283 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
dtourolle	caebf2d139	fix(android): keep the display awake while video plays ... Android counts its display timeout from the last user input, and watching something is exactly the case where there is none — so the screen dimmed and slept mid-playback unless the user kept tapping it. Nothing held it. FLAG_KEEP_SCREEN_ON appeared nowhere in the app, and neither renderer supplies a hold for free: ExoPlayer's setWakeMode is a CPU/wifi wake lock that says nothing about the display, and it draws into the TextureView we own (DR-192) rather than media3's PlayerView, which is the widget that would otherwise set keepScreenOn itself; the webview <video> path is no better, because the display wake lock Chrome takes for video lives in the browser layer and not in an embedded WebView. ScreenWakeManager toggles FLAG_KEEP_SCREEN_ON on the Activity window — window scoped, so it stops applying the moment the app is not visible and cannot outlive a crash the way an acquired PowerManager.WakeLock can, and it needs no permission. The two rendering paths are independent holders OR-ed in the pure ScreenWakeState: the native path follows onIsPlayingChanged plus surface teardown, so the hold tracks what ExoPlayer reports rather than what the UI intends, and the webview path reuses the setHtml5VideoState report the frontend already sends for PiP. Audio is deliberately not a holder — screen-off music is the point of that path. Also the repo's first Kotlin JVM unit tests: ScreenWakeState is framework-free, so the decision is testable off-device with ./gradlew :app:testUniversalDebugUnitTest (note the variant — plain testDebugUnitTest is ambiguous here). sync-android -sources.sh mirrors src/test into the gen tree alongside the main sources. TRACES: UR-003, UR-004 | DR-202 | UT-199	2026-08-18 14:56:08 +02:00
dtourolle	d5d0e35bca	docs(debt): close the R8 release-APK validation item ... Validated on device. It was the last item gating confidence in v0.8.0 itself: R8 stripping JNI-loaded classes has broken release builds here before, and this release added a new Kotlin path the unminified debug pass did not exercise. Recorded as closed rather than deleted, so it is not re-raised.	2026-08-17 07:17:33 +02:00
dtourolle	a1cb142df4	docs(debt): record the 12 open items from the codebase audit ... Findings not addressed in v0.8.0, plus items the device-verification pass turned up, ordered by what would hurt most if left. Highest are the Android 16 Local Network Protections exposure (LAN Jellyfin access is the app's core function and enforcement is coming) and the traceability extractor's blindness to the Kotlin tree, which means the 90% figure excludes a whole platform.	2026-08-17 06:58:33 +02:00
dtourolle	2c52077b1d	chore(release): 0.8.0 ... Minor rather than patch: three user-visible behaviour changes — cloud/D2D backup disabled, the Android TV launcher entry withdrawn, and lockscreen skip scrubbing rather than advancing during background audio. v0.8.0	2026-08-16 23:59:54 +02:00
dtourolle	6dfc6b259a	fix(player): lockscreen skip scrubs instead of advancing in background audio ... onSkipToNext/onSkipToPrevious forwarded a bare next/previous to Rust, which always advanced the queue. Correct for music, wrong for a video whose audio is running through a background-audio handoff (UR-040): pressing skip to re-hear a line jumped to the next episode instead of scrubbing. resolve_skip_action in player/seek.rs maps the command to Advance or SeekTo, and is_background_audio_active() is the whole test — the handoff exists only for video, and an episode played through it reports MediaType::Audio, so media type cannot distinguish the case. Forward 30s, back 10s, both clamped to [0, duration] so a skip near either end cannot seek negative or read as EOF and advance. Routed through the same spawn-then-seek_absolute path as the scrubber, because a handoff seek re-opens the stream and must not run under the blocking lock (DR-159). Kotlin keeps sending the opaque command; it only gains FAST_FORWARD/ REWIND in the PlaybackStateCompat so the system stops drawing skip arrows for a control that scrubs. The remote-volume action block is deliberately untouched: the handoff never applies to cast sessions, where skip really does mean advance. Tests written first and watched fail (left: Advance, right: SeekTo). 706 Rust tests pass, clippy 0, coverage 90%.	2026-08-16 23:54:43 +02:00
dtourolle	42e7d86ec4	docs(audit): record device-verification results and the asset-protocol finding ... Device pass on HONOR ROD2-W09 (Android 16 / SDK 36) confirms B2, B4, B5, B7 and finds no CSP violations across a full browsing session. C2 was aimed at the wrong thing: the asset protocol is not narrowly used but entirely unused. getCachedImageUrl has no production callers, images arrive as base64 data URIs from Rust via imageGetUrl, and the device saw zero asset.localhost requests. Both protocol-asset and the CSP's img-src http:/https: grant can likely be dropped.	2026-08-16 23:22:47 +02:00
dtourolle	4e451bb534	chore(bindings): regenerate specta output for the new TRACES doc comments ... tauri-specta propagates Rust doc comments into bindings.ts as JSDoc, so adding TRACES comments to command functions changes generated output. Regeneration happens at build time, so this was left dirty by the branch that added them. Doc-comment-only: no signature or exported-symbol changes. Also records the audit corrections made during device verification (B1 mechanism, B7 re-framing, B8, D3 magnitude).	2026-08-16 23:15:58 +02:00
dtourolle	889289286b	merge: clear the clippy backlog and unify lock helpers (D1-warnings, D3) ... 51 clippy warnings -> 0, with 8 justified #[allow]s (IPC arity, specta wire types, and the 9 test-only await-holding-lock sites). 27 raw lock calls moved to the poison-tolerant helpers - all of them test code; production was already clean. Caught a non-neutral clippy --fix: removing the redundant 'use hostname;' in credentials.rs orphaned its #[cfg(target_os = "linux")] onto SERVICE_NAME, which would have cfg'd the constant out of every non-Linux build. Compiles clean on Linux, so only Windows/macOS CI would have caught it.	2026-08-16 23:06:33 +02:00
dtourolle	8500da1a42	chore(rust): clear the clippy backlog and finish the poison-tolerant lock sweep ... `cargo clippy --all-targets` went from 51 warnings (23 in the lib) to zero. Most were mechanical — needless borrows, `assert_eq!` against a bool literal, `vec!` where an array does, `or_insert_with(Vec::new)`, a loop index used only to index — and were applied with `clippy --fix`, then reviewed line by line. That review caught one auto-fix that was *not* semantically neutral: dropping the redundant `use hostname;` left its `#[cfg(target_os = "linux")]` orphaned directly above `SERVICE_NAME`, which would have silently cfg'd the constant out of every non-Linux build. Removed the stray attribute with the import. Where a lint asked for a risky change rather than a better one, it is suppressed with a comment saying why: - `too_many_arguments` on five `#[tauri::command]` handlers and `ThumbnailCache::save_thumbnail` — most of the arity is `State<'_, _>` injection, and a parameter struct would change the IPC contract and the generated TypeScript for no readability gain. - `large_enum_variant` on `PlayerStatusEvent` and `AutoplayDecision` — both are serde + specta wire types emitted a handful of times a second, never bulk allocated; boxing would have to stay invisible to the generated bindings while every match arm gained a deref. - `await_holding_lock` on the `hybrid`/`offline` test modules — the guard is a test-only serialisation lock for the process-global `INCLUDE_CATALOG_BROWSE` flag, and the await it spans *is* the critical section. Each `#[tokio::test]` gets its own single-threaded runtime, so this is not the production deadlock class the lint targets; restructuring would reintroduce the flag race. Real fixes elsewhere: `JellyfinItem::to_media_item` takes `self` by value, so it is now `into_media_item`; the five-tuple episode row in the download commands has a named `EpisodeRow` alias; the mpv `PropertyChange` arm matches `name: "pause"` instead of guarding on it. Also converted the last 27 raw `.lock().unwrap()` call sites to `lock_safe()`, completing the `MutexSafe`/`RwLockSafe` convention. All of them turned out to be in test modules — production code was already clean — so this is consistency rather than a fix. The two raw locks in `utils/lock.rs` stay raw on purpose: those tests deliberately poison a mutex to prove the helpers recover from it. Pure refactoring: all 698 tests still pass.	2026-08-16 23:05:13 +02:00
