background audio-only handoff URL, the direct-play fallback URL, and the `PlaybackInfo` negotiation body. A server that honours the request literally then transcodes the video stream into the audio slot and the result plays as a picture with no sound; only servers that silently correct the index hid the bug, which is why it presented as "some videos have no audio". The parameter is now omitted whenever no track has been chosen, so the server resolves the source's `DefaultAudioStreamIndex`; an explicit selection from `player_switch_audio_track` is still carried through unchanged. On the `static=true` direct-play URL it is dropped outright — the original file is served untouched, so the parameter could only mislead | Playback | UR-004, UR-040 | Done |
|
|
|
|
| DR-147 | One search input per screen, and the URL is the search's single source of truth. The header bar rendered only under `/library/**` and merely *navigated* to `/search` (DR-063), so a desktop search handed the user to a screen whose input was a different element — the header box cleared itself and vanished, and the page's own box took over mid-word. That page then re-derived its input from `?q=` against `library.searchQuery` on every store write, so the next keystroke re-ran the effect and snapped the text back to the query the header had sent (and a scope chip back to the URL's scope); entering from the bottom-nav Search tab skipped it only because the effect early-returned on an empty query. The bar now renders on `/search` too (`showHeaderSearch`) and is the sole md+ input — the page's own input is `md:hidden` — and on that route it republishes the query into the URL with `replaceState`, so a whole session of typing costs one history entry. The page *consumes* that URL once per distinct value (`seedFromSearchUrl` against a non-reactive `applied` marker) instead of continuously reconciling it, and the scope chips publish through the same URL so the bar and the chips cannot disagree. Landing on `/search` with a seeded query focuses the bar and puts the caret at the end, because the box the user was typing in belonged to the unmounted route | UI | UR-049, UR-054 | Done |
|
|
|
|
| DR-147 | One search input per screen, and the URL is the search's single source of truth. The header bar rendered only under `/library/**` and merely *navigated* to `/search` (DR-063), so a desktop search handed the user to a screen whose input was a different element — the header box cleared itself and vanished, and the page's own box took over mid-word. That page then re-derived its input from `?q=` against `library.searchQuery` on every store write, so the next keystroke re-ran the effect and snapped the text back to the query the header had sent (and a scope chip back to the URL's scope); entering from the bottom-nav Search tab skipped it only because the effect early-returned on an empty query. The bar now renders on `/search` too (`showHeaderSearch`) and is the sole md+ input — the page's own input is `md:hidden` — and on that route it republishes the query into the URL with `replaceState`, so a whole session of typing costs one history entry. The page *consumes* that URL once per distinct value (`seedFromSearchUrl` against a non-reactive `applied` marker) instead of continuously reconciling it, and the scope chips publish through the same URL so the bar and the chips cannot disagree. Landing on `/search` with a seeded query focuses the bar and puts the caret at the end, because the box the user was typing in belonged to the unmounted route | UI | UR-049, UR-054 | Done |
|
|
|
|
| DR-142 | An episode has exactly **one** surface, and it is complete. Two divergent renderings existed: `EpisodeFocusView` (reached from Continue Watching, the series episode list, the TV landing page and Downloads — i.e. every real entry point) offered only Play and Favourite, while the bare `/library/<episodeId>` page nobody routed to carried the download button, the series/season breadcrumbs and the cast section. Opening an episode the normal way therefore silently lost the ability to download it. The Focus View is now the single surface and carries the full §5B.2 composition — hero action row `Play / Download / Favourite`, series name and `SxEy` badge as links back to the series and to that season's anchor, then genres → cast → similar shows *below* the episode strip, never above it (DR-062). `/library/<episodeId>` redirects into it (`episodeRedirectTarget`, the same rule seasons follow under DR-103), and an episode with no `seriesId` renders the same component series-less rather than falling back to a second, lesser page. The focused episode is fetched in full rather than reused from the season fan-out, because that is a *list* query and carries neither cast nor genres — the sections would have rendered empty. The strip hides itself when the episode has no siblings, a card that only shows the episode you are already on being noise | UI | UR-048, UR-058 | Done |
|
|
|
|
| DR-142 | An episode has exactly **one** surface, and it is complete. Two divergent renderings existed: `EpisodeFocusView` (reached from Continue Watching, the series episode list, the TV landing page and Downloads — i.e. every real entry point) offered only Play and Favourite, while the bare `/library/<episodeId>` page nobody routed to carried the download button, the series/season breadcrumbs and the cast section. Opening an episode the normal way therefore silently lost the ability to download it. The Focus View is now the single surface and carries the full §5B.2 composition — hero action row `Play / Download / Favourite`, series name and `SxEy` badge as links back to the series and to that season's anchor, then genres → cast → similar shows *below* the episode strip, never above it (DR-062). `/library/<episodeId>` redirects into it (`episodeRedirectTarget`, the same rule seasons follow under DR-103), and an episode with no `seriesId` renders the same component series-less rather than falling back to a second, lesser page. The focused episode is fetched in full rather than reused from the season fan-out, because that is a *list* query and carries neither cast nor genres — the sections would have rendered empty. The strip hides itself when the episode has no siblings, a card that only shows the episode you are already on being noise | UI | UR-048, UR-058 | Done |
|
|
|
@@ -366,6 +366,7 @@ Internal architecture, components, and application logic.
