158 Commits

Include renames

Author	SHA1	Message	Date
dtourolle	440d7a01a9	chore(release): 0.6.0 ... Android native video renders a picture, and its transport works. The path shipped once as audio with no picture and was reverted with the compositing named as the suspect. It was not the compositing: five independent defects sat between ExoPlayer and the screen, each able to produce that symptom on its own — the app shell painting over the surface through a CSS rule aimed at an attribute nothing set, a poster card with no way to lift on a path that renders no <video>, JS bridges racing the page load and losing permanently, a SurfaceView that was never detached, and a frontend that told Rust a webview element was playing when none existed, so every play/pause intent was aimed at something that was not there. Native video stays opt-in. Turning it on surfaced a further unverified path — the background-audio return is written only for the webview element — and rotation still needs device confirmation. Minor rather than patch: the player's touch behaviour changes for everyone (the control bar now auto-hides on touchscreens, and the system bars go away with the player), not only for those who opt into native video.	2026-08-16 21:14:08 +02:00
dtourolle	dccb5f53dd	fix(android): stop the rotation cross-fade replaying the old video frame ... Rotating with native video on shows the previous frame flashing in what become the letterbox bars. It reads as a TextureView artefact — the view retains its last frame, so between the rotation and fitSurfaceToScreen() landing that frame sits at the old size — and two fixes were built on that reading: 1. reveal after two postOnAnimation hops. An animation frame is not a video frame; at 24fps the next decoded frame can be several vsyncs away. 2. reveal on onSurfaceTextureUpdated, i.e. when a real frame lands. This meant owning the SurfaceTextureListener and handing ExoPlayer the Surface directly instead of via setVideoTextureView, which installs its own and leaves us blind to frame arrival. Neither stopped the flash. The mechanism is the WINDOW's rotation animation: Android cross-fades a screenshot of the old orientation, that screenshot holds the old video frame at the old size, and nothing at the TextureView level can reach it. The app cannot pre-empt the screenshot either — onConfigurationChanged fires after it is taken. So the animation itself has to go: ROTATION_ANIMATION_JUMPCUT. That was accepted and silently ignored, and the platform said why out loud — "VRI[MainActivity]: setLayoutParams: not fullscreen" — because the attribute is honoured only for a fullscreen window. FLAG_FULLSCREEN is therefore set with it, scoped to while native compositing is active so the rest of the app keeps its normal animation. After the change that complaint is gone from logcat. The frame-arrival reveal is kept: it replaces a fixed-timeout guess with a real signal, and its timeout is required rather than defensive — a resize while paused means no new frame is ever coming, and revealing a stale frame beats a permanently black player. NOT CONFIRMED FIXED on device. The forced-rotation harness (settings put system user_rotation) proved unreliable here, and screenrecord fixes its canvas at start, so a rotation inside a recording never changes frame dimensions — which defeated two separate attempts to measure this. DR-194 is recorded as "Needs device verification" rather than Done.	2026-08-16 18:46:15 +02:00
dtourolle	c142568230	fix(player): make transport reach the player that is actually rendering ... Play/pause did nothing on the Android native video path — from the on-screen tap, from the control bar, and from a direct player_toggle invocation — while seek and skip kept working. That asymmetry was the whole clue: seek decides in player_seek_video, transport decides in toggle_playback. DR-195 is the cause. `html5_playing` is Rust's record of "a webview <video> is active and in this state", and toggle_playback/play/pause all route transport to that element whenever it is set. The player route mirrored element state into it UNCONDITIONALLY — from handleReportStart and, fatally, from handleReportProgress, which VideoPlayer calls on a 10-second interval. So on the native path the frontend re-declared every ten seconds that an element was playing when none existed, and every transport intent was emitted into the void. It also explains the flashing: the control bar and the JRay overlay both key off isPlaying, which was being contradicted on every tick. The mirror now lives in mirrorElementStateToRust() in VideoPlayer, gated on useHtml5Element — the only place that knows whether an element renders at all. The route cannot tell the paths apart, which is exactly how it came to lie. DR-193 hands transport authority back to the native backend when an item loads into it. Necessary but insufficient alone: the progress interval put the flag straight back, which is why the first device test after it still failed. DR-192 presents native video through a TextureView instead of a SurfaceView. A SurfaceView renders on its own layer outside the app window and punches a transparent region through it, and everything drawn above that hole — here, the entire Svelte UI — depends on that composition path. The overlay dropped its incremental damage: the DOM advanced (slider 476 -> 479 across three seconds) behind a screen showing neither, so the progress bar froze, controls would not fade and rotation lost the transport UI, while structural DOM changes got through, which is why the play overlay always appeared to work. It supersedes DR-191, which forced redraws in a loop and treated the symptom. DR-194 hides the video view across a resize and reveals it two frames later. A TextureView retains its last frame, so between a rotation and the re-fit landing that frame is stretched across the old rect and the previous frame flashes in what should be the letterbox bars. Verified on device (Honor ROD2-W09, Android 16) by driving ADB and reading the live DOM over the devtools socket: surface tap pauses (position frozen across 12 seconds, overlay raised, transport flipped) and resumes; the control bar does both. UT-189 drives the real 10-second interval under fake timers — an earlier version asserted on a freshly mounted player, passed with the guard deleted, and guarded nothing. Still open, and deliberately not claimed: DR-192's effect on the overlay repaint is unverified on device, DR-194's letterbox reset is untested, and the native default (DR-188) stays off pending DR-190, the background-audio return.	2026-08-16 18:03:22 +02:00
dtourolle	95129d04a3	fix(player): make Android native video actually visible, and usable ... DR-172 reverted native video to opt-in after it shipped as audio with no picture, naming the compositing as the suspect. The compositing was fine. Five separate defects sat between ExoPlayer and the screen, each able to produce that exact symptom on its own, and each invisible to the others. DR-185 — the app shell painted over the surface. app.css clears the page's opaque layers through three selectors, one of which targets `[data-app-shell]`, an attribute NO component has ever set, in any commit. The shell paints --color-background across the whole viewport and VideoPlayer stacks above it, so the WebView composited opaque no matter what else was cleared. Invisible three ways over: the CSS is valid, the selector is plausible, and a rule matching nothing looks exactly like a rule matching something already transparent. DR-182 — nothing could lift the poster card. Every markMediaReady() call site is an HTML5 <video> event, and the native branch renders no element, so the black title card covered the surface for the entire session. The first fix hooked `player://position-update` / `player://state-changed`; those channels are never emitted by the backend, so it passed a test that fired them by hand and did nothing on a device. Driven from the player store now, as the seek bar already was. DR-183 — the JS bridges raced the page load. Installed 500ms after onCreate by walking the view tree, while WebView binds injected objects at page-load time, and the identity guard then declined to re-inject forever. setTransparent(true) could never arrive. Installed from WryActivity.onWebViewCreate instead, which wry calls immediately before the first loadUrl. DR-184 — the SurfaceView was never detached. detachVideoSurface had no callers anywhere, mirroring the DR-151 defect: every native video left its surface parented to the content view and the next one stacked another beneath it. DR-191 — the overlay stopped repainting. Incremental damage (the clock's text, the control bar's opacity) never reached the screen while structural changes did, so the progress bar froze, the controls would not fade, and the play overlay appeared to work because it is added and removed from the DOM. Driven from the Activity via postInvalidateOnAnimation while compositing is on. Two UI defects only this path could reveal came with them: isPlaying froze at its initial value, leaving the play overlay dimming and covering the video (DR-186), and the control bar's auto-hide was armed solely by mousemove, which a touchscreen never fires (DR-189). Immersive mode now applies on entering the player rather than only via the fullscreen button (DR-187). Verified on a device (Honor ROD2-W09, Android 16): logcat carries `WebView transparent = true` and `Marking media ready` with video on screen — the pair DR-172 went looking for and could not find — and skip, seek, rotation and subtitle rendering were exercised by hand. The default stays OFF (DR-188). Turning it on surfaced a further unverified sub-path: returning from background audio is HTML5-only, so playback stays dead (DR-190, proposed). Shipping it would have repeated DR-161 exactly — a verified sub-path made default over an unverified one.	2026-08-16 15:28:10 +02:00
