Sharpening, noise reduction and clarity were written in parallel and each
rewrote the same two tests, which had counted one fused block per operation —
true only while every operation was a point function.
Kept the exclusive-or formulation: each operation must reach exactly one of
the two stages. A count cannot tell "moved to the detail stage" from
"vanished from both", and that ambiguity is what broke these tests three
times over.
The merge left two fragments of the versions it replaced — a loop over a set
that no longer exists, and the tail of an assertion whose head was gone.
The loop is not restored: `point ^ neighbourhood` already asserts per
operation what it checked over the set. The assertion is, because it catches
a different fault from the exclusive-or — a block in the shader that nothing
in the chain asked for, rather than an operation in the wrong stage.
Capture sharpening and noise reduction were written in parallel and both
claimed `order: 110`; the codegen refuses that, which is the guard working —
two nodes at one order is an ambiguous pipeline and operation order changes
the result.
Resolved in noise reduction's favour, for the reason its own `placement:`
block already gives: denoising is a repair and everything else in this stage
is an enhancement. Sharpening or adding clarity to a noisy frame amplifies the
grain along with the detail, and no later pass can separate them again. So the
detail stage now runs noise reduction, capture sharpening, clarity, texture,
and the other three shift up a slot to keep the multiple-of-ten convention the
rest of the chain uses.
Noise reduction was also missing the required `attributes:` key. The order
collision aborted the build before the attribute check could report it, so it
arrived looking like one fault and was two.
A layer holds a full chain and fuses it into the colour dispatch, so the
panel - which names no operation - would have offered a noise reduction
slider inside a local adjustment. It could not have worked: the detail stage
is its own dispatch, running after the masks are already applied, with
nowhere to be handed one layer's mask. The control would have moved and done
nothing. Filter the layer's chain to the operations that can honour it.
Activating every operation now activates a kernel too, and a kernel emits no
block in the fused shader. Assert that each operation reaches exactly one of
the fused pass and the detail chain, rather than counting fused blocks
against the length of the chain.
Both tests composed only the fused half and rendered it through the plain
path. That was correct while every operation was a point operation; with a
kernel in the chain the fused pass stops short of the output transform, so
the render was rejected and the operation-block count was one too high.
Compose both halves and dispatch them together, and assert that each
operation reaches exactly one of the two stages rather than counting blocks
- so the next kernel added extends the coverage instead of breaking it.
An import read every byte of every original, uploaded them, and then left the
grid to fetch a preview range back out of each one over the network — for
files that had been on this machine minutes earlier.
The pixels are now made from the bytes already in memory, on the fast path
FR-CAT-3 names: locate the camera's own embedded JPEG, decode a few hundred
KB, downscale, orient. Never a demosaic. A file with no usable preview yields
none, which is not an error and simply leaves the grid to fetch one later.
The filing waits for the upload, and only the filing. The shard store is keyed
by `oc:fileid` (FR-NC-5) and that does not exist until the server has the
file — so the thumbnail is made from the local copy and held until an id can
be attached to it. One listing per folder supplies every id at once, rather
than a PROPFIND per photograph over a link that may be mobile data.
Best-effort throughout: a thumbnail that cannot be filed costs the grid one
preview fetch later, and failing an import over it would be the wrong trade.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Re-inserting a card that has already been imported produced a folder full of
`-1` copies. Both halves of the placement logic treated a taken name as a
collision to rename around, which is right for the case they were written for
— two cameras both writing IMG_0001.CR3 — and exactly wrong for the far more
common one, where the taken name is the same photograph.
Locally this cannot be answered from the catalog. On a library whose catalog
describes a *server*, a file sitting in the local destination has no row to be
found by, so the only way to know whether it has already been copied is to
look. The destination folder is listed once per folder rather than probed per
file: a card is two thousand frames landing in a handful of days.
Remotely the same question is one PROPFIND that was already being made to
resolve the name, so `upload_original` now returns `Placed::AlreadyThere`
instead of inventing a second copy of work that is already safe. The count is
reported apart from `uploaded`, because "12 already on the server" and "12
uploaded" are different answers to whether this run backed anything up — and
apart from the local duplicate count, because these files *were* copied here.