dtourolle	88e15e3e12	merge: Android runtime security (B1, B3) ... Correct the POST_NOTIFICATIONS mechanism: the lockscreen notification is exempt because of the MediaSession token, not because it belongs to a foreground service — FGS notifications are explicitly NOT exempt. So no permission prompt and no checkSelfPermission gate; instead both notification builders bind the token once and log loudly if it is ever null, turning a silent failure into a logcat line. Stop the webview undoing the network security config: mixedContentMode COMPATIBILITY, allowFileAccess/allowContentAccess false. Conflict resolution: this branch's DR-198 collided with the Tauri branch's, so it was renumbered DR-200 (3 TRACES in JellyTauPlaybackService.kt and the UR-006 matrix row updated). DR-199 was uncontested. Pinned counts summed to DR 191 / total 334; UR-071 takes both DR-198 and DR-199.	2026-08-16 23:03:29 +02:00
dtourolle	c9f33ae6a4	merge: restrictive CSP and narrowed asset scope (C1, C2) ... Set a CSP with script-src 'self' (Tauri nonces the one inline bootstrap script), object-src/frame-src 'none', and necessarily-permissive img/media/connect for the user-supplied Jellyfin origin. Narrow assetProtocol $APPDATA/** -> thumbnails/**, which is convertFileSrc's only remaining caller. Conflict resolution: scripts/extract-traces.test.ts pinned counts summed rather than side-picked — DR-189 and DR-198 were added independently on two branches, so DR 187 -> 189 and total 330 -> 332. docs/traceability.md regenerated.	2026-08-16 23:01:50 +02:00
dtourolle	a93cee9241	merge: stop backing up credentials no key can ever open (B2, B4, B5) ... allowBackup=false plus data_extraction_rules covering device-transfer, not just cloud-backup; treat an undecryptable credential blob as a logout rather than a hard error; drop the half-declared leanback/TV entries; jvmTarget 1.8 -> 17.	2026-08-16 23:01:05 +02:00
dtourolle	4996727ca9	merge: enforce CI gates the contributor rules already required (D1, A3, A4, D2) ... Add cargo fmt --check (strict) and cargo clippy (advisory) to CI, ratchet the traceability threshold 50 -> 82, add a dangling-ID gate, and fix the offlineCatalog flake (cold dynamic import, not a timer).	2026-08-16 23:00:58 +02:00
dtourolle	e3cdb12967	merge: traceability matrix repair (A1, A2, A4) ... Tag the twelve Done-but-untraced requirements, re-scope the stale libmpv IRs against the backends that actually deliver them, and define the two dangling IDs (DR-189, UT-188). Coverage 285/330 (86%) -> 301/331 (91%); IR 19/32 -> 25/32.	2026-08-16 23:00:35 +02:00
dtourolle	2d21f092d5	fix(android): stop the webview undoing the network security config ... MainActivity set mixedContentMode = MIXED_CONTENT_ALWAYS_ALLOW together with allowFileAccess/allowContentAccess = true, which is a blanket cleartext opt-in reached by hand — the exact thing network_security_config.xml exists to prevent and its own comment warns against. Nothing needed any of the three: - file:// is never loaded. Cached thumbnails go through convertFileSrc, which on Android resolves to http://asset.localhost/... and is answered by wry's request interceptor rather than the filesystem; downloaded media goes over the loopback HTTP server (DR-137), which exists precisely because the asset/file route cannot stream a large file. - content:// is never loaded. The manifest's FileProvider is for outbound share intents, not webview navigation. - Mixed content never arises. Tauri serves the UI from http://tauri.localhost (use_https_scheme defaults false and is not set), and both 127.0.0.1 and asset.localhost are loopback/.localhost origins Chromium treats as potentially trustworthy. A plain-HTTP remote server would be mixed content, but the network security config already rejects it first — so ALWAYS_ALLOW bought nothing. COMPATIBILITY_MODE rather than NEVER_ALLOW is a deliberate hedge: the platform default at targetSdk 21+ is NEVER_ALLOW, so this is still one step looser, and it keeps passive content working if the analysis missed a path. The two files now cross-reference each other so the pair cannot drift apart again. Also records why POST_NOTIFICATIONS is declared but never requested. An audit read the missing runtime request as a threat to the lockscreen controls; it is not. A foreground-service notification is explicitly NOT exempt, but a media-session one is, and the platform predicate (Notification.isMediaNotification) requires MediaStyle AND a non-null session token. Confirmed on device: appops POST_NOTIFICATION: ignore with the transport notification live. So no permission prompt is added and startForeground stays ungated — a guard there would trade a cosmetic problem for the "did not then call Service.startForeground()" kill. What is added is the guard matching the real precondition: both builders bind the token once and log an error if it is ever null, since SystemUI's media carousel is gated on the same predicate and a token-less notification loses the lockscreen controls entirely, silently. TRACES: UR-006, UR-071 | DR-198, DR-199	2026-08-16 22:59:47 +02:00
dtourolle	ebf9a99b80	docs(traces): tag the twelve "Done but untraced" requirements, and stop the matrix over-reporting ... Twelve requirements were marked Done in docs/requirements.md with zero TRACES anywhere in the tree. The features work — the tags were simply never written — so the matrix over-reported on exactly the requirements a reviewer would most want to verify. Each is now tagged at the code that actually implements it: - JA-006 / JA-009 / JA-013 / JA-014 / JA-015 / JA-018 and IR-022 / IR-024 at their Jellyfin call sites in repository/online.rs (search, get_item's MediaStreams/People fields, Items/Resume, Shows/NextUp, FavoriteItems DELETE, get_person/get_items_by_person), plus the commands that expose them. - UR-006 / IR-006 across the lockscreen spine: JellyTauPlaybackService (the MediaSessionCompat owner), the nativeOnMediaCommand JNI intake, and LockscreenMetadata / update_lockscreen_metadata. - IR-008 at both audio-focus mechanisms — ExoPlayer-managed for audio, the manual AudioFocusRequest listener for video — and at the media-type string that chooses between them. - UR-037 (with DR-042, also untraced) on the video-library poster grid: LibraryGrid, MediaCard, and the tv/movies routes. Resolve contradictory statuses across layers, evidence first: - IR-018/IR-019 were Planned under Done URs because they were scoped to libmpv. MpvBackend is the audio-only backend and overrides neither set_subtitle_track nor set_audio_track — the trait's not_implemented() default still stands — so UR-020/UR-021 are met by ExoPlayer and by the HTML5 <video> path instead. Both IRs are re-scoped to those backends and marked Done; IT-008/IT-009 and the stale @req-planned markers in backend.rs follow. - IR-005 (MPRIS) stays Planned: there is no MPRIS/D-Bus code or dependency in the project and update_lockscreen_metadata is a no-op off Android. UR-006 is corrected to Done (Android) rather than the IR being marked Done. - A note under the IR table records where a UR is met by a different mechanism than its IR anticipated. Define the two dangling IDs the source already referenced: DR-189 (the control bar never auto-hid on a touchscreen, because its timer was armed only from onmousemove) and UT-188 (its rule test). The live-denominator assertion in extract-traces.test.ts moves 187/330 to 188/331 accordingly. Traced requirements 444 to 459; IR coverage 19/32 to 25/32.	2026-08-16 22:58:55 +02:00