dtourolle	f0f98feae8	fix(player): strip the burn-in the server puts back into its own transcode URL ... The negotiation asks for no subtitle stream (DR-176), but when PlaybackInfo answers with a TranscodingUrl we played that URL verbatim — and the server built it from its own subtitle verdict. Jellyfin's StreamInfo.ToUrl appends SubtitleStreamIndex and SubtitleMethod whenever it picked a track, so the burn-in we had just declined came straight back through the URL, turning a remux into a full frame-by-frame re-encode. Live TV never declined it at all: open_live_stream sent no index, so the server applied the channel's default track, and broadcast subtitles are DVB bitmaps that NormalizeSubtitleEmbed converts to burn-in on sight. without_server_chosen_subtitle() drops SubtitleStreamIndex, SubtitleMethod, SubtitleCodec and alwaysBurnInSubtitleWhenTranscoding from any URL the server built — matched case-insensitively, as Jellyfin binds query keys — and re-appends the -1 sentinel, because an absent index is not "none", it is "you choose". Applied at both adoption points, plus the sentinel in the live-stream negotiation body and its fallback URL.	2026-08-16 14:56:40 +02:00
dtourolle	d9e1e256e9	fix(auth): trim the username before authenticating ... The login form guarded on `username.trim()` but sent the raw value, so a trailing space from a soft keyboard reached the server verbatim. Jellyfin reports that as an unknown user, which surfaces as a 401 indistinguishable from a wrong password — the user is certain of their credentials and the app insists otherwise. Normalising in AuthManager rather than the form keeps it on the path every caller uses, alongside normalize_url. Only surrounding whitespace is stripped; interior spaces are legal in Jellyfin usernames.	2026-08-16 11:31:34 +02:00
dtourolle	c0c6c5023e	fix(player): resume a transcoded video by seeking, not by asking for a stream that starts mid-item ... A resumed transcode played nothing at all: every segment came back 400, hls.js exhausted its retries and gave up, while the same episode from the beginning was fine. Jellyfin builds each segment URI by echoing the master playlist's query string into it, and its segment handler opens by rejecting any request carrying StartTimeTicks > 0 (ArgumentException → 400). So one resume position on the playlist is copied onto every hls1/main/N.ts and 400s all of them — the `> 0` being exactly why starting from the beginning survived. HLS does not need the parameter: a playlist spans the whole item and asking for segment N *is* the seek. It is removed from the URL builder entirely rather than conditionalised — the builder cannot know whether its response will be segmented — and the position becomes a seek issued once the player has loaded. The progressive /Audio/universal builder behind the background-audio handoff has no segments and keeps its StartTimeTicks, which is why audio-only handoffs resumed correctly and video ones did not. Completing that across the boundary, since the URL no longer starts where the caller asked: - reloadSource(url, position) now means "reload and resume AT this absolute position": it seeks the element once the source is playable and clears the transcode offset to zero. It previously set the offset to the position and seeked nothing, which was correct only while the URL itself began there — left in place it would have shown 20:00 on the scrubber while the opening titles played, with no seek ever happening. - The transcoded resume path in the player page collapses into the same "seek after load" branch direct streams already used. - VideoPlayer's background-audio return does the same: no base, seek to the absolute position. - The stale test asserting StartTimeTicks is present is rewritten to keep its other half (an HLS master playlist, never a progressive stream.mp4, carrying the chosen source and audio track). TRACES: UR-004, UR-005, UR-019, UR-021, UR-074 | DR-181 | UT-182, UT-183	2026-08-16 11:08:42 +02:00
dtourolle	521acc75fd	build(android): add a side-by-side release build for validating R8 ... R8 has broken release APKs here before by stripping the JNI-loaded player and security classes, and the only way to reproduce that was to build with the real signing key and clobber the install you actually use. `./scripts/build-and-deploy.sh release --device --debug` now builds a fully minified release APK — exactly what ships — into the .debug applicationId slot, signed with the local debug keystore: release com.dtourolle.jellytau 0.5.5 release --debug com.dtourolle.jellytau.debug 0.5.5-debug-release debug com.dtourolle.jellytau.debug 0.5.5-debug It shares the applicationId *and* the signature with the plain debug build, so the two replace each other cleanly rather than colliding, and the versionName suffix says which is currently installed. No real key is needed, so the side-by-side path deliberately skips write-keystore-properties.sh. The flag reaches Gradle as JT_SIDE_BY_SIDE=1. CI never sets it, and the release manifest merges byte-identical without it — verified both ways through processUniversalReleaseMainManifest. deploy-android.sh and build-and-deploy.sh learned the flag too, since the APK path is unchanged but the package to launch is not.	2026-08-16 10:42:59 +02:00
dtourolle	2cc39cd7fd	build(android): install the debug build alongside release as its own app ... Testing a debug build meant uninstalling the real one first: same applicationId signed with a different key is INSTALL_FAILED_UPDATE_ INCOMPATIBLE, so every experiment cost the app's settings, credentials and offline cache. The debug build type now carries applicationIdSuffix ".debug" and versionNameSuffix "-debug", so it installs as com.dtourolle.jellytau.debug ("JellyTau Debug", 0.5.5-debug) with its own data directory — two independent apps on one device. Only the *application* id is suffixed. Kotlin classes stay in the `namespace` package com.dtourolle.jellytau, so the JNI loadClass lookups in player/android/mod.rs, the manifest <service> entry and the R8 keep rules are untouched, and the FileProvider authority was already ${applicationId}-relative. Launcher names come from the appLabel / activityLabel manifestPlaceholders rather than resValue, which would collide with Tauri's generated strings.xml; release resolves them back to @string/app_name and merges byte-identical. deploy-android.sh reports the target package and explains an UPDATE_INCOMPATIBLE failure instead of leaving it raw; logcat.sh takes a debug|release argument (it was filtering on com.jellytau.app, a package that has never existed) and attaches by pid when the app is running. Verified: aapt2 badging on the built APK reports com.dtourolle.jellytau.debug / 0.5.5-debug / "JellyTau Debug", and the release manifest merge is unchanged.	2026-08-16 10:36:48 +02:00
dtourolle	e457a9884c	chore(release): 0.5.5	2026-08-16 10:23:38 +02:00
dtourolle	de1c13e72f	fix(player,reporting): report real positions, and count an audio-only episode as watched ... Returning to the foreground before the background-audio stream had started playing handed the frontend 0.0s, so the video reloaded at StartTimeTicks=0 — the episode restarted from the beginning — and the stop report that followed wrote that zero to Jellyfin as the resume point. Caught on device: locked at 18.4s, unlocked 3.5s later with ExoPlayer still IDLE. The base that turns a handoff's relative timeline into the episode's is applied once at the native tick boundary (DR-159), so before the first tick nothing has applied it. The same blind spot covers webview-rendered media, where nothing is loaded into the native backend at all and its position is a permanent 0 — which is why 14 of 14 stop reports in a 35-minute trace were zeroes, one landing 40s after the frontend had correctly reported 15:22 for the same episode. - absolute_position(): the maximum of the backend's reading, the last position webview media reported, and the handoff base. Exact rather than heuristic — at most one term is ever meaningful, and the base is a floor the stream cannot physically be behind. duration() gains the same fallback. - Withhold zero-position stop reports. A zero is never information, and Jellyfin stores the reported position as the resume point, so sending one only ever destroys a real one. - Report progress from the controller's own position ticks, through the 30s throttler it already shared with the native audio path. /Sessions/Playing/Progress was previously requested zero times in 35 minutes. - Report a finished audio-only episode stopped at its runtime before advancing, so Jellyfin's 90% rule marks it played. Nothing else can: the webview is suspended and its <video> was torn down at the handoff. - Split the handoff by source — a downloaded file takes no base and a real seek, a stream keeps its StartTimeTicks base and no seek — and stop routing a downloaded handoff's absolute seek through the stream rebuild, which refuses a non-remote source outright. Reports go through a PlaybackReportSink, which also collapses three copies of spawn-a-task-and-hope into one and is what let each of these be written as a failing test first. TRACES: UR-005, UR-025, UR-040, UR-071 | DR-178, DR-179, DR-180 | UT-176, UT-177, UT-178, UT-179, UT-180, UT-181	2026-08-16 10:23:00 +02:00