Name plus length decides it, not a digest: this runs before any transfer, and
hashing to answer it would read the whole card to avoid reading the whole card.
A camera reusing a filename after IMG_9999 writes a different number of bytes
essentially always, which leaves the rename for the case it is really for. The
digest tier still catches the same frame under a different name.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The Import button went into the library header unconditionally, so an Android
user got a page that opens, finds nothing, and cannot be pressed — worse than
no page at all, because it reads as broken rather than as absent.
`dr_plat::imports_supported()` answers the question the interface actually has,
which is not "did we find a volume". An empty list on Linux means plug one in;
false here means it cannot be done on this device however hard the user tries.
It is false on Android for two reasons that both have to be fixed before it
changes: there is no mount table to read and no path to type, and nothing
implements WritableStorage except LocalStorage.
The button is hidden rather than disabled. The buttons beside it come and go
with the selection — unavailable now, available in a moment — where this one
never will be here, and a permanently disabled control teaches the reader that
the row lies.
What this gates is the interface, not the engine. dr-ingest takes storage
traits and never a path, and cross-compiles to aarch64-linux-android today; it
should need no changes when a SAF implementation lands.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
every_operation_generates_compilable_wgsl and the_whole_chain_at_once_compiles
both rendered through the fused half only. A neighbourhood operation
contributes no fused fragment, so its kernels went uncompiled — and once one
is active the fused pass hands on linear working values, which plain render
refuses. Both now compose both halves from the one graph, and the fused
block count excludes the operations the detail chain names.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A test that cannot be run cannot be checked by running it, and a number
copied out of a test run agrees with whatever the code did on the day.
Each asserted kernel width, tolerance and overshoot bound now carries the
arithmetic that produces it -- the shorter edge, the sigma, the
truncation at two sigmas, and where the rounding falls -- so a reader can
verify the expectation against the recipe without a GPU or a compiler.
Also records the two places where a bound is a bound and not a
measurement: the tolerance in the frame-fraction test is exactly what
rounding a kernel to a whole pixel costs on the smallest frame it uses,
and the halo test's floor and ceiling bracket a peak derived from the
step, the soft limit and the midtone taper rather than from a run.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The fused-fragment check in lib.rs cannot see a detail pass: it is a
separate shader composed at a resolution compose() never knows. The
kernel's own test now scans the block the composer wrapped, with comments
stripped so prose about the keyword cannot fail a test about the code.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
`the_whole_chain_at_once_compiles` counted one `---- ` block per
operation in the chain. That was true while every operation was a point
operation, and stopped being true the moment a neighbourhood one existed:
clarity and texture are active in that test, and still emit no fused
block, because `compose_full` filters them out and the detail stage
dispatches them separately.
Counted now by asking each operation whether it has a detail stage --
the same question the composer's own filter asks -- rather than by
subtracting a number someone has to remember to update. Capture
sharpening and noise reduction are covered by this without another edit.
The render at the end is now `render_detailed`, which is not a
concession but the stronger test: with a neighbourhood operation active
the fused pass hands on linear working values and the last detail pass
performs the output transform, so rendering the fused half alone is the
mismatch `render_detailed` exists to reject -- and the detail passes are
generated WGSL with uniform blocks of their own, which is exactly what
"everything at once" is here to collide. It renders at 512 rather than
32 because a compositional radius is a fraction of the frame, and on a
32-pixel target every detail kernel rounds away to nothing.
Also records, in `texture_contributes_nothing_where_its_scale_does_not_exist`,
the seam this uncovered: an active detail operation whose kernel rounds
away composes an empty chain while the fused pass has already been
composed to hand on linear values, and nothing can then encode the
result. That test now asserts the property on the composed chain instead
of driving the unrenderable configuration.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A colour square wave built from equal, opposite swings of red and blue is
not a pure colour pattern: Rec. 709 weights them 0.2126 and 0.0722, so it
carries a luminance square wave of about a seventh of the swing underneath.
