65 Commits

Include renames

Author	SHA1	Message	Date
dtourolle	109700b949	feat(playback): let Rust decide what stream to play, and say so ... Playing a video meant asking the server to re-encode it, always. That decision was made nowhere and written down nowhere, so whoever needed it re-derived it downstream — the player worked out whether it had been handed a playlist by looking for ".m3u8" in the URL, in two places. A viewer paid for a transcode of a file their device could have played untouched, and the app could not tell them which it was. One negotiation now produces one self-describing StreamSelection — direct play, remux or transcode; over a playlist, a plain HTTP file, or a local one — and every renderer consumes that same answer. Measured against the development server (Jellyfin 10.11.5), 400 items sampled for codec mix and 40 put through a real PlaybackInfo negotiation per profile: Linux / WebKitGTK (h264 only, 2ch) 3/40 — 7% direct play Android / ExoPlayer (hevc, ac3/eac3, 6ch) 34/40 — 85% direct play The library is ~80% hevc, which is why the two diverge so hard. The payoff is overwhelmingly Android, where 85% of plays were starting a transcode nobody needed. Linux stays near 7% until libmpv decodes the picture — the h264-only profile is a WebKitGTK constraint, not a JellyTau choice. DR-219 StreamSelection: url + tagged Transport (hls/progressive/localFile) + PlaybackKind (directPlay/directStream/transcode) + the negotiated rendition + this source's ladder + a needs_transcoding flag derived in Rust so the rule is answered once. Both enums are serde-tagged so the frontend matches a discriminant, not a substring. The paths that never negotiate get the same shape from Rust rather than assembling one — media_local_selection for a downloaded file, LiveStreamInfo.transport for a live channel — so there is no second place where a transport is decided. DR-220 The ceiling becomes two levels: a durable device default (Settings, persisted) and a per-playback override the in-player picker sets. The picker had called itself a "this film, this connection" control since it was written but wrote the process-wide default, so dropping one awkward film to 2 Mbps silently capped every video played afterwards for the rest of the process, with Settings still showing the old value. The override is cleared whenever playback moves to a new item, which stops it surviving into an autoplayed next episode. effective_streaming_quality() is the single resolution point. DR-221 The quality picker is filled from what this media source can offer. Rust marks a rung exceeds_source when its ceiling is at or above the source's own bitrate — such a rung is another way to spell Original — and the frontend does not draw those. Original is never marked; a source whose bitrate the server does not report marks nothing, which keeps every rung offered. DR-222 Direct play and direct stream are negotiated, with two client-side overrides on top because the server's answer is right about the file and wrong about what this app will do with it: undecodable audio (Jellyfin 10.11.5 honours a DirectPlayProfile's container and video codec but ignores its audio codec, so it offers direct play for an E-AC-3 track the webview renders in silence) and a viewer-pinned audio track the file does not default to. A direct stream is a remux and is deliberately not counted as transcoding. DR-223 Dropped on measurement, not deferred. A master playlist from this server carries exactly one EXT-X-STREAM-INF: Jellyfin builds it from the single rendition the request asked for rather than publishing a ladder. So there is no adaptation for hls.js to be preserving and none mpv would lose — the claim that there was, in playback-backend-unification.md, does not hold. Recorded rather than deleted because it is a measurement: a server that does publish a ladder would change the answer. DR-224 Every backend consumes the same selection. The queue item carries the transport, so player_seek_video picks its seek strategy from the backend's decision instead of the last stream_url.contains(".m3u8") in the codebase. Items queued by a path that never negotiated carry None and fall back to needs_transcoding, which is exact rather than a guess because every transcode this app requests is HLS (DR-140). The frontend loader decision moves to streamTransport.ts so it can be tested: the two cases that pin it are the ones that failed against the old implementation — a progressive stream whose URL contains ".m3u8" must not get an HLS loader, and an HLS stream whose URL contains none must. Also verified the URL the direct-play branch builds actually serves playable bytes: 206, video/mp4, valid ISO-BMFF, and a mid-file range works, so seeking a direct play works. The spec is folded into docs/architecture/{01,02,03} and deleted, per the rule that docs/specs holds only work that has not shipped. DR-121 leaves read-through-media-cache.md with a pointer; that spec keeps its capture half. Not verified: real playback on a device. Direct play changes what actually gets played, and neither fixtures nor curl prove the WebKitGTK and ExoPlayer paths render it.	2026-08-22 13:45:03 +02:00
dtourolle	edff6eedc9	fix(player): let the background-audio toggle govern backgrounding again ... Locking the screen kept a video's audio playing whether or not the background-audio button was on. Reported as "audio only mode is always active even if not selected". The button (UR-040) was built for the WebView <video> path, where losing visibility kills the decode: it chose between handing off to a native audio stream and letting playback stop. Native video then became the default renderer (DR-188), and on that path playback runs through ExoPlayer inside a MediaSessionService -- a foreground media service whose entire purpose is to keep playing while the app is hidden. Nothing stopped it, and nothing in the codebase paused on background. So the button governed a handoff that no longer had a gap to bridge. There was no interruption to paper over, and a user who never touched it got background playback anyway. The gating made it self-concealing: MainActivity.onStop only dispatched 'jellytau-background' when backgroundAudioEnabled was already true. The one notification that the app had gone away was itself conditional on the setting, so with the button OFF nothing could react even in principle. onStop and onStart now fire unconditionally and carry the two facts only the activity knows -- whether the toggle is armed, and whether Android put the window into picture-in-picture. What to do about it is decided in Rust (player/background_policy.rs), because it depends on whether the item has a picture to lose: video + toggle off -> Pause video + toggle on -> HandOffToAudio music, either -> KeepPlaying (no picture to give up) picture-in-picture -> KeepPlaying (the window is still on screen) It takes no renderer parameter on purpose. Two renderers with two behaviours and one toggle reaching only one of them is what produced the defect; a rule that cannot see the renderer cannot reproduce it. Two failure modes are deliberate. A decision call that fails leaves playback alone rather than risking silence mid-listen. An event with no detail -- older Kotlin against newer JS -- reads as "armed, not PiP", degrading to the previous behaviour instead of pausing unexpectedly. Foregrounding resumes only what backgrounding paused: a video the user paused themselves before locking stays paused. Written test-first per CLAUDE.md. The stub encoded today's behaviour (nothing ever pauses) and failed exactly as reported -- `left: KeepPlaying, right: Pause` -- before the rule was implemented. Verified on a device, R8-minified, both directions: [player_background_action] video=true armed=false pip=false -> Pause [player_background_action] video=true armed=true pip=false -> HandOffToAudio UR-040 / DR-224 / UT-211.	2026-08-22 10:09:46 +02:00
dtourolle	ad48d89dfe	chore(format): run prettier over src/ and scripts/ ... Formatting was configured but never enforced: `bun run format:check` reported 199 unformatted files and ran in no workflow and in no git hook, so .prettierrc (printWidth 100, trailing commas) described an intention rather than the tree. This is the one-time sweep that makes the check gateable. Whitespace and token-reflow only -- no behavioural change: `bun run check` reports 0 errors and all 1053 frontend tests pass before and after. Kept out of every other commit on purpose. A 199-file diff mixed with real changes is unreviewable, and the next commit turns format:check into a hard CI gate so this cannot silently accumulate again.	2026-08-21 17:41:44 +02:00
dtourolle	d54d8cc7c4	refactor(logging): route frontend console calls through the logger ... TRACES: | DR-204 484 ungated `console.*` calls across 63 non-test frontend files shipped to end users with no way to turn them off. Mechanical substitution, no control flow, error handling or message semantics changed: console.log / console.debug -> log.debug console.info -> log.info console.warn -> log.warn console.error -> log.error Hand-written `"[Scope] …"` prefixes are dropped where the logger's scope now carries them; scope names that already existed are preserved verbatim (`[Auth]`, `[VideoPlayer]`, `[PiP]`, …) and inferred from the filename where a file had none. `src/routes/player/[id]/+page.svelte` keeps its `NextEpisode` and `AutoPlay` sub-scopes as separate loggers rather than flattening them into the page scope. `grep -rn 'console\.' src/` now matches nothing outside the tests and the facade itself.	2026-08-20 19:29:59 +02:00