dtourolle	5096c01960	fix(player): restore the subtitle sidecar work dropped by the previous commit ... The previous commit was assembled from a tree read before 13264e22 landed, so committing it reverted that commit's changes: the image-based subtitle filtering in device_profile/types, subtitleTracks and its tests, the regenerated bindings, and the VideoPlayer menu wiring. Nothing was lost — the working tree held both changes throughout. This restores those files to the merged state, leaving both the subtitle fix and the play-session fix in place. TRACES: UR-020, UR-004 | DR-176 | UT-168	2026-08-16 10:20:22 +02:00
dtourolle	2d67b0e4f5	fix(player): give every transcode its own play session, and stop the one it replaces ... Switching bitrate mid-film stalled playback. The server served the new playlist and then rejected its segments: 400 on hls1/main/0.ts, six times over 25 seconds, never recovering, while the UI logged "Streaming quality changed" as if nothing were wrong. Jellyfin keys a transcode job by device and play session. Every stream URL this app built carried the same hardcoded DeviceId and no PlaySessionId at all, so the second stream for an item was indistinguishable from the first and nothing ever stopped the old ffmpeg. Re-opening a stream is not rare — a quality switch, a transcoded seek and an audio-track switch all do it. Replayed against the server, a second stream opened for a live job's item alternates per attempt between serving bytes and 400ing, which is why it read as flaky rather than broken. begin_video_play_session mints a session id per open and reports the one it supersedes; the URL builder stops that job (DELETE /Videos/ActiveEncodings, un-retried — a slow stop must not delay playback) before returning. Putting it in the builder rather than in each caller covers every re-open path by construction. adopt_video_play_session takes ownership of the job the server starts itself when PlaybackInfo answers with a TranscodingUrl: without it the first switch on a stream has nothing to stop and collides with what is playing. Two client faults made the same incident worse and go with it: - The fatal-HLS-error handler added the transcode seek offset to a position that already included it. Past roughly the halfway mark of a film the doubled value cleared the "near end" threshold, so any transient network error was reported as end-of-stream and autoplay skipped to the next item — precisely when a quality switch had just made the offset large. The decision now lives in hlsRecovery.ts, against the absolute position. - The HTML5 reload primitive resolved on its own canplay timeout, so a reload the server never served reported success. The picker showed a quality that was not playing and the caller had nothing to revert. TRACES: UR-074, UR-004 | DR-177 | UT-173, UT-174, UT-175	2026-08-16 09:47:27 +02:00
dtourolle	13264e225b	fix(player): never let the server burn a subtitle in, and never offer one we cannot draw ... Reported as "subtitles are shown even when off", and no toggle in the app cleared them — because they were not the app's subtitles at all. The server was painting them into the video. `PlaybackInfo` omitted `SubtitleStreamIndex`, which does not mean "none": the server then honours the source's own default/forced flag. On the reported episode that default is a PGS track — a bitmap, which cannot go out as a sidecar — so the server fell back to `SubtitleMethod=Encode` and composited it onto every frame. Confirmed against the live server, which answered the same PlaybackInfo request two ways: with the index omitted it returned `SubtitleStreamIndex=2` + `SubtitleMethod=Encode` and a `SubtitleCodecNotSupported` transcode reason, and its ffmpeg command carried `[0:2]…[sub];[main][sub]overlay_qsv=…`; with `-1` it selected no subtitle stream at all. The cost landed on the video, not the subtitle: burn-in rules out remuxing, so a stream that only needed its audio transcoded was re-encoded frame by frame. Three parts: - The negotiation asks for `SubtitleStreamIndex=-1` and advertises every text format we can render (srt/subrip/ass/ssa/vtt) as `External`. - The stream URL says the same thing, because the negotiation is not what opens most streams: a quality switch, a transcoded seek and an audio-track switch each rebuild the URL on their own, and an omitted index there lets the server pick the default track back up out of whatever session state it still holds. - The picker offers only subtitles the app can actually draw. Each subtitle stream now crosses the boundary carrying `supports_external_delivery`, decided in Rust where the codec vocabulary belongs, and `None` for anything that is not a subtitle so a `false` cannot be misread as a verdict. `subtitleStreamsOf()` drops the rejected ones — and since that one function feeds the menu, the `<track>` children and the native play request alike, a bitmap track disappears from all three without its URL ever being fetched. Only an explicit "no" hides a track; a stream carrying no verdict behaves exactly as before. Nothing is lost by refusing burn-in: the app already fetches the text tracks and draws them itself (UR-020), so the server's composited copy was always redundant. Image-based tracks are consequently not offered, which is honest rather than a regression — the renderer cannot composite a bitmap, and the old behaviour paid for them by making the whole stream unwatchable. Tests were written first and observed failing: the Rust one would not compile against a field that did not exist, and the frontend one resolved a URL for the PGS track it was supposed to drop. Carries with it the in-flight per-stream `PlaySessionId` work in online.rs, whose hunks sit inside the same request builder and could not be separated from these. TRACES: UR-020, UR-004 | DR-176 | UT-168	2026-08-16 09:47:09 +02:00
dtourolle	041969f446	fix(player): stop the server burning subtitles into the picture ... A transcoded episode stalled every few seconds and seeking took five to nine seconds to produce a frame. Neither was a seek bug: both seeks in the capture landed correctly. The stream itself could not keep up. The episode was HEVC video, E-AC-3 audio, and a PGSSUB subtitle track. Only the audio needed transcoding — the device profile supports HEVC and the server would have remuxed the video untouched. But the PlaybackInfo request omitted SubtitleStreamIndex, and omitting it does not mean "no subtitles": the server then honours the source's default/forced flag and picks a track itself. It picked the PGS one. PGS is a bitmap, and the profile advertised only srt/vtt as External, so it could not go out as a sidecar — leaving SubtitleMethod=Encode, burn-in. Burn-in is a video cost, not a subtitle cost. Compositing rules out remuxing, so the whole HEVC stream was re-encoded to h264 frame by frame. The server could not sustain that in real time: the buffer never grew past one segment and playback ran waiting -> HLS error -> canplay -> three seconds of picture, indefinitely, while each seek restarted the encoder from scratch. TranscodeReasons named it — SubtitleCodecNotSupported — but nothing in the log connected that to the stall, so the diagnostic now says which track it is declining and why. Ask for SubtitleStreamIndex=-1 explicitly, and advertise every text format we can render (srt/subrip/ass/ssa/vtt) as External so a subtitle can only ever arrive as a sidecar. Nothing is lost: the app already fetches subtitle tracks itself and draws them over the video (UR-020), so the server's composited copy was always redundant. Image-based tracks are consequently not offered, which is honest rather than a regression — the renderer cannot composite a bitmap, and the previous behaviour paid for them by making the stream unwatchable. The policy lives beside the other device-profile rules in Rust, where it is testable without a device. TRACES: UR-020, UR-004 | DR-176 | UT-168	2026-08-16 09:23:39 +02:00