dtourolle	38dd1129e5	feat(security): set a restrictive CSP and scope the asset protocol to thumbnails ... `app.security.csp` was `null`, so the webview ran with no Content-Security-Policy at all: any script that reached the web layer would have inherited the whole IPC surface. There is no known injection path today (one app-owned `{@html}`, no `innerHTML`/`eval`), so this is defence in depth rather than a fix for an open hole. `script-src 'self'` is the restrictive half — Tauri nonces SvelteKit's inline bootstrap script at build time, so no `'unsafe-inline'` is needed — together with `object-src`/`frame-src 'none'` and `base-uri 'self'`. `img-src`/`media-src`/ `connect-src` cannot be restrictive: the Jellyfin origin is typed in by the user at run time and is routinely plain http on a LAN, so they allow `http:`/`https:`. That is a wide grant for data, but it still bars `file:`/`filesystem:` and does not touch script execution. A run-time policy naming the server exactly was rejected: Tauri derives the header from immutable config when it serves the HTML, so it would mean rebuilding config and reloading the webview on every server change. `style-src` keeps `'unsafe-inline'` because Svelte compiles `style="…"` attributes into markup; `worker-src`/`media-src` keep `blob:` for hls.js's demuxer worker and its MSE object URL; `ipc:`/`http://ipc.localhost` keeps `invoke` working. `devCsp` mirrors it with the eval/inline/websocket allowances Vite's dev server needs. The asset-protocol scope narrows from `$APPDATA/**` — the storage root holding the SQLite database and the encrypted-token fallback file — to `$APPDATA/thumbnails/**`. Since DR-137 moved downloaded media to the loopback media server, `imageCache` is the only `convertFileSrc` caller left. Needs manual verification on both platforms: thumbnails, online HLS video and offline downloaded video cannot be exercised headlessly.	2026-08-16 22:58:53 +02:00
dtourolle	4c9361d020	fix(android): stop backing up credentials no key can ever open ... The app's data dir was eligible for Google cloud backup: the manifest set neither allowBackup nor any extraction rules, so the SQLite catalogue (library metadata, watch history) and the jellytau_secure_prefs credential blob were shipped to the user's Google account. Restoring that is worse than not having it — SecureStorage encrypts under an Android Keystore key, and Keystore keys are never backed up, so a restored install gets ciphertext with nothing to open it and fails auth silently while looking signed in. Backup and device-to-device transfer are both turned off. allowBackup ="false" covers API 24-30 outright and kills cloud backup on 31+; it does NOT stop D2D there, so @xml/data_extraction_rules excludes every domain from both channels. Nothing is lost: the catalogue is a rebuildable mirror of the Jellyfin server, and watch state lives on the server. The credential-load path degrades instead of erroring, because a device can still arrive at undecryptable ciphertext (an older install's backup, a Keystore key invalidated by a lockscreen change). Both backends now distinguish "nothing stored" from "stored but unreadable" and answer the second as the first: CredentialStore::load_credentials_file logs and returns an empty map rather than CredentialError::Encryption — which storage_get_access_token was turning into a hard Err and storage_get_active_session into a warning — and SecureStorage.getCredential discards the dead blob so it cannot fail every subsequent read. The result is a login screen rather than a broken session, and the next successful sign-in rewrites the store. Also removes the half-declared Android TV support: the manifest offered LEANBACK_LAUNCHER and the leanback uses-feature with no D-pad focus model, no TV layouts, and neither of the two declarations Play's TV validation also requires (touchscreen required="false", android:banner). That fails review while advertising the app to TV launchers. All four go back together when a focus pass is actually done. And raises jvmTarget from 1.8 to 17 under compileSdk 36, with matching compileOptions — AGP 8.11 already requires a JDK 17 toolchain, so 1.8 was only capping emitted bytecode. Nothing else in the build assumed 1.8. TRACES: UR-012 | IR-014	2026-08-16 22:56:32 +02:00
dtourolle	b9dab56379	ci: enforce the checks the contributor rules already required ... Four gates that were documented but unenforced, plus the flaky test that made a full-suite run untrustworthy. Rust lint/format: CLAUDE.md has required `cargo fmt` and `cargo clippy` before every commit for as long as the rule existed, yet neither ran anywhere in CI — the requirement rested on memory alone. Both now run in build-and-test.yml and build-release.yml. rustfmt and clippy are already baked into the builder image, so nothing is installed at job time. `cargo fmt --all -- --check` is strict immediately (the tree is clean). Clippy is advisory for now: ~51 pre-existing warnings mean `-D warnings` would fail on unrelated work, so the step carries a TODO to flip the flag once the backlog clears. A compile error still fails it, so it is not a no-op. Traceability threshold: MIN_THRESHOLD sat at 50 while real coverage was 86%, so nearly half the matrix could rot before the gate objected. Ratcheted to 82 with the policy written down — it only ever goes up, and is never lowered to make a red build pass. The same figure lives in MIN_COVERAGE_PERCENT so `traces:coverage` gates locally on the same bar, and a test fails if the two drift. Dangling IDs: a TRACES comment could name any well-formed ID and the extractor accepted it silently, so typos and renames that missed a call site passed unnoticed. `bun run traces:validate` cross-checks every traced ID against the table rows in requirements.md and fails with the referencing files listed. It spans UT/IT as well, which the coverage orphan list ignores by design. This currently reports DR-189 and UT-188, which are being defined separately. Flaky offlineCatalog test: the first dynamic import of the service paid ~1s to transform its dependency graph, charged to a test body against vitest's 5s default. Alone it passed; under suite-wide contention it timed out. The import is now warmed at collection time, so no test is timing the compiler — the timeout is deliberately unchanged. The store shim also drops subscribers from module instances discarded by resetModules, which previously leaked across tests.	2026-08-16 22:51:44 +02:00
dtourolle	73641e192c	chore(release): 0.7.0 ... Version bumped across package.json, tauri.conf.json and Cargo.toml (+ lock), CHANGELOG entry written from the five commits in the range rather than from the trace extractor's output — VideoPlayer.svelte alone carries dozens of TRACES, so the generated draft named most of the app's requirements for a five-commit release. DR-188 is retargeted: it recorded the native-video default as waiting on the background-audio handoff, which is now fixed (DR-196), so it records the completed flip and the evidence for it instead. Minor, not patch: the rendering path changes underneath every Android user. v0.7.0	2026-08-16 22:28:05 +02:00
dtourolle	be907b4945	fix(home): stop Next Up repeating Continue Watching ... Jellyfin's /Shows/NextUp defaults EnableResumable=true, which returns a partially-watched episode as its own series' next up — precisely the episode /Items/Resume already returns. Home's "Next Episode" row and the TV landing's Next Up row therefore duplicated Continue Watching card for card. build_next_up_endpoint now sends EnableResumable=false, and because servers predating that parameter ignore it, filterInProgressNextUpItems also drops any next-up entry whose id appears in the resume list. It is the mirror of DR-089 and sits beside it: presentation-layer de-duplication over two lists the frontend already holds. The resume filter still reads its frontier from the unfiltered Next Up list, so pruning in-progress entries cannot resurrect a stale resume card. The code changes were swept into 5e8efa25 by a concurrent `git add -A`; this carries the remainder — DR-197 / JA-036 / UT-190..192, the renumbering off the DR-196 collision that commit created, the regenerated matrix, and the requirement-count guard. TRACES: UR-059 | DR-197, JA-036 | UT-190, UT-191, UT-192	2026-08-16 22:18:06 +02:00
dtourolle	3b9a8ad695	test(player): pin the native-video default and the opt-out that must survive it ... The default has moved four times, so the risk is not which way it points but that a flip silently overrides people who chose. The previous reader was getItem(KEY) === "true", which conflates "never chose" with "chose off" — under it, flipping the default re-enables the native path for everyone who had deliberately turned it off. The three cases are pinned separately so that conflation cannot come back.	2026-08-16 22:16:39 +02:00
