c1425682302d6e6ea9f82dbf4ea8cff48645f281
93
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 dtourolle
|
c142568230 |
fix(player): make transport reach the player that is actually rendering
Play/pause did nothing on the Android native video path — from the on-screen tap, from the control bar, and from a direct player_toggle invocation — while seek and skip kept working. That asymmetry was the whole clue: seek decides in player_seek_video, transport decides in toggle_playback. DR-195 is the cause. `html5_playing` is Rust's record of "a webview <video> is active and in this state", and toggle_playback/play/pause all route transport to that element whenever it is set. The player route mirrored element state into it UNCONDITIONALLY — from handleReportStart and, fatally, from handleReportProgress, which VideoPlayer calls on a 10-second interval. So on the native path the frontend re-declared every ten seconds that an element was playing when none existed, and every transport intent was emitted into the void. It also explains the flashing: the control bar and the JRay overlay both key off isPlaying, which was being contradicted on every tick. The mirror now lives in mirrorElementStateToRust() in VideoPlayer, gated on useHtml5Element — the only place that knows whether an element renders at all. The route cannot tell the paths apart, which is exactly how it came to lie. DR-193 hands transport authority back to the native backend when an item loads into it. Necessary but insufficient alone: the progress interval put the flag straight back, which is why the first device test after it still failed. DR-192 presents native video through a TextureView instead of a SurfaceView. A SurfaceView renders on its own layer outside the app window and punches a transparent region through it, and everything drawn above that hole — here, the entire Svelte UI — depends on that composition path. The overlay dropped its incremental damage: the DOM advanced (slider 476 -> 479 across three seconds) behind a screen showing neither, so the progress bar froze, controls would not fade and rotation lost the transport UI, while structural DOM changes got through, which is why the play overlay always appeared to work. It supersedes DR-191, which forced redraws in a loop and treated the symptom. DR-194 hides the video view across a resize and reveals it two frames later. A TextureView retains its last frame, so between a rotation and the re-fit landing that frame is stretched across the old rect and the previous frame flashes in what should be the letterbox bars. Verified on device (Honor ROD2-W09, Android 16) by driving ADB and reading the live DOM over the devtools socket: surface tap pauses (position frozen across 12 seconds, overlay raised, transport flipped) and resumes; the control bar does both. UT-189 drives the real 10-second interval under fake timers — an earlier version asserted on a freshly mounted player, passed with the guard deleted, and guarded nothing. Still open, and deliberately not claimed: DR-192's effect on the overlay repaint is unverified on device, DR-194's letterbox reset is untested, and the native default (DR-188) stays off pending DR-190, the background-audio return. |
||
|
dtourolle
|
95129d04a3 |
fix(player): make Android native video actually visible, and usable
DR-172 reverted native video to opt-in after it shipped as audio with no picture, naming the compositing as the suspect. The compositing was fine. Five separate defects sat between ExoPlayer and the screen, each able to produce that exact symptom on its own, and each invisible to the others. DR-185 — the app shell painted over the surface. app.css clears the page's opaque layers through three selectors, one of which targets `[data-app-shell]`, an attribute NO component has ever set, in any commit. The shell paints --color-background across the whole viewport and VideoPlayer stacks above it, so the WebView composited opaque no matter what else was cleared. Invisible three ways over: the CSS is valid, the selector is plausible, and a rule matching nothing looks exactly like a rule matching something already transparent. DR-182 — nothing could lift the poster card. Every markMediaReady() call site is an HTML5 <video> event, and the native branch renders no element, so the black title card covered the surface for the entire session. The first fix hooked `player://position-update` / `player://state-changed`; those channels are never emitted by the backend, so it passed a test that fired them by hand and did nothing on a device. Driven from the player store now, as the seek bar already was. DR-183 — the JS bridges raced the page load. Installed 500ms after onCreate by walking the view tree, while WebView binds injected objects at page-load time, and the identity guard then declined to re-inject forever. setTransparent(true) could never arrive. Installed from WryActivity.onWebViewCreate instead, which wry calls immediately before the first loadUrl. DR-184 — the SurfaceView was never detached. detachVideoSurface had no callers anywhere, mirroring the DR-151 defect: every native video left its surface parented to the content view and the next one stacked another beneath it. DR-191 — the overlay stopped repainting. Incremental damage (the clock's text, the control bar's opacity) never reached the screen while structural changes did, so the progress bar froze, the controls would not fade, and the play overlay appeared to work because it is added and removed from the DOM. Driven from the Activity via postInvalidateOnAnimation while compositing is on. Two UI defects only this path could reveal came with them: isPlaying froze at its initial value, leaving the play overlay dimming and covering the video (DR-186), and the control bar's auto-hide was armed solely by mousemove, which a touchscreen never fires (DR-189). Immersive mode now applies on entering the player rather than only via the fullscreen button (DR-187). Verified on a device (Honor ROD2-W09, Android 16): logcat carries `WebView transparent = true` and `Marking media ready` with video on screen — the pair DR-172 went looking for and could not find — and skip, seek, rotation and subtitle rendering were exercised by hand. The default stays OFF (DR-188). Turning it on surfaced a further unverified sub-path: returning from background audio is HTML5-only, so playback stays dead (DR-190, proposed). Shipping it would have repeated DR-161 exactly — a verified sub-path made default over an unverified one. |
||
|
dtourolle
|
c0c6c5023e |
fix(player): resume a transcoded video by seeking, not by asking for a stream that starts mid-item
🏗️ Build and Test JellyTau / Run Tests (push) Failing after 5m10s
🏗️ Build and Test JellyTau / Android Compile Check (push) Skipped
Publish Documentation / Build & publish docs to gitea-pages (push) Successful in 5m30s
Traceability Validation / Check Requirement Traces (push) Successful in 19s
A resumed transcode played nothing at all: every segment came back 400, hls.js exhausted its retries and gave up, while the same episode from the beginning was fine. Jellyfin builds each segment URI by echoing the master playlist's query string into it, and its segment handler opens by rejecting any request carrying StartTimeTicks > 0 (ArgumentException → 400). So one resume position on the playlist is copied onto every hls1/main/N.ts and 400s all of them — the `> 0` being exactly why starting from the beginning survived. HLS does not need the parameter: a playlist spans the whole item and asking for segment N *is* the seek. It is removed from the URL builder entirely rather than conditionalised — the builder cannot know whether its response will be segmented — and the position becomes a seek issued once the player has loaded. The progressive /Audio/universal builder behind the background-audio handoff has no segments and keeps its StartTimeTicks, which is why audio-only handoffs resumed correctly and video ones did not. Completing that across the boundary, since the URL no longer starts where the caller asked: - reloadSource(url, position) now means "reload and resume AT this absolute position": it seeks the element once the source is playable and clears the transcode offset to zero. It previously set the offset to the position and seeked nothing, which was correct only while the URL itself began there — left in place it would have shown 20:00 on the scrubber while the opening titles played, with no seek ever happening. - The transcoded resume path in the player page collapses into the same "seek after load" branch direct streams already used. - VideoPlayer's background-audio return does the same: no base, seek to the absolute position. - The stale test asserting StartTimeTicks is present is rewritten to keep its other half (an HLS master playlist, never a progressive stream.mp4, carrying the chosen source and audio track). TRACES: UR-004, UR-005, UR-019, UR-021, UR-074 | DR-181 | UT-182, UT-183 |
||
|
dtourolle
|
5096c01960 |
fix(player): restore the subtitle sidecar work dropped by the previous commit
The previous commit was assembled from a tree read before
|
||
|
dtourolle
|
2d67b0e4f5 |
fix(player): give every transcode its own play session, and stop the one it replaces