dtourolle	ebf9a99b80	docs(traces): tag the twelve "Done but untraced" requirements, and stop the matrix over-reporting ... Twelve requirements were marked Done in docs/requirements.md with zero TRACES anywhere in the tree. The features work — the tags were simply never written — so the matrix over-reported on exactly the requirements a reviewer would most want to verify. Each is now tagged at the code that actually implements it: - JA-006 / JA-009 / JA-013 / JA-014 / JA-015 / JA-018 and IR-022 / IR-024 at their Jellyfin call sites in repository/online.rs (search, get_item's MediaStreams/People fields, Items/Resume, Shows/NextUp, FavoriteItems DELETE, get_person/get_items_by_person), plus the commands that expose them. - UR-006 / IR-006 across the lockscreen spine: JellyTauPlaybackService (the MediaSessionCompat owner), the nativeOnMediaCommand JNI intake, and LockscreenMetadata / update_lockscreen_metadata. - IR-008 at both audio-focus mechanisms — ExoPlayer-managed for audio, the manual AudioFocusRequest listener for video — and at the media-type string that chooses between them. - UR-037 (with DR-042, also untraced) on the video-library poster grid: LibraryGrid, MediaCard, and the tv/movies routes. Resolve contradictory statuses across layers, evidence first: - IR-018/IR-019 were Planned under Done URs because they were scoped to libmpv. MpvBackend is the audio-only backend and overrides neither set_subtitle_track nor set_audio_track — the trait's not_implemented() default still stands — so UR-020/UR-021 are met by ExoPlayer and by the HTML5 <video> path instead. Both IRs are re-scoped to those backends and marked Done; IT-008/IT-009 and the stale @req-planned markers in backend.rs follow. - IR-005 (MPRIS) stays Planned: there is no MPRIS/D-Bus code or dependency in the project and update_lockscreen_metadata is a no-op off Android. UR-006 is corrected to Done (Android) rather than the IR being marked Done. - A note under the IR table records where a UR is met by a different mechanism than its IR anticipated. Define the two dangling IDs the source already referenced: DR-189 (the control bar never auto-hid on a touchscreen, because its timer was armed only from onmousemove) and UT-188 (its rule test). The live-denominator assertion in extract-traces.test.ts moves 187/330 to 188/331 accordingly. Traced requirements 444 to 459; IR coverage 19/32 to 25/32.	2026-08-16 22:58:55 +02:00
dtourolle	5e8efa252e	fix(player): restart the native renderer when returning from background audio ... With native video on, coming back from background audio left a black screen: a play overlay pinned at 0:00, a seek bar at zero, and a play button that did nothing. Nothing crashed — the process stayed up and the frontend kept logging — the transition was simply dropped. The two render paths resume by different means, and exitBackgroundAudioHandoff only ever performed one of them. The webview <video> reloads off its stream URL: an $effect watches it, reinitialises HLS or sets element.src, and canplay drives the seek and play. ExoPlayer owns no element and nothing watches the URL on its behalf — native playback is only ever started by an explicit player_play_item plus adapter load, which the component issues once, from onMount. So reassigning the URL restarted precisely nothing, and since player_exit_background_audio had already stopped the handoff's audio player, the backend came back holding no item at all. That is why the play button was inert: there was nothing loaded to play. The return now re-issues that pair on the native path, in the same order as the initial load, carrying the position the audio reached. Subtitle configurations are reused from the ones resolved at mount — ExoPlayer sideloads them as MediaItem.SubtitleConfigurations and cannot accept one after prepare(). Which path to take is decided by planHandoffReturn, a pure helper in backgroundAudioHandoff.ts, so the branch is unit-testable without mounting the player. It also folds in shouldResumeOnForeground, so a pause taken on the lockscreen during the handoff still wins over the snapshot captured on the way out. Verified on device (HONOR ROD2-W09, Android 16): handoff to audio-only at 69:54, return restored native video playing at 70:18. Previously the same sequence left the player idle and black. The requirements count pin in extract-traces.test.ts moves with the new DR-196.	2026-08-16 22:10:14 +02:00
dtourolle	8e98e1c37a	test(player): answer the commands the tap-surface tests actually render ... VideoPlayer.tapSurface.test.ts deliberately does not mock $lib/api/bindings — it renders the real component against the real bindings, which bottom out in the globally mocked `invoke`. That mock resolves `undefined` for every command, so any command whose result is *rendered* blows up: the quality picker assigns the result straight to state and the template then reads `streamingQualities.length`, which throws on undefined. It threw asynchronously, outside any test, so the suite reported 4 unhandled errors while every test still passed — the state vitest warns "might cause false positive tests". Answering the two rendered commands removes them. Authored in the main checkout; brought in here and verified: 83 files, 1009 tests, and the unhandled-error count drops from 4 to 0.	2026-08-16 21:20:55 +02:00
dtourolle	c142568230	fix(player): make transport reach the player that is actually rendering ... Play/pause did nothing on the Android native video path — from the on-screen tap, from the control bar, and from a direct player_toggle invocation — while seek and skip kept working. That asymmetry was the whole clue: seek decides in player_seek_video, transport decides in toggle_playback. DR-195 is the cause. `html5_playing` is Rust's record of "a webview <video> is active and in this state", and toggle_playback/play/pause all route transport to that element whenever it is set. The player route mirrored element state into it UNCONDITIONALLY — from handleReportStart and, fatally, from handleReportProgress, which VideoPlayer calls on a 10-second interval. So on the native path the frontend re-declared every ten seconds that an element was playing when none existed, and every transport intent was emitted into the void. It also explains the flashing: the control bar and the JRay overlay both key off isPlaying, which was being contradicted on every tick. The mirror now lives in mirrorElementStateToRust() in VideoPlayer, gated on useHtml5Element — the only place that knows whether an element renders at all. The route cannot tell the paths apart, which is exactly how it came to lie. DR-193 hands transport authority back to the native backend when an item loads into it. Necessary but insufficient alone: the progress interval put the flag straight back, which is why the first device test after it still failed. DR-192 presents native video through a TextureView instead of a SurfaceView. A SurfaceView renders on its own layer outside the app window and punches a transparent region through it, and everything drawn above that hole — here, the entire Svelte UI — depends on that composition path. The overlay dropped its incremental damage: the DOM advanced (slider 476 -> 479 across three seconds) behind a screen showing neither, so the progress bar froze, controls would not fade and rotation lost the transport UI, while structural DOM changes got through, which is why the play overlay always appeared to work. It supersedes DR-191, which forced redraws in a loop and treated the symptom. DR-194 hides the video view across a resize and reveals it two frames later. A TextureView retains its last frame, so between a rotation and the re-fit landing that frame is stretched across the old rect and the previous frame flashes in what should be the letterbox bars. Verified on device (Honor ROD2-W09, Android 16) by driving ADB and reading the live DOM over the devtools socket: surface tap pauses (position frozen across 12 seconds, overlay raised, transport flipped) and resumes; the control bar does both. UT-189 drives the real 10-second interval under fake timers — an earlier version asserted on a freshly mounted player, passed with the guard deleted, and guarded nothing. Still open, and deliberately not claimed: DR-192's effect on the overlay repaint is unverified on device, DR-194's letterbox reset is untested, and the native default (DR-188) stays off pending DR-190, the background-audio return.	2026-08-16 18:03:22 +02:00