dtourolle	1a9805f0f3	fix(downloads): queue the whole album, and make every queued track findable offline ... An album download put a handful of its tracks on the device while the button reported the album as downloaded. Two independent gaps, one shared cause. - `download_album` read its track list from `items WHERE album_id = ?` — the local catalog cache. Jellyfin does not return `AlbumId` on every listing endpoint, so tracks cached from one of those sit in `items` with a NULL `album_id` and are invisible to that query. On the reported database three whole albums (18, 12 and 9 tracks) had it NULL on every track; a partially linked album queued only the linked subset. - The frontend then resolved one stream URL per track from its own list and paired it with the returned row ids by position. The ids came back in the backend's `index_number` order over a different set of rows, so a row could be handed another track's URL and any track past the end of the shorter list was never started. On Android that loop also stopped wherever the webview was suspended. - `album_id` is what `OfflineRepository::get_items` joins a track to its album on, so a track that did download stayed invisible under its album offline — the same missing link seen from the other side. The operation now belongs to Rust end to end: - `HybridRepository::get_album_tracks` asks the server what the album contains. Cache-first `get_items` is right for browsing and wrong for deciding what to download; it errors offline so the caller falls back to the ungated local catalog, keeping the queue-while-offline flow. - `queue_album_tracks` writes the album link onto every track it queues, and creates an `items` row for tracks the cache has never seen. - Stream URLs resolve here, through the existing reconnect resolver, now scoped to the rows just queued so one album cannot start every unrelated pending row. Only the album id crosses the IPC boundary. - `album_file_names` gives each track its own file. A title repeated inside one album (deluxe edition, two discs) mapped to one path, so those downloads overwrote each other. Re-tapping download on a broken album heals it: missing tracks are queued and the tracks already on disk get their link. `download_series`/`download_season` still derive their episode lists from the cache the same way and want the same treatment. DR-173, UT-170..172. Rust 673 tests, frontend 975 tests, svelte-check and check:boundary clean. Note: this tree is shared with a concurrent session. Only the files above are committed; docs/traceability.md is left to be regenerated once that work lands.	2026-08-16 09:20:32 +02:00
dtourolle	3363ff7f08	Merge branch 'master' into worktree-mosaic-library ... # Conflicts: # scripts/extract-traces.test.ts	2026-08-16 00:51:46 +02:00
dtourolle	9858b7cb92	chore(release): 0.5.4	2026-08-16 00:46:17 +02:00
dtourolle	7e1f0e0547	Merge branch 'master' into worktree-mosaic-library ... # Conflicts: # docs/traceability.md	2026-08-16 00:06:15 +02:00
dtourolle	e015c4c9b1	Merge branch 'master' into worktree-mosaic-library ... Renumbers the mosaic's requirement IDs out of the way of the download work that landed on master in parallel: it had already claimed DR-163/DR-164 and UT-162, so the mosaic layout is now DR-172, the library favourites scope DR-173, and its composition test UT-167. Note for the download branch: its UT-162..UT-165 rows trace to DR-163..DR-166, none of which are defined in requirements.md — that branch defined DR-167..171 instead. Those references are orphaned and want a look; nothing here touches them.	2026-08-16 00:04:26 +02:00
dtourolle	7387f35c7e	docs(player): correct the stale "native video defaults to off" comments ... DR-161 made `experimentalNativeVideo` default to on, but three comments still described the pre-flip world and one of them was load-bearing: - `nativeVideo.ts` labelled the store "Default off" directly above a `load()` that returns true when nothing is stored. - The two PiP comments explained themselves as "what makes PiP work in the shipping configuration", which stopped being true when Android started shrinking the real ExoPlayer surface. They still describe the Linux path and the flag-off case, so they say that instead. - `video_audio_codecs` justified its narrow codec list with "video does not play through ExoPlayer", which is no longer so on Android. The narrow list is still right, for a different reason now recorded: the flag is a user setting and a download outlives it, so only the intersection holds on both sides of the switch. DR-171 carries the same caveat. No behaviour change.	2026-08-16 00:00:10 +02:00
dtourolle	0861523015	feat(library,home): lay libraries out as a mosaic, with favourites per category ... The library overview and the home shortcut strip showed artwork of three different shapes — square music covers, 16:9 library backdrops, 2:3 posters — in grids that pick one box and crop everything to it. The home strip said so in a comment: it forced `aspect="video"` on music libraries so the row would line up, which lined it up by cutting the covers down. Both surfaces are now justified mosaics: rows share one height and each tile is as wide as its own artwork. `layoutMosaic` is a pure module — it packs tiles until the height needed to fill the container drops to the target, justifies the row by absorbing the rounding remainder into its widest tile, and deliberately leaves the last row unstretched so one leftover tile does not inflate into a banner. The component supplies only what the DOM knows: the measured container width, and the artwork's *decoded* aspect ratio (via a new `onNaturalSize` on CachedImage), committed in one debounced batch so the grid does not reshuffle once per image as artwork lands. Favourites gain a tile per category beside the library it belongs to, alongside the existing cross-library entry. Which collection type maps to which category is Jellyfin vocabulary, so it is derived in Rust — `SearchScope::for_collection_type`, stamped onto every `Library` by a new constructor and carried over as an optional `favoritesScope`. Deriving it in Svelte would have rebuilt the exact leak `SearchScope::item_types` was extracted to close. A category shows one tile however many libraries share it, and a library kind favourites do not carve up (Live TV, channels, books) gets none. Also corrects the requirements-count test, which the UR-074 commit left one behind. Spec: docs/specs/library-mosaic.md TRACES: UR-075, UR-067 | DR-163, DR-164 | UT-158..UT-162	2026-08-15 23:57:09 +02:00
dtourolle	ac4fccd499	fix(downloads,playback): re-encode undecodable audio and carry the media source through ... Work from a parallel session in the same working tree, committed here so the branch is not left half-written. Attribution note: authored in a concurrent Claude session, not by the author of the preceding commit. - DR-171: a downloaded video keeps audio the device can actually decode. `original` quality asked for a straight copy, so an E-AC-3/AC-3/DTS/TrueHD track came down untouched and the webview had nothing to play it with. - `get_video_download_url` gains the media source, so the URL is built against the source actually chosen rather than the item's default. - Device profile and repository plumbing updated to match. Verified green as a whole: 656 Rust tests, 945 frontend tests, svelte-check clean.	2026-08-15 23:54:00 +02:00
dtourolle	a5535f2941	fix(downloads): stop libraries mixing, make pause/resume real, reap partials, end bitrate corruption ... Four defects behind "downloads still flaky", each with its own cause. Libraries mixed their media (DR-167). Cached items carry no link back to their library — library_id and parent_id are NULL on every row — so the library branch of get_downloaded_items matched `EXISTS (SELECT 1 FROM libraries WHERE id = ?)`, which asserts only that the library exists and never constrains the item to it. Opening any downloaded library listed every downloaded top-level item on the server: films under Music, albums under TV. The query deciding which libraries appear already had the right rule, so the two disagreed about the same question; that collection_type <-> item_type mapping is now one constant used by both. Pause and resume did nothing (DR-168). pause_download wrote status = 'paused' and stopped there — no cancellation existed anywhere in the download stack, so the streaming task ran on and overwrote the row with completed/failed when it finished. The row flicked to "paused" and undid itself. resume_download had the mirror defect: it flipped the row to 'pending' without pumping, and the pump is not a poller, so a resumed download sat until some unrelated event pumped the queue. Adds a per-download stop flag the worker reads between chunks and on retry, returning Stopped — not retryable, not recorded as a failure, and the .part file is kept because that is what the resume continues from. Registering returns a fresh flag so a resumed download does not inherit the pause that stopped it. Cancel and clear_stale_downloads signal it too, so neither deletes a file still being written. Partial files were never reaped (DR-169). The worker named its sidecar with with_extension("part"), which replaces: movie.mp4 became movie.part. Every cleanup path deleted "{file_path}.part" — movie.mp4.part. They never matched, so the partial of every cancelled or failed download stayed on disk forever, invisible to disk-usage totals because no row pointed at it. One partial_path helper now serves the writer and the cleaners. Bitrate downloads corrupted themselves (DR-170). Only `original` asks for Static=true; every other rung requests a transcode, which Jellyfin serves chunked with no Content-Length and cannot byte-seek — it ignores Range and answers 200 with the whole stream, not 206 with the tail. The worker sent the header whenever a .part existed and appended the body regardless, so each retry concatenated another full copy onto what was on disk. The file grew past its real size and would not play, which is why bitrate downloads stayed broken after the videoBitRate casing fix corrected the request. resume_offset now lets the response decide: append only on 206, otherwise truncate and take it from the top. docs/requirements.md also carries DR-171/UT-166, written by a parallel session working in the same tree; its code lands separately.	2026-08-15 23:52:02 +02:00