Switching bitrate mid-film stalled playback. The server served the new playlist and then rejected its segments: 400 on hls1/main/0.ts, six times over 25 seconds, never recovering, while the UI logged "Streaming quality changed" as if nothing were wrong. Jellyfin keys a transcode job by device and play session. Every stream URL this app built carried the same hardcoded DeviceId and no PlaySessionId at all, so the second stream for an item was indistinguishable from the first and nothing ever stopped the old ffmpeg. Re-opening a stream is not rare — a quality switch, a transcoded seek and an audio-track switch all do it. Replayed against the server, a second stream opened for a live job's item alternates per attempt between serving bytes and 400ing, which is why it read as flaky rather than broken. begin_video_play_session mints a session id per open and reports the one it supersedes; the URL builder stops that job (DELETE /Videos/ActiveEncodings, un-retried — a slow stop must not delay playback) before returning. Putting it in the builder rather than in each caller covers every re-open path by construction. adopt_video_play_session takes ownership of the job the server starts itself when PlaybackInfo answers with a TranscodingUrl: without it the first switch on a stream has nothing to stop and collides with what is playing. Two client faults made the same incident worse and go with it: - The fatal-HLS-error handler added the transcode seek offset to a position that already included it. Past roughly the halfway mark of a film the doubled value cleared the "near end" threshold, so any transient network error was reported as end-of-stream and autoplay skipped to the next item — precisely when a quality switch had just made the offset large. The decision now lives in hlsRecovery.ts, against the absolute position. - The HTML5 reload primitive resolved on its own canplay timeout, so a reload the server never served reported success. The picker showed a quality that was not playing and the caller had nothing to revert. TRACES: UR-074, UR-004 | DR-177 | UT-173, UT-174, UT-175 |
||
|
dtourolle
|
13264e225b |
fix(player): never let the server burn a subtitle in, and never offer one we cannot draw
Reported as "subtitles are shown even when off", and no toggle in the app cleared them — because they were not the app's subtitles at all. The server was painting them into the video. `PlaybackInfo` omitted `SubtitleStreamIndex`, which does not mean "none": the server then honours the source's own default/forced flag. On the reported episode that default is a PGS track — a bitmap, which cannot go out as a sidecar — so the server fell back to `SubtitleMethod=Encode` and composited it onto every frame. Confirmed against the live server, which answered the same PlaybackInfo request two ways: with the index omitted it returned `SubtitleStreamIndex=2` + `SubtitleMethod=Encode` and a `SubtitleCodecNotSupported` transcode reason, and its ffmpeg command carried `[0:2]…[sub];[main][sub]overlay_qsv=…`; with `-1` it selected no subtitle stream at all. The cost landed on the video, not the subtitle: burn-in rules out remuxing, so a stream that only needed its audio transcoded was re-encoded frame by frame. Three parts: - The negotiation asks for `SubtitleStreamIndex=-1` and advertises every text format we can render (srt/subrip/ass/ssa/vtt) as `External`. - The stream URL says the same thing, because the negotiation is not what opens most streams: a quality switch, a transcoded seek and an audio-track switch each rebuild the URL on their own, and an omitted index there lets the server pick the default track back up out of whatever session state it still holds. - The picker offers only subtitles the app can actually draw. Each subtitle stream now crosses the boundary carrying `supports_external_delivery`, decided in Rust where the codec vocabulary belongs, and `None` for anything that is not a subtitle so a `false` cannot be misread as a verdict. `subtitleStreamsOf()` drops the rejected ones — and since that one function feeds the menu, the `<track>` children and the native play request alike, a bitmap track disappears from all three without its URL ever being fetched. Only an explicit "no" hides a track; a stream carrying no verdict behaves exactly as before. Nothing is lost by refusing burn-in: the app already fetches the text tracks and draws them itself (UR-020), so the server's composited copy was always redundant. Image-based tracks are consequently not offered, which is honest rather than a regression — the renderer cannot composite a bitmap, and the old behaviour paid for them by making the whole stream unwatchable. Tests were written first and observed failing: the Rust one would not compile against a field that did not exist, and the frontend one resolved a URL for the PGS track it was supposed to drop. Carries with it the in-flight per-stream `PlaySessionId` work in online.rs, whose hunks sit inside the same request builder and could not be separated from these. TRACES: UR-020, UR-004 | DR-176 | UT-168 |
||
|
dtourolle
|
1a9805f0f3 |
fix(downloads): queue the whole album, and make every queued track findable offline
An album download put a handful of its tracks on the device while the button reported the album as downloaded. Two independent gaps, one shared cause. - `download_album` read its track list from `items WHERE album_id = ?` — the local catalog cache. Jellyfin does not return `AlbumId` on every listing endpoint, so tracks cached from one of those sit in `items` with a NULL `album_id` and are invisible to that query. On the reported database three whole albums (18, 12 and 9 tracks) had it NULL on every track; a partially linked album queued only the linked subset. - The frontend then resolved one stream URL per track from its own list and paired it with the returned row ids by position. The ids came back in the backend's `index_number` order over a different set of rows, so a row could be handed another track's URL and any track past the end of the shorter list was never started. On Android that loop also stopped wherever the webview was suspended. - `album_id` is what `OfflineRepository::get_items` joins a track to its album on, so a track that did download stayed invisible under its album offline — the same missing link seen from the other side. The operation now belongs to Rust end to end: - `HybridRepository::get_album_tracks` asks the server what the album contains. Cache-first `get_items` is right for browsing and wrong for deciding what to download; it errors offline so the caller falls back to the ungated local catalog, keeping the queue-while-offline flow. - `queue_album_tracks` writes the album link onto every track it queues, and creates an `items` row for tracks the cache has never seen. - Stream URLs resolve here, through the existing reconnect resolver, now scoped to the rows just queued so one album cannot start every unrelated pending row. Only the album id crosses the IPC boundary. - `album_file_names` gives each track its own file. A title repeated inside one album (deluxe edition, two discs) mapped to one path, so those downloads overwrote each other. Re-tapping download on a broken album heals it: missing tracks are queued and the tracks already on disk get their link. `download_series`/`download_season` still derive their episode lists from the cache the same way and want the same treatment. DR-173, UT-170..172. Rust 673 tests, frontend 975 tests, svelte-check and check:boundary clean. Note: this tree is shared with a concurrent session. Only the files above are committed; docs/traceability.md is left to be regenerated once that work lands. |
||
|
dtourolle
|
82b6982d68 |
fix(player): use a speedometer icon for the streaming quality selector
The bitrate ceiling button reused a cloud-download glyph, which read as a download action rather than a bandwidth setting. |
||
|
dtourolle
|
3363ff7f08 |
Merge branch 'master' into worktree-mosaic-library
# Conflicts: # scripts/extract-traces.test.ts |
||
|
dtourolle
|
f46d7bf676 |
fix(player): make native Android video opt-in again — it shipped as audio with no picture
Publish Documentation / Build & publish docs to gitea-pages (push) Canceled after 0s
🏗️ Build and Test JellyTau / Run Tests (push) Failing after 4m55s
🏗️ Build and Test JellyTau / Android Compile Check (push) Skipped
Traceability Validation / Check Requirement Traces (push) Successful in 20s
DR-161 flipped experimentalNativeVideo on by default so picture-in-picture could shrink a real video surface. On a device that shipped sound with a blank screen. The decode path was never at fault. Logcat shows ExoPlayer running and feeding a live SurfaceView with an active BufferQueue. The compositing was: the SurfaceView sits behind the WebView, and the step that clears the opaque layers above it never took effect — `WebView transparent = false` is logged, `= true` never appears. The video was rendering correctly the whole time, behind an opaque page. This is precisely the defect the flag existed to contain; VideoPlayer.scrubRegression.test.ts had already recorded that "the native SurfaceView has never been visible through the webview". Enabling it by default shipped a verified decode path on top of an unverified display path. Reverting costs nothing that matters: PiP does not depend on it — DR-160 drives PiP from the WebView <video> — and working video outranks PiP showing a native surface. The flag stays in Settings, now described as incomplete rather than as a performance win, so anyone helping test it still can. Fixing the compositing is the prerequisite for trying this default again (DR-172). |