Correlating the raw red channel therefore reads a constant floor that the
chroma filter is not meant to remove, which compressed every ratio towards
one - enough that the resolution test could no longer tell a correct kernel
from one twice the size. Correlate the colour difference instead, and write
the derivation of each expected value into the test.
Carries the source's metadata all the way to the file the user hands over,
and proves in bytes that the coordinates do not come with it.
The privacy test was the piece that mattered and the piece that was wrong.
It searched the whole file for the two-byte hemisphere reference "N\0" or
"E\0", which is not a fingerprint of a GPS directory at all: sample 14 of the
sRGB tone curve inside the ICC profile every export embeds is 69, written as
`00 45`, and the next sample is below 256, so its high byte is `00`. Every
format would have failed a test about a colour profile. The needle is now the
twenty-four bytes a coordinate actually serialises to — three rationals, both
byte orders, since exif.rs writes little-endian and the tiff crate writes in
the host's — which cannot match by accident, and the retaining test asserts
the same needle is *present* so a search that could never find anything
cannot make the stripping test pass by being useless.
The batch exporter now hands the decoder's reading on to the encoder. It
already read the metadata for the orientation and the {date} token; passing
it through is what puts the camera, the lens and the rights statement into
the file. Nothing about privacy is decided there — dr-export takes that
decision once, from the settings.
The example passes it too, because it is the only place in the tree that
produces files a person can open in exiftool. A unit test can prove a GPS
directory is absent from a byte slice; only a real export proves a real
photograph comes out the far end still knowing which camera took it.
TRACES: FR-EXP-8
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
An active detail operation may emit no pass at a given render scale - the
honest answer for a sensor-sized radius on a heavy proxy. The fused composer
cannot see that, having no resolution to consult, so it had already stopped
short of the output transform and the frame died on a storage-format
mismatch. Compose a bodyless resolve pass in that case so the output
transform still happens exactly once.
every_operation_can_be_activated_together counted one block per operation
in the chain, which was true only while every operation was a point
function. A neighbourhood operation is a dispatch of its own and emits no
fused block, so the count now excludes the operations the detail chain
names, and each of them is separately asserted absent rather than the
comparison being loosened.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Capture sharpening as a two-pass unsharp mask in the detail stage: blur
along x, then along y, each pass applying a one-dimensional high-pass to
luminance so the composite preserves a flat field exactly and matches the
textbook kernel on any locally one-dimensional edge.
The radius is stated in source pixels and converted once per render, so a
radius tuned on a fit view is the radius the exported file gets. Below one
render pixel the operation declines to draw rather than showing sharpening
the file will not contain, and emits a single pass-through that still
carries the output transform.
The develop session now renders through render_detailed, which is what
lets an active neighbourhood operation reach the screen at all.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Four branches merged, each of which had regenerated this file against its own
tree. Those versions all disagreed and none was right for the union, which is
why the merges took whichever side was to hand and deferred to this: the matrix
is generated, so the only correct version is the one produced once, here, from
the merged source.
Checkpoint committed by the coordinator, not by the authoring agent: the
session hit its API limit mid-task and left this work uncommitted. Committed
so it survives, NOT because it is finished - expect failing tests and
half-applied changes. The agent resumes from here.
Checkpoint committed by the coordinator, not by the authoring agent: the
session hit its API limit mid-task and left this work uncommitted. Committed
so it survives, NOT because it is finished - expect failing tests and
half-applied changes. The agent resumes from here.
Checkpoint committed by the coordinator, not by the authoring agent: the
session hit its API limit mid-task and left this work uncommitted. Committed
so it survives, NOT because it is finished - expect failing tests and
half-applied changes. The agent resumes from here.
Checkpoint committed by the coordinator, not by the authoring agent: the
session hit its API limit mid-task and left this work uncommitted. Committed
so it survives, NOT because it is finished - expect failing tests and
half-applied changes. The agent resumes from here.
An operation with four curves and a panel that draws one plot needs a way to
say which. The panel finds out the way it finds out everything else: the
points are faceted with the subject they act on, consecutive parameters
sharing a subject are one curve, and a widget spanning several of them gets
a selector over their names. Nothing in ui/ contains the word "red", and an
operation that grows a fifth curve arrives with a fifth chip.