dtourolle	d49d027020	docs(player): allocate UR-074/DR-162 for the streaming bitrate cap ... The feature shipped tagged against DR-160, which a parallel session had claimed for picture-in-picture in the meantime. Renumbered to DR-162 across the Rust and frontend TRACES comments (the PiP tags in VideoPlayer.svelte, pictureInPicture.ts and nativeVideo.ts keep DR-160) and regenerated bindings.ts. Adds the requirement rows the tags point at: UR-074 for the user need, and DR-162 covering why the cap has to reach the PlaybackInfo negotiation and not only the transcode URL, why the ceiling is process-wide, and why the Settings default persists while the in-player override does not. Notes that this gives UR-070 its resume-at-the-same-point mechanism while the server-offered rendition list that requirement also asks for stays proposed. UT-156/157 record what the tests pin. docs/specs/streaming-bitrate-cap.md carries the layer assignment — the step definitions, the video/audio split, the resolution pairing and the reload decision are all Rust; the frontend holds a serde token and the labels it was handed. TRACES: UR-074 | DR-162 | UT-156, UT-157	2026-08-15 16:39:53 +02:00
dtourolle	dda2ff86a3	feat(player): cap streaming bandwidth with a user-chosen bitrate ceiling ... Video streams were opened at a fixed allowance nobody could change: MaxStreamingBitrate=20000000/VideoBitrate=18000000 on the HLS transcode URL, 20 Mbps in the PlaybackInfo negotiation, and a 999999999 device profile that let the server direct-play a source of any size. On a metered or slow connection there was no way to spend less. StreamingQuality is a ladder of bandwidth ceilings — Original, 20/10/8/ 4/2/1 Mbps and 720 kbps — where a step bundles the total ceiling, the audio share of it and the resolution that budget can carry. Those numbers are Jellyfin encoding vocabulary, so they live in Rust and the frontend only names a variant; labels and details come back over IPC from player_get_streaming_qualities, the same arrangement as the EQ presets. The cap has to reach the *negotiation*, not just the transcode URL: max_static_bitrate in the device profile is what makes the server refuse to direct-play a file fatter than the cap, and without it a 30 Mbps remux is handed over untouched and every URL parameter downstream is moot. So it is applied at all four places that decide bandwidth — the HLS URL builder, PlaybackInfo, the Live TV stream, and the background-audio handoff (which takes the lower of the cap and its own 384 kbps). Video bitrate is the total minus the audio share so the two together honour the ceiling rather than overshooting it. The ceiling is process-wide rather than a repository field: it is a preference about this device's connection, must survive a repository rebuilt on re-login, and every URL builder plus the negotiation have to agree on it or the cap leaks. Same shape as INCLUDE_CATALOG_BROWSE. Two ways in. Settings holds the durable default, persisted to app_settings and restored at startup — unlike the rest of VideoSettings, because a limit set for a metered connection that silently reverts to uncapped on the next launch spends the user's data with no changed setting to see. The in-player menu is the "this film, this connection" override: a cap is a property of the stream the server is producing, so it cannot apply to one already in flight — player_set_stream_quality re-opens the stream at the new quality and resumes at the current position, reloading the native backend itself and handing HTML5 a URL for the same reloadSource primitive the audio-track switch uses. Tests pin the URL parameters at a capped and an uncapped step, the handoff taking the lower of the two, the ladder's internal consistency (video + audio == cap, resolution descending with bitrate) and the persisted token's round trip. The ceiling is process-wide, so the tests that depend on it serialise on a guard that restores the default. TRACES: UR-074 | DR-160 | UT-156, UT-157	2026-08-15 16:34:56 +02:00
dtourolle	9f5f57cba4	fix(ui,player): scroll restore, immersive fullscreen, watched toggle, handoff timeline, PiP ... Batch of reported bugs and enhancements. UI - Pages no longer inherit the previous page's scroll position (DR-156, UR-072). The shell keeps its scrollers alive across navigation by design, so the element never remounts and its scrollTop survived the route change; SvelteKit restores window scroll, which this app never uses. ScrollMemory records the offset per route and per container: forward moves reset to the top, Back restores where the route was left. - Season header stacks on narrow screens, and the title span gets min-w-0 so it actually truncates instead of overflowing under the action buttons. - Favourites gets a labelled tile at the head of the library grid rather than only an unlabelled heart icon in the header. Playback - Full-screen video on Android hides the system bars (DR-157, UR-066). requestFullscreen() cannot touch the Activity window from inside a WebView, so the control did nothing visible while the bars stayed painted over the video. ImmersiveModeBridge hides them, restored on exit, Escape and teardown. - Background-audio handoff stops leaking its relative timeline (DR-159). background_audio_base was a display-only correction applied in two places while progress reports to Jellyfin, the frontend and media3's own seeks all worked in the relative timeline treating it as absolute — each crossing losing exactly `base` seconds. The conversion now happens once, in the position tick, and inbound seeks resolve through seek_absolute, which re-opens the stream at the requested position because the handoff transcode cannot seek. - Picture-in-picture works on the path that actually plays video (DR-160). canEnterPip demanded a native ExoPlayer surface, but that path is behind a flag defaulting to off, so PiP could never engage. It now accepts the WebView <video> too, keeping the WebView visible and routing play/pause to the element. - Native video is now the default so PiP has a real surface (DR-161). The scrub-regression tests pinned the flag-off path implicitly; they now mock it off explicitly. The native scrub/seek path is not covered by the suite and needs device verification. Watched state - Watched toggle on the episode row, season header, series and movie hero, and the Episode Focus View (DR-158, UR-073). Both backend halves already existed with no caller. storage_set_watched covers a container's episodes so the toggle is honest offline, and QueuedOp::MarkUnplayed gives the sync queue the missing direction. Release - Fix the Android versionCode floor (set-version.sh). v0.5.2 shipped code 5002 under an earlier minor*1000 scheme, but the current minor*100 formula yields 1502 for that version and 1503 for 0.5.3 — so every 0.5.x release built from it was an un-installable downgrade for anyone already on v0.5.2. Widened to 10000 + major*1000000 + minor*1000 + patch (0.5.3 -> 15003). - Bump to 0.5.3.	2026-08-15 16:26:31 +02:00
dtourolleandClaude Opus 5	ba5fd55204	fix(sync): mirror the server's watch position so resume crosses devices (DR-155) ... The resume check reads the local user_data row and nothing else, but mirror_user_data -- the only path by which server UserData lands in that table -- mirrored is_favorite alone, and returned early whenever that field was absent, which is exactly the shape of an ordinary watched episode. playback_position_ticks was therefore write-only from this device's perspective: watch 40 minutes in a browser, open JellyTau, and it resumed from whatever this device last saw, or offered no resume at all. Same user-visible symptom as the Android bug fixed earlier on this branch, from an unrelated cause -- which is why resume read as broadly flaky rather than as one defect. The mirror now carries the position alongside the favourite flag under the same pending_sync = 0 conflict rule, so a local position still waiting to be pushed is never pulled backwards by a server that has not yet heard where we got to. COALESCE(excluded.x, user_data.x) keeps the stored value for a field the server omitted rather than nulling it, and a row with neither field is still skipped rather than fabricated as zeroes. Mirroring alone was not sufficient. get_item -- the call the player route makes -- returned the cached copy on a hit and never consulted the server, so for an already-cached item the mirror never ran. It now refreshes in the background on a cache hit via race_with_refresh, the reusable form of what get_items already did inline. That asymmetry is why browsing a season picked up other devices' state while opening the episode directly did not. The refreshed value lands for the next read; the cache-first race still answers immediately. The DR/total counts in extract-traces.test.ts are updated for DR-154 and DR-155 -- that edit is the test's intended signal that the CI gate's denominator is live rather than frozen. Verified red->green in the jellytau-builder image: both new tests failed before the fix. Full Rust suite passes (634), cargo fmt clean, clippy adds no new warnings; frontend suite (933) and svelte-check clean. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-12 22:14:20 +02:00
dtourolle	fec4b7ae8c	Merge branch 'fix/download-bitrate-param' into HEAD	2026-08-12 20:11:12 +02:00