dtourolle	ab95f5013d	feat(player): make native Android video the default ... The two defects that were holding the flip back are fixed and verified on a device, which is the standard this default has been held to since DR-161 shipped a verified sub-path over an unverified one: - returning from background audio restarts the renderer that is actually on screen, instead of only ever reloading the <video> element (DR-196) - the letterbox bars are painted, instead of retaining whatever was last in the framebuffer (DR-194) Evidence: handoff to audio-only at 69:54 returning to video playing at 70:18, and clean bars across playback, the control bar and a rotation round-trip. An explicit stored choice still wins in both directions, so anyone who turned the flag off keeps it off — hence the null check on the stored value rather than a bare === "true", which would silently re-enable it for people who opted out. The Settings copy no longer tells users to leave it off; it now describes the toggle as the fallback to the built-in web player. The flag keeps its "experimental" name because it remains a suppressor of Rust's backend choice, never a promoter: turning it on cannot produce a native backend where Rust says HTML5.	2026-08-16 22:14:43 +02:00
dtourolle	5e8efa252e	fix(player): restart the native renderer when returning from background audio ... With native video on, coming back from background audio left a black screen: a play overlay pinned at 0:00, a seek bar at zero, and a play button that did nothing. Nothing crashed — the process stayed up and the frontend kept logging — the transition was simply dropped. The two render paths resume by different means, and exitBackgroundAudioHandoff only ever performed one of them. The webview <video> reloads off its stream URL: an $effect watches it, reinitialises HLS or sets element.src, and canplay drives the seek and play. ExoPlayer owns no element and nothing watches the URL on its behalf — native playback is only ever started by an explicit player_play_item plus adapter load, which the component issues once, from onMount. So reassigning the URL restarted precisely nothing, and since player_exit_background_audio had already stopped the handoff's audio player, the backend came back holding no item at all. That is why the play button was inert: there was nothing loaded to play. The return now re-issues that pair on the native path, in the same order as the initial load, carrying the position the audio reached. Subtitle configurations are reused from the ones resolved at mount — ExoPlayer sideloads them as MediaItem.SubtitleConfigurations and cannot accept one after prepare(). Which path to take is decided by planHandoffReturn, a pure helper in backgroundAudioHandoff.ts, so the branch is unit-testable without mounting the player. It also folds in shouldResumeOnForeground, so a pause taken on the lockscreen during the handoff still wins over the snapshot captured on the way out. Verified on device (HONOR ROD2-W09, Android 16): handoff to audio-only at 69:54, return restored native video playing at 70:18. Previously the same sequence left the player idle and black. The requirements count pin in extract-traces.test.ts moves with the new DR-196.	2026-08-16 22:10:14 +02:00
dtourolle	1285908733	fix(android): paint the letterbox bars, so stale pixels stop surviving in them ... Native video left debris in the padding around the video: the "previous frame" flash on rotation, a ghost copy of the control bar stranded in the top bar, each new clock digit drawn over the one before it (35:42 with the 1 still showing through the 2), and the sleep/quality menus leaving their imprint after closing. One cause under all of it — nothing painted those bars. The window surface is opaque; the theme is not translucent and dumpsys window shows no translucency flag. For an opaque surface HWUI deliberately does NOT clear the damaged region before replaying a frame: it assumes the view hierarchy covers every pixel it owns. Here that hierarchy is window background → video TextureView → transparent WebView, and fitSurfaceToScreen sizes the TextureView to the letterboxed video rect. So the bars were the window background's alone to paint, and setTransparent(true) cleared it to TRANSPARENT — leaving them painted by nobody, with whatever was last in the framebuffer surviving there. The window background now stays opaque black while compositing. It cannot hide the video: the TextureView is drawn on top of it, and the WebView's own background is what lets the picture through. Three previous attempts missed because they aimed at the window's rotation animation and at TextureView frame-retention — two postOnAnimation hops, an onSurfaceTextureUpdated reveal, then ROTATION_ANIMATION_JUMPCUT with FLAG_FULLSCREEN to make it stick. The pixels were never the animation's, which is also why the artefact reproduces standing still, with no rotation involved. Those are removed. The alpha-hiding among them actively made things worse: it blanked the one view that reliably paints its own rect. FLAG_FULLSCREEN goes too — it fought edge-to-edge insets for no gain. Verified on device (HONOR ROD2-W09, Android 16): reproduced with native video on — ghost control bar in the top bar, doubled clock digit — then absent after the fix across playback, the control bar and a rotation round-trip. DR-194 is rewritten to record the real mechanism and marked Done.	2026-08-16 21:51:14 +02:00
dtourolle	8e98e1c37a	test(player): answer the commands the tap-surface tests actually render ... VideoPlayer.tapSurface.test.ts deliberately does not mock $lib/api/bindings — it renders the real component against the real bindings, which bottom out in the globally mocked `invoke`. That mock resolves `undefined` for every command, so any command whose result is *rendered* blows up: the quality picker assigns the result straight to state and the template then reads `streamingQualities.length`, which throws on undefined. It threw asynchronously, outside any test, so the suite reported 4 unhandled errors while every test still passed — the state vitest warns "might cause false positive tests". Answering the two rendered commands removes them. Authored in the main checkout; brought in here and verified: 83 files, 1009 tests, and the unhandled-error count drops from 4 to 0. v0.6.0	2026-08-16 21:20:55 +02:00
dtourolle	440d7a01a9	chore(release): 0.6.0 ... Android native video renders a picture, and its transport works. The path shipped once as audio with no picture and was reverted with the compositing named as the suspect. It was not the compositing: five independent defects sat between ExoPlayer and the screen, each able to produce that symptom on its own — the app shell painting over the surface through a CSS rule aimed at an attribute nothing set, a poster card with no way to lift on a path that renders no <video>, JS bridges racing the page load and losing permanently, a SurfaceView that was never detached, and a frontend that told Rust a webview element was playing when none existed, so every play/pause intent was aimed at something that was not there. Native video stays opt-in. Turning it on surfaced a further unverified path — the background-audio return is written only for the webview element — and rotation still needs device confirmation. Minor rather than patch: the player's touch behaviour changes for everyone (the control bar now auto-hides on touchscreens, and the system bars go away with the player), not only for those who opt into native video.	2026-08-16 21:14:08 +02:00