The names ride on the panel rather than on the curve's row, because a Slint
model is compared by identity: a fresh list built on every parameter event
would make the row look changed every time, and rewriting a row rebuilds the
element holding the drag in progress. That is the hazard the in-place point
update already exists to avoid.
Which curve is on show is interface state, not an edit. It changes no pixel,
so it takes no history step, reaches no sidecar, and redraws nothing — the
photograph on screen is already right.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The declaration in ops/tone_curve.yaml has claimed per-channel curves since
it was written — it is the justification for the operation carrying both
`tone` and `colour`. Only the master curve existed. This is the other three.
The master runs first and the channels grade its result. Both orders are
real images and they differ visibly, so the choice is made and written down
rather than left to the loop: a point placed on the blue curve should act on
the tone the photographer can see, which is what the master has already
produced. The other order anchors the grade to tones the master is about to
move, so adjusting contrast slides a warm shadow up into the midtones.
Every id that existed before today is spelled exactly as it was. The master
curve keeps `p2_y` and the new curves take `r_`, `g_` and `b_` prefixes, so
a sidecar written when there was one curve loads, means what it meant, and
renders the same shader — asserted on the generated source, not on the
parameter values. Nothing needed a version check because nothing was
renamed.
Each curve reaches the shader only when it has been moved off the diagonal,
so an S-curve and no colour work generates what it generated when this
operation held ten parameters instead of forty, down to the uniform names.
The monotonicity guarantee is enforced per curve: a coincident pair on blue
divides by zero exactly as thoroughly as one on the master.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A sheet over the grid, opened from the header beside "Add to collection" —
deliberately the same card, scrim and dismissal as the filing sheet, because
they are the same gesture applied to two kinds of label: pick the photographs,
then say what they are. A user who has filed a selection already knows how this
works.
A word the whole selection carries, a word only some of it carries, and a word
none of it carries are three visibly different marks. Half-applied shown as
applied would be a lie about photographs the user cannot see from here, so a
partial keyword draws a dash and says "3 of 12" beside it. Tapping a dash
completes the keyword rather than removing it, which is what it means nine times
in ten, and the tenth is one more tap away.
The vocabulary is answered against the selection in Rust and pulled when the
sheet opens rather than pushed on every selection change — the selection moves
on each arrow key and the sheet is shut for almost all of them.
Assign and unassign travel by name, so a word typed into the field and a word
tapped in the list are one path rather than two, and the sheet never has to
invent an identity for a keyword that does not exist yet.
One gap, commented at the call site: unlike a star or a flag, a keyword is not
queued to the image's sidecar, because the sidecar format has no field for one.
So it reaches the user's other devices through the catalog merge, and a deleted
catalog loses keywords where it would keep ratings.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Keywords are catalog state, and the catalog syncs. Without this, two devices
keywording the same library would resolve to whichever synced last, and an
afternoon of work would vanish with no sign it had ever happened.
The vocabulary merges per row on the rule collections already use: revision
first, timestamp only to break a tie, so a device with a skewed clock cannot win
by having the wrong idea of the time. Assignments merge as a set union, which is
FR-NC-9's principle applied to metadata instead of edit nodes — disjoint work
survives on both sides.
Three things needed care and are commented where they happen:
A deletion travels *by name*, not by identity. Both devices may have minted
their own uuid for one word before they ever synced, so deleting by uuid would
tombstone a row nothing was assigned to and leave every photograph still
carrying the word. The union then refuses to readmit a word a winning tombstone
has just removed — without that filter the remote's live assignments would
resurrect it on the very same pass.
Images are resolved by the server's file id first and the content hash second.
Membership has always used the hash alone, but the hash is computed only when
import dedup or a reconnect asks for it, which for most libraries is never — so
a hash-only union would have quietly done nothing for the ordinary photograph.
A word lands on the local default version. Version uuids do not reconcile in the
catalog at all: ensure_default_versions mints a fresh one per device, so a
uuid-keyed join would have unioned nothing.