dtourolleandClaude Opus 5	2ca2174cea	fix(player): return volume control to the local speaker when a remote session stops ... Stopping a remote session left Android stuck on the remote volume slider with no way back to the device speaker. Two causes: 1. `player_stop`'s remote branch sent "Stop" to the session and returned without touching the playback mode, so the manager stayed in Remote. It now drops to Idle, mirroring what the local branch already does. 2. Volume routing was torn down at a single call site (`transfer_to_local_inner`), so every *other* exit from remote mode leaked the Android VolumeProviderCompat. Routing is now derived from the transition inside `set_mode`: entering remote attaches control, any exit from remote hands it back to the local media stream. This also covers the frontend `disconnect()` path (Remote -> Idle) and the local-playback-start paths (Remote -> Local). Adds a `RemoteVolumeControl` trait so the routing rule is unit-testable off-device — the real implementation is Android JNI. Tests cover remote->idle, remote->local, remote->remote (re-arms, never releases), and that local/idle transitions leave routing untouched. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-12 20:09:17 +02:00
dtourolleandClaude Opus 5	0ca2857c3a	fix(catalog): show a new album once in Recently Added, not once per track ... Recently Added listed every newly-added track individually, so importing a 14-track album filled the whole row with that one album and buried everything else. Both code paths that build the row had the same symptom from separate causes: - Online: Jellyfin's /Items/Latest defaults to GroupItems=false, returning each new leaf on its own. Send GroupItems=true so the server collapses children into the container that was added. - Offline: the downloaded-items CTE deliberately matches leaves *and* their container (right for browsing, wrong here), so a downloaded album returned the album plus each of its tracks. Drop a leaf only when its own container is in the same result. Items with no container (movies, standalone tracks) are unaffected in both paths. The online URL is extracted into build_latest_items_endpoint so it can be asserted without an HTTP server, matching build_favorites_endpoint. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-12 20:07:57 +02:00
dtourolleandClaude Opus 5	1f32e4040b	Merge branch 'fix/home-library-card-heights' from origin ... Local and remote had both advanced two commits from 3619f71 with no overlapping files: remote: uniform card heights; resume after furthest-watched episode local: Android native-path resume; queued watch-position sync (DR-154) Merged cleanly with no conflicts. The series_progress policy tests pass against the merged file (19/19). Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-12 19:21:18 +02:00
dtourolleandClaude Opus 5	e4632bb2b2	fix(sync): queue a watch position the server could not be told about (DR-154) ... sync_queue and its drain (DR-131) were built, tested and running, but the stop-report path never fed them, so closing a video while the server was unreachable lost the resume point outright. HybridRepository::report_playback_stopped is a bare pass-through to the online repository ("Playback reporting goes directly to server"), and on failure the error surfaced to a frontend catch whose own comment read "Server error - could queue, but for now just log". Both producers that would have queued it -- PlaybackReporter::queue_for_sync in Rust and syncService.queuePlaybackProgress on the frontend -- have no callers on the playback path. user_data.pending_sync was dutifully set to 1, but nothing drains that flag for positions the way favourites do (DR-120). The command layer now enqueues a report_playback_stopped row whenever the push fails; the existing drain already parses and replays that operation. The pending row for an item is superseded in place rather than appended to: progress is reported every 10s, so a server that stays down would otherwise add a row per tick, all obsoleted by the newest -- the unbounded queue DR-131 exists to prevent. Only pending/failed rows are superseded, since reviving an abandoned row restores that same growing counter. Queueing is best-effort and never fails the command: the local position is already saved, so a failed queue write must not be reported as a lost position. Verified red->green in the jellytau-builder image: the four new tests failed to compile (enqueue_playback_stopped not found) before the fix. Full Rust suite passes (627 tests), cargo fmt clean, clippy adds no new warnings; frontend suite (933) and svelte-check also clean. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-12 19:18:11 +02:00
dtourolleandClaude Opus 5	adc460f35d	fix(downloads): honor the selected bitrate (videoBitRate, capital R) ... Downloading at a specific quality silently returned the full-size original. The download URL builder spelled the transcode params `videoBitrate`/`audioBitrate`, but Jellyfin binds `videoBitRate`/ `audioBitRate` — with a capital R. Query-key binding is case-insensitive, so this is not a casing preference: the lowercase-r form is a different token that fails to bind. The server discards it without error and then stream-copies the source, so picking "480p" produced an original-quality file with no failure surfaced anywhere. `maxHeight`/`videoCodec` were unaffected (case-insensitive binding covers them), which is why the height cap applied while the bitrate cap vanished. Also set `allowVideoStreamCopy=false` on the transcode presets to force a real re-encode. Video stream-copy is gated by `allowVideoStreamCopy`, not `enableAutoStreamCopy` — the latter governs audio only. `original` is unchanged: it stays a deliberate direct static copy, now pinned by a test. The pre-existing unit tests asserted the broken lowercase-r spellings, so they passed against broken code; corrected. Verified red -> green by extracting the pre-fix and post-fix builder bodies into an isolated harness: 15 assertion failures before, 0 after. TRACES: UR-071 | DR-123 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-12 18:44:54 +02:00
dtourolleandClaude Opus 5	9d7cb085e9	fix(series): resume after the furthest-watched episode, not the first gap ... `pick_current_episode` rung 3 returned the first unwatched episode in series order. A viewer who skipped the pilot but is three seasons deep was sent back to S1E1: the gap was a deliberate skip, not the place they stopped. This read as flaky rather than consistently wrong because rung 3 only fires when the server's Next Up (rung 2) yields nothing, and `resolve_current_episode` swallows that call's errors with `.unwrap_or_default()`. `HybridRepository::get_next_up_episodes` delegates unconditionally to the online repo, so any unreachable-server moment silently degraded to the empty vec — same series, same watch state, different answer depending on one request's outcome. Rung 3 now scans the ordered list from the end with `rposition(is_played)` and returns the episode after the furthest-watched one, falling back to the previous first-unwatched behaviour when nothing is watched or the series is finished. Season crossing comes free from the already-flat series ordering, and `season_rank` keeps specials last so a watched special cannot mark a show finished. Tests written first and confirmed failing (S1E1 where S3E4 was expected), covering the skipped-pilot case, rolling into the next season past a skipped episode, and the watched-special case. All 17 existing tests still pass. Note: cargo test could not run locally (javascriptcoregtk-4.1 / webkit2gtk-4.1 absent on this host). The pure policy half plus its verbatim test module were extracted into a standalone crate to get real red/green; the full crate suite still needs a run on a complete toolchain. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-12 18:23:26 +02:00
dtourolleandClaude Opus 5	e144e62b31	feat(player): render Android video natively behind a transparent webview (DR-150, DR-151, DR-152) ... Rust already reported `use_html5_element: false` on Android, but two frontend overrides threw that answer away, so ExoPlayer's video path had never actually run. Both are lifted behind an `experimentalNativeVideo` opt-in (default off). The flag is a suppressor, never a promoter: off forces HTML5 even where Rust says native, so an in-progress spike cannot ship as the default, but it can never select native where Rust reported HTML5 — Linux cannot composite behind WebKitGTK, and promoting there would be a black screen. Two blockers the spec did not anticipate, both in code assumed to be merely unreachable rather than broken: - `JellyTauPlayer.setActivity()` had zero callers, so `currentActivity` was always null and `autoAttachSurface()` bailed. The SurfaceView was created and wired to ExoPlayer but never added to the view hierarchy — video would have decoded to a surface that was never on screen, whatever the webview did. This also revives PiP on the video path, which gated on the same flag. - `createAdapter()` was not the real gate; it is never called in production. The actual override was in VideoPlayer.svelte, which forced HTML5 and stopped the native backend `player_play_item` had just started. Both sites now route through `createAdapter()`. Compositing needs two independent opaque layers cleared, not one. Clearing only the page leaves the WebView widget opaque — audio over a black picture, exactly the symptom the old INTERIM comment described. `videoSurface.ts` toggles both: the widget background and window drawable from Kotlin, the page backgrounds via a `data-native-video` attribute keyed by app.css. Transparency lives in `tauri.android.conf.json` so Linux keeps an opaque window, and is scoped to the playback session so the launcher never shows through the rest of the app. Phase 3's rect plumbing turned out to be unnecessary: video is fullscreen on the player route, and `fitSurfaceToScreen()` already letterboxes and re-fits on rotation. The mini-player transition remains unverified on device. Also removes the `navigator.userAgent` sniffing in webviewAudio.ts, which was a second copy of the Rust cfg gate free to drift from it. `player_get_capabilities` now reports `usesWebviewAudio` and `supportsNativeVideo` from those same gates. Tests: adapter selection covers the full matrix, including the regression guard that the flag off beats Rust. Written first and confirmed failing (2 of 7) before the fix. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>	2026-08-11 20:57:58 +02:00