dtourolle	95129d04a3	fix(player): make Android native video actually visible, and usable ... DR-172 reverted native video to opt-in after it shipped as audio with no picture, naming the compositing as the suspect. The compositing was fine. Five separate defects sat between ExoPlayer and the screen, each able to produce that exact symptom on its own, and each invisible to the others. DR-185 — the app shell painted over the surface. app.css clears the page's opaque layers through three selectors, one of which targets `[data-app-shell]`, an attribute NO component has ever set, in any commit. The shell paints --color-background across the whole viewport and VideoPlayer stacks above it, so the WebView composited opaque no matter what else was cleared. Invisible three ways over: the CSS is valid, the selector is plausible, and a rule matching nothing looks exactly like a rule matching something already transparent. DR-182 — nothing could lift the poster card. Every markMediaReady() call site is an HTML5 <video> event, and the native branch renders no element, so the black title card covered the surface for the entire session. The first fix hooked `player://position-update` / `player://state-changed`; those channels are never emitted by the backend, so it passed a test that fired them by hand and did nothing on a device. Driven from the player store now, as the seek bar already was. DR-183 — the JS bridges raced the page load. Installed 500ms after onCreate by walking the view tree, while WebView binds injected objects at page-load time, and the identity guard then declined to re-inject forever. setTransparent(true) could never arrive. Installed from WryActivity.onWebViewCreate instead, which wry calls immediately before the first loadUrl. DR-184 — the SurfaceView was never detached. detachVideoSurface had no callers anywhere, mirroring the DR-151 defect: every native video left its surface parented to the content view and the next one stacked another beneath it. DR-191 — the overlay stopped repainting. Incremental damage (the clock's text, the control bar's opacity) never reached the screen while structural changes did, so the progress bar froze, the controls would not fade, and the play overlay appeared to work because it is added and removed from the DOM. Driven from the Activity via postInvalidateOnAnimation while compositing is on. Two UI defects only this path could reveal came with them: isPlaying froze at its initial value, leaving the play overlay dimming and covering the video (DR-186), and the control bar's auto-hide was armed solely by mousemove, which a touchscreen never fires (DR-189). Immersive mode now applies on entering the player rather than only via the fullscreen button (DR-187). Verified on a device (Honor ROD2-W09, Android 16): logcat carries `WebView transparent = true` and `Marking media ready` with video on screen — the pair DR-172 went looking for and could not find — and skip, seek, rotation and subtitle rendering were exercised by hand. The default stays OFF (DR-188). Turning it on surfaced a further unverified sub-path: returning from background audio is HTML5-only, so playback stays dead (DR-190, proposed). Shipping it would have repeated DR-161 exactly — a verified sub-path made default over an unverified one.	2026-08-16 15:28:10 +02:00
dtourolle	c0c6c5023e	fix(player): resume a transcoded video by seeking, not by asking for a stream that starts mid-item ... A resumed transcode played nothing at all: every segment came back 400, hls.js exhausted its retries and gave up, while the same episode from the beginning was fine. Jellyfin builds each segment URI by echoing the master playlist's query string into it, and its segment handler opens by rejecting any request carrying StartTimeTicks > 0 (ArgumentException → 400). So one resume position on the playlist is copied onto every hls1/main/N.ts and 400s all of them — the `> 0` being exactly why starting from the beginning survived. HLS does not need the parameter: a playlist spans the whole item and asking for segment N *is* the seek. It is removed from the URL builder entirely rather than conditionalised — the builder cannot know whether its response will be segmented — and the position becomes a seek issued once the player has loaded. The progressive /Audio/universal builder behind the background-audio handoff has no segments and keeps its StartTimeTicks, which is why audio-only handoffs resumed correctly and video ones did not. Completing that across the boundary, since the URL no longer starts where the caller asked: - reloadSource(url, position) now means "reload and resume AT this absolute position": it seeks the element once the source is playable and clears the transcode offset to zero. It previously set the offset to the position and seeked nothing, which was correct only while the URL itself began there — left in place it would have shown 20:00 on the scrubber while the opening titles played, with no seek ever happening. - The transcoded resume path in the player page collapses into the same "seek after load" branch direct streams already used. - VideoPlayer's background-audio return does the same: no base, seek to the absolute position. - The stale test asserting StartTimeTicks is present is rewritten to keep its other half (an HLS master playlist, never a progressive stream.mp4, carrying the chosen source and audio track). TRACES: UR-004, UR-005, UR-019, UR-021, UR-074 | DR-181 | UT-182, UT-183	2026-08-16 11:08:42 +02:00
dtourolle	5096c01960	fix(player): restore the subtitle sidecar work dropped by the previous commit ... The previous commit was assembled from a tree read before 13264e22 landed, so committing it reverted that commit's changes: the image-based subtitle filtering in device_profile/types, subtitleTracks and its tests, the regenerated bindings, and the VideoPlayer menu wiring. Nothing was lost — the working tree held both changes throughout. This restores those files to the merged state, leaving both the subtitle fix and the play-session fix in place. TRACES: UR-020, UR-004 | DR-176 | UT-168	2026-08-16 10:20:22 +02:00
dtourolle	2d67b0e4f5	fix(player): give every transcode its own play session, and stop the one it replaces ... Switching bitrate mid-film stalled playback. The server served the new playlist and then rejected its segments: 400 on hls1/main/0.ts, six times over 25 seconds, never recovering, while the UI logged "Streaming quality changed" as if nothing were wrong. Jellyfin keys a transcode job by device and play session. Every stream URL this app built carried the same hardcoded DeviceId and no PlaySessionId at all, so the second stream for an item was indistinguishable from the first and nothing ever stopped the old ffmpeg. Re-opening a stream is not rare — a quality switch, a transcoded seek and an audio-track switch all do it. Replayed against the server, a second stream opened for a live job's item alternates per attempt between serving bytes and 400ing, which is why it read as flaky rather than broken. begin_video_play_session mints a session id per open and reports the one it supersedes; the URL builder stops that job (DELETE /Videos/ActiveEncodings, un-retried — a slow stop must not delay playback) before returning. Putting it in the builder rather than in each caller covers every re-open path by construction. adopt_video_play_session takes ownership of the job the server starts itself when PlaybackInfo answers with a TranscodingUrl: without it the first switch on a stream has nothing to stop and collides with what is playing. Two client faults made the same incident worse and go with it: - The fatal-HLS-error handler added the transcode seek offset to a position that already included it. Past roughly the halfway mark of a film the doubled value cleared the "near end" threshold, so any transient network error was reported as end-of-stream and autoplay skipped to the next item — precisely when a quality switch had just made the offset large. The decision now lives in hlsRecovery.ts, against the absolute position. - The HTML5 reload primitive resolved on its own canplay timeout, so a reload the server never served reported success. The picker showed a quality that was not playing and the caller had nothing to revert. TRACES: UR-074, UR-004 | DR-177 | UT-173, UT-174, UT-175	2026-08-16 09:47:27 +02:00
dtourolle	13264e225b	fix(player): never let the server burn a subtitle in, and never offer one we cannot draw ... Reported as "subtitles are shown even when off", and no toggle in the app cleared them — because they were not the app's subtitles at all. The server was painting them into the video. `PlaybackInfo` omitted `SubtitleStreamIndex`, which does not mean "none": the server then honours the source's own default/forced flag. On the reported episode that default is a PGS track — a bitmap, which cannot go out as a sidecar — so the server fell back to `SubtitleMethod=Encode` and composited it onto every frame. Confirmed against the live server, which answered the same PlaybackInfo request two ways: with the index omitted it returned `SubtitleStreamIndex=2` + `SubtitleMethod=Encode` and a `SubtitleCodecNotSupported` transcode reason, and its ffmpeg command carried `[0:2]…[sub];[main][sub]overlay_qsv=…`; with `-1` it selected no subtitle stream at all. The cost landed on the video, not the subtitle: burn-in rules out remuxing, so a stream that only needed its audio transcoded was re-encoded frame by frame. Three parts: - The negotiation asks for `SubtitleStreamIndex=-1` and advertises every text format we can render (srt/subrip/ass/ssa/vtt) as `External`. - The stream URL says the same thing, because the negotiation is not what opens most streams: a quality switch, a transcoded seek and an audio-track switch each rebuild the URL on their own, and an omitted index there lets