|
|
|
|
| DR-137 | Local media is served to the player over a loopback HTTP server, not the asset protocol. Tauri's `asset` protocol answers a request carrying no `Range` header by reading the whole file into memory, and only advertises `Accept-Ranges: bytes` from *inside* its range branch — so the first request never learns ranges exist and a multi-gigabyte body is attempted instead. Chromium abandoned it with `PIPELINE_ERROR_READ` after ~31s, which reached the user as "downloaded video does not play offline". Real HTTP on `127.0.0.1` is chosen over a custom URI scheme deliberately: range support becomes a property of the transport rather than depending on whether a platform's webview forwards `Range` to a custom scheme. No response ever exceeds a 4 MiB chunk and bodies stream from the file handle, so memory is bounded regardless of file size. Because **loopback is shared between apps on Android**, the server binds `127.0.0.1` only and every URL carries a random per-session token; paths are additionally confined to the app data directory, so a leaked URL cannot read outside it. This is stage 1 of making the server the single media origin — remote passthrough and download-while-watching are deliberately out of scope here | Playback | UR-071 | Done |
|
|
|
|
| DR-137 | Local media is served to the player over a loopback HTTP server, not the asset protocol. Tauri's `asset` protocol answers a request carrying no `Range` header by reading the whole file into memory, and only advertises `Accept-Ranges: bytes` from *inside* its range branch — so the first request never learns ranges exist and a multi-gigabyte body is attempted instead. Chromium abandoned it with `PIPELINE_ERROR_READ` after ~31s, which reached the user as "downloaded video does not play offline". Real HTTP on `127.0.0.1` is chosen over a custom URI scheme deliberately: range support becomes a property of the transport rather than depending on whether a platform's webview forwards `Range` to a custom scheme. No response ever exceeds a 4 MiB chunk and bodies stream from the file handle, so memory is bounded regardless of file size. Because **loopback is shared between apps on Android**, the server binds `127.0.0.1` only and every URL carries a random per-session token; paths are additionally confined to the app data directory, so a leaked URL cannot read outside it. This is stage 1 of making the server the single media origin — remote passthrough and download-while-watching are deliberately out of scope here | Playback | UR-071 | Done |
|
|
|
|
| DR-138 | Loopback is exempted from Android's cleartext ban, and nothing else is. Release builds set `usesCleartextTraffic="false"`, so the webview's request to the local media server (DR-137) was rejected by network security policy before any I/O — `<video>` failed in the same millisecond as `loadstart`, with `NETWORK_NO_SOURCE` and no server-side log at all, which is why it looked identical to a missing file. A `network-security-config` resource permits cleartext for `127.0.0.1` only and keeps `base-config cleartextTrafficPermitted="false"`, so a remote server must still be HTTPS; this is deliberately not a blanket opt-in. The manifest attribute is ignored once the config is present, so the config is the single authority. `sync-android-sources.sh` also had to learn to copy `res/xml`, which it skipped — the manifest references the resource, so a missed copy fails the resource link rather than degrading quietly | Security | UR-071 | Done |
|
|
|
|
| DR-138 | Loopback is exempted from Android's cleartext ban, and nothing else is. Release builds set `usesCleartextTraffic="false"`, so the webview's request to the local media server (DR-137) was rejected by network security policy before any I/O — `<video>` failed in the same millisecond as `loadstart`, with `NETWORK_NO_SOURCE` and no server-side log at all, which is why it looked identical to a missing file. A `network-security-config` resource permits cleartext for `127.0.0.1` only and keeps `base-config cleartextTrafficPermitted="false"`, so a remote server must still be HTTPS; this is deliberately not a blanket opt-in. The manifest attribute is ignored once the config is present, so the config is the single authority. `sync-android-sources.sh` also had to learn to copy `res/xml`, which it skipped — the manifest references the resource, so a missed copy fails the resource link rather than degrading quietly | Security | UR-071 | Done |