dtourolle	07d10dfed7	docs(traceability): land the DR-149 requirement rows and settle a UT collision ... The DR-149 row lost an index race with a parallel session's edit of the same file, so the previous commit carried the count assertion (DR 144, total 282) without the requirement it counts — a clean checkout of that commit failed `bun run test` against its own requirements.md. The parallel session also reached UT-143 and UT-147 for subtitle work, which collided with the UT-143 used for the client-side transcode tests. Those move to UT-148, in the table and in the device_profile TRACES comments, so no two requirements share an ID.	2026-08-11 20:11:22 +02:00
dtourolle	acddcdd6fa	fix(playback): force a transcode when the webview cannot decode the audio (DR-149, 0.4.8) ... Advertising a webview-shaped profile (DR-148) was necessary but not sufficient. Probing the server directly showed Jellyfin 10.11.5 enforces a DirectPlayProfile's Container and VideoCodec — excluding either returns SupportsDirectPlay:false with TranscodeReasons=ContainerNotSupported / VideoCodecNotSupported — but ignores its AudioCodec entirely: an E-AC-3 track is still offered for direct play against a profile listing only aac,flac,mp3,opus,vorbis. Neither a VideoAudio CodecProfile forbidding the codec nor MaxAudioChannels:2 against a 6-channel track changes the answer, so no profile the client can send fixes this and the picture plays silent. The client therefore stops delegating a question it can answer itself. The negotiated source's audio is checked against what the webview decodes, and an undecodable track forces the existing h264/aac HLS transcode regardless of the server calling direct play fine; direct_play and needs_transcoding are corrected to match so the frontend and the reporting path agree with the URL actually used. The track judged is the one that would be served — the default, else the first — since a supported track further down is not the one that plays. A source with no audio, or a codec the server did not name, is left alone rather than transcoded on a guess. Test-first: the new tests failed against the old behaviour before the decision existed. Verified on a motorola edge 30 by the audio HAL, not by ear — the same E-AC-3 episode logged isMusicActive=true once and 58 ACDB-LOADER lines under this build, against 0 and 0 on 0.4.6, where an AAC file in the same session produced 16 and 116. No FATAL EXCEPTION, so R8 on the signed release build is unaffected. Also carries in-flight subtitle-track work authored in a parallel session (subtitleTracks, VideoPlayer, player/media, bindings) at the user's request, so the tag matches the APK verified on device.	2026-08-11 20:07:11 +02:00
dtourolle	6a712c46cb	fix(player): send subtitle tracks to ExoPlayer on Android (UR-020) ... Selecting a subtitle on Android did nothing. The Kotlin side has been complete for a long time — JellyTauPlayer.load() parses a subtitles JSON array into MediaItem.SubtitleConfigurations and setSubtitleTrack() drives a TrackSelectionOverride — but nothing ever reached it. VideoPlayer built the list and then threw it away: it resolved every subtitle stream's URL into a subtitleTracks array and the commands.playerPlayItem({...}) call two lines below passed only streamUrl, title, id, videoCodec and needsTranscoding. PlayItemRequest had no subtitle field to put them in, so create_media_item hardcoded subtitles: vec![], android/mod.rs serialized "[]" across JNI, and every MediaItem reached ExoPlayer with zero SubtitleConfigurations. A later set_subtitle_track then found no text track groups and logged "Invalid subtitle track index". PlayItemRequest now carries the tracks (defaulted, so the background-audio handoff and next-episode callers are unchanged) and create_media_item threads them onto the MediaItem. Serialization: SubtitleTrack is reused verbatim rather than given an IPC-specific twin, and deliberately keeps snake_case. The same struct feeds two consumers that both spell mime_type — the JNI JSON that JellyTauPlayer.load() reads with optString("mime_type"), and the generated binding the frontend types against. camelCasing it would not fail the build or the IPC; Kotlin would silently fall back to its default MIME type for every track. UT-146 asserts the exact serialized keys so a future rename_all cannot pass unnoticed. The index mapping was NOT already correct. setSubtitleTrack(n) indexes ExoPlayer's filtered text track groups, i.e. the position of the sideloaded configuration — but the menu passed its own {#each} row number, which counts every subtitle *stream*, including ones whose URL failed to resolve and were therefore never sideloaded. One failed URL and every track below it selected the wrong subtitle. The position is now looked up in the exact array that was sent (nativeSubtitleArrayIndex), and a stream that was never sent maps to "off" rather than to a guessed position. The resolution loop also reuses resolveSubtitleTracks() from the Linux fix instead of duplicating it, which fans the URL requests out in parallel rather than awaiting them one per stream before playback can start. The awaits are safe where they sit: the native-mode pitfall is about Svelte lifecycle calls after an await, and nothing is registered here — the background-audio subscriptions above still run synchronously. No Kotlin change was needed. Tests (UT-145, UT-146, UT-147) were written first and failed: PlayItemRequest had no subtitles field to compile against, nativeSubtitleTracks and nativeSubtitleArrayIndex did not exist, and the playerPlayItem call carried no subtitles key. TRACES: UR-020 | IR-016, JA-008 | UT-145, UT-146, UT-147	2026-08-11 20:03:19 +02:00
dtourolle	2c3955914e	fix(playback): advertise only webview-decodable audio for video (DR-148, 0.4.7) ... The audio codec list sent to Jellyfin comes from MediaCodecList, which describes ExoPlayer — but video does not play through ExoPlayer. Android force-renders every video in the webview <video> element (the interim override in VideoPlayer.svelte) and Linux always has, and Chromium/WebKit decode a far narrower set than the platform does. A motorola edge 30 ships /vendor/etc/media_codecs_dolby_audio.xml, so it reported ac3,eac3; the server direct-played an E-AC-3 track with static=true and the webview built a video decoder and no audio decoder at all — full picture, no sound. The defect is triggered by capability rather than the lack of it, which is why a Fairphone and an Honor tablet play the same file on the same build: without the Dolby decoder they never claim the codec, so the server transcodes to AAC. Confirmed by A/B on the failing device — hevc+eac3 silent, hevc+aac audible, same session, same profile, same direct-play path, audio codec the only variable. video_audio_codecs narrows the platform list to the webview-decodable set for the video direct-play profile only. Audio-only playback really is the native player's, so that profile keeps the full list rather than transcoding music that plays perfectly well. A list with nothing decodable still claims aac, since a profile claiming nothing invites the server to give up instead of transcoding. The video codec list is deliberately untouched: HEVC direct-plays through the webview correctly, so the constraint is specific to audio. Test-first: the tests failed against the old behaviour before the filter existed, including the case built from the phone's real codec list. The requirement-count assertion in extract-traces.test.ts moves 280 -> 281 for the added DR, which is the deliberate edit that test exists to force. Not yet verified on device — the 0.4.7 APK was still building.	2026-08-11 19:13:46 +02:00