the server pick the default track back up out of whatever session state it still holds. - The picker offers only subtitles the app can actually draw. Each subtitle stream now crosses the boundary carrying `supports_external_delivery`, decided in Rust where the codec vocabulary belongs, and `None` for anything that is not a subtitle so a `false` cannot be misread as a verdict. `subtitleStreamsOf()` drops the rejected ones — and since that one function feeds the menu, the `<track>` children and the native play request alike, a bitmap track disappears from all three without its URL ever being fetched. Only an explicit "no" hides a track; a stream carrying no verdict behaves exactly as before. Nothing is lost by refusing burn-in: the app already fetches the text tracks and draws them itself (UR-020), so the server's composited copy was always redundant. Image-based tracks are consequently not offered, which is honest rather than a regression — the renderer cannot composite a bitmap, and the old behaviour paid for them by making the whole stream unwatchable. Tests were written first and observed failing: the Rust one would not compile against a field that did not exist, and the frontend one resolved a URL for the PGS track it was supposed to drop. Carries with it the in-flight per-stream `PlaySessionId` work in online.rs, whose hunks sit inside the same request builder and could not be separated from these. TRACES: UR-020, UR-004 | DR-176 | UT-168	2026-08-16 09:47:09 +02:00
dtourolle	82b6982d68	fix(player): use a speedometer icon for the streaming quality selector ... The bitrate ceiling button reused a cloud-download glyph, which read as a download action rather than a bandwidth setting.	2026-08-16 08:25:43 +02:00
dtourolle	f46d7bf676	fix(player): make native Android video opt-in again — it shipped as audio with no picture ... DR-161 flipped experimentalNativeVideo on by default so picture-in-picture could shrink a real video surface. On a device that shipped sound with a blank screen. The decode path was never at fault. Logcat shows ExoPlayer running and feeding a live SurfaceView with an active BufferQueue. The compositing was: the SurfaceView sits behind the WebView, and the step that clears the opaque layers above it never took effect — `WebView transparent = false` is logged, `= true` never appears. The video was rendering correctly the whole time, behind an opaque page. This is precisely the defect the flag existed to contain; VideoPlayer.scrubRegression.test.ts had already recorded that "the native SurfaceView has never been visible through the webview". Enabling it by default shipped a verified decode path on top of an unverified display path. Reverting costs nothing that matters: PiP does not depend on it — DR-160 drives PiP from the WebView <video> — and working video outranks PiP showing a native surface. The flag stays in Settings, now described as incomplete rather than as a performance win, so anyone helping test it still can. Fixing the compositing is the prerequisite for trying this default again (DR-172).	2026-08-16 00:42:56 +02:00
dtourolle	7387f35c7e	docs(player): correct the stale "native video defaults to off" comments ... DR-161 made `experimentalNativeVideo` default to on, but three comments still described the pre-flip world and one of them was load-bearing: - `nativeVideo.ts` labelled the store "Default off" directly above a `load()` that returns true when nothing is stored. - The two PiP comments explained themselves as "what makes PiP work in the shipping configuration", which stopped being true when Android started shrinking the real ExoPlayer surface. They still describe the Linux path and the flag-off case, so they say that instead. - `video_audio_codecs` justified its narrow codec list with "video does not play through ExoPlayer", which is no longer so on Android. The narrow list is still right, for a different reason now recorded: the flag is a user setting and a download outlives it, so only the intersection holds on both sides of the switch. DR-171 carries the same caveat. No behaviour change.	2026-08-16 00:00:10 +02:00
dtourolle	d49d027020	docs(player): allocate UR-074/DR-162 for the streaming bitrate cap ... The feature shipped tagged against DR-160, which a parallel session had claimed for picture-in-picture in the meantime. Renumbered to DR-162 across the Rust and frontend TRACES comments (the PiP tags in VideoPlayer.svelte, pictureInPicture.ts and nativeVideo.ts keep DR-160) and regenerated bindings.ts. Adds the requirement rows the tags point at: UR-074 for the user need, and DR-162 covering why the cap has to reach the PlaybackInfo negotiation and not only the transcode URL, why the ceiling is process-wide, and why the Settings default persists while the in-player override does not. Notes that this gives UR-070 its resume-at-the-same-point mechanism while the server-offered rendition list that requirement also asks for stays proposed. UT-156/157 record what the tests pin. docs/specs/streaming-bitrate-cap.md carries the layer assignment — the step definitions, the video/audio split, the resolution pairing and the reload decision are all Rust; the frontend holds a serde token and the labels it was handed. TRACES: UR-074 | DR-162 | UT-156, UT-157	2026-08-15 16:39:53 +02:00
dtourolle	dda2ff86a3	feat(player): cap streaming bandwidth with a user-chosen bitrate ceiling ... Video streams were opened at a fixed allowance nobody could change: MaxStreamingBitrate=20000000/VideoBitrate=18000000 on the HLS transcode URL, 20 Mbps in the PlaybackInfo negotiation, and a 999999999 device profile that let the server direct-play a source of any size. On a metered or slow connection there was no way to spend less. StreamingQuality is a ladder of bandwidth ceilings — Original, 20/10/8/ 4/2/1 Mbps and 720 kbps — where a step bundles the total ceiling, the audio share of it and the resolution that budget can carry. Those numbers are Jellyfin encoding vocabulary, so they live in Rust and the frontend only names a variant; labels and details come back over IPC from player_get_streaming_qualities, the same arrangement as the EQ presets. The cap has to reach the *negotiation*, not just the transcode URL: max_static_bitrate in the device profile is what makes the server refuse to direct-play a file fatter than the cap, and without it a 30 Mbps remux is handed over untouched and every URL parameter downstream is moot. So it is applied at all four places that decide bandwidth — the HLS URL builder, PlaybackInfo, the Live TV stream, and the background-audio handoff (which takes the lower of the cap and its own 384 kbps). Video bitrate is the total minus the audio share so the two together honour the ceiling rather than overshooting it. The ceiling is process-wide rather than a repository field: it is a preference about this device's connection, must survive a repository rebuilt on re-login, and every URL builder plus the negotiation have to agree on it or the cap leaks. Same shape as INCLUDE_CATALOG_BROWSE. Two ways in. Settings holds the durable default, persisted to app_settings and restored at startup — unlike the rest of VideoSettings, because a limit set for a metered connection that silently reverts to uncapped on the next launch spends the user's data with no changed setting to see. The in-player menu is the "this film, this connection" override: a cap is a property of the stream the server is producing, so it cannot apply to one already in flight — player_set_stream_quality re-opens the stream at the new quality and resumes at the current position, reloading the native backend itself and handing HTML5 a URL for the same reloadSource primitive the audio-track switch uses. Tests pin the URL parameters at a capped and an uncapped step, the handoff taking the lower of the two, the ladder's internal consistency (video + audio == cap, resolution descending with bitrate) and the persisted token's round trip. The ceiling is process-wide, so the tests that depend on it serialise on a guard that restores the default. TRACES: UR-074 | DR-160 | UT-156, UT-157	2026-08-15 16:34:56 +02:00