||
|
dtourolle
|
7e1f0e0547 |
Merge branch 'master' into worktree-mosaic-library
# Conflicts: # docs/traceability.md |
||
|
dtourolle
|
e015c4c9b1 |
Merge branch 'master' into worktree-mosaic-library
Renumbers the mosaic's requirement IDs out of the way of the download work that landed on master in parallel: it had already claimed DR-163/DR-164 and UT-162, so the mosaic layout is now DR-172, the library favourites scope DR-173, and its composition test UT-167. Note for the download branch: its UT-162..UT-165 rows trace to DR-163..DR-166, none of which are defined in requirements.md — that branch defined DR-167..171 instead. Those references are orphaned and want a look; nothing here touches them. |
||
|
dtourolle
|
7387f35c7e |
docs(player): correct the stale "native video defaults to off" comments
DR-161 made `experimentalNativeVideo` default to on, but three comments still described the pre-flip world and one of them was load-bearing: - `nativeVideo.ts` labelled the store "Default off" directly above a `load()` that returns true when nothing is stored. - The two PiP comments explained themselves as "what makes PiP work in the shipping configuration", which stopped being true when Android started shrinking the real ExoPlayer surface. They still describe the Linux path and the flag-off case, so they say that instead. - `video_audio_codecs` justified its narrow codec list with "video does not play through ExoPlayer", which is no longer so on Android. The narrow list is still right, for a different reason now recorded: the flag is a user setting and a download outlives it, so only the intersection holds on both sides of the switch. DR-171 carries the same caveat. No behaviour change. |
||
|
dtourolle
|
0861523015 |
feat(library,home): lay libraries out as a mosaic, with favourites per category
The library overview and the home shortcut strip showed artwork of three different shapes — square music covers, 16:9 library backdrops, 2:3 posters — in grids that pick one box and crop everything to it. The home strip said so in a comment: it forced `aspect="video"` on music libraries so the row would line up, which lined it up by cutting the covers down. Both surfaces are now justified mosaics: rows share one height and each tile is as wide as its own artwork. `layoutMosaic` is a pure module — it packs tiles until the height needed to fill the container drops to the target, justifies the row by absorbing the rounding remainder into its widest tile, and deliberately leaves the last row unstretched so one leftover tile does not inflate into a banner. The component supplies only what the DOM knows: the measured container width, and the artwork's *decoded* aspect ratio (via a new `onNaturalSize` on CachedImage), committed in one debounced batch so the grid does not reshuffle once per image as artwork lands. Favourites gain a tile per category beside the library it belongs to, alongside the existing cross-library entry. Which collection type maps to which category is Jellyfin vocabulary, so it is derived in Rust — `SearchScope::for_collection_type`, stamped onto every `Library` by a new constructor and carried over as an optional `favoritesScope`. Deriving it in Svelte would have rebuilt the exact leak `SearchScope::item_types` was extracted to close. A category shows one tile however many libraries share it, and a library kind favourites do not carve up (Live TV, channels, books) gets none. Also corrects the requirements-count test, which the UR-074 commit left one behind. Spec: docs/specs/library-mosaic.md TRACES: UR-075, UR-067 | DR-163, DR-164 | UT-158..UT-162 |
||
|
dtourolle
|
d49d027020 |
docs(player): allocate UR-074/DR-162 for the streaming bitrate cap
🏗️ Build and Test JellyTau / Run Tests (push) Failing after 5m10s
🏗️ Build and Test JellyTau / Android Compile Check (push) Skipped
Publish Documentation / Build & publish docs to gitea-pages (push) Successful in 5m27s
Traceability Validation / Check Requirement Traces (push) Successful in 16s
The feature shipped tagged against DR-160, which a parallel session had claimed for picture-in-picture in the meantime. Renumbered to DR-162 across the Rust and frontend TRACES comments (the PiP tags in VideoPlayer.svelte, pictureInPicture.ts and nativeVideo.ts keep DR-160) and regenerated bindings.ts. Adds the requirement rows the tags point at: UR-074 for the user need, and DR-162 covering why the cap has to reach the PlaybackInfo negotiation and not only the transcode URL, why the ceiling is process-wide, and why the Settings default persists while the in-player override does not. Notes that this gives UR-070 its resume-at-the-same-point mechanism while the server-offered rendition list that requirement also asks for stays proposed. UT-156/157 record what the tests pin. docs/specs/streaming-bitrate-cap.md carries the layer assignment — the step definitions, the video/audio split, the resolution pairing and the reload decision are all Rust; the frontend holds a serde token and the labels it was handed. TRACES: UR-074 | DR-162 | UT-156, UT-157 |
||
|
dtourolle
|
dda2ff86a3 |
feat(player): cap streaming bandwidth with a user-chosen bitrate ceiling
Video streams were opened at a fixed allowance nobody could change: MaxStreamingBitrate=20000000/VideoBitrate=18000000 on the HLS transcode URL, 20 Mbps in the PlaybackInfo negotiation, and a 999999999 device profile that let the server direct-play a source of any size. On a metered or slow connection there was no way to spend less. StreamingQuality is a ladder of bandwidth ceilings — Original, 20/10/8/ 4/2/1 Mbps and 720 kbps — where a step bundles the total ceiling, the audio share of it and the resolution that budget can carry. Those numbers are Jellyfin encoding vocabulary, so they live in Rust and the frontend only names a variant; labels and details come back over IPC from player_get_streaming_qualities, the same arrangement as the EQ presets. The cap has to reach the *negotiation*, not just the transcode URL: max_static_bitrate in the device profile is what makes the server refuse to direct-play a file fatter than the cap, and without it a 30 Mbps remux is handed over untouched and every URL parameter downstream is moot. So it is applied at all four places that decide bandwidth — the HLS URL builder, PlaybackInfo, the Live TV stream, and the background-audio handoff (which takes the lower of the cap and its own 384 kbps). Video bitrate is the total minus the audio share so the two together honour the ceiling rather than overshooting it. The ceiling is process-wide rather than a repository field: it is a preference about this device's connection, must survive a repository rebuilt on re-login, and every URL builder plus the negotiation have to agree on it or the cap leaks. Same shape as INCLUDE_CATALOG_BROWSE. Two ways in. Settings holds the durable default, persisted to app_settings and restored at startup — unlike the rest of VideoSettings, because a limit set for a metered connection that silently reverts to uncapped on the next launch spends the user's data with no changed setting to see. The in-player menu is the "this film, this connection" override: a cap is a property of the stream the server is producing, so it cannot apply to one already in flight — player_set_stream_quality re-opens the stream at the new quality and resumes at the current position, reloading the native backend itself and handing HTML5 a URL for the same reloadSource primitive the audio-track switch uses. Tests pin the URL parameters at a capped and an uncapped step, the handoff taking the lower of the two, the ladder's internal consistency (video + audio == cap, resolution descending with bitrate) and the persisted token's round trip. The ceiling is process-wide, so the tests that depend on it serialise on a guard that restores the default. TRACES: UR-074 | DR-160 | UT-156, UT-157 |
||
|
dtourolle
|
9f5f57cba4 |
fix(ui,player): scroll restore, immersive fullscreen, watched toggle, handoff timeline, PiP