dtourolle	1b70926c36	feat(offline): play downloaded video, and drain the offline sync queue (0.4.6) ... Bundles this session's work plus the concurrent search/offline/player changes. Every gate passes on the combined tree: 885 frontend tests, 610 Rust tests, clippy clean, boundary clean, trace coverage 86%. Offline video playback — four separate defects, each of which alone stopped it: DR-133 A completed download's file_path is already absolute (the worker rewrites it on completion), but the player rooted it a second time and handed the webview /data/user/0/app//data/user/0/app/videos/x.mp4. DR-134 The asset protocol was never enabled: no protocol-asset feature and no assetProtocol config, so convertFileSrc produced URLs nothing answered. Also silently defeated the cached-thumbnail path, which fails soft to the server copy and hid it whenever the server was reachable. DR-137 Tauri's asset protocol answers a range-less request by reading the whole file into memory, and only advertises Accept-Ranges from inside its range branch, so the first request never learns ranges exist. Chromium gave up with PIPELINE_ERROR_READ after ~31s. Local media is now served by a loopback HTTP server: bounded 4 MiB chunks streamed from the file handle, every response length-delimited, and a range-less request answered with one chunk rather than the file. Confined by a per-session token and to the app data directory, because loopback is shared between apps on Android. DR-138 Release builds set usesCleartextTraffic=false, so Android rejected the request to that server before any I/O. A network-security-config exempts 127.0.0.1 only; a remote server must still be HTTPS. Downloads: DR-135 download_item never records media_type and the reconnect resolver read that NULL as 'audio', so a movie queued from a media card had its URL resolved by get_audio_stream_url and completed as an audio-only transcode. The item's own type now decides. DR-136 Rows already downloaded that way are requeued on reconnect, since prevention alone leaves them reading "downloaded" and still unplayable. Known limitation: a download taken at `original` quality is a byte copy of the source, so it can be any container. One such file is an AVI holding XVID, which the webview cannot play in any case — the media server serves it correctly and Chromium refuses it. That needs either a transcoded download preset or the native ExoPlayer surface work, and is not addressed here. Also fixes two ID collisions between concurrent work: DR-143 defined twice (search vs offline gate) and UT-131 defined twice (Episode Focus hero vs channel cap). The search requirement is now DR-147 and the channel-cap test UT-141, with their code references and matrix rows updated.	2026-08-09 16:38:07 +02:00
dtourolle	7b531a40be	fix(player): pick a decodable track in the no-audio fallback (DR-146) ... When ExoPlayer selected no audio track, the recovery forced group 0 / track 0 unconditionally. But the most likely reason nothing was selected is that this very track cannot be decoded on this device, so the override reinstated the silence it was meant to fix. Scan the groups for the first isTrackSupported track and override to that. Also clear setTrackTypeDisabled(TRACK_TYPE_AUDIO), since audio may equally have been off at the type level, which an override alone does not undo. When no group holds a supported track, log it as an error — the server was expected to transcode — instead of leaving a silent video with no explanation in the log. Verified by compiling :app:compileArm64DebugKotlin. Not unit-tested: this tree has no Kotlin test source set, as noted in the previous commit.	2026-08-09 15:07:18 +02:00
dtourolle	19bc265a8d	fix(player): do not start a video before audio focus is granted (DR-145) ... Video manages audio focus by hand (handleAudioFocus=false, since ExoPlayer's automatic handling is reserved for the audio path), and all three outcomes of the request were treated as success. AUDIOFOCUS_ REQUEST_DELAYED — which setAcceptsDelayedFocusGain(true) explicitly invites, and which means the system is withholding our audio until it calls back — and an outright REQUEST_FAILED were logged and then followed by playWhenReady = true. The picture rolled with no sound, which to the user is indistinguishable from a broken stream. Hold playback when focus is not granted and start it from the AUDIOFOCUS_GAIN callback. An explicit play() re-requests focus instead of resuming into a stream the system is still muting, guarded by a held-focus flag so repeated plays do not leak focus requests. LOSS clears the pending flag so an unrelated later GAIN cannot start playback the user never asked for. Verified by compiling :app:compileArm64DebugKotlin. Not unit-tested: this tree has no Kotlin test source set (the Gradle project lives in the generated, gitignored gen/ tree), so the logic cannot be exercised off device without restructuring the Android build.	2026-08-09 15:06:49 +02:00
dtourolle	cc7f1cece0	fix(player): play downloaded video offline (DR-133, DR-134) ... Offline video never started: the <video> element reported NETWORK_NO_SOURCE one millisecond after loadstart, which the UI mislabelled as "may need transcoding" even though nothing had been fetched. Two independent causes, both required for playback. The path was doubled. `downloads.file_path` is stored relative to the storage root while a download is queued, but the worker rewrites it to the absolute path it actually wrote once the transfer completes — so a completed row is already rooted. The player's offline branch rooted it a second time, producing /data/user/0/app//data/user/0/app/videos/x.mp4. Audio was unaffected because it resolves the same column through Rust's resolve_local_media_path, which does not re-root. The join is now absolute-aware (POSIX, Windows drive letters, UNC) so rows written before completion still resolve. The asset protocol was never enabled. convertFileSrc rewrites a path to http://asset.localhost/… unconditionally, but Tauri only answers that origin when the protocol-asset cargo feature is compiled in *and* app.security.assetProtocol.enable is set — neither was, so even a correct path resolved to nothing. This also silently defeated the cached-thumbnail path in imageCache, which fails soft to the server copy and so hid the breakage whenever the server was reachable. Scoped to $APPDATA/** — the storage root holding the database, downloads/ and the thumbnail cache — rather than an unrestricted grant. Diagnosed from logcat on device; UT-124 reproduces the doubled path.	2026-08-09 15:05:16 +02:00
dtourolle	a53042fe80	fix(playback): bound the device profile by the audio route's channels (DR-141) ... MediaCodecList answers "can this device decode 5.1", which is not the question that decides whether the user hears anything: a phone decodes an AC-3 5.1 track happily and still has two channels to play it out of. The DeviceProfile carried no MaxAudioChannels, so Jellyfin was free to direct-play the multichannel track to a two-channel sink — silence or dialogue folded into surround channels that go nowhere, depending on the device. Report media3 AudioCapabilities.maxChannelCount for the current route over JNI alongside the codec lists, and bound the direct-play and transcoding profiles (and the HLS URL's TranscodingMaxAudioChannels, previously hardcoded to 2) by it. No codec is ever removed, so a device with genuine surround output keeps direct-playing it. A missing or zero reading means "route not yet established", not "no audio", and falls back to stereo.	2026-08-09 15:01:57 +02:00
dtourolle	db520c6551	fix(playback): stop pinning the video stream as the audio track (DR-140) ... Jellyfin's MediaStream.Index is global across every stream in a media source, so index 0 is the video stream on virtually all files. We sent AudioStreamIndex=0 as "the first audio track" on the HLS transcode URL, the background audio-only handoff URL, the direct-play fallback URL and the PlaybackInfo negotiation body — asking the server to use the video stream as audio. Servers that honour it produce a picture with no sound; only those that silently correct the index hid the bug, which is why it surfaced as "some videos have no audio". Omit the parameter unless a track was actually chosen, so the server resolves the source's DefaultAudioStreamIndex. An explicit selection from player_switch_audio_track still passes through unchanged. Dropped outright from the static=true direct-play URL, which serves the original file untouched.	2026-08-09 14:47:03 +02:00
dtourolle	1ef6180776	chore(release): bump to 0.4.1	2026-08-05 12:31:16 +02:00
dtourolle	878ac5fa59	fix(player): make lockscreen transport reach background audio (DR-097) ... Pausing from the lockscreen did nothing while a video's audio played in the background. The handoff starts native ExoPlayer audio and only then tears the WebView <video> down, and that teardown fires a DOM `pause` the frontend reports like any other — leaving html5_playing = Some(false). Transport therefore stayed aimed at the element: the lockscreen pause emitted a ControlCommand into a <video> that no longer existed while the native player carried on. The controller now tracks a background-audio handoff explicitly. Entering one hands transport authority to the native backend and drops the dying element's state/position/media-loaded reports, which also stop flipping the UI to paused and dragging the position backwards. Exiting restores the element as the player. A lockscreen pause also has to survive the return to the foreground: the video used to resume from a snapshot taken at handoff time, undoing the pause on the way back in. shouldResumeOnForeground() lets an explicit `paused` from the player override that snapshot. TRACES: UR-040, UR-005 | DR-052, DR-097	2026-08-05 12:26:25 +02:00
dtourolle	6aaa80ff92	chore(release): bump to 0.4.0	2026-08-04 20:22:01 +02:00
dtourolle	f7bcfe521d	fix(favorites): save server favourites through to the cache (DR-115) ... The hybrid favourites read went straight to the online repository on a cache miss and dropped the result on the floor. Every other read path persists what it fetches, so this one made the favourites page re-query the server on every visit — and left the offline mirror (DR-114) empty on a fresh install, since this is the path that fills it. It now goes through get_favorites_server_only, which saves through on the way back. The command had a matching hole: with nothing cached it returned the empty result, painting "Nothing favourited yet" at a viewer whose favourites were simply marked on another client. It now asks the repository for a real answer instead of an empty state it would correct a round trip later. TRACES: UR-067 | DR-115	2026-08-04 20:20:36 +02:00