dtourolle	9f5f57cba4	fix(ui,player): scroll restore, immersive fullscreen, watched toggle, handoff timeline, PiP ... Batch of reported bugs and enhancements. UI - Pages no longer inherit the previous page's scroll position (DR-156, UR-072). The shell keeps its scrollers alive across navigation by design, so the element never remounts and its scrollTop survived the route change; SvelteKit restores window scroll, which this app never uses. ScrollMemory records the offset per route and per container: forward moves reset to the top, Back restores where the route was left. - Season header stacks on narrow screens, and the title span gets min-w-0 so it actually truncates instead of overflowing under the action buttons. - Favourites gets a labelled tile at the head of the library grid rather than only an unlabelled heart icon in the header. Playback - Full-screen video on Android hides the system bars (DR-157, UR-066). requestFullscreen() cannot touch the Activity window from inside a WebView, so the control did nothing visible while the bars stayed painted over the video. ImmersiveModeBridge hides them, restored on exit, Escape and teardown. - Background-audio handoff stops leaking its relative timeline (DR-159). background_audio_base was a display-only correction applied in two places while progress reports to Jellyfin, the frontend and media3's own seeks all worked in the relative timeline treating it as absolute — each crossing losing exactly `base` seconds. The conversion now happens once, in the position tick, and inbound seeks resolve through seek_absolute, which re-opens the stream at the requested position because the handoff transcode cannot seek. - Picture-in-picture works on the path that actually plays video (DR-160). canEnterPip demanded a native ExoPlayer surface, but that path is behind a flag defaulting to off, so PiP could never engage. It now accepts the WebView <video> too, keeping the WebView visible and routing play/pause to the element. - Native video is now the default so PiP has a real surface (DR-161). The scrub-regression tests pinned the flag-off path implicitly; they now mock it off explicitly. The native scrub/seek path is not covered by the suite and needs device verification. Watched state - Watched toggle on the episode row, season header, series and movie hero, and the Episode Focus View (DR-158, UR-073). Both backend halves already existed with no caller. storage_set_watched covers a container's episodes so the toggle is honest offline, and QueuedOp::MarkUnplayed gives the sync queue the missing direction. Release - Fix the Android versionCode floor (set-version.sh). v0.5.2 shipped code 5002 under an earlier minor*1000 scheme, but the current minor*100 formula yields 1502 for that version and 1503 for 0.5.3 — so every 0.5.x release built from it was an un-installable downgrade for anyone already on v0.5.2. Widened to 10000 + major*1000000 + minor*1000 + patch (0.5.3 -> 15003). - Bump to 0.5.3.	2026-08-15 16:26:31 +02:00
dtourolleandClaude Opus 5	2d50744320	fix(player): resume at saved position on the Android native path ... The native (ExoPlayer) video path never applied the resume position, so "resume from where you left off" always played from the start on Android. Two layers each assumed the other did the seek: - The only code acting on `initialPosition` was handleCanPlay, an HTML5 <video> event handler. The native path has no <video> element, so `canplay` never fires and that seek never ran. - NativePlayerAdapter.load() had an initialPosition branch, but it only recorded the number, claiming "the native backend performs the actual seek internally". It does not: PlayItemRequest carries no start position, and loadWithMetadata -> prepare() always starts ExoPlayer at 0. - VideoPlayer never called adapter.load() at all, so even that branch was unreachable. The frontend therefore believed it had resumed (the seek bar showed the resume point) while ExoPlayer played from the beginning. NativePlayerAdapter.load() now issues the backend seek, excluding live streams (no resume point; seeking knocks the HLS window off its live edge). VideoPlayer calls it on the native branch and marks the initial seek as performed so the existing $effect does not fire a duplicate. The HTML5 path is untouched: seeking before metadata is clamped to 0, which is exactly what handleCanPlay waits for. Verified red->green: the new test failed with "Number of calls: 0" before the fix. Full frontend suite passes (933 tests); svelte-check and check:boundary are clean. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-12 18:51:37 +02:00
dtourolleandClaude Opus 5	e144e62b31	feat(player): render Android video natively behind a transparent webview (DR-150, DR-151, DR-152) ... Rust already reported `use_html5_element: false` on Android, but two frontend overrides threw that answer away, so ExoPlayer's video path had never actually run. Both are lifted behind an `experimentalNativeVideo` opt-in (default off). The flag is a suppressor, never a promoter: off forces HTML5 even where Rust says native, so an in-progress spike cannot ship as the default, but it can never select native where Rust reported HTML5 — Linux cannot composite behind WebKitGTK, and promoting there would be a black screen. Two blockers the spec did not anticipate, both in code assumed to be merely unreachable rather than broken: - `JellyTauPlayer.setActivity()` had zero callers, so `currentActivity` was always null and `autoAttachSurface()` bailed. The SurfaceView was created and wired to ExoPlayer but never added to the view hierarchy — video would have decoded to a surface that was never on screen, whatever the webview did. This also revives PiP on the video path, which gated on the same flag. - `createAdapter()` was not the real gate; it is never called in production. The actual override was in VideoPlayer.svelte, which forced HTML5 and stopped the native backend `player_play_item` had just started. Both sites now route through `createAdapter()`. Compositing needs two independent opaque layers cleared, not one. Clearing only the page leaves the WebView widget opaque — audio over a black picture, exactly the symptom the old INTERIM comment described. `videoSurface.ts` toggles both: the widget background and window drawable from Kotlin, the page backgrounds via a `data-native-video` attribute keyed by app.css. Transparency lives in `tauri.android.conf.json` so Linux keeps an opaque window, and is scoped to the playback session so the launcher never shows through the rest of the app. Phase 3's rect plumbing turned out to be unnecessary: video is fullscreen on the player route, and `fitSurfaceToScreen()` already letterboxes and re-fits on rotation. The mini-player transition remains unverified on device. Also removes the `navigator.userAgent` sniffing in webviewAudio.ts, which was a second copy of the Rust cfg gate free to drift from it. `player_get_capabilities` now reports `usesWebviewAudio` and `supportsNativeVideo` from those same gates. Tests: adapter selection covers the full matrix, including the regression guard that the flag off beats Rust. Written first and confirmed failing (2 of 7) before the fix. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-11 20:57:58 +02:00
dtourolle	6a712c46cb	fix(player): send subtitle tracks to ExoPlayer on Android (UR-020) ... Selecting a subtitle on Android did nothing. The Kotlin side has been complete for a long time — JellyTauPlayer.load() parses a subtitles JSON array into MediaItem.SubtitleConfigurations and setSubtitleTrack() drives a TrackSelectionOverride — but nothing ever reached it. VideoPlayer built the list and then threw it away: it resolved every subtitle stream's URL into a subtitleTracks array and the commands.playerPlayItem({...}) call two lines below passed only streamUrl, title, id, videoCodec and needsTranscoding. PlayItemRequest had no subtitle field to put them in, so create_media_item hardcoded subtitles: vec![], android/mod.rs serialized "[]" across JNI, and every MediaItem reached ExoPlayer with zero SubtitleConfigurations. A later set_subtitle_track then found no text track groups and logged "Invalid subtitle track index". PlayItemRequest now carries the tracks (defaulted, so the background-audio handoff and next-episode callers are unchanged) and create_media_item threads them onto the MediaItem. Serialization: SubtitleTrack is reused verbatim rather than given an IPC-specific twin, and deliberately keeps snake_case. The same struct feeds two consumers that both spell mime_type — the JNI JSON that JellyTauPlayer.load() reads with optString("mime_type"), and the generated binding the frontend types against. camelCasing it would not fail the build or the IPC; Kotlin would silently fall back to its default MIME type for every track. UT-146 asserts the exact serialized keys so a future rename_all cannot pass unnoticed. The index mapping was NOT already correct. setSubtitleTrack(n) indexes ExoPlayer's filtered text track groups, i.e. the position of the sideloaded configuration — but the menu passed its own {#each} row number, which counts every subtitle *stream*, including ones whose URL failed to resolve and were therefore never sideloaded. One failed URL and every track below it selected the wrong subtitle. The position is now looked up in the exact array that was sent (nativeSubtitleArrayIndex), and a stream that was never sent maps to "off" rather than to a guessed position. The resolution loop also reuses resolveSubtitleTracks() from the Linux fix instead of duplicating it, which fans the URL requests out in parallel rather than awaiting them one per stream before playback can start. The awaits are safe where they sit: the native-mode pitfall is about Svelte lifecycle calls after an await, and nothing is registered here — the background-audio subscriptions above still run synchronously. No Kotlin change was needed. Tests (UT-145, UT-146, UT-147) were written first and failed: PlayItemRequest had no subtitles field to compile against, nativeSubtitleTracks and nativeSubtitleArrayIndex did not exist, and the playerPlayItem call carried no subtitles key. TRACES: UR-020 | IR-016, JA-008 | UT-145, UT-146, UT-147	2026-08-11 20:03:19 +02:00