dtourolle	dccb5f53dd	fix(android): stop the rotation cross-fade replaying the old video frame ... Rotating with native video on shows the previous frame flashing in what become the letterbox bars. It reads as a TextureView artefact — the view retains its last frame, so between the rotation and fitSurfaceToScreen() landing that frame sits at the old size — and two fixes were built on that reading: 1. reveal after two postOnAnimation hops. An animation frame is not a video frame; at 24fps the next decoded frame can be several vsyncs away. 2. reveal on onSurfaceTextureUpdated, i.e. when a real frame lands. This meant owning the SurfaceTextureListener and handing ExoPlayer the Surface directly instead of via setVideoTextureView, which installs its own and leaves us blind to frame arrival. Neither stopped the flash. The mechanism is the WINDOW's rotation animation: Android cross-fades a screenshot of the old orientation, that screenshot holds the old video frame at the old size, and nothing at the TextureView level can reach it. The app cannot pre-empt the screenshot either — onConfigurationChanged fires after it is taken. So the animation itself has to go: ROTATION_ANIMATION_JUMPCUT. That was accepted and silently ignored, and the platform said why out loud — "VRI[MainActivity]: setLayoutParams: not fullscreen" — because the attribute is honoured only for a fullscreen window. FLAG_FULLSCREEN is therefore set with it, scoped to while native compositing is active so the rest of the app keeps its normal animation. After the change that complaint is gone from logcat. The frame-arrival reveal is kept: it replaces a fixed-timeout guess with a real signal, and its timeout is required rather than defensive — a resize while paused means no new frame is ever coming, and revealing a stale frame beats a permanently black player. NOT CONFIRMED FIXED on device. The forced-rotation harness (settings put system user_rotation) proved unreliable here, and screenrecord fixes its canvas at start, so a rotation inside a recording never changes frame dimensions — which defeated two separate attempts to measure this. DR-194 is recorded as "Needs device verification" rather than Done. android-native-video-2026-08-16	2026-08-16 18:46:15 +02:00
dtourolle	c142568230	fix(player): make transport reach the player that is actually rendering ... Play/pause did nothing on the Android native video path — from the on-screen tap, from the control bar, and from a direct player_toggle invocation — while seek and skip kept working. That asymmetry was the whole clue: seek decides in player_seek_video, transport decides in toggle_playback. DR-195 is the cause. `html5_playing` is Rust's record of "a webview <video> is active and in this state", and toggle_playback/play/pause all route transport to that element whenever it is set. The player route mirrored element state into it UNCONDITIONALLY — from handleReportStart and, fatally, from handleReportProgress, which VideoPlayer calls on a 10-second interval. So on the native path the frontend re-declared every ten seconds that an element was playing when none existed, and every transport intent was emitted into the void. It also explains the flashing: the control bar and the JRay overlay both key off isPlaying, which was being contradicted on every tick. The mirror now lives in mirrorElementStateToRust() in VideoPlayer, gated on useHtml5Element — the only place that knows whether an element renders at all. The route cannot tell the paths apart, which is exactly how it came to lie. DR-193 hands transport authority back to the native backend when an item loads into it. Necessary but insufficient alone: the progress interval put the flag straight back, which is why the first device test after it still failed. DR-192 presents native video through a TextureView instead of a SurfaceView. A SurfaceView renders on its own layer outside the app window and punches a transparent region through it, and everything drawn above that hole — here, the entire Svelte UI — depends on that composition path. The overlay dropped its incremental damage: the DOM advanced (slider 476 -> 479 across three seconds) behind a screen showing neither, so the progress bar froze, controls would not fade and rotation lost the transport UI, while structural DOM changes got through, which is why the play overlay always appeared to work. It supersedes DR-191, which forced redraws in a loop and treated the symptom. DR-194 hides the video view across a resize and reveals it two frames later. A TextureView retains its last frame, so between a rotation and the re-fit landing that frame is stretched across the old rect and the previous frame flashes in what should be the letterbox bars. Verified on device (Honor ROD2-W09, Android 16) by driving ADB and reading the live DOM over the devtools socket: surface tap pauses (position frozen across 12 seconds, overlay raised, transport flipped) and resumes; the control bar does both. UT-189 drives the real 10-second interval under fake timers — an earlier version asserted on a freshly mounted player, passed with the guard deleted, and guarded nothing. Still open, and deliberately not claimed: DR-192's effect on the overlay repaint is unverified on device, DR-194's letterbox reset is untested, and the native default (DR-188) stays off pending DR-190, the background-audio return.	2026-08-16 18:03:22 +02:00
dtourolle	95129d04a3	fix(player): make Android native video actually visible, and usable ... DR-172 reverted native video to opt-in after it shipped as audio with no picture, naming the compositing as the suspect. The compositing was fine. Five separate defects sat between ExoPlayer and the screen, each able to produce that exact symptom on its own, and each invisible to the others. DR-185 — the app shell painted over the surface. app.css clears the page's opaque layers through three selectors, one of which targets `[data-app-shell]`, an attribute NO component has ever set, in any commit. The shell paints --color-background across the whole viewport and VideoPlayer stacks above it, so the WebView composited opaque no matter what else was cleared. Invisible three ways over: the CSS is valid, the selector is plausible, and a rule matching nothing looks exactly like a rule matching something already transparent. DR-182 — nothing could lift the poster card. Every markMediaReady() call site is an HTML5 <video> event, and the native branch renders no element, so the black title card covered the surface for the entire session. The first fix hooked `player://position-update` / `player://state-changed`; those channels are never emitted by the backend, so it passed a test that fired them by hand and did nothing on a device. Driven from the player store now, as the seek bar already was. DR-183 — the JS bridges raced the page load. Installed 500ms after onCreate by walking the view tree, while WebView binds injected objects at page-load time, and the identity guard then declined to re-inject forever. setTransparent(true) could never arrive. Installed from WryActivity.onWebViewCreate instead, which wry calls immediately before the first loadUrl. DR-184 — the SurfaceView was never detached. detachVideoSurface had no callers anywhere, mirroring the DR-151 defect: every native video left its surface parented to the content view and the next one stacked another beneath it. DR-191 — the overlay stopped repainting. Incremental damage (the clock's text, the control bar's opacity) never reached the screen while structural changes did, so the progress bar froze, the controls would not fade, and the play overlay appeared to work because it is added and removed from the DOM. Driven from the Activity via postInvalidateOnAnimation while compositing is on. Two UI defects only this path could reveal came with them: isPlaying froze at its initial value, leaving the play overlay dimming and covering the video (DR-186), and the control bar's auto-hide was armed solely by mousemove, which a touchscreen never fires (DR-189). Immersive mode now applies on entering the player rather than only via the fullscreen button (DR-187). Verified on a device (Honor ROD2-W09, Android 16): logcat carries `WebView transparent = true` and `Marking media ready` with video on screen — the pair DR-172 went looking for and could not find — and skip, seek, rotation and subtitle rendering were exercised by hand. The default stays OFF (DR-188). Turning it on surfaced a further unverified sub-path: returning from background audio is HTML5-only, so playback stays dead (DR-190, proposed). Shipping it would have repeated DR-161 exactly — a verified sub-path made default over an unverified one.	2026-08-16 15:28:10 +02:00