Batch of reported bugs and enhancements. UI - Pages no longer inherit the previous page's scroll position (DR-156, UR-072). The shell keeps its scrollers alive across navigation by design, so the element never remounts and its scrollTop survived the route change; SvelteKit restores window scroll, which this app never uses. ScrollMemory records the offset per route and per container: forward moves reset to the top, Back restores where the route was left. - Season header stacks on narrow screens, and the title span gets min-w-0 so it actually truncates instead of overflowing under the action buttons. - Favourites gets a labelled tile at the head of the library grid rather than only an unlabelled heart icon in the header. Playback - Full-screen video on Android hides the system bars (DR-157, UR-066). requestFullscreen() cannot touch the Activity window from inside a WebView, so the control did nothing visible while the bars stayed painted over the video. ImmersiveModeBridge hides them, restored on exit, Escape and teardown. - Background-audio handoff stops leaking its relative timeline (DR-159). background_audio_base was a display-only correction applied in two places while progress reports to Jellyfin, the frontend and media3's own seeks all worked in the relative timeline treating it as absolute — each crossing losing exactly `base` seconds. The conversion now happens once, in the position tick, and inbound seeks resolve through seek_absolute, which re-opens the stream at the requested position because the handoff transcode cannot seek. - Picture-in-picture works on the path that actually plays video (DR-160). canEnterPip demanded a native ExoPlayer surface, but that path is behind a flag defaulting to off, so PiP could never engage. It now accepts the WebView <video> too, keeping the WebView visible and routing play/pause to the element. - Native video is now the default so PiP has a real surface (DR-161). The scrub-regression tests pinned the flag-off path implicitly; they now mock it off explicitly. The native scrub/seek path is not covered by the suite and needs device verification. Watched state - Watched toggle on the episode row, season header, series and movie hero, and the Episode Focus View (DR-158, UR-073). Both backend halves already existed with no caller. storage_set_watched covers a container's episodes so the toggle is honest offline, and QueuedOp::MarkUnplayed gives the sync queue the missing direction. Release - Fix the Android versionCode floor (set-version.sh). v0.5.2 shipped code 5002 under an earlier minor*1000 scheme, but the current minor*100 formula yields 1502 for that version and 1503 for 0.5.3 — so every 0.5.x release built from it was an un-installable downgrade for anyone already on v0.5.2. Widened to 10000 + major*1000000 + minor*1000 + patch (0.5.3 -> 15003). - Bump to 0.5.3. |
||
 dtourolleandClaude Opus 5
|
1f32e4040b |
Merge branch 'fix/home-library-card-heights' from origin
Local and remote had both advanced two commits from
|
||
|
dtourolleandClaude Opus 5
|
2d50744320 |
fix(player): resume at saved position on the Android native path
The native (ExoPlayer) video path never applied the resume position, so "resume from where you left off" always played from the start on Android. Two layers each assumed the other did the seek: - The only code acting on `initialPosition` was handleCanPlay, an HTML5 <video> event handler. The native path has no <video> element, so `canplay` never fires and that seek never ran. - NativePlayerAdapter.load() had an initialPosition branch, but it only recorded the number, claiming "the native backend performs the actual seek internally". It does not: PlayItemRequest carries no start position, and loadWithMetadata -> prepare() always starts ExoPlayer at 0. - VideoPlayer never called adapter.load() at all, so even that branch was unreachable. The frontend therefore believed it had resumed (the seek bar showed the resume point) while ExoPlayer played from the beginning. NativePlayerAdapter.load() now issues the backend seek, excluding live streams (no resume point; seeking knocks the HLS window off its live edge). VideoPlayer calls it on the native branch and marks the initial seek as performed so the existing $effect does not fire a duplicate. The HTML5 path is untouched: seeking before metadata is clamped to 0, which is exactly what handleCanPlay waits for. Verified red->green: the new test failed with "Number of calls: 0" before the fix. Full frontend suite passes (933 tests); svelte-check and check:boundary are clean. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
85bd227714 |
fix(home): uniform card heights in the Your Libraries row
MediaCard derives its artwork aspect ratio from the item, so a music library rendered aspect-square (144px tall at w-36) next to video libraries at aspect-video (81px), leaving the home row ragged. Add an optional `aspect` prop that overrides the derived ratio, and pass aspect="video" from the home Libraries strip. Unset, behaviour is unchanged, so the /library overview grid and the media carousels keep their per-type ratios. Artwork already uses object-cover, so square music art crops rather than distorts. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolleandClaude Opus 5
|
e144e62b31 |
feat(player): render Android video natively behind a transparent webview (DR-150, DR-151, DR-152)
Rust already reported `use_html5_element: false` on Android, but two frontend overrides threw that answer away, so ExoPlayer's video path had never actually run. Both are lifted behind an `experimentalNativeVideo` opt-in (default off). The flag is a suppressor, never a promoter: off forces HTML5 even where Rust says native, so an in-progress spike cannot ship as the default, but it can never select native where Rust reported HTML5 — Linux cannot composite behind WebKitGTK, and promoting there would be a black screen. Two blockers the spec did not anticipate, both in code assumed to be merely unreachable rather than broken: - `JellyTauPlayer.setActivity()` had zero callers, so `currentActivity` was always null and `autoAttachSurface()` bailed. The SurfaceView was created and wired to ExoPlayer but never added to the view hierarchy — video would have decoded to a surface that was never on screen, whatever the webview did. This also revives PiP on the video path, which gated on the same flag. - `createAdapter()` was not the real gate; it is never called in production. The actual override was in VideoPlayer.svelte, which forced HTML5 and stopped the native backend `player_play_item` had just started. Both sites now route through `createAdapter()`. Compositing needs two independent opaque layers cleared, not one. Clearing only the page leaves the WebView widget opaque — audio over a black picture, exactly the symptom the old INTERIM comment described. `videoSurface.ts` toggles both: the widget background and window drawable from Kotlin, the page backgrounds via a `data-native-video` attribute keyed by app.css. Transparency lives in `tauri.android.conf.json` so Linux keeps an opaque window, and is scoped to the playback session so the launcher never shows through the rest of the app. Phase 3's rect plumbing turned out to be unnecessary: video is fullscreen on the player route, and `fitSurfaceToScreen()` already letterboxes and re-fits on rotation. The mini-player transition remains unverified on device. Also removes the `navigator.userAgent` sniffing in webviewAudio.ts, which was a second copy of the Rust cfg gate free to drift from it. `player_get_capabilities` now reports `usesWebviewAudio` and `supportsNativeVideo` from those same gates. Tests: adapter selection covers the full matrix, including the regression guard that the flag off beats Rust. Written first and confirmed failing (2 of 7) before the fix. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
dtourolle
|
6a712c46cb |
fix(player): send subtitle tracks to ExoPlayer on Android (UR-020)
Selecting a subtitle on Android did nothing. The Kotlin side has been
complete for a long time — JellyTauPlayer.load() parses a subtitles JSON
array into MediaItem.SubtitleConfigurations and setSubtitleTrack() drives a
TrackSelectionOverride — but nothing ever reached it.
VideoPlayer built the list and then threw it away: it resolved every
subtitle stream's URL into a subtitleTracks array and the
commands.playerPlayItem({...}) call two lines below passed only streamUrl,
title, id, videoCodec and needsTranscoding. PlayItemRequest had no subtitle
field to put them in, so create_media_item hardcoded subtitles: vec![],
android/mod.rs serialized "[]" across JNI, and every MediaItem reached
ExoPlayer with zero SubtitleConfigurations. A later set_subtitle_track then
found no text track groups and logged "Invalid subtitle track index".
PlayItemRequest now carries the tracks (defaulted, so the background-audio
handoff and next-episode callers are unchanged) and create_media_item
threads them onto the MediaItem.
Serialization: SubtitleTrack is reused verbatim rather than given an
IPC-specific twin, and deliberately keeps snake_case. The same struct feeds
two consumers that both spell mime_type — the JNI JSON that
JellyTauPlayer.load() reads with optString("mime_type"), and the generated
binding the frontend types against. camelCasing it would not fail the build
or the IPC; Kotlin would silently fall back to its default MIME type for
every track. UT-146 asserts the exact serialized keys so a future
rename_all cannot pass unnoticed.
The index mapping was NOT already correct. setSubtitleTrack(n) indexes
ExoPlayer's filtered text track groups, i.e. the position of the sideloaded
configuration — but the menu passed its own {#each} row number, which counts
every subtitle *stream*, including ones whose URL failed to resolve and were
therefore never sideloaded. One failed URL and every track below it selected
the wrong subtitle. The position is now looked up in the exact array that
was sent (nativeSubtitleArrayIndex), and a stream that was never sent maps
to "off" rather than to a guessed position.
The resolution loop also reuses resolveSubtitleTracks() from the Linux fix
instead of duplicating it, which fans the URL requests out in parallel
rather than awaiting them one per stream before playback can start. The
awaits are safe where they sit: the native-mode pitfall is about Svelte
lifecycle calls after an await, and nothing is registered here — the
background-audio subscriptions above still run synchronously.
No Kotlin change was needed.
Tests (UT-145, UT-146, UT-147) were written first and failed: PlayItemRequest
had no subtitles field to compile against, nativeSubtitleTracks and
nativeSubtitleArrayIndex did not exist, and the playerPlayItem call carried
no subtitles key.