dtourolle	211792947d	fix(player): render subtitle tracks on the Linux HTML5 path (UR-020) ... Selecting a subtitle on Linux did nothing. VideoPlayer rendered no <track> children at all — the block was commented out as "temporarily disabled to debug playback issues" (it has been that way since the POC) — so Html5PlayerAdapter.selectSubtitle() walked an empty textTracks list and the menu, which is built from media.mediaStreams, was purely decorative. The reason it had to be disabled is still visible in the dead markup: getSubtitleUrl() is async, so src={getSubtitleUrl(track.index)} bound a Promise to the attribute and every track pointed at "[object Promise]" — an unloadable resource hanging off the media element. Subtitle URLs are now resolved off the render path into component state (subtitleTracks.ts), and only streams whose URL actually resolved are rendered; a per-track failure drops that track instead of emitting a dead src. data-stream-index is kept, since that is what the adapter matches on. Subtitles stay OFF unless the user asks for them: the server's isDefault flag is shown in the menu but is never promoted to a selection, and the `default` attribute is deliberately not emitted. A <track default> auto-shows, so the menu would open on "Off" while subtitles were burned over the picture, and every user who never wanted subtitles would suddenly get them. That matches the existing initial state (selectedSubtitleIndex = null). Selection and rendered tracks are reconciled whenever the list changes: a selection that no longer resolves collapses to "Off", and a surviving one is re-applied after the new <track> elements exist. "Off" disables every text track, as before. Cross-origin text-track fetches use the media element's CORS setting, so the element opts in with crossorigin="anonymous" — but only for an http(s) stream, never for a local/offline file:/asset: source, where forcing CORS onto the video fetch could break playback. It is keyed on the subtitle stream count, known at first render, so the attribute cannot flip under an in-flight media load. Android/native is untouched: the ExoPlayer branch still goes through player_set_subtitle_track. Tests (UT-143, UT-144) were written first and failed against the old markup: the commented-out block, the Promise bound to src, and the default attribute. TRACES: UR-020 | DR-023 | UT-143, UT-144	2026-08-11 19:25:39 +02:00
dtourolle	878ac5fa59	fix(player): make lockscreen transport reach background audio (DR-097) ... Pausing from the lockscreen did nothing while a video's audio played in the background. The handoff starts native ExoPlayer audio and only then tears the WebView <video> down, and that teardown fires a DOM `pause` the frontend reports like any other — leaving html5_playing = Some(false). Transport therefore stayed aimed at the element: the lockscreen pause emitted a ControlCommand into a <video> that no longer existed while the native player carried on. The controller now tracks a background-audio handoff explicitly. Entering one hands transport authority to the native backend and drops the dying element's state/position/media-loaded reports, which also stop flipping the UI to paused and dragging the position backwards. Exiting restores the element as the player. A lockscreen pause also has to survive the return to the foreground: the video used to resume from a snapshot taken at handoff time, undoing the pause on the way back in. shouldResumeOnForeground() lets an explicit `paused` from the player override that snapshot. TRACES: UR-040, UR-005 | DR-052, DR-097	2026-08-05 12:26:25 +02:00
dtourolle	c55ff45692	fix(android): clear the system bars and display cutout (UR-066) ... The bottom nav rendered under the Android navigation bar, and full-screen playback controls spilled into unusable screen edges. It looked device-specific (Motorola bad, Fairphone fine) but every device was equally unpadded — only the intrusion differed: a tall opaque 3-button bar swallows the nav, a thin translucent gesture pill overlaps harmlessly. None of the app's safe-area handling was ever active, for two independent reasons: 1. app.html had no `viewport-fit=cover`, so every `env(safe-area-inset-*)` resolved to 0px — the padding in app.css and BottomUi was a no-op. 2. Android WebView maps only the *display cutout* into `env()`; the status bar and navigation bar are never reported. With enableEdgeToEdge() and targetSdk 36 (enforced from 35, opt-out ignored from 36) the WebView always spans them, so CSS could not learn about them by any route. WindowInsetsBridge now reads `systemBars() | displayCutout()` and publishes `--jt-inset-*` CSS custom properties, both pushed on every inset change (rotation, nav-mode switch, PiP) and pullable via `AndroidInsets.get()` — the pull is required because the first inset pass lands before the document exists and a page load wipes the pushed inline style. app.css folds them with `env()` via `max()` into `--safe-*`, the only thing components may pad from. Exactly one element owns each edge: the shell takes top/left/right, BottomUi takes bottom (inside its surface box, so the colour extends behind the gesture bar), and shellReservesBottomInset hands bottom back to the shell on routes with no bottom UI. The full-screen players inset their control layers only, leaving video and artwork edge-to-edge. The theme's `fitsSystemWindows=true` claimed the opposite of what actually happened — overridden at runtime, ignored at this target SDK — and is removed. Also converts six nested `h-screen`/`min-h-screen` boxes to `h-full`: the shell is `h-screen` *and* inset-padded, so its content box is `100vh - safe-top` and any nested 100vh box overflows by exactly the inset (the library column would have clipped its own BottomUi). A test guards against reintroduction.	2026-08-04 14:45:10 +02:00
dtourolle	a818fee297	fix(player): re-entering a video no longer opens the audio player (DR-100) ... Leaving a video and returning to it rendered the movie/episode in AudioPlayer. Closing a webview-rendered video deliberately emits no "stopped" state (that would break the autoplay handoff), and the direct-play path does not stop the backend on unmount, so the Rust controller still reported that item as its loaded media. Re-entering the route therefore took the "already playing, just show the UI" shortcut, which returns before a stream URL is fetched, and the render fell through to the audio surface. Mostly visible on Android, where video direct-plays; Linux transcodes and stops the backend on unmount. Both decisions move into playerSurface.ts as pure functions: shouldReuseActivePlayback excludes video, so video always takes the full load path and gets its stream URL and resume position; resolvePlayerSurface maps video-without-a-stream-URL to "pending" (spinner) rather than falling through to audio.	2026-08-03 18:12:37 +02:00
dtourolle	9d099268b9	fix(player): make the video seek bar work by touch (DR-099) ... On Android, dragging or tapping the progress bar moved the thumb but playback stayed where it was. Two separate defects, both touch-only, which is why the mouse-driven scrub tests never caught either. 1. Gesture hijack. DR-098 taught handleTouchStart to ignore touches that land on a control, but handleTouchMove kept running. It measures against touchStartX/Y, which that early return leaves at the PREVIOUS gesture's values, so a seek-bar drag produced a huge bogus vertical delta: read as a brightness swipe, it dimmed the screen to the 0.3 floor and fired a spurious play/pause "correction" mid-drag. A gesture is now latched at touchstart (playerGestureActive) and touchmove ignores anything unlatched — re-checking the move target cannot recover a start point that was never recorded. 2. Commit signal. The seek was committed only from `change`, which Android's WebView does not reliably fire for a touch interaction on a range input, so the thumb moved to the tapped position and no seek ever ran. touchend/mouseup now commit too; `input` arms a one-shot latch so whichever release signal arrives first commits and the other is a no-op. seekRelative shares the same commitSeek entry point instead of fabricating a synthetic change event. Tests drive the slider with real touch events (UT-089, UT-090) and fail against the pre-fix component.	2026-08-01 10:41:23 +02:00
dtourolle	b12e99b7e1	fix(player): keep double-tap seek working over the play overlay (DR-098) ... The control-surface guard added in the previous commit killed double-tap-to-seek. The first tap pauses, which renders the full-screen <button> play overlay over the video, so the SECOND tap lands on a button — and the guard discarded it as "a tap on a control". Mark that overlay `data-player-surface`: visually it IS the video, so it must keep taking tap gestures despite being a <button>. The marker wins over the interactive-tag check in isControlSurfaceTouch. Adds VideoPlayer.tapSurface.test.ts, which renders the REAL component and dispatches real touch/click events at whatever element is genuinely on top. This is the gap that let four bugs ship in a row: the pure-unit tests over registerTap/isControlSurfaceTouch/isSynthesizedTouchClick all passed throughout, because each helper behaved exactly as specified — every bug was in the composition, i.e. which element actually receives a tap after Svelte re-renders. Modelling that DOM by hand in a test would just re-encode the same wrong assumption, so these render it instead. The new double-tap test was verified to fail with the fix reverted and pass with it applied, in both directions.	2026-07-30 15:44:38 +02:00