|
|
|
|
| DR-093 | Traceability coverage gate derives its requirement denominators from `requirements.md` at run time rather than hardcoded literals: `countDefinedRequirements` counts an ID only where it leads a markdown table row (ignoring the "Traces To" column and prose) and deduplicates IDs listed both in the definition tables and in the §3 traceability matrix; `computeCoverage` reports the *intersection* of traced and defined IDs so an ID traced in code but absent from `requirements.md` is surfaced as `orphaned` instead of inflating the ratio past 100%. UT/IT test identifiers are excluded as a separate taxonomy. CI and `bun run traces:coverage` share this computation and fail on both a sub-threshold and an impossible >100% result | Tooling | - | Done |
|
|
|
|
| DR-093 | Traceability coverage gate derives its requirement denominators from `requirements.md` at run time rather than hardcoded literals: `countDefinedRequirements` counts an ID only where it leads a markdown table row (ignoring the "Traces To" column and prose) and deduplicates IDs listed both in the definition tables and in the §3 traceability matrix; `computeCoverage` reports the *intersection* of traced and defined IDs so an ID traced in code but absent from `requirements.md` is surfaced as `orphaned` instead of inflating the ratio past 100%. UT/IT test identifiers are excluded as a separate taxonomy. CI and `bun run traces:coverage` share this computation and fail on both a sub-threshold and an impossible >100% result | Tooling | - | Done |
|
|
|
|
|
|
|
|
| DR-198 | The webview runs under a real Content-Security-Policy, and the asset protocol is scoped to the one directory it still serves. `csp` was `null`, which disables CSP entirely: any script that reached the web layer — through a future `{@html}`, a dependency, or a devtools paste — would have inherited the whole IPC surface, and with it the user's session. `script-src 'self'` (Tauri injects a nonce for SvelteKit's inline bootstrap script at build time, so no `'unsafe-inline'` is needed) plus `object-src`/`frame-src 'none'` and `base-uri 'self'` is the part that is genuinely restrictive. `img-src`/`media-src`/`connect-src` cannot be: the Jellyfin origin is typed in by the user at run time and is commonly plain `http` on a LAN, so they allow `http:`/`https:` — a wide grant for *data*, but one that still bars `file:`, `filesystem:` and scripting schemes, and leaves `script-src` untouched. `style-src` keeps `'unsafe-inline'` because Svelte compiles `style="…"` attributes (including `app.html`'s `display: contents` wrapper) into markup; this is safe only while no `<style>` element survives into `index.html`, since a nonce there would make Tauri's injection outrank — and therefore void — `'unsafe-inline'`. `worker-src blob:` and `media-src blob:` are hls.js: it demuxes in a worker built from a blob and attaches MSE through `URL.createObjectURL`. `asset:` and `http://asset.localhost` are the same protocol under the two naming schemes `convertFileSrc` emits (custom scheme on Linux/macOS, `http` host on Windows/Android); `ipc:`/`http://ipc.localhost` is the invoke transport, which would otherwise be blocked by `connect-src`. A run-time CSP naming the server origin exactly was rejected: Tauri computes the header from immutable config when it serves the HTML, so it would mean rebuilding config and reloading the webview on every server change, for a policy the user can already point anywhere. The asset-protocol scope narrows from `$APPDATA/**` to `$APPDATA/thumbnails/**` — since DR-137 moved downloaded media to the loopback server, `imageCache` is the only `convertFileSrc` caller left, so the database and the encrypted-token fallback file no longer sit inside the grant | Security | UR-012, UR-071 | Done |
|
|
|
|
|
|
|
|
|
|
|
|
---
|
|
|
|
---
|
|
|
|
|
|
|
|
|
|
|
@@ -386,7 +387,7 @@ Internal architecture, components, and application logic.