TRACES: UR-020 | IR-016, JA-008 | UT-145, UT-146, UT-147
|
||
|
dtourolle
|
211792947d |
fix(player): render subtitle tracks on the Linux HTML5 path (UR-020)
Selecting a subtitle on Linux did nothing. VideoPlayer rendered no <track>
children at all — the block was commented out as "temporarily disabled to
debug playback issues" (it has been that way since the POC) — so
Html5PlayerAdapter.selectSubtitle() walked an empty textTracks list and the
menu, which is built from media.mediaStreams, was purely decorative.
The reason it had to be disabled is still visible in the dead markup:
getSubtitleUrl() is async, so src={getSubtitleUrl(track.index)} bound a
Promise to the attribute and every track pointed at "[object Promise]" — an
unloadable resource hanging off the media element.
Subtitle URLs are now resolved off the render path into component state
(subtitleTracks.ts), and only streams whose URL actually resolved are
rendered; a per-track failure drops that track instead of emitting a dead
src. data-stream-index is kept, since that is what the adapter matches on.
Subtitles stay OFF unless the user asks for them: the server's isDefault flag
is shown in the menu but is never promoted to a selection, and the `default`
attribute is deliberately not emitted. A <track default> auto-shows, so the
menu would open on "Off" while subtitles were burned over the picture, and
every user who never wanted subtitles would suddenly get them. That matches
the existing initial state (selectedSubtitleIndex = null).
Selection and rendered tracks are reconciled whenever the list changes: a
selection that no longer resolves collapses to "Off", and a surviving one is
re-applied after the new <track> elements exist. "Off" disables every text
track, as before.
Cross-origin text-track fetches use the media element's CORS setting, so the
element opts in with crossorigin="anonymous" — but only for an http(s)
stream, never for a local/offline file:/asset: source, where forcing CORS
onto the video fetch could break playback. It is keyed on the subtitle stream
count, known at first render, so the attribute cannot flip under an in-flight
media load.
Android/native is untouched: the ExoPlayer branch still goes through
player_set_subtitle_track.
Tests (UT-143, UT-144) were written first and failed against the old markup:
the commented-out block, the Promise bound to src, and the default attribute.
TRACES: UR-020 | DR-023 | UT-143, UT-144
|
||
|
dtourolle
|
1b70926c36 |
feat(offline): play downloaded video, and drain the offline sync queue (0.4.6)
🏗️ Build and Test JellyTau / Run Tests (push) Successful in 20m34s
Publish Documentation / Build & publish docs to gitea-pages (push) Successful in 6m6s
Traceability Validation / Check Requirement Traces (push) Successful in 18s
Build & Release / Run Tests (push) Successful in 20m26s
🏗️ Build and Test JellyTau / Android Compile Check (push) Successful in 10m3s
Build & Release / Build Linux (push) Successful in 37m59s
Build & Release / Build Windows (push) Successful in 23m0s
Build & Release / Build Android (push) Successful in 40m26s
Build & Release / Create Release (push) Successful in 1m20s
Bundles this session's work plus the concurrent search/offline/player changes.
Every gate passes on the combined tree: 885 frontend tests, 610 Rust tests,
clippy clean, boundary clean, trace coverage 86%.
Offline video playback — four separate defects, each of which alone stopped it:
DR-133 A completed download's file_path is already absolute (the worker
rewrites it on completion), but the player rooted it a second time and
handed the webview /data/user/0/app//data/user/0/app/videos/x.mp4.
DR-134 The asset protocol was never enabled: no protocol-asset feature and no
assetProtocol config, so convertFileSrc produced URLs nothing answered.
Also silently defeated the cached-thumbnail path, which fails soft to
the server copy and hid it whenever the server was reachable.
DR-137 Tauri's asset protocol answers a range-less request by reading the
whole file into memory, and only advertises Accept-Ranges from inside
its range branch, so the first request never learns ranges exist.
Chromium gave up with PIPELINE_ERROR_READ after ~31s. Local media is
now served by a loopback HTTP server: bounded 4 MiB chunks streamed
from the file handle, every response length-delimited, and a range-less
request answered with one chunk rather than the file. Confined by a
per-session token and to the app data directory, because loopback is
shared between apps on Android.
DR-138 Release builds set usesCleartextTraffic=false, so Android rejected the
request to that server before any I/O. A network-security-config
exempts 127.0.0.1 only; a remote server must still be HTTPS.
Downloads:
DR-135 download_item never records media_type and the reconnect resolver read
that NULL as 'audio', so a movie queued from a media card had its URL
resolved by get_audio_stream_url and completed as an audio-only
transcode. The item's own type now decides.
DR-136 Rows already downloaded that way are requeued on reconnect, since
prevention alone leaves them reading "downloaded" and still unplayable.
Known limitation: a download taken at `original` quality is a byte copy of the
source, so it can be any container. One such file is an AVI holding XVID, which
the webview cannot play in any case — the media server serves it correctly and
Chromium refuses it. That needs either a transcoded download preset or the
native ExoPlayer surface work, and is not addressed here.
Also fixes two ID collisions between concurrent work: DR-143 defined twice
(search vs offline gate) and UT-131 defined twice (Episode Focus hero vs channel
cap). The search requirement is now DR-147 and the channel-cap test UT-141, with
their code references and matrix rows updated.
|
||
|
dtourolle
|
878ac5fa59 |
fix(player): make lockscreen transport reach background audio (DR-097)
Pausing from the lockscreen did nothing while a video's audio played in the background. The handoff starts native ExoPlayer audio and only then tears the WebView <video> down, and that teardown fires a DOM `pause` the frontend reports like any other — leaving html5_playing = Some(false). Transport therefore stayed aimed at the element: the lockscreen pause emitted a ControlCommand into a <video> that no longer existed while the native player carried on. The controller now tracks a background-audio handoff explicitly. Entering one hands transport authority to the native backend and drops the dying element's state/position/media-loaded reports, which also stop flipping the UI to paused and dragging the position backwards. Exiting restores the element as the player. A lockscreen pause also has to survive the return to the foreground: the video used to resume from a snapshot taken at handoff time, undoing the pause on the way back in. shouldResumeOnForeground() lets an explicit `paused` from the player override that snapshot. TRACES: UR-040, UR-005 | DR-052, DR-097 |
||
|
dtourolle
|
62873cab3d |
feat(search): answer search from a local index; tier downloads by lifetime
Search's instant leg read only downloaded items, so with no downloads it returned nothing and every keystroke fell through to a full Recursive=true server query. It now reads the whole synced catalog through the same availability CTE get_items uses, gated on the same include_catalog_browse flag so search and browse cannot diverge. (UR-065, DR-108) Also fixes three defects found while confirming that: - items_fts grew by a full duplicate index every catalog pass. INSERT OR REPLACE fires no AFTER DELETE trigger without recursive_triggers, so the old index row was orphaned, and a TEXT PRIMARY KEY meant the replacement took a fresh rowid and inserted a second entry. Now a real upsert, with migration 021 rebuilding existing indexes. (DR-110) - DELETE FROM items existed nowhere, so server-side deletions never propagated. Adds a post-crawl mark-and-sweep, scoped to crawled types, skipping downloaded items, and refusing to run after a partial crawl because items.parent_id cascades. (DR-110) - The index omitted MusicArtist, Playlist and People, which search groups results by. Adds them plus people_fts (migration 022). (DR-111) Re-indexing moves from a frontend startup call to a Rust background task with a 6h TTL, so a long session no longer searches a stale catalog and a restart no longer forces a crawl regardless of freshness. (DR-109, IR-030) Downloads gain a lifetime tier. Eviction selected every completed row by age with no download_source filter, so hitting the storage limit deleted the oldest download -- typically one saved deliberately for offline -- to make room for a precached track. It now reclaims only 'auto' rows, and expired ones are reclaimed first, before live cache is evicted. (DR-126, DR-127) Downloaded video and audio-only handoffs now play from disk instead of streaming; the video path had never consulted downloads at all. No transcode is involved: MPV runs video=no and ExoPlayer has no surface for an Audio item. (DR-123 in part, DR-128) FTS queries are built as quoted phrases so apostrophes, hyphens and slashes are data rather than operator syntax, and the item-type filter is bound rather than interpolated. Specs: docs/specs/catalog-index-search.md, docs/specs/read-through-media-cache.md Includes concurrently-developed favourites browsing and background-audio stream-end handling; the two workstreams share offline.rs, lib.rs and online.rs, so no subset of files builds independently. |
||
|
dtourolle
|
c55ff45692 |
fix(android): clear the system bars and display cutout (UR-066)
The bottom nav rendered under the Android navigation bar, and full-screen
playback controls spilled into unusable screen edges. It looked device-specific
(Motorola bad, Fairphone fine) but every device was equally unpadded — only the
intrusion differed: a tall opaque 3-button bar swallows the nav, a thin
translucent gesture pill overlaps harmlessly.