dtourolle	f0f98feae8	fix(player): strip the burn-in the server puts back into its own transcode URL ... The negotiation asks for no subtitle stream (DR-176), but when PlaybackInfo answers with a TranscodingUrl we played that URL verbatim — and the server built it from its own subtitle verdict. Jellyfin's StreamInfo.ToUrl appends SubtitleStreamIndex and SubtitleMethod whenever it picked a track, so the burn-in we had just declined came straight back through the URL, turning a remux into a full frame-by-frame re-encode. Live TV never declined it at all: open_live_stream sent no index, so the server applied the channel's default track, and broadcast subtitles are DVB bitmaps that NormalizeSubtitleEmbed converts to burn-in on sight. without_server_chosen_subtitle() drops SubtitleStreamIndex, SubtitleMethod, SubtitleCodec and alwaysBurnInSubtitleWhenTranscoding from any URL the server built — matched case-insensitively, as Jellyfin binds query keys — and re-appends the -1 sentinel, because an absent index is not "none", it is "you choose". Applied at both adoption points, plus the sentinel in the live-stream negotiation body and its fallback URL.	2026-08-16 14:56:40 +02:00
dtourolle	d9e1e256e9	fix(auth): trim the username before authenticating ... The login form guarded on `username.trim()` but sent the raw value, so a trailing space from a soft keyboard reached the server verbatim. Jellyfin reports that as an unknown user, which surfaces as a 401 indistinguishable from a wrong password — the user is certain of their credentials and the app insists otherwise. Normalising in AuthManager rather than the form keeps it on the path every caller uses, alongside normalize_url. Only surrounding whitespace is stripped; interior spaces are legal in Jellyfin usernames.	2026-08-16 11:31:34 +02:00
dtourolle	42868fc2e6	feat(login): reveal-password toggle, and stop the keyboard editing credentials ... Add an eye/eye-off button inside the password field so a typed password can be checked against what was intended — the difference between "wrong password" and "wrong keyboard" was previously invisible. `bind:value` is not allowed alongside a dynamic `type`, so the field is wired manually via value/oninput; unlike branching on two separate inputs, this keeps focus and caret position when the toggle is pressed. Both fields also get autocapitalize/autocorrect/spellcheck off and proper autocomplete hints. The Android soft keyboard was free to capitalise or autocorrect the username, which silently changes a credential the user believes they typed correctly.	2026-08-16 11:31:27 +02:00
dtourolle	c0c6c5023e	fix(player): resume a transcoded video by seeking, not by asking for a stream that starts mid-item ... A resumed transcode played nothing at all: every segment came back 400, hls.js exhausted its retries and gave up, while the same episode from the beginning was fine. Jellyfin builds each segment URI by echoing the master playlist's query string into it, and its segment handler opens by rejecting any request carrying StartTimeTicks > 0 (ArgumentException → 400). So one resume position on the playlist is copied onto every hls1/main/N.ts and 400s all of them — the `> 0` being exactly why starting from the beginning survived. HLS does not need the parameter: a playlist spans the whole item and asking for segment N *is* the seek. It is removed from the URL builder entirely rather than conditionalised — the builder cannot know whether its response will be segmented — and the position becomes a seek issued once the player has loaded. The progressive /Audio/universal builder behind the background-audio handoff has no segments and keeps its StartTimeTicks, which is why audio-only handoffs resumed correctly and video ones did not. Completing that across the boundary, since the URL no longer starts where the caller asked: - reloadSource(url, position) now means "reload and resume AT this absolute position": it seeks the element once the source is playable and clears the transcode offset to zero. It previously set the offset to the position and seeked nothing, which was correct only while the URL itself began there — left in place it would have shown 20:00 on the scrubber while the opening titles played, with no seek ever happening. - The transcoded resume path in the player page collapses into the same "seek after load" branch direct streams already used. - VideoPlayer's background-audio return does the same: no base, seek to the absolute position. - The stale test asserting StartTimeTicks is present is rewritten to keep its other half (an HLS master playlist, never a progressive stream.mp4, carrying the chosen source and audio track). TRACES: UR-004, UR-005, UR-019, UR-021, UR-074 | DR-181 | UT-182, UT-183	2026-08-16 11:08:42 +02:00
dtourolle	521acc75fd	build(android): add a side-by-side release build for validating R8 ... R8 has broken release APKs here before by stripping the JNI-loaded player and security classes, and the only way to reproduce that was to build with the real signing key and clobber the install you actually use. `./scripts/build-and-deploy.sh release --device --debug` now builds a fully minified release APK — exactly what ships — into the .debug applicationId slot, signed with the local debug keystore: release com.dtourolle.jellytau 0.5.5 release --debug com.dtourolle.jellytau.debug 0.5.5-debug-release debug com.dtourolle.jellytau.debug 0.5.5-debug It shares the applicationId *and* the signature with the plain debug build, so the two replace each other cleanly rather than colliding, and the versionName suffix says which is currently installed. No real key is needed, so the side-by-side path deliberately skips write-keystore-properties.sh. The flag reaches Gradle as JT_SIDE_BY_SIDE=1. CI never sets it, and the release manifest merges byte-identical without it — verified both ways through processUniversalReleaseMainManifest. deploy-android.sh and build-and-deploy.sh learned the flag too, since the APK path is unchanged but the package to launch is not.	2026-08-16 10:42:59 +02:00
dtourolle	886cbcb29a	docs(changelog): backfill every release, and date each fixed defect ... CHANGELOG.md stopped at v0.5.0 and had gaps below it. Every tag from v0.0.1 to v0.5.5 now has an entry, written from the commit bodies rather than the subjects. Entries before v0.1.2 are shorter and marked as reconstructed after the fact -- the commit messages of that era ("many changes", "Playback fix") do not record causes. docs/defect-windows.md is new: for each fixed defect, the releases it was actually present in, with the evidence for the dating recorded per row so a row can be disputed. Dated with `git log -S` on the defective token, not by blaming the lines a fix removed -- that reliably lands on whatever last touched the adjacent lines rather than on the defect's origin, and was used only to shortlist. Twelve defects date to the v0.0.1 proof of concept and shipped for seven to eight weeks. They are not regressions but original assumptions nothing exercised, four of them outright latent: the videoBitrate casing was harmless until a quality picker existed to select against, and the unconditional Range header was inert until that fix made transcoded downloads actually transcode -- so DR-170's code dates to v0.0.1 while its corruption window is the single release v0.5.1. Three others are plumbing built and never connected: get_next_up_episodes accepted a series_id with no caller until v0.3.0, the sync queue ran with neither producer wired, and both watched-state backend halves sat unused. No automated check sees these; the code is present, tested and reachable in principle. Also corrects the v0.5.5 entry. fa7cb6e9 and dcf08f30 are the same diff off the same parent -- a local commit and its Gitea PR-merge twin -- and a merge chain pulled the local one into master during v0.5.5. git log v0.5.4..v0.5.5 therefore lists an autoplay fix that changed no file in the release; nextEpisodeService.ts is byte-identical across the tag boundary. That fix shipped in v0.0.2 and has not regressed. It is the one case where reading the changelog off commit subjects would have produced a false entry. scripts/build-android.sh and src-tauri/src/repository/online.rs are also modified in this tree by a concurrent session and are deliberately left uncommitted.	2026-08-16 10:40:33 +02:00