Removal still does not propagate. That is the trade collection membership
already makes, for the same reason — an unwanted keyword is removed again in a
second, and a silently lost afternoon is not recoverable at all.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The catalog has been able to *find* by keyword since v1 — query.rs joins the
keywords table, matches it exactly, and substring-matches it for free text — and
nothing anywhere could ever put a word there. A user could filter to a keyword
they had no way to apply.
This is the missing half: create, rename, delete, list, assign, unassign, and
the two reads a panel needs. Bulk-only for assignment, because keywording a
selection is the common case rather than the exception — the photographer picks
out the frames with the puffin in them and applies "puffin" once, in one
transaction.
Schema v6 adds `keyword_terms`, and deliberately does *not* touch the v1 join.
The assignment keeps the word as text because the catalog is a rebuildable index
and the durable copies of that fact — the sidecar, XMP dc:subject — both carry a
string; a foreign key would mean a catalog rebuilt from sidecars had to invent
identity rows before it could record anything, and would break the query path
that already works. So the text is the fact, and the new table is only the
identity a rename and a deletion can be keyed on.
`keyword_terms.name` carries no unique index, which looks like an oversight and
is not: two devices that each type "Iceland" are both right until they meet, and
a constraint would abort the merge at that moment. Uniqueness is converged upon
instead — create resolves an existing name, fuse_duplicates collapses a
cross-device pair onto the smaller uuid.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Brings in the lens-profile and neighbourhood-operation work so the card
import is verified against what it will actually be merged into, rather
than against the tree it was written on.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Three lint findings and the gap the third one was pointing at.
`Context::library_label` was dead: the page named the folder on this machine
and said nothing at all about the server, which is half of what the Import
button commits to and the half that takes minutes rather than seconds. It now
names both, and states the order — copied and verified here first, then
uploaded (FR-NC-7b) — beside the destinations rather than beside the button,
because someone watching a slow upload needs to already know the photographs
are safe on disk.
The label is cached when the page opens rather than read in `render`: reaching
it goes through the context closure to the account, and `render` runs on every
keystroke.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The unit tests either side of the base curve check halves — that the shipped
database parses and lifts its midtones, and that the generated WGSL evaluates
a curve in the right place. Neither would notice if the two agreed with each
other and both were wrong: a curve packed into the wrong uniform slots, or a
flag read from the wrong component, satisfies both and renders nothing.
So render real pixels. A flat frame through a neutral edit, once with the
Canon EOS 6D's curve looked up by name from the YAML and once with the
identity, asserting what a base curve is actually for — midtones lifted,
black still black, white still white, monotone the whole way — plus the
number an unprofiled body must still produce, so "never worse than today"
is a value rather than a promise.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The fused pass hands a fragment a colour and no coordinate. That is what buys
one dispatch for a whole edit, and it is also a wall: sharpening, noise
reduction, clarity, texture, dehaze and spot removal are each defined by what
the neighbours are doing, and FR-DEV-3 and FR-DEV-8 ask for all six. None of
them could be written at any price.
So there is now a detail stage. An operation implements `Operation` for its
parameters exactly as before — the panel, the sidecar, the history and the
presets all work unchanged — and additionally returns `Affects::Detail` and a
`DetailStage` yielding one pass per dispatch. `Affects` grows the third variant
`docs/requirements.md:250` designed and nothing had cut.
Where the stage sits is a colour-science decision, not an arrangement of
convenience. It runs after every point operation and every mask layer, so an
amount chosen against a tone curve survives the curve moving; in linear sRGB
after the camera matrix, because camera RGB has no luminance to sharpen
against; and before the output transform and the clip, because FR-DEV-2 allows
one quantisation and a highlight clipped before a convolution grows a dark
ring. The fused pass therefore ends one of two ways, and when a detail stage
follows it hands on unclipped f16 and the last detail pass encodes.
At render resolution rather than on the source, which is the whole of FR-DSP-1:
a pass before the framing prologue would cost 24 MP to draw a 2 MP preview.
`RenderScale` is what makes that survivable — a radius is stored as a fraction
of the frame's shorter edge, exactly as a mask feather already is, or as a
count of source pixels, and converted per render. It also reports when a radius
is smaller than a proxy pixel rather than drawing a plausible lie; zooming to
1:1 makes the preview exact with no second path.