|
|
|
|
| UR-009 | IR-009, IR-010, IR-011 | - |
|
|
|
|
| UR-009 | IR-009, IR-010, IR-011 | - |
|
|
|
|
| UR-010 | IR-012, IR-021 | DR-037, DR-059 |
|
|
|
|
| UR-010 | IR-012, IR-021 | DR-037, DR-059 |
|
|
|
|
| UR-011 | IR-013 | DR-003, DR-015, DR-018 |
|
|
|
|
| UR-011 | IR-013 | DR-003, DR-015, DR-018 |
|
|
|
|
| UR-012 | IR-009, IR-014 | - |
|
|
|
|
| UR-012 | IR-009, IR-014 | DR-198 |
|
|
|
|
| UR-013 | IR-013 | DR-017 |
|
|
|
|
| UR-013 | IR-013 | DR-017 |
|
|
|
|
| UR-014 | IR-010 | DR-014, DR-019 |
|
|
|
|
| UR-014 | IR-010 | DR-014, DR-019 |
|
|
|
|
| UR-015 | - | DR-005, DR-020 |
|
|
|
|
| UR-015 | - | DR-005, DR-020 |
|
|
|
@@ -444,7 +445,7 @@ Internal architecture, components, and application logic.
|
|
|
|
| UR-068 | - | DR-119 |
|
|
|
|
| UR-068 | - | DR-119 |
|
|
|
|
| UR-069 | - | DR-113, DR-114, DR-120 |
|
|
|
|
| UR-069 | - | DR-113, DR-114, DR-120 |
|
|
|
|
| UR-070 | - | DR-121, DR-122 |
|
|
|
|
| UR-070 | - | DR-121, DR-122 |
|
|
|
|
| UR-071 | IR-032 | DR-123, DR-124, DR-125, DR-126, DR-127, DR-128, DR-133, DR-134, DR-135, DR-136, DR-137, DR-138, DR-170, DR-171, DR-180 |
|
|
|
|
| UR-071 | IR-032 | DR-123, DR-124, DR-125, DR-126, DR-127, DR-128, DR-133, DR-134, DR-135, DR-136, DR-137, DR-138, DR-170, DR-171, DR-180, DR-198 |
|
|
|
|
| UR-072 | - | DR-156 |
|
|
|
|
| UR-072 | - | DR-156 |
|
|
|
|
| UR-073 | - | DR-158 |
|
|
|
|
| UR-073 | - | DR-158 |
|
|
|
|
| UR-074 | - | DR-162, DR-177, DR-181 |
|
|
|
|
| UR-074 | - | DR-162, DR-177, DR-181 |
|
|
|
@@ -643,6 +644,7 @@ Internal architecture, components, and application logic.
|
|
|
|
| UT-190 | `build_next_up_endpoint` sends `EnableResumable=false` with the user and limit, and no `SeriesId` filter when none was requested | DR-197, JA-036 | Done |
|
|
|
|
| UT-190 | `build_next_up_endpoint` sends `EnableResumable=false` with the user and limit, and no `SeriesId` filter when none was requested | DR-197, JA-036 | Done |
|
|
|
|
| UT-191 | A per-series next-up query keeps `SeriesId` and the resumable exclusion, and defaults the limit | DR-197 | Done |
|
|
|
|
| UT-191 | A per-series next-up query keeps `SeriesId` and the resumable exclusion, and defaults the limit | DR-197 | Done |
|
|
|
|
| UT-192 | `filterInProgressNextUpItems` drops an episode present in the resume list, keeps the genuinely unstarted next episode, leaves the rest of the row intact, and is a no-op when nothing is in progress | DR-197 | Done |
|
|
|
|
| UT-192 | `filterInProgressNextUpItems` drops an episode present in the resume list, keeps the genuinely unstarted next episode, leaves the rest of the row intact, and is a no-op when nothing is in progress | DR-197 | Done |
|
|
|
|
|
|
|
|
| UT-193 | The shipped Tauri security config stays restrictive: `csp` is set, `script-src` carries no `'unsafe-inline'`/`'unsafe-eval'`/wildcard, `object-src`/`frame-src` are `'none'`, the directives playback needs (asset scheme, loopback, `blob:`, `ipc:`) are present, and the asset-protocol scope covers only the thumbnail cache — never the storage root that holds the database | DR-198 | Done |
|
|
|
|
|
|
|
|
|
|
|
|
### Integration Tests
|
|
|
|
### Integration Tests
|
|
|
|
|
|
|
|
|
|
|
|