dtourolle	2cc39cd7fd	build(android): install the debug build alongside release as its own app ... Testing a debug build meant uninstalling the real one first: same applicationId signed with a different key is INSTALL_FAILED_UPDATE_ INCOMPATIBLE, so every experiment cost the app's settings, credentials and offline cache. The debug build type now carries applicationIdSuffix ".debug" and versionNameSuffix "-debug", so it installs as com.dtourolle.jellytau.debug ("JellyTau Debug", 0.5.5-debug) with its own data directory — two independent apps on one device. Only the *application* id is suffixed. Kotlin classes stay in the `namespace` package com.dtourolle.jellytau, so the JNI loadClass lookups in player/android/mod.rs, the manifest <service> entry and the R8 keep rules are untouched, and the FileProvider authority was already ${applicationId}-relative. Launcher names come from the appLabel / activityLabel manifestPlaceholders rather than resValue, which would collide with Tauri's generated strings.xml; release resolves them back to @string/app_name and merges byte-identical. deploy-android.sh reports the target package and explains an UPDATE_INCOMPATIBLE failure instead of leaving it raw; logcat.sh takes a debug|release argument (it was filtering on com.jellytau.app, a package that has never existed) and attaches by pid when the app is running. Verified: aapt2 badging on the built APK reports com.dtourolle.jellytau.debug / 0.5.5-debug / "JellyTau Debug", and the release manifest merge is unchanged.	2026-08-16 10:36:48 +02:00
dtourolle	e457a9884c	chore(release): 0.5.5	2026-08-16 10:23:38 +02:00
dtourolle	de1c13e72f	fix(player,reporting): report real positions, and count an audio-only episode as watched ... Returning to the foreground before the background-audio stream had started playing handed the frontend 0.0s, so the video reloaded at StartTimeTicks=0 — the episode restarted from the beginning — and the stop report that followed wrote that zero to Jellyfin as the resume point. Caught on device: locked at 18.4s, unlocked 3.5s later with ExoPlayer still IDLE. The base that turns a handoff's relative timeline into the episode's is applied once at the native tick boundary (DR-159), so before the first tick nothing has applied it. The same blind spot covers webview-rendered media, where nothing is loaded into the native backend at all and its position is a permanent 0 — which is why 14 of 14 stop reports in a 35-minute trace were zeroes, one landing 40s after the frontend had correctly reported 15:22 for the same episode. - absolute_position(): the maximum of the backend's reading, the last position webview media reported, and the handoff base. Exact rather than heuristic — at most one term is ever meaningful, and the base is a floor the stream cannot physically be behind. duration() gains the same fallback. - Withhold zero-position stop reports. A zero is never information, and Jellyfin stores the reported position as the resume point, so sending one only ever destroys a real one. - Report progress from the controller's own position ticks, through the 30s throttler it already shared with the native audio path. /Sessions/Playing/Progress was previously requested zero times in 35 minutes. - Report a finished audio-only episode stopped at its runtime before advancing, so Jellyfin's 90% rule marks it played. Nothing else can: the webview is suspended and its <video> was torn down at the handoff. - Split the handoff by source — a downloaded file takes no base and a real seek, a stream keeps its StartTimeTicks base and no seek — and stop routing a downloaded handoff's absolute seek through the stream rebuild, which refuses a non-remote source outright. Reports go through a PlaybackReportSink, which also collapses three copies of spawn-a-task-and-hope into one and is what let each of these be written as a failing test first. TRACES: UR-005, UR-025, UR-040, UR-071 | DR-178, DR-179, DR-180 | UT-176, UT-177, UT-178, UT-179, UT-180, UT-181	2026-08-16 10:23:00 +02:00
dtourolle	5096c01960	fix(player): restore the subtitle sidecar work dropped by the previous commit ... The previous commit was assembled from a tree read before 13264e22 landed, so committing it reverted that commit's changes: the image-based subtitle filtering in device_profile/types, subtitleTracks and its tests, the regenerated bindings, and the VideoPlayer menu wiring. Nothing was lost — the working tree held both changes throughout. This restores those files to the merged state, leaving both the subtitle fix and the play-session fix in place. TRACES: UR-020, UR-004 | DR-176 | UT-168	2026-08-16 10:20:22 +02:00
dtourolle	2d67b0e4f5	fix(player): give every transcode its own play session, and stop the one it replaces ... Switching bitrate mid-film stalled playback. The server served the new playlist and then rejected its segments: 400 on hls1/main/0.ts, six times over 25 seconds, never recovering, while the UI logged "Streaming quality changed" as if nothing were wrong. Jellyfin keys a transcode job by device and play session. Every stream URL this app built carried the same hardcoded DeviceId and no PlaySessionId at all, so the second stream for an item was indistinguishable from the first and nothing ever stopped the old ffmpeg. Re-opening a stream is not rare — a quality switch, a transcoded seek and an audio-track switch all do it. Replayed against the server, a second stream opened for a live job's item alternates per attempt between serving bytes and 400ing, which is why it read as flaky rather than broken. begin_video_play_session mints a session id per open and reports the one it supersedes; the URL builder stops that job (DELETE /Videos/ActiveEncodings, un-retried — a slow stop must not delay playback) before returning. Putting it in the builder rather than in each caller covers every re-open path by construction. adopt_video_play_session takes ownership of the job the server starts itself when PlaybackInfo answers with a TranscodingUrl: without it the first switch on a stream has nothing to stop and collides with what is playing. Two client faults made the same incident worse and go with it: - The fatal-HLS-error handler added the transcode seek offset to a position that already included it. Past roughly the halfway mark of a film the doubled value cleared the "near end" threshold, so any transient network error was reported as end-of-stream and autoplay skipped to the next item — precisely when a quality switch had just made the offset large. The decision now lives in hlsRecovery.ts, against the absolute position. - The HTML5 reload primitive resolved on its own canplay timeout, so a reload the server never served reported success. The picker showed a quality that was not playing and the caller had nothing to revert. TRACES: UR-074, UR-004 | DR-177 | UT-173, UT-174, UT-175	2026-08-16 09:47:27 +02:00
dtourolle	13264e225b	fix(player): never let the server burn a subtitle in, and never offer one we cannot draw ... Reported as "subtitles are shown even when off", and no toggle in the app cleared them — because they were not the app's subtitles at all. The server was painting them into the video. `PlaybackInfo` omitted `SubtitleStreamIndex`, which does not mean "none": the server then honours the source's own default/forced flag. On the reported episode that default is a PGS track — a bitmap, which cannot go out as a sidecar — so the server fell back to `SubtitleMethod=Encode` and composited it onto every frame. Confirmed against the live server, which answered the same PlaybackInfo request two ways: with the index omitted it returned `SubtitleStreamIndex=2` + `SubtitleMethod=Encode` and a `SubtitleCodecNotSupported` transcode reason, and its ffmpeg command carried `[0:2]…[sub];[main][sub]overlay_qsv=…`; with `-1` it selected no subtitle stream at all. The cost landed on the video, not the subtitle: burn-in rules out remuxing, so a stream that only needed its audio transcoded was re-encoded frame by frame. Three parts: - The negotiation asks for `SubtitleStreamIndex=-1` and advertises every text format we can render (srt/subrip/ass/ssa/vtt) as `External`. - The stream URL says the same thing, because the negotiation is not what opens most streams: a quality switch, a transcoded seek and an audio-track switch each rebuild the URL on their own, and an omitted index there lets the server pick the default track back up out of whatever session state it still holds. - The picker offers only subtitles the app can actually draw. Each subtitle stream now crosses the boundary carrying `supports_external_delivery`, decided in Rust where the codec vocabulary belongs, and `None` for anything that is not a subtitle so a `false` cannot be misread as a verdict. `subtitleStreamsOf()` drops the rejected ones — and since that one function feeds the menu, the `<track>` children and the native play request alike, a bitmap track disappears from all three without its URL ever being fetched. Only an explicit "no" hides a track; a stream carrying no verdict behaves exactly as before. Nothing is lost by refusing burn-in: the app already fetches the text tracks and draws them itself (UR-020), so the server's composited copy was always redundant. Image-based tracks are consequently not offered, which is honest rather than a regression — the renderer cannot composite a bitmap, and the old behaviour paid for them by making the whole stream unwatchable. Tests were written first and observed failing: the Rust one would not compile against a field that did not exist, and the frontend one resolved a URL for the PGS track it was supposed to drop. Carries with it the in-flight per-stream `PlaySessionId` work in online.rs, whose hunks sit inside the same request builder and could not be separated from these. TRACES: UR-020, UR-004 | DR-176 | UT-168	2026-08-16 09:47:09 +02:00