`Invalidation` gives FR-DEV-3d something to mean. Moving a detail parameter
leaves the colour key alone, so `AdjustPass` keeps the linear intermediate and
skips the fused dispatch: dragging a sharpening slider costs a convolution.
Moving exposure does re-run the detail passes, because they read what the
colour pass wrote, and there is no arrangement of keys that avoids it while
keeping sharpening after tone.
Validated by a separable box blur that is not a develop operation, behind the
`detail-probe` feature and absent from a shipping build. An abstraction with no
consumer is a guess; a box blur's answer is known in closed form, so the tests
assert every byte of the ramp rather than that the edge got softer.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Colour came from whichever matrix rawler happened to key `D65`, the second
one was discarded, and the rendering was left linear. That is the dcraw
default, and FR-DEV-3e names it as the reason people abandon a converter in
the first hour: correct in the abstract, flat and poor on skin in practice.
The decoder now builds a camera profile.
- `ColorMatrix1/2` and `CalibrationIlluminant1/2`. rawler surfaces these as
an illuminant-keyed map — for DNGs from the tags, and for native formats
from its own camera database — so a Canon CR2 arrives with a tungsten
matrix and a daylight matrix exactly as an Adobe DNG of the same frame
would. Dual-illuminant support is therefore not a DNG feature here.
- `ForwardMatrix1/2`, read straight from the root IFD, because rawler parses
them and never surfaces them. Where a file carries both, they replace the
inverted colour matrix: the same relationship measured in the direction
rendering actually wants, rather than an inversion that amplifies the
measurement error exactly where skin lives.
- `AsShotNeutral`, used to estimate what the scene was lit by and to
interpolate between the two calibrations in mireds. The estimate is
circular — the temperature needs a matrix and the matrix needs the
temperature — so it is a fixed point, three rounds, as Adobe's SDK does it.
Bodies calibrated at neither D65 nor A stopped rendering uncalibrated as a
side effect: a Phase One IQ3 carries D55 and D75 and used to get no matrix
at all.
And a base curve, applied per channel in camera RGB between the last
adjustment and the conversion out of camera space — a toe, a steep midtone
and a shoulder, which is the difference between a photograph and a scan of
one. It is not an edit: no slider, nothing in the sidecar, because it
belongs to the body rather than to anything anyone decided, and a sidecar is
shared between bodies. It is not a develop node either, and `ops/README.md`
now records why. It evaluates on the tone curve's own spline rather than a
second copy, so a profile author placing a control point and a photographer
dragging one mean the same thing by it.
The curves are data. `core/dr-decode/profiles/base_curves.yaml` ships inside
the binary as a floor and is superseded by any copy on disk carrying a
higher `version:`, so a body can be added and distributed without a release
— and, under the GPL, contributed. The comparison runs both ways: a stale
pack cannot hold an upgraded binary back at last year's rendering.
Canon EOS 6D and R6, Nikon Z 6 and D750, Sony A7 III and Fujifilm X-T3 ship
with their own curves. Every other body gets a conservative default, which
is much closer to right than the identity is for any of them. A JPEG gets
none — it has already been rendered once, by the camera.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
FR-CAT-10, FR-NC-7a and FR-NC-7b gained implementations; the two new
requirements also raise the denominator. 46.9% to 48.6%.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
The transport was built and had nowhere to aim: put_chunked has existed since
the connector landed, and the only things pushed through it are thumbnail
shards and the catalog snapshot.
The folder segments arrive already expanded, from dr_ingest::layout, rather
than being re-derived here. That split is what makes FR-NC-7a's first
consequence true — if this module worked out the folders from whatever the
local library happened to look like, two machines with differently organised
libraries would file the same photograph in two different places on one
server.
A name is resolved against one listing rather than a probe per candidate: a
day folder is one PROPFIND and the answer covers every collision in it, where
probing costs a round trip per attempt over a link that may be mobile data.
Two cameras both produce IMG_0001.CR3, and the second must not overwrite the
first.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
dtourolle