None of the app's safe-area handling was ever active, for two independent
reasons:
1. app.html had no `viewport-fit=cover`, so every `env(safe-area-inset-*)`
resolved to 0px — the padding in app.css and BottomUi was a no-op.
2. Android WebView maps only the *display cutout* into `env()`; the status bar
and navigation bar are never reported. With enableEdgeToEdge() and
targetSdk 36 (enforced from 35, opt-out ignored from 36) the WebView always
spans them, so CSS could not learn about them by any route.
WindowInsetsBridge now reads `systemBars() | displayCutout()` and publishes
`--jt-inset-*` CSS custom properties, both pushed on every inset change
(rotation, nav-mode switch, PiP) and pullable via `AndroidInsets.get()` — the
pull is required because the first inset pass lands before the document exists
and a page load wipes the pushed inline style. app.css folds them with `env()`
via `max()` into `--safe-*`, the only thing components may pad from.
Exactly one element owns each edge: the shell takes top/left/right, BottomUi
takes bottom (inside its surface box, so the colour extends behind the gesture
bar), and shellReservesBottomInset hands bottom back to the shell on routes with
no bottom UI. The full-screen players inset their control layers only, leaving
video and artwork edge-to-edge.
The theme's `fitsSystemWindows=true` claimed the opposite of what actually
happened — overridden at runtime, ignored at this target SDK — and is removed.
Also converts six nested `h-screen`/`min-h-screen` boxes to `h-full`: the shell
is `h-screen` *and* inset-padded, so its content box is `100vh - safe-top` and
any nested 100vh box overflows by exactly the inset (the library column would
have clipped its own BottomUi). A test guards against reintroduction.
|
||
|
dtourolle
|
58f2506966 |
feat(series): land on the current episode, not season 1 (UR-062, UR-063, UR-064)
🏗️ Build and Test JellyTau / Run Tests (push) Successful in 16m59s
Publish Documentation / Build & publish docs to gitea-pages (push) Successful in 5m36s
Traceability Validation / Check Requirement Traces (push) Successful in 18s
Build & Release / Run Tests (push) Successful in 5m9s
🏗️ Build and Test JellyTau / Android Compile Check (push) Successful in 8m54s
Build & Release / Build Linux (push) Successful in 18m49s
Build & Release / Build Windows (push) Successful in 14m4s
Build & Release / Build Android (push) Successful in 30m17s
Build & Release / Create Release (push) Successful in 18s
Opening a series dumped the viewer at the top of season 1, and its Play button played nothing at all: it resolved `$libraryItems[0]` — the first *season* by SortName — and navigated to `/player/<seasonId>`, which the player route bounced straight back to `/library/<seasonId>`. The backend could already answer "where is this viewer in this show": `repository_get_next_up_episodes` has accepted a `series_id` since it was written and no caller had ever passed one. Backend (DR-101, DR-106) - `repository/series_progress.rs`: `pick_current_episode` — in progress, else Next Up, else first unwatched, else the premiere. The third rung is the offline path, where Next Up is always empty. `sort_series_order` puts specials (season 0) after the numbered seasons. - `repository_get_series_episodes` takes over the season fan-out and the flat-series fallback, which were domain knowledge living in the frontend. - `clear_watch_history` maps to Jellyfin's mark-unplayed (recursive over a container, also zeroes resume). Offline it refuses rather than diverging state the next sync would undo. Frontend (DR-102, DR-103, DR-104, DR-107) - Seasons collapse; only the current one is expanded, and the current episode is badged and scrolled into view. - Hero button reads `Resume S2E4` / `Play S1E1` and opens that episode's focus view, where Play commits (ux-flows §5B.5). - Seasons are no longer a destination: `/library/<seasonId>` redirects to `/library/<seriesId>#season-N`, and every inbound link follows. - The "More Episodes" strip spans the whole series, so a season finale offers the next premiere instead of dead-ending (§5B.2). - Clear-history buttons on the series hero and each season header. Routes (DR-105) - `/library/tv` and `/library/movies` absorb their all-titles and genres pages as `?view=` tabs; the four legacy routes redirect. 6 video routes become 2, and `/library/shows/genres` stops being the odd one out. Logic extracted to `seriesNavigation.ts`, `episodeStrip.ts` and `libraryView.ts` so it is unit-tested rather than buried in components. Spec: docs/specs/series-current-episode-navigation.md |
||
|
dtourolle
|
a818fee297 |
fix(player): re-entering a video no longer opens the audio player (DR-100)
Leaving a video and returning to it rendered the movie/episode in AudioPlayer. Closing a webview-rendered video deliberately emits no "stopped" state (that would break the autoplay handoff), and the direct-play path does not stop the backend on unmount, so the Rust controller still reported that item as its loaded media. Re-entering the route therefore took the "already playing, just show the UI" shortcut, which returns before a stream URL is fetched, and the render fell through to the audio surface. Mostly visible on Android, where video direct-plays; Linux transcodes and stops the backend on unmount. Both decisions move into playerSurface.ts as pure functions: shouldReuseActivePlayback excludes video, so video always takes the full load path and gets its stream URL and resume position; resolvePlayerSurface maps video-without-a-stream-URL to "pending" (spinner) rather than falling through to audio. |
||
|
dtourolle
|
9d099268b9 |
fix(player): make the video seek bar work by touch (DR-099)
🏗️ Build and Test JellyTau / Run Tests (push) Failing after 6m30s
🏗️ Build and Test JellyTau / Android Compile Check (push) Has been skipped
Publish Documentation / Build & publish docs to gitea-pages (push) Successful in 5m25s
Traceability Validation / Check Requirement Traces (push) Successful in 18s
Build & Release / Run Tests (push) Failing after 6m4s
Build & Release / Build Linux (push) Has been skipped
Build & Release / Build Windows (push) Has been skipped
Build & Release / Build Android (push) Has been skipped
Build & Release / Create Release (push) Has been skipped
On Android, dragging or tapping the progress bar moved the thumb but playback stayed where it was. Two separate defects, both touch-only, which is why the mouse-driven scrub tests never caught either. 1. Gesture hijack. DR-098 taught handleTouchStart to ignore touches that land on a control, but handleTouchMove kept running. It measures against touchStartX/Y, which that early return leaves at the PREVIOUS gesture's values, so a seek-bar drag produced a huge bogus vertical delta: read as a brightness swipe, it dimmed the screen to the 0.3 floor and fired a spurious play/pause "correction" mid-drag. A gesture is now latched at touchstart (playerGestureActive) and touchmove ignores anything unlatched — re-checking the move target cannot recover a start point that was never recorded. 2. Commit signal. The seek was committed only from `change`, which Android's WebView does not reliably fire for a touch interaction on a range input, so the thumb moved to the tapped position and no seek ever ran. touchend/mouseup now commit too; `input` arms a one-shot latch so whichever release signal arrives first commits and the other is a no-op. seekRelative shares the same commitSeek entry point instead of fabricating a synthetic change event. Tests drive the slider with real touch events (UT-089, UT-090) and fail against the pre-fix component. |
||
|
dtourolle
|
b12e99b7e1 |
fix(player): keep double-tap seek working over the play overlay (DR-098)
Publish Documentation / Build & publish docs to gitea-pages (push) Has been cancelled
Traceability Validation / Check Requirement Traces (push) Has been cancelled
🏗️ Build and Test JellyTau / Run Tests (push) Failing after 7m5s
🏗️ Build and Test JellyTau / Android Compile Check (push) Has been skipped
The control-surface guard added in the previous commit killed double-tap-to-seek. The first tap pauses, which renders the full-screen <button> play overlay over the video, so the SECOND tap lands on a button — and the guard discarded it as "a tap on a control". Mark that overlay `data-player-surface`: visually it IS the video, so it must keep taking tap gestures despite being a <button>. The marker wins over the interactive-tag check in isControlSurfaceTouch. Adds VideoPlayer.tapSurface.test.ts, which renders the REAL component and dispatches real touch/click events at whatever element is genuinely on top. This is the gap that let four bugs ship in a row: the pure-unit tests over registerTap/isControlSurfaceTouch/isSynthesizedTouchClick all passed throughout, because each helper behaved exactly as specified — every bug was in the composition, i.e. which element actually receives a tap after Svelte re-renders. Modelling that DOM by hand in a test would just re-encode the same wrong assumption, so these render it instead. The new double-tap test was verified to fail with the fix reverted and pass with it applied, in both directions. |