dtourolle	dc8b732465	fix(player): controls bar taps are not player gestures (DR-098) ... The bottom play/pause button did nothing. The gesture listener lives on the outer container and touch events bubble, so tapping the button ran handleTouchStart (toggle #1) and then the button's own onclick (toggle #2). The two cancelled out, leaving the control apparently dead. Ignore container-level gestures for touches that land on an interactive control: buttons, links, inputs (the seek bar), or anything inside the controls bar, now marked `data-player-controls`. The rule itself is a pure function over the ancestor chain (isControlSurfaceTouch), so it is unit tested without a DOM. Same root shape as the play-overlay bug in the previous commit: a second click target over the video that the gesture layer did not account for.	2026-07-30 15:27:01 +02:00
dtourolle	b98a530f48	fix(player): guard the play overlay against the synthesized touch click ... After the DR-098 tap rewrite, pausing became impossible while unpausing always worked — an asymmetry that pointed straight at the overlay. Pausing renders a full-screen play-overlay button over the video. The compatibility click Android synthesizes from the tap arrives ~30-130ms later, by which time that button exists, so the click lands on the OVERLAY rather than the <video>. Its onclick called togglePlayPause with no guard at all, resuming immediately. Unpausing was unaffected because it removes the overlay, leaving nothing to intercept the click. The suppression rule was only wired into the video element's handler. Extract it as isSynthesizedTouchClick() in tapGestures.ts (unit-tested) and use it from every click target layered over the video, the overlay included. Verified: 724 frontend tests pass, svelte-check clean. Bumped to 0.2.5 so the APK installs over 2004.	2026-07-30 15:10:59 +02:00
dtourolle	b565c4ae6f	fix(player): tap gestures act immediately, no deferral timer (DR-098) ... Tapping the video surface pause-looped: it would unpause and bounce straight back to paused about a second later. Long-press unpaused fine, which is what pinned it to the tap path rather than the media pipeline. The gesture handler deferred the first tap's play/pause behind a 300ms timer so a second tap could cancel it and seek instead. But the timer callback cleared its own handle *before* invoking the toggle, and handleVideoClick used exactly that handle (`tapTimeout !== null`) to suppress the compatibility click Android's WebView synthesizes after a touch. So the guard was already open when the late click arrived, and it toggled a second time. Replace the deferral with immediate action — there are only first and second taps: 1st tap: toggle play/pause 2nd tap: seek, then toggle play/pause again The second toggle undoes the first, so a double tap seeks while leaving the play state exactly as it was: playing jumps and keeps playing, paused jumps and stays paused. No timer, no window race, no loop. Click suppression no longer depends on the timer: ignore detail === 0 and any click within 700ms of a touch tap, since Android can deliver the synthesized click late and with a real detail value. A swipe now undoes the touchstart toggle (latched on swipeGestureActive so it happens once, not per touchmove frame), keeping brightness swipes from changing the play state. UT-085..087 described the old deferred behaviour and are updated to the new contract. UT-091 is used for the DR-097 facade tests, since UT-089 and UT-090 were already claimed by extract-traces.test.ts.	2026-07-30 14:53:20 +02:00
dtourolle	a2dbde5492	debug(player): log pause reason and flatten the debug tick ... An unexplained pause/resume loop was invisible over adb: handlePause logged nothing at all, so only the "playing" half of each cycle showed up, and the 1s debug tick logged an object — which the Android WebView console bridge renders as "[object Object]", discarding every field. Log the element state on pause (readyState, networkState, seeking, ended, plus the component's own isSeeking/isBuffering/handoff flags) and emit the debug tick as a flat string. This is what identified DR-097: the element was fully buffered and healthy at every pause, ruling out a stall and pointing at a competing controller instead.	2026-07-30 13:55:06 +02:00
dtourolle	98a6bca645	fix(player): clamp seeks inside media to stop end-of-stream pause loop (DR-095) ... Seeking near the end of a transcoded video locked the player into a stall/pause loop: unpausing or skipping bounced straight back to paused. Both seek paths clamped the target to exactly `duration`. hls.js then requested the segment whose start time lies *past* the end of the media (a 6330.324s item asks for segment 1055, starting at 6336.33s). Jellyfin never produces that segment, the fetch times out, and the gap-controller stalls forever at the last buffered position — retrying ~1x/second and firing an endless stream of AbortErrors as play() lands mid-nudge. Clamp strictly inside the media instead, keeping one segment length (6s) of margin, floored at 0 so short media still seeks to the start. The seek-bar drag path needed this too: its range input `max` is the duration itself, so dragging fully right produced the same dead target. Also bumps the requirement-count fixture for the new DR-095 row.	2026-07-30 12:52:03 +02:00
dtourolle	d1c01a6bc3	feat(player): defer single tap so a double tap doesn't also toggle pause ... A tap cannot be classified when it lands — it may still turn out to be the first half of a double tap. Play/pause is therefore deferred until the 300ms double-tap window closes, and cancelled outright if a second tap arrives, so a double tap seeks without also toggling pause. Forward skip moves from 10s to 30s (back stays 10s), for both double tap and the keyboard arrows. The timing rules live in tapGestures.ts so they are unit-testable without mounting the player. Rapid double taps now chain off a still-in-flight seek target instead of all resolving against the same not-yet-updated position. TRACES: UR-005, UR-061 | DR-092 | UT-085, UT-086, UT-087, UT-088	2026-07-28 01:33:04 +02:00
dtourolle	7650efcb7f	fix(player): scale video to fill the player viewport ... The <video> element used `max-w-full max-h-full`, which only ever shrinks oversized media. A source smaller than the window (480p on a 1080p display) rendered at its intrinsic size — a small picture floating in a black frame. Fill the container and let `object-contain` do the scaling, so the picture fits whichever axis constrains it in both directions while preserving aspect ratio. The sizing rules move to `videoFit.ts` so they are unit-testable outside the component.	2026-07-25 15:12:53 +02:00
dtourolle	ee584aced2	fix(autoplay): advance to the next episode in background audio mode ... An episode handed off to the audio-only path for background playback is a MediaType::Audio item, so autoplay's video-only checks stopped recognising it as an episode: playback simply ended at the episode boundary instead of continuing to the next one. - Carry episode identity (item_type, series_id) through the background-audio handoff so the backend queue item still knows it's an episode; is_episode_item now trusts item_type over the media_type heuristic, and the sleep timer's episode counter follows. - The frontend normally performs the advance by navigating to /player/<id>, which is unavailable while the WebView is suspended. advance_to_next_episode_audio_only drives it entirely in the backend: fetch the next episode, build its audio-only stream URL, and load it into the native audio player, preserving episode identity so the following boundary advances too. - Android's autoplay dispatch routes background-audio episodes to that backend advance and keeps the countdown path for the foreground. - get_audio_only_stream_url_for_video joins the MediaRepository trait (online delegates to the existing builder, offline errors) so the controller can reach it without a frontend round-trip. TRACES: UR-040, UR-023 | DR-052 | JA-032	2026-07-25 09:21:08 +02:00
dtourolle	90f03dd142	fix(player): show background-audio button on all Android video playback ... The audio-only (background-audio) button was gated on the AndroidBackgroundAudio JS-bridge probe, resolved once as a const at mount. The bridge is injected into the WebView asynchronously and races component mount, so on some loads the probe returned false and never recovered, hiding the button on 'some videos' at random. Gate on platform() === 'android' instead (synchronous, stable), matching the convention in VolumeControl. toggleBackgroundAudio() already no-ops if the bridge is momentarily absent. Bump version to 0.0.18.	2026-07-24 20:32:08 +02:00
dtourolle	1968c06172	domain: neutral StreamKind for media streams (phase 4d) ... Add StreamKind enum (audio/video/subtitle/other) to the domain module with a total stream_kind_from_jellyfin mapper. MediaStream gains a kind field (dual-carry), populated at the mapping seam. Frontend VideoPlayer track/ subtitle selection and the channel-video check now use stream.kind instead of the Jellyfin stream.type string. Rust 456 (+ stream_kinds_map test), frontend 644, check clean.	2026-07-23 22:11:31 +02:00