dtourolle	041969f446	fix(player): stop the server burning subtitles into the picture ... A transcoded episode stalled every few seconds and seeking took five to nine seconds to produce a frame. Neither was a seek bug: both seeks in the capture landed correctly. The stream itself could not keep up. The episode was HEVC video, E-AC-3 audio, and a PGSSUB subtitle track. Only the audio needed transcoding — the device profile supports HEVC and the server would have remuxed the video untouched. But the PlaybackInfo request omitted SubtitleStreamIndex, and omitting it does not mean "no subtitles": the server then honours the source's default/forced flag and picks a track itself. It picked the PGS one. PGS is a bitmap, and the profile advertised only srt/vtt as External, so it could not go out as a sidecar — leaving SubtitleMethod=Encode, burn-in. Burn-in is a video cost, not a subtitle cost. Compositing rules out remuxing, so the whole HEVC stream was re-encoded to h264 frame by frame. The server could not sustain that in real time: the buffer never grew past one segment and playback ran waiting -> HLS error -> canplay -> three seconds of picture, indefinitely, while each seek restarted the encoder from scratch. TranscodeReasons named it — SubtitleCodecNotSupported — but nothing in the log connected that to the stall, so the diagnostic now says which track it is declining and why. Ask for SubtitleStreamIndex=-1 explicitly, and advertise every text format we can render (srt/subrip/ass/ssa/vtt) as External so a subtitle can only ever arrive as a sidecar. Nothing is lost: the app already fetches subtitle tracks itself and draws them over the video (UR-020), so the server's composited copy was always redundant. Image-based tracks are consequently not offered, which is honest rather than a regression — the renderer cannot composite a bitmap, and the previous behaviour paid for them by making the stream unwatchable. The policy lives beside the other device-profile rules in Rust, where it is testable without a device. TRACES: UR-020, UR-004 | DR-176 | UT-168	2026-08-16 09:23:39 +02:00
dtourolle	1a9805f0f3	fix(downloads): queue the whole album, and make every queued track findable offline ... An album download put a handful of its tracks on the device while the button reported the album as downloaded. Two independent gaps, one shared cause. - `download_album` read its track list from `items WHERE album_id = ?` — the local catalog cache. Jellyfin does not return `AlbumId` on every listing endpoint, so tracks cached from one of those sit in `items` with a NULL `album_id` and are invisible to that query. On the reported database three whole albums (18, 12 and 9 tracks) had it NULL on every track; a partially linked album queued only the linked subset. - The frontend then resolved one stream URL per track from its own list and paired it with the returned row ids by position. The ids came back in the backend's `index_number` order over a different set of rows, so a row could be handed another track's URL and any track past the end of the shorter list was never started. On Android that loop also stopped wherever the webview was suspended. - `album_id` is what `OfflineRepository::get_items` joins a track to its album on, so a track that did download stayed invisible under its album offline — the same missing link seen from the other side. The operation now belongs to Rust end to end: - `HybridRepository::get_album_tracks` asks the server what the album contains. Cache-first `get_items` is right for browsing and wrong for deciding what to download; it errors offline so the caller falls back to the ungated local catalog, keeping the queue-while-offline flow. - `queue_album_tracks` writes the album link onto every track it queues, and creates an `items` row for tracks the cache has never seen. - Stream URLs resolve here, through the existing reconnect resolver, now scoped to the rows just queued so one album cannot start every unrelated pending row. Only the album id crosses the IPC boundary. - `album_file_names` gives each track its own file. A title repeated inside one album (deluxe edition, two discs) mapped to one path, so those downloads overwrote each other. Re-tapping download on a broken album heals it: missing tracks are queued and the tracks already on disk get their link. `download_series`/`download_season` still derive their episode lists from the cache the same way and want the same treatment. DR-173, UT-170..172. Rust 673 tests, frontend 975 tests, svelte-check and check:boundary clean. Note: this tree is shared with a concurrent session. Only the files above are committed; docs/traceability.md is left to be regenerated once that work lands.	2026-08-16 09:20:32 +02:00
dtourolle	82b6982d68	fix(player): use a speedometer icon for the streaming quality selector ... The bitrate ceiling button reused a cloud-download glyph, which read as a download action rather than a bandwidth setting.	2026-08-16 08:25:43 +02:00
dtourolle	3363ff7f08	Merge branch 'master' into worktree-mosaic-library ... # Conflicts: # scripts/extract-traces.test.ts	2026-08-16 00:51:46 +02:00
dtourolle	9858b7cb92	chore(release): 0.5.4 v0.5.4	2026-08-16 00:46:17 +02:00
dtourolle	f46d7bf676	fix(player): make native Android video opt-in again — it shipped as audio with no picture ... DR-161 flipped experimentalNativeVideo on by default so picture-in-picture could shrink a real video surface. On a device that shipped sound with a blank screen. The decode path was never at fault. Logcat shows ExoPlayer running and feeding a live SurfaceView with an active BufferQueue. The compositing was: the SurfaceView sits behind the WebView, and the step that clears the opaque layers above it never took effect — `WebView transparent = false` is logged, `= true` never appears. The video was rendering correctly the whole time, behind an opaque page. This is precisely the defect the flag existed to contain; VideoPlayer.scrubRegression.test.ts had already recorded that "the native SurfaceView has never been visible through the webview". Enabling it by default shipped a verified decode path on top of an unverified display path. Reverting costs nothing that matters: PiP does not depend on it — DR-160 drives PiP from the WebView <video> — and working video outranks PiP showing a native surface. The flag stays in Settings, now described as incomplete rather than as a performance win, so anyone helping test it still can. Fixing the compositing is the prerequisite for trying this default again (DR-172).	2026-08-16 00:42:56 +02:00
dtourolle	74bffea650	Merge branch 'fix/autoplay-issues' ... Records ancestry only: all three of its changes are already on master, content-identical, having been applied by cherry-pick rather than merge — the reportMediaId snapshot in VideoPlayer, the `?restart=true` hand-off in nextEpisodeService, and the POSIX-sh rewrite of the traceability CI loop. The branch is 167 commits behind, so the files it touched conflicted with their own newer selves; every conflict resolved to master's version. The resulting tree is byte-identical to the pre-merge tree.	2026-08-16 00:14:25 +02:00
dtourolle	7e1f0e0547	Merge branch 'master' into worktree-mosaic-library ... # Conflicts: # docs/traceability.md	2026-08-16 00:06:15 +02:00