||
|
dtourolle
|
dc8b732465 |
fix(player): controls bar taps are not player gestures (DR-098)
The bottom play/pause button did nothing. The gesture listener lives on the outer container and touch events bubble, so tapping the button ran handleTouchStart (toggle #1) and then the button's own onclick (toggle #2). The two cancelled out, leaving the control apparently dead. Ignore container-level gestures for touches that land on an interactive control: buttons, links, inputs (the seek bar), or anything inside the controls bar, now marked `data-player-controls`. The rule itself is a pure function over the ancestor chain (isControlSurfaceTouch), so it is unit tested without a DOM. Same root shape as the play-overlay bug in the previous commit: a second click target over the video that the gesture layer did not account for. |
||
|
dtourolle
|
b98a530f48 |
fix(player): guard the play overlay against the synthesized touch click
After the DR-098 tap rewrite, pausing became impossible while unpausing always worked — an asymmetry that pointed straight at the overlay. Pausing renders a full-screen play-overlay button over the video. The compatibility click Android synthesizes from the tap arrives ~30-130ms later, by which time that button exists, so the click lands on the OVERLAY rather than the <video>. Its onclick called togglePlayPause with no guard at all, resuming immediately. Unpausing was unaffected because it removes the overlay, leaving nothing to intercept the click. The suppression rule was only wired into the video element's handler. Extract it as isSynthesizedTouchClick() in tapGestures.ts (unit-tested) and use it from every click target layered over the video, the overlay included. Verified: 724 frontend tests pass, svelte-check clean. Bumped to 0.2.5 so the APK installs over 2004. |
||
|
dtourolle
|
b565c4ae6f |
fix(player): tap gestures act immediately, no deferral timer (DR-098)
Tapping the video surface pause-looped: it would unpause and bounce straight back to paused about a second later. Long-press unpaused fine, which is what pinned it to the tap path rather than the media pipeline. The gesture handler deferred the first tap's play/pause behind a 300ms timer so a second tap could cancel it and seek instead. But the timer callback cleared its own handle *before* invoking the toggle, and handleVideoClick used exactly that handle (`tapTimeout !== null`) to suppress the compatibility click Android's WebView synthesizes after a touch. So the guard was already open when the late click arrived, and it toggled a second time. Replace the deferral with immediate action — there are only first and second taps: 1st tap: toggle play/pause 2nd tap: seek, then toggle play/pause again The second toggle undoes the first, so a double tap seeks while leaving the play state exactly as it was: playing jumps and keeps playing, paused jumps and stays paused. No timer, no window race, no loop. Click suppression no longer depends on the timer: ignore detail === 0 and any click within 700ms of a touch tap, since Android can deliver the synthesized click late and with a real detail value. A swipe now undoes the touchstart toggle (latched on swipeGestureActive so it happens once, not per touchmove frame), keeping brightness swipes from changing the play state. UT-085..087 described the old deferred behaviour and are updated to the new contract. UT-091 is used for the DR-097 facade tests, since UT-089 and UT-090 were already claimed by extract-traces.test.ts. |
||
|
dtourolle
|
a2dbde5492 |
debug(player): log pause reason and flatten the debug tick
An unexplained pause/resume loop was invisible over adb: handlePause logged nothing at all, so only the "playing" half of each cycle showed up, and the 1s debug tick logged an object — which the Android WebView console bridge renders as "[object Object]", discarding every field. Log the element state on pause (readyState, networkState, seeking, ended, plus the component's own isSeeking/isBuffering/handoff flags) and emit the debug tick as a flat string. This is what identified DR-097: the element was fully buffered and healthy at every pause, ruling out a stall and pointing at a competing controller instead. |
||
|
dtourolle
|
98a6bca645 |
fix(player): clamp seeks inside media to stop end-of-stream pause loop (DR-095)
Seeking near the end of a transcoded video locked the player into a stall/pause loop: unpausing or skipping bounced straight back to paused. Both seek paths clamped the target to exactly `duration`. hls.js then requested the segment whose start time lies *past* the end of the media (a 6330.324s item asks for segment 1055, starting at 6336.33s). Jellyfin never produces that segment, the fetch times out, and the gap-controller stalls forever at the last buffered position — retrying ~1x/second and firing an endless stream of AbortErrors as play() lands mid-nudge. Clamp strictly inside the media instead, keeping one segment length (6s) of margin, floored at 0 so short media still seeks to the start. The seek-bar drag path needed this too: its range input `max` is the duration itself, so dragging fully right produced the same dead target. Also bumps the requirement-count fixture for the new DR-095 row. |
||
|
dtourolle
|
d1c01a6bc3 |
feat(player): defer single tap so a double tap doesn't also toggle pause
A tap cannot be classified when it lands — it may still turn out to be the first half of a double tap. Play/pause is therefore deferred until the 300ms double-tap window closes, and cancelled outright if a second tap arrives, so a double tap seeks without also toggling pause. Forward skip moves from 10s to 30s (back stays 10s), for both double tap and the keyboard arrows. The timing rules live in tapGestures.ts so they are unit-testable without mounting the player. Rapid double taps now chain off a still-in-flight seek target instead of all resolving against the same not-yet-updated position. TRACES: UR-005, UR-061 | DR-092 | UT-085, UT-086, UT-087, UT-088 |
||
|
dtourolle
|
5927299c0f |
feat(search): rank results by match quality and split TV/People groups
Neither search backend orders by *where* the query matched, so a mid-word hit could outrank a prefix one — typing "parks" surfaced "Sparks of Love" above "Parks and Recreation". Add `domain/search_rank.rs`, which sorts by match position (prefix → word-start → mid-word substring → no name match), then by media kind so a container outranks its own contents. The sort is stable, so each backend's own relevance still breaks ties it was never overruled on. `repository_search` applies it to both the instant cache result and the merged cache+server union, so the list does not reshuffle when server results land. Ranking lives in Rust because "a better match" is domain vocabulary, not presentation. On the frontend, the combined `tvShows` result group splits into separate Shows and Episodes groups so a show no longer competes with its own episodes for a slot, and a People group is added so searching an actor's name reaches their bio. A stored `tvShows` order expands in place, keeping the position an upgrading user chose for it. |
||
|
dtourolle
|
7650efcb7f |
fix(player): scale video to fill the player viewport
The <video> element used `max-w-full max-h-full`, which only ever shrinks oversized media. A source smaller than the window (480p on a 1080p display) rendered at its intrinsic size — a small picture floating in a black frame. Fill the container and let `object-contain` do the scaling, so the picture fits whichever axis constrains it in both directions while preserving aspect ratio. The sizing rules move to `videoFit.ts` so they are unit-testable outside the component. |
||
|
dtourolle
|
fb967433f0 |
fix(library): populate "More Episodes" for series without season folders
The Episode Focus View's episode strip collapsed to just the current episode on some series. Two causes: - Series that expose episodes directly as children rather than under season folders yielded an empty season fetch, leaving allEpisodes empty. The library page now groups those flat episode children by their season number and synthesizes minimal season headers. - isCurrentEpisode over-matched: episodes with no season/episode number compared equal (undefined === undefined) and every one of them looked like the focused episode. Extracts the strip's pure logic into episodeStrip.ts so both behaviours are unit-tested, per the failing-test-first rule. TRACES: UR-058 | DR-087 |