dtourolle	ec8a7610f5	domain: player/reporting ticks -> milliseconds (phase 4c) ... Playback position now crosses the IPC boundary in milliseconds. Ticks survive only inside Rust (DB storage, Jellyfin API) and at the genuine remote-session boundary (session seek / transfer / RemoteControls). Rust command signatures (ms in, converted to ticks internally): - storage_update_playback_progress / _context: position_ms - repository_report_playback_start / _progress / _stopped: position_ms - PlaybackProgress.position_ticks -> position_ms (converted in the query) Frontend: - playbackReporting, playerEvents, VideoPlayer, Queue, player/[id] resume: seconds*1000 / durationMs/1000 instead of tick math. - repository-client + syncService param names -> positionMs. - Tests updated to ms fixtures/assertions. Out of scope (legitimately ticks): NowPlayingItem, PlayState.positionTicks, sessionSeek, playbackModeTransferToLocal, RemoteControls, SessionCard — the remote Jellyfin session API. Rust 456, frontend 644, check clean.	2026-07-23 22:02:29 +02:00
dtourolle	93d198ce21	domain: primaryImageTag -> imageId end-to-end (phase 4a/4b) ... Rust: PlayerMediaItem and MergedMediaItem gain image_id (dual-carry), populated from primary_image_tag at every construction/conversion site. Regenerated bindings. Frontend: all catalog + player + merged readers now use imageId. The NowPlayingItem->MediaItem bridge (player.ts) properly maps the remote session's Jellyfin fields (Type, runTimeTicks, primaryImageTag) onto the neutral kind/durationMs/imageId. Types that are genuinely out of scope (Person, NowPlayingItem, PlayItemRequest) keep primaryImageTag. Rust 456, frontend 644, check clean.	2026-07-23 21:40:58 +02:00
dtourolle	7660a33dfc	domain: catalog frontend off Jellyfin ticks -> milliseconds (phase 3a) ... The catalog surface now speaks milliseconds, the app's neutral time unit. Ticks no longer reach library/home components. Rust: - UserData gains playback_position_ms (dual-carry), populated from ticks at the offline mapping seam via domain::ticks_to_ms. Frontend: - formatDuration(duration.ts) and the two local copies now take ms, not ticks; all callers pass item.durationMs. - Progress bars (EpisodeRow, EpisodeFocusView, MediaCard, LibraryListView) compute playbackPositionMs / durationMs — unit-consistent, no tick math. - PlaylistDetailView totalDuration sums durationMs. - duration.test.ts + TrackList.test.ts fixtures updated to ms. Deferred: player/session/reporting tick math (Queue, SessionCard, RemoteControls, playbackReporting, playerEvents) — those cross the storage/Jellyfin command boundary in ticks and need command-signature changes (phase 3b). Display {item.type} badge -> kind label (phase 4). Rust 456, frontend 644, check + check:boundary clean.	2026-07-23 21:30:04 +02:00
dtourolle	acf1bb200d	fix resuming video playback after background audio only mode.	2026-07-22 22:28:07 +02:00
dtourolle	3fbf6afdbc	Background-audio handoff for video + repository/player refactor ... Hand video playback off to a native audio-only stream when the app is backgrounded or locked, with no on-device video decode (UR-040). Adds player_enter/exit_background_audio commands, an audio-only stream URL for video items across the repository layer, and the frontend handoff state machine wired into VideoPlayer. Includes accompanying repository/offline/player refactoring and regenerates the traceability matrix.	2026-07-22 21:52:07 +02:00
dtourolleandClaude Opus 4.8	1fa5aa46f9	Android picture-in-picture, and fix three dead Android config files ... Add PiP for native (ExoPlayer) video on Android. Video renders into a SurfaceView behind the WebView, so PiP is driven by the Activity shrinking into a floating window rather than the HTML5 PiP API (which WebKitGTK does not implement, hence Android-only). - PictureInPictureManager.kt: enter PiP with the video's aspect ratio (clamped to the 1:2.39-2.39:1 range Android accepts, outside which it throws), plus a play/pause RemoteAction. Hides the WebView while in PiP - it is opaque and sits above the surface, so it would otherwise occlude the video entirely - and re-fits the surface on exit. - MainActivity.kt: onUserLeaveHint auto-PiP, onPictureInPictureModeChanged, and an AndroidPictureInPicture JS interface following the existing AndroidAudioFocus pattern. - pictureInPicture.ts + VideoPlayer.svelte: PiP button, rendered only when the native bridge reports support. - proguard: keep rules for @JavascriptInterface methods, which are only referenced from JS and would be stripped in minified release builds. Casting needs no special handling: canEnterPip() checks natively that a local video surface is attached and playing, which a remote session lacks. While wiring the manifest, found that three tracked files under src-tauri/android/ were never reaching any build. Gradle reads only gen/android/app/src/main/, and sync-android-sources.sh did not copy them: - src/main/AndroidManifest.xml was a partial <application> fragment written as if Tauri merged it. It does not - there is no manifest-merger hook here, so its hardwareAccelerated flag never reached an APK. Promoted to the complete authoritative manifest (folding in that flag) and synced. - src/main/res/values/themes.xml (transparent status bar, fitsSystemWindows) was never copied; the sync only globbed mipmap-*. Now synced. - build.gradle.kts was a leftover com.android.library module config with stale media3 1.5.1 deps. The live deps are in app/build.gradle.kts at 1.5.0. Deleted. Verified: merged manifest now carries hardwareAccelerated, supportsPictureInPicture, resizeableActivity and the density configChange; themes.xml compiles into merged resources; Kotlin builds warning-free; svelte-check clean; 537 frontend tests pass. Not verified: PiP behaviour on a device, and the release keep rules against a minified build. assembleUniversalDebug cannot complete in this environment - the Rust step wants a dev-server addr file that only exists under `tauri android dev`. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-18 12:59:39 +02:00
dtourolle	2d141e5bf4	Fix for offline mode	2026-07-03 19:37:34 +02:00
dtourolleandClaude Opus 4.8	a64e1b1fb4	Introduce PlayerAdapter contract; decision logic shared in Rust backend ... Establish a decoupled player boundary so UI and backend interact with video through one contract, with the HTML5 (Linux/interim-Android) and native (ExoPlayer) providers as interchangeable primitive-executor adapters. - PlayerAdapter interface + AdapterHost callback bag (adapters/types.ts): the adapter owns only decision-free element PRIMITIVES (seekElement, reloadSource, play/pause, setVolume, selectSubtitle); it never branches on strategy. - Seek/audio-track DECISIONS stay in Rust (player_seek_video / _switch_audio_track return a strategy); the facade dispatches the chosen primitive to the active adapter. Both providers share the one decision path — logic lives once, in Rust. - Facade holds the active adapter; a new ControlCommand PlayerStatusEvent lets backend control (lockscreen/remote/sleep) drive the webview <video> element. - Html5PlayerAdapter resolves the LIVE element via the bridge (fixes play/pause silently no-opping when the element was re-bound). - Do not emit a "stopped" player state on natural end-of-video: it flipped the player/mode to idle mid-handoff and suppressed next-episode auto-advance under a sleep timer. Jellyfin progress reporting is preserved; the backend's on_video_playback_ended owns the transition. - VideoPlayer net -300 lines (strategy/HLS-reload logic relocated to the adapter). - Adds 20 adapter unit tests; existing suites stay green (vitest 457, cargo 416). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-02 19:56:20 +02:00
dtourolle	1f6977cd01	Playback fix	2026-07-02 18:13:55 +02:00
dtourolle	6af7f7dcca	Fix android playback issue	2026-07-02 00:19:07 +02:00
dtourolle	75014ee00f	Fix sleep bug, fix menu return	2026-07-01 23:49:51 +02:00
dtourolleandClaude Opus 4.8	342f95cac1	Wire up playback reporting, fix duration flash, hide video from audio mini player ... Playback reporting (position sync / resume-on-another-device): - player_configure_jellyfin now builds a PlaybackReporter sharing the player controller's Arc, so Start/Progress/Stopped actually reach Jellyfin on every auth path (login/restore/reauth); previously they never did. - The PlaybackReporterWrapper now shares the same Arc the controller and MPV progress loop report through, instead of a dead parallel Option. - Android position callbacks now emit throttled progress reports (30s/item), mirroring the MPV backend. Duration flash on pause: - resolveDuration() prefers the live store duration for the already-loaded track over the runTimeTicks estimate, so pausing no longer clobbers the slider's max to 0 when runTimeTicks is missing. Video leaking into audio mini player: - isVideoItem() also checks the backend PlayerMediaItem mediaType discriminator, so a video started via player_play_item (no Jellyfin `type`, mediaType "video") no longer surfaces in the audio mini player. Middle-truncation of long media names: - New truncateMiddle util applied to track/episode/card/mini-player titles so distinguishing tails (episode numbers, suffixes) stay visible. Adds regression tests for the duration and mini-player fixes. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>	2026-07-01 21:52:27 +02:00