||
|
dtourolle
|
ee584aced2 |
fix(autoplay): advance to the next episode in background audio mode
An episode handed off to the audio-only path for background playback is a MediaType::Audio item, so autoplay's video-only checks stopped recognising it as an episode: playback simply ended at the episode boundary instead of continuing to the next one. - Carry episode identity (item_type, series_id) through the background-audio handoff so the backend queue item still knows it's an episode; is_episode_item now trusts item_type over the media_type heuristic, and the sleep timer's episode counter follows. - The frontend normally performs the advance by navigating to /player/<id>, which is unavailable while the WebView is suspended. advance_to_next_episode_audio_only drives it entirely in the backend: fetch the next episode, build its audio-only stream URL, and load it into the native audio player, preserving episode identity so the following boundary advances too. - Android's autoplay dispatch routes background-audio episodes to that backend advance and keeps the countdown path for the foreground. - get_audio_only_stream_url_for_video joins the MediaRepository trait (online delegates to the existing builder, offline errors) so the controller can reach it without a frontend round-trip. TRACES: UR-040, UR-023 | DR-052 | JA-032 |
||
|
dtourolle
|
589f08b873 |
feat(home): tap opens detail, long-press plays from home cards
Home carousel cards route a tap to the item's detail / Episode Focus View and a ~500ms long-press to a confirm-then-play flow. MediaCard gains an onLongPress prop with pointer-based detection (cancelled on >10px move so carousel scroll is unaffected, trailing click suppressed). Episode taps route to /library/<seriesId>?episode=<id>; the bare-episode detail page links back to its parent series/season. TRACES: UR-058 | DR-087 |
||
|
dtourolle
|
90f03dd142 |
fix(player): show background-audio button on all Android video playback
🏗️ Build and Test JellyTau / Run Tests (push) Successful in 11m49s
Publish Documentation / Build & publish docs to gitea-pages (push) Successful in 10m18s
Traceability Validation / Check Requirement Traces (push) Successful in 1m2s
Build & Release / Run Tests (push) Successful in 10m46s
🏗️ Build and Test JellyTau / Android Compile Check (push) Successful in 7m16s
Build & Release / Build Linux (push) Successful in 24m59s
Build & Release / Build Android (push) Successful in 33m5s
Build & Release / Create Release (push) Successful in 17s
The audio-only (background-audio) button was gated on the AndroidBackgroundAudio JS-bridge probe, resolved once as a const at mount. The bridge is injected into the WebView asynchronously and races component mount, so on some loads the probe returned false and never recovered, hiding the button on 'some videos' at random. Gate on platform() === 'android' instead (synchronous, stable), matching the convention in VolumeControl. toggleBackgroundAudio() already no-ops if the bridge is momentarily absent. Bump version to 0.0.18. |
||
|
dtourolle
|
514e42fccb |
Merge branch 'frontend-domain-model' into ci-docs-publish-fix
🏗️ Build and Test JellyTau / Run Tests (push) Successful in 8m34s
Publish Documentation / Build & publish docs to gitea-pages (push) Successful in 5m20s
Traceability Validation / Check Requirement Traces (push) Successful in 15s
Build & Release / Run Tests (push) Successful in 5m18s
🏗️ Build and Test JellyTau / Android Compile Check (push) Successful in 4m38s
Build & Release / Build Linux (push) Successful in 17m22s
Build & Release / Build Android (push) Successful in 22m44s
Build & Release / Create Release (push) Successful in 14s
|
||
|
dtourolle
|
9b1c9b3c91 |
feat(settings): rework settings page; remove unused SkeletonLoader/StorageManagement
Settings page refactor plus supporting docs (requirements, ux-flows, traceability) and the frontend-domain-model spec with implementation-status banner. Removes SkeletonLoader and StorageManagement components (no remaining references). |
||
|
dtourolle
|
1968c06172 |
domain: neutral StreamKind for media streams (phase 4d)
Add StreamKind enum (audio/video/subtitle/other) to the domain module with a total stream_kind_from_jellyfin mapper. MediaStream gains a kind field (dual-carry), populated at the mapping seam. Frontend VideoPlayer track/ subtitle selection and the channel-video check now use stream.kind instead of the Jellyfin stream.type string. Rust 456 (+ stream_kinds_map test), frontend 644, check clean. |
||
|
dtourolle
|
ec8a7610f5 |
domain: player/reporting ticks -> milliseconds (phase 4c)
Playback position now crosses the IPC boundary in milliseconds. Ticks survive only inside Rust (DB storage, Jellyfin API) and at the genuine remote-session boundary (session seek / transfer / RemoteControls). Rust command signatures (ms in, converted to ticks internally): - storage_update_playback_progress / _context: position_ms - repository_report_playback_start / _progress / _stopped: position_ms - PlaybackProgress.position_ticks -> position_ms (converted in the query) Frontend: - playbackReporting, playerEvents, VideoPlayer, Queue, player/[id] resume: seconds*1000 / durationMs/1000 instead of tick math. - repository-client + syncService param names -> positionMs. - Tests updated to ms fixtures/assertions. Out of scope (legitimately ticks): NowPlayingItem, PlayState.positionTicks, sessionSeek, playbackModeTransferToLocal, RemoteControls, SessionCard — the remote Jellyfin session API. Rust 456, frontend 644, check clean. |
||
|
dtourolle
|
93d198ce21 |
domain: primaryImageTag -> imageId end-to-end (phase 4a/4b)
Rust: PlayerMediaItem and MergedMediaItem gain image_id (dual-carry), populated from primary_image_tag at every construction/conversion site. Regenerated bindings. Frontend: all catalog + player + merged readers now use imageId. The NowPlayingItem->MediaItem bridge (player.ts) properly maps the remote session's Jellyfin fields (Type, runTimeTicks, primaryImageTag) onto the neutral kind/durationMs/imageId. Types that are genuinely out of scope (Person, NowPlayingItem, PlayItemRequest) keep primaryImageTag. Rust 456, frontend 644, check clean. |
||
|
dtourolle
|
7660a33dfc |
domain: catalog frontend off Jellyfin ticks -> milliseconds (phase 3a)
The catalog surface now speaks milliseconds, the app's neutral time unit.
Ticks no longer reach library/home components.
Rust:
- UserData gains playback_position_ms (dual-carry), populated from ticks
at the offline mapping seam via domain::ticks_to_ms.
Frontend:
- formatDuration(duration.ts) and the two local copies now take ms, not
ticks; all callers pass item.durationMs.
- Progress bars (EpisodeRow, EpisodeFocusView, MediaCard, LibraryListView)
compute playbackPositionMs / durationMs — unit-consistent, no tick math.
- PlaylistDetailView totalDuration sums durationMs.
- duration.test.ts + TrackList.test.ts fixtures updated to ms.
Deferred: player/session/reporting tick math (Queue, SessionCard,
RemoteControls, playbackReporting, playerEvents) — those cross the
storage/Jellyfin command boundary in ticks and need command-signature
changes (phase 3b). Display {item.type} badge -> kind label (phase 4).
Rust 456, frontend 644, check + check:boundary clean.
|
||
|
dtourolle
|
772e9ca6d5 |
domain: flip catalog frontend off Jellyfin item-type strings (phase 2a)
Migrate catalog MediaItem consumers from stringly item.type ("Audio",
"MusicAlbum", …) to the neutral item.kind enum across all classification
logic: home, library detail, player routing, artist/person/related/genre
components, tv store.
Model refinements found during migration (each a real distinction the
flat item_type collapsed):
- MediaKind::LiveChannel — live TV (playable, non-seekable) vs
- MediaKind::ChannelItem — channel VOD leaf (playable, seekable) vs
- MediaKind::Channel — channel container (drill-in).
TvChannel->LiveChannel, non-folder ChannelFolderItem->ChannelItem.
RelatedItemsSection and GenreTags props migrated from Jellyfin type
strings to MediaKind; MediaKind re-exported from api/types.
Deferred by design: display {item.type} text, ResultsCounter labels,
Person.type (role), stream.type (phase 4), and all runTimeTicks/tick math
(coupled to playbackPositionTicks — phase 3). Old fields still dual-carried
so nothing breaks.
Rust 456 + 7 domain tests, frontend 644 tests, check clean.
|